The Solis H26 global reference lists a 2100 rpm mid PTO and 540 rpm rear PTO. The S26 ShuttleXL reference instead identifies a 540/540E rear PTO arrangement and a synchromesh shuttle transmission. A seller’s abbreviated “Solis 26” leaves these important details unresolved.
H26 and S26 have different PTO arrangements
The mid-PTO figure is about 3.89 times the rear 540 rpm figure, but that is a speed ratio, not permission to connect one implement to either output. Mount, rotation, shaft specification, driveline and the approved installation still need to match.
Do not turn a lift headline into an attachment rating
The S26 product reference describes a 600 kg lifting capacity. Confirm its test position, hitch configuration and applicable conditions before comparing a carried implement. It is not a loader-fork capacity at an unspecified height or load center.
Match the complete tractor designation, market and serial range before ordering service parts or using power and weight figures. HST, shuttle, tire and attachment configurations should retain their own documentation. For an implement purchase, obtain the actual PTO-output basis and installed hitch/loader requirements rather than applying a fixed engine-to-PTO percentage.