Machine models
New Holland C232 to L234 specifications
| Listing-entry count |
|---|
| 5 |
Short answer
New Holland C232 to L234: wheeled compact loaders.
| Configuration | Documented field and quantity |
|---|---|
| C232 |
|
| L221 |
|
| L228 |
|
| L230 |
|
| L234 |
|
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| New Holland | C232 to L234 | 5 | C232, L221, L228, L230, and L234 |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Ground Clearance | 9.57 in | 8 in | 8 in | 9.57 in | 9.57 in |
| Bottom Of Level Bucket, Fully Raised | 124.22 in | 116.15 in | 122.64 in | 122.64 in | 124.22 in |
| Bucket Hinge Pin | 131.11 in | 123 in | 129.41 in | 130.99 in | 130.99 in |
| Overall Width | 75.99 in | 5.76 ft | 5.81 ft | 6.34 ft | 6.34 ft |
| Rollback, Bucket At Full Height | 84.8 degrees | 99 degrees | 84.8 degrees | 84.8 degrees | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees | 31 degrees | 33.8 degrees | 32.8 degrees | 32.8 degrees |
| Top Of ROPS | 80.44 in | 78.67 in | 78.82 in | 80.4 in | 80.4 in |
| Angle Of Departure | 32 degrees | 25 degrees | 23.5 degrees | 26.5 degrees | 26.5 degrees |
| Specification | C232 |
|---|---|
| Clearance Circle Rear | 70.44 in |
| Clearance Circle Without Bucke | 56.23 in |
| Dump Reach - General Purpose | 34.45 in |
| Ground Pressure | 4.2 psi |
| Track On Ground | 64.53 in |
| Specification | L221 | L228 | L230 | L234 |
|---|---|---|---|---|
| Wheelbase | 3.71 ft | 4.34 ft | 4.34 ft | 4.34 ft |
| Dump Angle | 40 degrees | 54.7 degrees | 54.7 degrees | 54.7 degrees |
| Specification | C232 |
|---|---|
| Horsepower, Net-SAE J1349 | 68 hp |
| Max Torque | 232 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Fuel Injection | HPCR Direct | HPCR Direct | HPCR Direct | HPCR Direct | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 74 hp | 74 hp | 74 hp | 90 hp | 90 hp |
| Engine Model | F5H FL463A*F001 | F5H FL463 | F5H FL463A*F001 | F5BFL413E*B002 | F5BFL413E*B002 |
| Displacement | 207.5 cu in | 207.5 cu in | 207.5 cu in | 207.5 cu in | 207.5 cu in |
| Bore | 3.9 in | 3.9 in | 3.9 in | 3.9 in | 3.9 in |
| Stroke | 4.4 in | 4.4 in | 4.4 in | 4.4 in | 4.4 in |
| Specification | L221 | L228 | L230 | L234 |
|---|---|---|---|---|
| Air Intake | Turbocharged with external EGR | Turbocharged Aftercooled with external EGR | Turbocharged Aftercooled with external EGR | Turbocharged Aftercooled with external EGR |
| Horsepower Per SAE J1349 Net | 68 hp | 68 hp | 84 hp | 84 hp |
| Rated Speed | 2,500 rpm | 2,500 rpm | 2,500 rpm | 2,500 rpm |
| Peak Torque | 231.6 lb-ft | 231.6 lb-ft | 282.5 lb-ft | 282.5 lb-ft |
| Specification | C232 |
|---|---|
| Engine Oil W/ Filter Change | 2.3 gal |
| System Capacity With Filter | 11.8 gal |
| Specification | C232 | L221 | L228 | L234 |
|---|---|---|---|---|
| Fuel Tank | 25.5 gal | 19.5 gal | 25.5 gal | 25.5 gal |
| Specification | L221 | L228 | L234 |
|---|---|---|---|
| Engine Oil With Filter | 2.5 gal | 2.3 gal | 2.3 gal |
| Chain Tanks | 6.9 gal | 5.9 gal | 5.9 gal |
| Specification | L234 |
|---|---|
