Cat 926K specifications and identity checks

Resolve the 926K name before choosing specifications

A search result labelled 926K does not settle which loader is being offered. RitchieSpecs publishes that name with a four-cylinder 3204 engine and powershift transmission. Its separate unsuffixed 926 entry gives the same engine designation, power rating and operating weight, with small differences in several dimensions and capacities.

This similarity is a reason to check identification, not evidence that all K-labelled machines have those components.

The engine and transmission descriptions are especially useful for separating the records. A seller's modern-loader description cannot establish that the older four-cylinder and powershift figures apply. The reference tables below retain their published attribution; they are not a serial-specific manufacturer sheet.

Caterpillar's small-loader accessory guide contains a naming discrepancy of its own. The ISO coupler table prints 926K beside prefix KW4, while the guide's cover and coupler-ready table identify KW4 as 924K. The ISO entry describes an electrohydraulic coupler, requires the appropriate valve and hydraulic lines, and calls for Cat Electronic Technician to finish installation.

That row therefore cannot establish a loader's engine identity or authorize a kit order from the model name alone. Match the complete product identification to the applicable parts arrangement before ordering.

Borusan Cat provides another concrete example: its page address identifies 926M, but the introduction says 926K. The body describes a C7.1 engine, hydrostatic drivetrain and optimized Z-bar linkage. Those descriptions cannot be combined with the 3204 powershift record to make one specification set.

The disagreement remains visible in the sources; it is not resolved by choosing whichever power figure looks more attractive.

For a machine advertised as 926K, obtain photographs of the product plate and installed engine identification. Confirm whether the loader actually has the powershift arrangement described in the reference entry or the hydrostatic equipment described by the dealer page. Then establish its fitted coupler, bucket and applicable serial-range documents.

Resolve those questions before using the listed tipping weight for an attachment decision.