FieldSpec
Equipment menu

Machine models

CASE CX210B to CX290B specifications

CX B-Series work modes, compact swing and clearance measurements

The CX210B and CX240B share a documented B-Series control arrangement, while the CX290B has its own front and dimensions. The CX225 column needs separate minimum-swing-radius identification. Establish the exact carrier and boom before using this group to judge a working envelope or hydraulic complaint.

The CX210B/CX240B selector changes the work setting

The paired brochure separates precision A mode, general H mode and the faster SP setting. Its automatic pressure boost is another function. Record the selected mode during a demonstration; a machine doing careful lifting is not necessarily showing the response intended for maximum production.

That document also distinguishes hydraulic-reservoir capacity from the full system. Its dimensional drawing labels undercarriage ground clearance separately from clearance beneath the upper structure. The corrected CX240B entries follow those separate measurements; an incorrect unit can make the chassis appear much taller than the manufacturer's drawing.

Original AME5304CCGB range brochure,pp4,8–9: modes, fluid compartments and two clearance measurements

The CX290B dimensions belong to its own monoboom

The larger-machine brochure gives a dedicated CX290B drawing and several dipper lengths. The carrier clearances stay in that drawing, while the depth and dump-height figures belong to the chosen dipper. Do not borrow a CX350B dimension from the adjacent column to fill a CX290B field.

Original AME5305CCGB range brochure,pp9–10: separateCX290B carrier and dipper configurations

Standby pump control differs from an engine shutdown

The February 2007 training sample explains negative control at neutral and a separate power-save solenoid action. Its stated purpose is to reduce standby losses. That explains why a neutral-control observation needs the pilot and power-save state recorded; it does not diagnose an excavator that stalls or loses a function.

Original Monthyon training-centre sample,February2007,section6-6–6-8: negative control and standby power save

Bucket-link lubrication is an exception in the CX210B brochure

The CX210B publication describes extended-maintenance bushings but keeps a separate interval for bucket-link pins. A general claim of extended greasing intervals should not erase that exception from a service history.

Original CX210B brochure,p6: EMS bushings and bucket-link exception

The older minimum-swing-radius brochure positions the CX225 boom foot and counterweight to reduce the work envelope. That is a different selection question from simply choosing a larger conventional B-Series excavator. Its regional engine edition also differs, so its headline power must not replace the CX225 column without an identification match.

Original MSRCB01 minimum-swing-radius brochure:CX225 layout and regional equipment scope
Confirmed CASE corrections; earlier source entries retained as rejected quantities or units
Model and fieldEarlier entryDocumented interpretation
CX240B Ground Clearance18 ft0.46 m; Lower-frame ground clearance, standard monoboom
CX240B Removal Counterweight Clearance43 ft1.10 m; Upperstructure ground clearance, standard monoboom
CX290B Ground Clearance19 ft0.47 m; Lower-frame ground clearance,6.15mmonoboom
CX290B Removal Counterweight Clearance47 ft1.19 m; Upperstructure ground clearance,6.15mmonoboom
Entries in this reference
Listing-entry count
4
Short answer

CASE CX210B to CX290B: full-size excavators.

