Machine models
CASE 440CT Series 3 to TR320 specifications
Series 3 lift paths and the TR320 hydraulic package
The 440CT Series 3 uses radial lift, while the 445CT Series 3 uses vertical lift. The later TR320 returns to a radial arrangement with different controls and hydraulic specifications. Choose the lift path and attachment circuit before comparing these loaders by engine power or the operating-load row alone.
The Series 3 designation changes more than the engine rating
CASE's original Series 3 brochure identifies the 440CT and 445CT as different lift geometries. It also separates European ISO pilot controls from the H-pattern choice described for other markets. Photograph the control arrangement before assuming that a familiar model number means familiar joystick functions.
The same publication distinguishes standard auxiliary hydraulics, optional high flow, a case drain and an electrical attachment circuit. A hydraulic quick coupler secures an attachment; it does not establish that all of those services reach the tool. A cold planer or stump grinder needs its own connection requirements checked against the installed package.
Original CASE420CT/440CT/445CT Series3 brochure: lift geometry, market-specific pilot controls and attachment circuitsThe early TR320 sheet lists two pump contributions separately
The original 432T/M3 TR320 sheet gives standard equipment flow separately from the optional high-flow pump. The earlier comparison copied a small flow into the main pump field. The corrected entry identifies the documented standard flow; the separate pump entry remains a separate quantity.
Its loading specifications also distinguish tipping load from operating ratings calculated at different percentages. A tipping-load number is neither an angle nor an operating allowance. Use the rating convention shown for the task and machine configuration, without substituting the larger tipping number.
Original TR320 specification,pp1 and3: standard/optional pump flow, tipping load and percentage-based operating ratingsThe later EZ-EH controls do not identify every older TR320
CASE's August 2018 regional announcement describes upgraded EZ-EH controls with selectable response presets. It also lists mechanical control choices. A TR320 badge alone therefore cannot establish that the offered machine includes the upgraded electrohydraulic interface.
That announcement separates standard, high-flow and enhanced-high-flow packages. Ask which package is installed, then compare its documented pressure and flow with the attachment specification. A photograph of auxiliary couplers cannot resolve that package choice.
Likewise, do not transfer the later announcement's controls to the older Series 3 machines in this table.
CASE/CNH announcement,7August2018: upgraded control choices and three auxiliary packages| Model and field | Earlier entry | Documented interpretation |
|---|---|---|
| 440CT Series 3 Tipping Angle | 6000 degrees | 2,722 kg tipping load; Manufacturer440CT Series3 performance table; load, not angle |
| 445CT Series 3 Tipping Angle | 6600 degrees | 2,994 kg tipping load; Manufacturer445CT Series3 performance table; load, not angle |
| 450CT Tipping Angle | 7714 degrees | 3,499 kg tipping load; Original87364592NA operating manual,p186; imperial7174printing conflicts with metric3499kg,metric retained |
| TR320 Tipping Angle | 6400 degrees | 6,400 lb tipping load; ManufacturerTR320 performance table; load, not angle |
| TR320 Pump Flow | 12.2 gpm | 22.5 gpm standard equipment pump; 432T/M3 original sheet; optional high-flow contribution12.1gpm listed separately |
| Listing-entry count |
|---|
| 6 |
Short answer
CASE 440CT Series 3 to TR320: tracked compact loaders.