| DEF Tank | 2.9 gal |
| Specification | C232 |
|---|---|
| Rated Operating Load, 35% Tip | 2,244 lb |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Tipping Load | 6,398 lb | 3,999 lb | 5,600 lb | 6,001 lb | 6,799 lb |
| Operating Weight | 9,634 lb | 6,967 lb | 8,245 lb | 8,735 lb | 8,918 lb |
| Breakout Force, Bucket Cylinder | 7,509 lb | 7,261 lb | 8,610 lb | 8,610 lb | 9,330 lb |
| Breakout Force, Lift Cylinder | 4,833 lb | 4,564 lb | 6,137 lb | 6,340 lb | 6,924 lb |
| Rated Operating Load, 50% Tip | 3,199 lb | 1,995 lb | 2,800 lb | 2,998 lb | 3,400 lb |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Travel Speed, Low Range | 5.1 mph | 7.8 mph | 7 mph | 7.7 mph | 7.7 mph |
| Travel Speed, High Range | 7.6 mph | 11.4 mph | 10.5 mph | 11.5 mph | 11.5 mph |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Optional High Flow | 37.6 gpm | 33.2 gpm | 37.6 gpm | 37.6 gpm | 37.6 gpm |
| Relief Valve Pressure | 3,046 psi | 3,046 psi | 3,046 psi | 3,046 psi | 3,450 psi |
| Specification | C232 |
|---|---|
| Pump Flow | 24.2 gpm |
| Specification | L221 | L228 | L230 | L234 |
|---|---|---|---|---|
| Standard Pump Flow | 24.4 gpm | 24.2 gpm | 24.2 gpm | 24.2 gpm |
| Specification | L221 | L228 | L234 |
|---|---|---|---|
| Shipping | 6,669 lb | 7,562 lb | 8,576 lb |
| Source guide | Differing-field count reported |
|---|---|
| C232 to L234 | 44 |
| Figure | C232 |
|---|---|
| Engine horsepower per 1,000 lb of weight | 7.1 |
| Fuel tank per engine horsepower | 0.38 gal |
New Holland C232 to L234: wheeled compact loader
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | wheeled compact loader | New Holland and the C232, L228, L230 | 20 |
| Title topic | Titles |
|---|---|
| starting and cranking | 3 |
| hydraulics | 3 |
| electrical and sensors | 2 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| starting and cranking | 3 | 15% |
| hydraulics | 3 | 15% |
| electrical and sensors | 2 | 10% |
- 2017 New Holland C232 Crank No Start W Codes Service Manuals Jump Over Serial For Needed Wiring Info (Heavy Equipment Forums, 2025-10-20)
- New Holland L230 Engine Tag Location (Heavy Equipment Forums, 2025-08-04)
- NH C232 Crank No Start (Heavy Equipment Forums, 2025-05-07)
- C232 New Holland Coolant Temp (Heavy Equipment Forums, 2024-11-16)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | New Holland wheeled compact loader | 222 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| C232 | 70 | 2012 to 2020 | $26,900 | $59,000 | $42,200 | 1,136 |
| L221 | 6 | 2015 to 2018 | $22,500 | $38,000 | $32,750 | 3,445 |
| L228 | 90 | 2016 to 2021 | $24,500 | $48,975 | $34,500 | 2,837 |
| L230 | 27 | 2011 to 2016 | $15,500 | $48,900 | $28,975 | 1,172 |
| L234 | 29 | 2017 to 2020 | $17,900 | $53,500 | $42,500 | 1,648 |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | New Holland together with the wheeled compact loader C232, L221, L228, L230 | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Used-market listings |
|
| Federal agency data |
|
New Holland C232 to L234: Configuration records
C232