Selected configuration figures
ConfigurationDocumented field and quantity
CX210B
Net Power
157 hp
Operating Weight
47,400 lb
CX225
Net Power
153 hp
Operating Weight
53,223 lb
CX240B
Net Power
177 hp
Operating Weight
55,120 lb
CX290B
Net Power
207 hp
Operating Weight
65,697 lb
CX210B to CX290B specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
CASECX210B to CX290B4CX210B, CX225, CX240B, and CX290B
Boom/Stick Option (Hex) 1
SpecificationCX210BCX225CX240BCX290B
Shipping Length Of Unit30.84 ft29 ft32.5 ft34.42 ft
Shipping Height Of Unit9.75 ft9.75 ft10.86 ft11.36 ft
Max Cutting Height31.67 ft35.83 ft33 ft34.08 ft
Max Loading Height22.33 ft26.33 ft23.17 ft24.17 ft
Max Reach Along Ground31.92 ft31.92 ft34.83 ft36.08 ft
Max Vertical Wall Digging Depth19.58 ft19.93 ft21.92 ft22 ft
Max Digging Depth21.83 ft22 ft24.33 ft24.92 ft
Boom/Stick Option (Hex) 1Boom 18'8" (5700mm)/ Stick 9'8" (2940 mm)Boom 18'8" (5700mm)/ Stick 9'10" (3000 mm)Boom 19'2" (5800mm)/ Stick 11'7" (3520 mm)Boom 20'2" (6150mm)/ Stick 11'10" (3600 mm)
Dimensions and weight
SpecificationCX210BCX225CX240BCX290B
Ground Clearance1.5 ftRejected source unit: 18 ft0.46 m0.47 m
Height To Top Of Cab9.67 ft9.75 ft9.83 ft10.08 ft
Width To Outside Of Tracks10.5 ft10.5 ft11.08 ft11.17 ft
Length Of Track On Ground12 ft12 ft12.58 ft13.08 ft
Tail Swing Radius9 ft5.67 ft9.67 ft10.33 ft
Removal Counterweight Clearance3.42 ftRejected source unit: 40 ft1.10 m1.19 m
Undercarriage
SpecificationCX210BCX225CX240BCX290B
Shoe Size31.5 in31.5 in31.5 in31.5 in
Number Of Shoes Per Side49495150
Ground Pressure5.2 psi5.5 psi5.2 psi6.2 psi
Max Travel Speed3.5 mph3.1 mph3.4 mph3.5 mph
Number Of Track Rollers Per Side8899
Number Of Carrier Rollers Per Side2222
Drawbar Pull42,534 lb42,039 lb45,254 lb52,425 lb
SpecificationCX225CX240BCX290B
Track Gauge7.85 ft8.5 ft8.5 ft
Engine
SpecificationCX210BCX225CX240BCX290B
Number Of Cylinders4446
Engine Model4HK1X, Tier III certifiedAI-4HK1X, Tier III certified4HK1X, Tier III certified6HK1YSS, Tier III certified
Net Power157 hp153 hp177 hp207 hp
Power Measured @1,800 rpm1,800 rpm2,000 rpm1,800 rpm
Max Torque463 lb-ft454 lb-ft469 lb-ft627 lb-ft
Displacement317 cu in317 cu in317 cu in475 cu in
Aspirationturbochargedturbochargedturbochargedturbocharged
Torque Measured @1,500 rpm1,500 rpm1,500 rpm1,500 rpm
Operational
SpecificationCX210BCX225CX240BCX290B
Operating Weight47,400 lb53,223 lb55,120 lb65,697 lb
Fuel Capacity108.3 gal70 gal108.3 gal118.9 gal
Cooling System Fluid Capacity6.8 gal6.8 gal6.8 gal7.7 gal
Hydraulic System Fluid Capacity63 gal54 gal66 gal79.3 gal
Engine Oil Capacity6.1 gal6.1 gal6.1 gal10.1 gal
Operating Voltage24 V24 V24 V24 V
Swing Drive Fluid Capacity1.4 gal1.4 gal2.6 gal1.6 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps
Hydraulic Pump Flow Capacity55.8 gpm50.2 gpm32.7 gpm64.2 gpm
SpecificationCX240BCX290B
Hydraulic System Relief Valve Pressure4,975 psi4,975 psi
Swing Mechanism
SpecificationCX210BCX225CX240BCX290B
Swing Speed11.5 rpm10.6 rpm10.7 rpm10.2 rpm
Buckets
SpecificationCX210BCX225CX240BCX290B
Minimum Bucket Capacity0.7 yd30.6 yd30.8 yd30.8 yd3
Maximum Bucket Capacity1.6 yd31.6 yd32.1 yd32.2 yd3
SpecificationCX225
Reference Bucket Capacity1.1 yd3
Variants — Source comparison annotation
Source guideDiffering-field count reported
CX210B to CX290B38
Ratios
FigureCX210BCX225CX240BCX290B
Engine horsepower per 1,000 lb of weight3.32.93.23.2
Fuel tank per engine horsepower0.69 gal0.46 gal0.61 gal0.57 gal
FigureCX240BCX290B
Hydraulic power from the listed pump flow and relief pressure94.9 hp186.3 hp