| Configuration | Documented field and quantity |
|---|---|
| 440CT Series 3 |
|
| 445CT |
|
| 445CT Series 3 |
|
| 450CT |
|
| 450CT Series 3 |
|
| TR320 |
|
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| CASE | 440CT Series 3 to TR320 | 6 | 440CT Series 3, 445CT, 445CT Series 3, 450CT, 450CT Series 3, and TR320 |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Width Over Tracks | 5.95 ft | 6.88 ft | 6.93 ft | 6.88 ft | 6.93 ft | 6.24 ft |
| Height To Top Of Cab | 6.73 ft | 6.67 ft | 6.93 ft | 6.67 ft | 6.96 ft | 6.57 ft |
| Ground Clearance | 9.3 in | 9 in | 11.15 in | 9.1 in | 11.3 in | 9.57 in |
| Clearance At Max Lift And Dump | 7.98 ft | 7.69 ft | 7.32 ft | 7.88 ft | 7.91 ft | 8.54 ft |
| Reach At Max Lift And Dump | 2.04 ft | 2.81 ft | 3.38 ft | 2.23 ft | 2.5 ft | 1.78 ft |
| Turning Radius From Center - Inc Bucket | 79.53 in | 84 in | 92.13 in | 86.3 in | 92.13 in | 85.5 in |
| Turning Radius From Center - Machine Rear | 57.09 in | 61.1 in | 55.12 in | 62.2 in | 59.85 in | 70.41 in |
| Length With Bucket | 10.8 ft | 11.29 ft | 11.29 ft | 11.73 ft | 11.72 ft | 11.82 ft |
| Length With Out Bucket | 8.54 ft | 8.59 ft | 8.7 ft | 9.06 ft | 9.16 ft | 9.85 ft |
| Specification | 440CT Series 3 | 445CT | 450CT | 450CT Series 3 |
|---|---|---|---|---|
| Length Of Track On Ground | 4.72 ft | 5.39 ft | 5.39 ft | 5.38 ft |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Ground Contact Area | 1,780 in2 | 2,293 in2 | 2,293 in2 | 2,293 in2 | 2,293 in2 | 2,038 in2 |
| Width Of Track | 15.75 in | 17.72 in | 17.72 in | 17.72 in | 17.72 in | 15.75 in |
| Ground Pressure | 5 psi | 4.3 psi | 4.3 psi | 4.8 psi | 4.8 psi | 4.8 psi |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 |
|---|---|---|---|---|---|
| Number Of Track Rollers Per Side | 3 | 4 | 4 | 4 | 4 |
| Specification | 445CT | 450CT | TR320 |
|---|---|---|---|
| Track Gauge | 5.45 ft | 5.45 ft | 4.93 ft |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Number Of Cylinders | 4 | 4 | 4 | 4 | 4 | 4 |
| Engine Model | 445T/M3 | Family III 445/M2 | 432T/M3 | Family III 445T/M2, Tier II certified | 445T/M3 | 432T/M3 |
| Gross Power | 90 hp | 80.5 hp | 82 hp | 88 hp | 90 hp | 90 hp |
| Net Power | 83 hp | 74 hp | 77 hp | 82 hp | 83 hp | 84 hp |
| Power Measured @ | 2,300 rpm | 2,300 rpm | 2,500 rpm | 2,300 rpm | 2,300 rpm | 2,500 rpm |
| Peak Torque | 288 lb-ft | 236 lb-ft | 229 lb-ft | 263 lb-ft | 288 lb-ft | 251 lb-ft |
| Torque Measured @ | 1,300 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,300 rpm | 1,400 rpm |
| Displacement | 274 cu in | 274 cu in | 195 cu in | 274 cu in | 274 cu in | 195 cu in |
| Aspiration | Turbocharged | Natural | Turbocharged | turbocharged | Turbocharged | Turbocharged |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Operating Weight | 8,925 lb | 9,815 lb | 10,200 lb | 10,915 lb | 10,925 lb | 9,600 lb |
| Fuel Capacity | 23.3 gal | 17.3 gal | 17.3 gal | 20.7 gal | 20.7 gal | 25.5 gal |
| Engine Oil Capacity | 3.2 gal | 3.2 gal | 2.3 gal | 3.2 gal | 3.2 gal | 2.6 gal |
| Hydraulic System Fluid Capacity | 7.1 gal | 11 gal | 11 gal | 17 gal | 17 gal | 11.8 gal |
| Operating Voltage | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V |