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Ground Clearance | 9.57 in |
| Bottom Of Level Bucket, Fully Raised | 124.22 in |
| Bucket Hinge Pin | 131.11 in |
| Clearance Circle Rear | 70.44 in |
| Clearance Circle Without Bucke | 56.23 in |
| Dump Reach - General Purpose | 34.45 in |
| Ground Pressure | 4.2 psi |
| Overall Width | 75.99 in |
| Rollback, Bucket At Full Height | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees |
| Top Of ROPS | 80.44 in |
| Angle Of Departure | 32 degrees |
| Track On Ground | 64.53 in |
| Engine | |
| Engine Model | F5H FL463A*F001 |
| Displacement | 207.5 cu in |
| Horsepower, Net-SAE J1349 | 68 hp |
| Fuel Injection | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 74 hp |
| Max Torque | 232 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Bore | 3.9 in |
| Stroke | 4.4 in |
| Capacities | |
| Engine Oil W/ Filter Change | 2.3 gal |
| Fuel Tank | 25.5 gal |
| System Capacity With Filter | 11.8 gal |
| Performance | |
| Rated Operating Load, 35% Tip | 2,244 lb |
| Tipping Load | 6,398 lb |
| Breakout Force, Bucket Cylinder | 7,509 lb |
| Breakout Force, Lift Cylinder | 4,833 lb |
| Rated Operating Load, 50% Tip | 3,199 lb |
| Power Train | |
| Travel Speed, Low Range | 5.1 mph |
| Travel Speed, High Range | 7.6 mph |
| Hydraulic System | |
| Optional High Flow | 37.6 gpm |
| Pump Flow | 24.2 gpm |
| Additional specifications | |
| Operating Weight | 9,634 lb |
| Relief Valve Pressure | 3,046 psi |
L221
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Ground Clearance | 8 in |
| Wheelbase | 3.71 ft |
| Bottom Of Level Bucket, Fully Raised | 116.15 in |
| Bucket Hinge Pin | 123 in |
| Overall Width | 5.76 ft |
| Rollback, Bucket At Full Height | 99 degrees |
| Rollback, Bucket On Ground | 31 degrees |
| Top Of ROPS | 78.67 in |
| Angle Of Departure | 25 degrees |
| Dump Angle | 40 degrees |
| Engine | |
| Engine Model | F5H FL463 |
| Displacement | 207.5 cu in |
| Fuel Injection | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 74 hp |
| Bore | 3.9 in |
| Stroke | 4.4 in |
| Air Intake | Turbocharged with external EGR |
| Horsepower Per SAE J1349 Net | 68 hp |
| Rated Speed | 2,500 rpm |
| Peak Torque | 231.6 lb-ft |
| Capacities | |
| Fuel Tank | 19.5 gal |
| Engine Oil With Filter | 2.5 gal |
| Chain Tanks | 6.9 gal |
| Performance | |
| Tipping Load | 3,999 lb |
| Breakout Force, Bucket Cylinder | 7,261 lb |
| Breakout Force, Lift Cylinder | 4,564 lb |
| Rated Operating Load, 50% Tip | 1,995 lb |
| Power Train | |
| Travel Speed, Low Range | 7.8 mph |
| Travel Speed, High Range | 11.4 mph |
| Hydraulic System | |
| Optional High Flow | 33.2 gpm |
| Standard Pump Flow | 24.4 gpm |
| Weights | |
| Shipping | 6,669 lb |
| Additional specifications | |
| Operating Weight | 6,967 lb |
| Relief Valve Pressure | 3,046 psi |
L228
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Ground Clearance | 8 in |
| Wheelbase | 4.34 ft |
| Bottom Of Level Bucket, Fully Raised | 122.64 in |
| Bucket Hinge Pin | 129.41 in |
| Overall Width | 5.81 ft |