CX210B to CX290B: owner reports

Sources: 3 forum discussions about the Case CX210 excavators; heavyequipmentforums.com.Sources: 3 forum discussions about the Case CX240B excavators; heavyequipmentforums.com.
CX210B to CX290B: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumsfull-size excavatorCASE and the CX290 line that the CX210B, CX240B, CX290B belongs to (no title names the exact model)10
Topics named by those titles
Title topicTitles
electrical and sensors2
Topic in the titleThreadsShare of matching threads
electrical and sensors220%
Used market for the CX210B to CX290B — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderCASE full-size excavator21
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
CX210B132007 to 2012$14,802$89,500$34,160None shown
CX22522006 to 2007$17,080$48,215$32,648None shown
CX240B52007 to 2021$21,800$55,000$34,160None shown
CX290B12009$38,714$38,714$38,714None shown
CX210B to CX290B: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionCASE together with the full-size excavator CX210B, CX225, CX240B, CX290BNo matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
  • Reference site: CASE CX210B — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE CX225 — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE CX240B — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE CX290B — RitchieSpecs. Observed 2026-09-24.
Forum threads
Forum threads
Used-market listings
Federal agency data

CASE CX210B to CX290B: Configuration records

CX210B
SpecificationSource figure
Boom/Stick Option (Hex) 1
Max Vertical Wall Digging Depth19.58 ft
Boom/Stick Option (Hex) 1Boom 18'8" (5700mm)/ Stick 9'8" (2940 mm)
Dimensions and weight
Height To Top Of Cab9.67 ft
Width To Outside Of Tracks10.5 ft
Length Of Track On Ground12 ft
Tail Swing Radius9 ft
Removal Counterweight Clearance3.42 ft
Undercarriage
Shoe Size31.5 in
Ground Pressure5.2 psi
Number Of Track Rollers Per Side8
Number Of Shoes Per Side49
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders4
Power Measured @1,800 rpm
Max Torque463 lb-ft
Aspirationturbocharged
Torque Measured @1,500 rpm
Net Power157 hp
Operational
Fuel Capacity108.3 gal
Cooling System Fluid Capacity6.8 gal
Hydraulic System Fluid Capacity63 gal
Hydraulic Pump Flow Capacity55.8 gpm
Operating Voltage24 V
Engine Oil Capacity6.1 gal
Swing Drive Fluid Capacity1.4 gal
Alternator Supplied Amperage50 amps
Buckets
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity1.6 yd3
Additional specifications
Shipping Length Of Unit30.84 ft
Shipping Height Of Unit9.75 ft
Max Cutting Height31.67 ft
Max Loading Height22.33 ft
Max Reach Along Ground31.92 ft
Max Digging Depth21.83 ft
Ground Clearance1.5 ft
Max Travel Speed3.5 mph
Drawbar Pull42,534 lb
Engine Model4HK1X, Tier III certified
Displacement317 cu in
Operating Weight47,400 lb
Swing Speed11.5 rpm

Source

CX225
SpecificationSource figure
Boom/Stick Option (Hex) 1
Max Vertical Wall Digging Depth19.93 ft
Boom/Stick Option (Hex) 1Boom 18'8" (5700mm)/ Stick 9'10" (3000 mm)
Dimensions and weight
Height To Top Of Cab9.75 ft
Width To Outside Of Tracks10.5 ft
Length Of Track On Ground12 ft
Tail Swing Radius5.67 ft
Removal Counterweight Clearance40 ft
Undercarriage
Track Gauge7.85 ft
Shoe Size31.5 in
Ground Pressure5.5 psi
Number Of Track Rollers Per Side8
Number Of Shoes Per Side49
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders4
Power Measured @1,800 rpm
Max Torque454 lb-ft
Aspirationturbocharged
Torque Measured @1,500 rpm
Net Power153 hp
Operational
Fuel Capacity70 gal
Cooling System Fluid Capacity6.8 gal
Hydraulic System Fluid Capacity54 gal
Hydraulic Pump Flow Capacity50.2 gpm
Operating Voltage24 V
Engine Oil Capacity6.1 gal
Swing Drive Fluid Capacity1.4 gal
Alternator Supplied Amperage50 amps
Buckets
Reference Bucket Capacity1.1 yd3
Minimum Bucket Capacity0.6 yd3
Maximum Bucket Capacity1.6 yd3
Additional specifications
Shipping Length Of Unit29 ft
Shipping Height Of Unit9.75 ft
Max Cutting Height35.83 ft
Max Loading Height26.33 ft
Max Reach Along Ground31.92 ft
Max Digging Depth22 ft
Max Travel Speed3.1 mph
Drawbar Pull42,039 lb
Engine ModelAI-4HK1X, Tier III certified
Displacement317 cu in
Operating Weight53,223 lb
Swing Speed10.6 rpm

Source

CX240B
SpecificationSource figure
Boom/Stick Option (Hex) 1
Max Vertical Wall Digging Depth21.92 ft
Boom/Stick Option (Hex) 1Boom 19'2" (5800mm)/ Stick 11'7" (3520 mm)
Dimensions and weight
Height To Top Of Cab9.83 ft
Width To Outside Of Tracks11.08 ft
Length Of Track On Ground12.58 ft
Tail Swing Radius9.67 ft
Upperstructure Ground Clearance — Upperstructure ground clearance, standard monoboom1.10 m [source]
Undercarriage
Track Gauge8.5 ft
Shoe Size31.5 in
Ground Pressure5.2 psi
Number Of Track Rollers Per Side9
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders4
Power Measured @2,000 rpm
Max Torque469 lb-ft
Aspirationturbocharged
Torque Measured @1,500 rpm
Net Power177 hp
Operational
Fuel Capacity108.3 gal
Cooling System Fluid Capacity6.8 gal
Hydraulic System Fluid Capacity66 gal
Hydraulic Pump Flow Capacity32.7 gpm
Operating Voltage24 V
Engine Oil Capacity6.1 gal
Swing Drive Fluid Capacity2.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,975 psi
Buckets
Minimum Bucket Capacity0.8 yd3
Maximum Bucket Capacity2.1 yd3
Additional specifications
Shipping Length Of Unit32.5 ft
Shipping Height Of Unit10.86 ft
Max Cutting Height33 ft
Max Loading Height23.17 ft
Max Reach Along Ground34.83 ft
Max Digging Depth24.33 ft
Max Travel Speed3.4 mph
Drawbar Pull45,254 lb
Engine Model4HK1X, Tier III certified
Displacement317 cu in
Operating Weight55,120 lb
Swing Speed10.7 rpm
Ground Clearance — Lower-frame ground clearance, standard monoboom0.46 m [source]

Source

CX290B
SpecificationSource figure
Boom/Stick Option (Hex) 1
Max Vertical Wall Digging Depth22 ft
Boom/Stick Option (Hex) 1Boom 20'2" (6150mm)/ Stick 11'10" (3600 mm)
Dimensions and weight
Height To Top Of Cab10.08 ft
Width To Outside Of Tracks11.17 ft
Length Of Track On Ground13.08 ft
Tail Swing Radius10.33 ft
Upperstructure Ground Clearance — Upperstructure ground clearance,6.15mmonoboom1.19 m [source]
Undercarriage
Track Gauge8.5 ft
Shoe Size31.5 in
Ground Pressure6.2 psi
Number Of Track Rollers Per Side9
Number Of Shoes Per Side50
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Power Measured @1,800 rpm
Max Torque627 lb-ft
Aspirationturbocharged
Torque Measured @1,500 rpm
Net Power207 hp
Operational
Fuel Capacity118.9 gal
Cooling System Fluid Capacity7.7 gal
Hydraulic System Fluid Capacity79.3 gal
Hydraulic Pump Flow Capacity64.2 gpm
Operating Voltage24 V
Engine Oil Capacity10.1 gal
Swing Drive Fluid Capacity1.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,975 psi
Buckets
Minimum Bucket Capacity0.8 yd3
Maximum Bucket Capacity2.2 yd3
Additional specifications
Shipping Length Of Unit34.42 ft
Shipping Height Of Unit11.36 ft
Max Cutting Height34.08 ft
Max Loading Height24.17 ft
Max Reach Along Ground36.08 ft
Max Digging Depth24.92 ft
Max Travel Speed3.5 mph
Drawbar Pull52,425 lb
Engine Model6HK1YSS, Tier III certified
Displacement475 cu in
Operating Weight65,697 lb
Swing Speed10.2 rpm
Ground Clearance — Lower-frame ground clearance,6.15mmonoboom0.47 m [source]