| Rollback, Bucket At Full Height | 84.8 degrees |
| Rollback, Bucket On Ground | 33.8 degrees |
| Top Of ROPS | 78.82 in |
| Angle Of Departure | 23.5 degrees |
| Dump Angle | 54.7 degrees |
| Engine | |
| Engine Model | F5H FL463A*F001 |
| Displacement | 207.5 cu in |
| Fuel Injection | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 74 hp |
| Bore | 3.9 in |
| Stroke | 4.4 in |
| Air Intake | Turbocharged Aftercooled with external EGR |
| Horsepower Per SAE J1349 Net | 68 hp |
| Rated Speed | 2,500 rpm |
| Peak Torque | 231.6 lb-ft |
| Capacities | |
| Fuel Tank | 25.5 gal |
| Engine Oil With Filter | 2.3 gal |
| Chain Tanks | 5.9 gal |
| Performance | |
| Tipping Load | 5,600 lb |
| Breakout Force, Bucket Cylinder | 8,610 lb |
| Breakout Force, Lift Cylinder | 6,137 lb |
| Rated Operating Load, 50% Tip | 2,800 lb |
| Power Train | |
| Travel Speed, Low Range | 7 mph |
| Travel Speed, High Range | 10.5 mph |
| Hydraulic System | |
| Optional High Flow | 37.6 gpm |
| Standard Pump Flow | 24.2 gpm |
| Weights | |
| Shipping | 7,562 lb |
| Additional specifications | |
| Operating Weight | 8,245 lb |
| Relief Valve Pressure | 3,046 psi |
L230
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Ground Clearance | 9.57 in |
| Wheelbase | 4.34 ft |
| Bottom Of Level Bucket, Fully Raised | 122.64 in |
| Bucket Hinge Pin | 130.99 in |
| Overall Width | 6.34 ft |
| Rollback, Bucket At Full Height | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees |
| Top Of ROPS | 80.4 in |
| Angle Of Departure | 26.5 degrees |
| Dump Angle | 54.7 degrees |
| Engine | |
| Engine Model | F5BFL413E*B002 |
| Displacement | 207.5 cu in |
| Fuel Injection | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 90 hp |
| Bore | 3.9 in |
| Stroke | 4.4 in |
| Air Intake | Turbocharged Aftercooled with external EGR |
| Horsepower Per SAE J1349 Net | 84 hp |
| Rated Speed | 2,500 rpm |
| Peak Torque | 282.5 lb-ft |
| Performance | |
| Tipping Load | 6,001 lb |
| Breakout Force, Bucket Cylinder | 8,610 lb |
| Breakout Force, Lift Cylinder | 6,340 lb |
| Rated Operating Load, 50% Tip | 2,998 lb |
| Power Train | |
| Travel Speed, Low Range | 7.7 mph |
| Travel Speed, High Range | 11.5 mph |
| Hydraulic System | |
| Optional High Flow | 37.6 gpm |
| Standard Pump Flow | 24.2 gpm |
| Additional specifications | |
| Operating Weight | 8,735 lb |
| Relief Valve Pressure | 3,046 psi |
L234
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Ground Clearance | 9.57 in |
| Wheelbase | 4.34 ft |
| Bottom Of Level Bucket, Fully Raised | 124.22 in |
| Bucket Hinge Pin | 130.99 in |
| Overall Width | 6.34 ft |
| Rollback, Bucket At Full Height | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees |
| Top Of ROPS | 80.4 in |
| Angle Of Departure | 26.5 degrees |
| Dump Angle | 54.7 degrees |
| Engine | |
| Engine Model | F5BFL413E*B002 |
| Displacement | 207.5 cu in |
| Fuel Injection | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 90 hp |
| Bore | 3.9 in |
| Stroke | 4.4 in |
| Air Intake | Turbocharged Aftercooled with external EGR |
| Horsepower Per SAE J1349 Net | 84 hp |
| Rated Speed | 2,500 rpm |
| Peak Torque | 282.5 lb-ft |
| Capacities | |
| Fuel Tank | 25.5 gal |
| Engine Oil With Filter | 2.3 gal |
| Chain Tanks | 5.9 gal |
| DEF Tank | 2.9 gal |
| Performance | |
| Tipping Load | 6,799 lb |
| Breakout Force, Bucket Cylinder | 9,330 lb |
| Breakout Force, Lift Cylinder | 6,924 lb |
| Rated Operating Load, 50% Tip | 3,400 lb |
| Power Train | |
| Travel Speed, Low Range | 7.7 mph |
| Travel Speed, High Range | 11.5 mph |
| Hydraulic System | |
| Optional High Flow | 37.6 gpm |
| Standard Pump Flow | 24.2 gpm |
| Weights | |
| Shipping | 8,576 lb |
| Additional specifications | |
| Operating Weight | 8,918 lb |
| Relief Valve Pressure | 3,450 psi |
Compare New Holland C232, L221, L228, L230, L234
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Ground Clearance | 9.57 in | 8 in | 8 in | 9.57 in | 9.57 in |
| Bottom Of Level Bucket, Fully Raised | 124.22 in | 116.15 in | 122.64 in | 122.64 in | 124.22 in |
| Bucket Hinge Pin | 131.11 in | 123 in | 129.41 in | 130.99 in | 130.99 in |
| Overall Width | 75.99 in | 5.76 ft | 5.81 ft | 6.34 ft | 6.34 ft |
| Rollback, Bucket At Full Height | 84.8 degrees | 99 degrees | 84.8 degrees | 84.8 degrees | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees | 31 degrees | 33.8 degrees | 32.8 degrees | 32.8 degrees |
| Top Of ROPS | 80.44 in | 78.67 in | 78.82 in | 80.4 in | 80.4 in |
| Angle Of Departure | 32 degrees | 25 degrees | 23.5 degrees | 26.5 degrees | 26.5 degrees |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Fuel Injection | HPCR Direct | HPCR Direct | HPCR Direct | HPCR Direct | HPCR Direct |
| Horsepower Per SAE J1349 Gross | 74 hp | 74 hp | 74 hp | 90 hp | 90 hp |
| Engine Model | F5H FL463A*F001 | F5H FL463 | F5H FL463A*F001 | F5BFL413E*B002 | F5BFL413E*B002 |
| Displacement | 207.5 cu in | 207.5 cu in | 207.5 cu in | 207.5 cu in | 207.5 cu in |
| Bore | 3.9 in | 3.9 in | 3.9 in | 3.9 in | 3.9 in |
| Stroke | 4.4 in | 4.4 in | 4.4 in | 4.4 in | 4.4 in |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Tipping Load | 6,398 lb | 3,999 lb | 5,600 lb | 6,001 lb | 6,799 lb |
| Operating Weight | 9,634 lb | 6,967 lb | 8,245 lb | 8,735 lb | 8,918 lb |
| Breakout Force, Bucket Cylinder | 7,509 lb | 7,261 lb | 8,610 lb | 8,610 lb | 9,330 lb |
| Breakout Force, Lift Cylinder | 4,833 lb | 4,564 lb | 6,137 lb | 6,340 lb | 6,924 lb |
| Rated Operating Load, 50% Tip | 3,199 lb | 1,995 lb | 2,800 lb | 2,998 lb | 3,400 lb |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Travel Speed, Low Range | 5.1 mph | 7.8 mph | 7 mph | 7.7 mph | 7.7 mph |
| Travel Speed, High Range | 7.6 mph | 11.4 mph | 10.5 mph | 11.5 mph | 11.5 mph |
| Specification | C232 | L221 | L228 | L230 | L234 |
|---|---|---|---|---|---|
| Optional High Flow | 37.6 gpm | 33.2 gpm | 37.6 gpm | 37.6 gpm | 37.6 gpm |
| Relief Valve Pressure | 3,046 psi | 3,046 psi | 3,046 psi | 3,046 psi | 3,450 psi |
More in New Holland: L120–LS125, C227–C238, L150/LS140/LS150 specs.