Source

Compare CASE CX210B, CX225, CX240B, CX290B
Boom/Stick Option (Hex) 1
SpecificationCX210BCX225CX240BCX290B
Shipping Length Of Unit30.84 ft29 ft32.5 ft34.42 ft
Shipping Height Of Unit9.75 ft9.75 ft10.86 ft11.36 ft
Max Cutting Height31.67 ft35.83 ft33 ft34.08 ft
Max Loading Height22.33 ft26.33 ft23.17 ft24.17 ft
Max Reach Along Ground31.92 ft31.92 ft34.83 ft36.08 ft
Max Vertical Wall Digging Depth19.58 ft19.93 ft21.92 ft22 ft
Max Digging Depth21.83 ft22 ft24.33 ft24.92 ft
Boom/Stick Option (Hex) 1Boom 18'8" (5700mm)/ Stick 9'8" (2940 mm)Boom 18'8" (5700mm)/ Stick 9'10" (3000 mm)Boom 19'2" (5800mm)/ Stick 11'7" (3520 mm)Boom 20'2" (6150mm)/ Stick 11'10" (3600 mm)
Dimensions and weight
SpecificationCX210BCX225CX240BCX290B
Height To Top Of Cab9.67 ft9.75 ft9.83 ft10.08 ft
Width To Outside Of Tracks10.5 ft10.5 ft11.08 ft11.17 ft
Length Of Track On Ground12 ft12 ft12.58 ft13.08 ft
Tail Swing Radius9 ft5.67 ft9.67 ft10.33 ft
Removal Counterweight Clearance3.42 ft40 ft1.10 m [source]1.19 m [source]
Undercarriage
SpecificationCX210BCX225CX240BCX290B
Shoe Size31.5 in31.5 in31.5 in31.5 in
Number Of Shoes Per Side49495150
Ground Pressure5.2 psi5.5 psi5.2 psi6.2 psi
Max Travel Speed3.5 mph3.1 mph3.4 mph3.5 mph
Number Of Track Rollers Per Side8899
Number Of Carrier Rollers Per Side2222
Drawbar Pull42,534 lb42,039 lb45,254 lb52,425 lb
Engine
SpecificationCX210BCX225CX240BCX290B
Number Of Cylinders4446
Engine Model4HK1X, Tier III certifiedAI-4HK1X, Tier III certified4HK1X, Tier III certified6HK1YSS, Tier III certified
Net Power157 hp153 hp177 hp207 hp
Power Measured @1,800 rpm1,800 rpm2,000 rpm1,800 rpm
Max Torque463 lb-ft454 lb-ft469 lb-ft627 lb-ft
Displacement317 cu in317 cu in317 cu in475 cu in
Aspirationturbochargedturbochargedturbochargedturbocharged
Torque Measured @1,500 rpm1,500 rpm1,500 rpm1,500 rpm
Operational
SpecificationCX210BCX225CX240BCX290B
Operating Weight47,400 lb53,223 lb55,120 lb65,697 lb
Fuel Capacity108.3 gal70 gal108.3 gal118.9 gal
Cooling System Fluid Capacity6.8 gal6.8 gal6.8 gal7.7 gal
Hydraulic System Fluid Capacity63 gal54 gal66 gal79.3 gal
Engine Oil Capacity6.1 gal6.1 gal6.1 gal10.1 gal
Operating Voltage24 V24 V24 V24 V
Swing Drive Fluid Capacity1.4 gal1.4 gal2.6 gal1.6 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps
Hydraulic Pump Flow Capacity55.8 gpm50.2 gpm32.7 gpm64.2 gpm
Swing Mechanism
SpecificationCX210BCX225CX240BCX290B
Swing Speed11.5 rpm10.6 rpm10.7 rpm10.2 rpm
Buckets
SpecificationCX210BCX225CX240BCX290B
Minimum Bucket Capacity0.7 yd30.6 yd30.8 yd30.8 yd3
Maximum Bucket Capacity1.6 yd31.6 yd32.1 yd32.2 yd3

More in CASE: WX185/WX210/WX240, 9020B–CX180, CX220E/CX260E.