| Alternator Supplied Amperage | 95 amps | 95 amps | 95 amps | 95 amps | 95 amps | 95 amps |
| Max Speed - Low Range | 5.1 mph | 5.1 mph | 5.1 mph | 5.3 mph | 5.1 mph | 5.8 mph |
| Max Speed - High Range | 8 mph | 8 mph | 8 mph | 7.5 mph | 8 mph | 8.3 mph |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 |
|---|---|---|---|---|---|
| Cooling System Fluid Capacity | 3 gal | 4.5 gal | 3.1 gal | 4.5 gal | 3.1 gal |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Operating Load | 3,000 lb | 3,500 lb | 3,300 lb | 3,858 lb | 3,857 lb | 3,200 lb |
| Tipping Angle | 2,722 kg tipping load | Rejected source unit: 7000 degrees | 2,994 kg tipping load | 3,499 kg tipping load | Rejected source unit: 7714 degrees | 6,400 lb tipping load |
| Bucket Capacity | 0.7 yd3 | 0.8 yd3 | 0.8 yd3 | 0.8 yd3 | 0.8 yd3 | 0.7 yd3 |
| Specification | 445CT | 450CT |
|---|---|---|
| Breakout Force | 5,167 lb | 6,200 lb |
| Specification | TR320 |
|---|---|
| Bucket Width | 78 in |
| Specification | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Pump Type | Gear | gear pump | Gear | gear pump | Gear | Gear |
| Pump Flow | 22 gpm | 21 gpm | 23.9 gpm | 22.1 gpm | 22 gpm | 22.5 gpm standard equipment pump |
| Specification | 445CT | 450CT | TR320 |
|---|---|---|---|
| Relief Valve Pressure | 3,000 psi | 3,000 psi | 3,000 psi |
| Source guide | Differing-field count reported |
|---|---|
| 440CT Series 3 to TR320 | 38 |
| Figure | 440CT Series 3 | 445CT | 445CT Series 3 | 450CT | 450CT Series 3 | TR320 |
|---|---|---|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 9.3 | 7.5 | 7.5 | 7.5 | 7.6 | 8.8 |
| Fuel tank per engine horsepower | 0.28 gal | 0.23 gal | 0.22 gal | 0.25 gal | 0.25 gal | 0.30 gal |
CASE 440CT Series 3 to TR320: tracked compact loader
440CT Series 3 to TR320: owner reports
Sources: 3 forum discussions about the Case 440 skid steer loaders; heavyequipmentforums.com.Sources: 3 forum discussions about the Case 445 skid steer loaders (445CT, 445 Series 3); heavyequipmentforums.com.Sources: 3 forum discussions about the Case 450 skid steers (Series 3) and 450 dozers; heavyequipmentforums.com.| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | tracked compact loader | CASE and the 440CT Series 3, 445CT, 445CT Series 3, 450CT | 48 |
| Title topic | Titles |
|---|---|
| hydraulics | 7 |
| starting and cranking | 3 |
| electrical and sensors | 2 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| hydraulics | 7 | 15% |
| starting and cranking | 3 | 6% |
| electrical and sensors | 2 | 4% |
- How To Remove Wire From Harness Case Tr320 (Heavy Equipment Forums, 2026-04-20)
- Case Tr320 Code 9406 (Heavy Equipment Forums, 2025-04-29)
- Case 445ct Bucket Not Holding Lift (Heavy Equipment Forums, 2025-02-25)
- Case Tr320 Code 4752 (Heavy Equipment Forums, 2024-08-06)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | CASE tracked compact loader | 25 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| 445CT | 3 | 2006 to 2007 | $21,000 | $34,440 | $24,500 | None shown |
| 450CT | 3 | 2010 to 2022 | $25,500 | $29,048 | $28,300 | None shown |
| TR320 | 19 | 2012 to 2019 | $19,000 | $44,315 | $33,250 | 1,700 |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | CASE together with the tracked compact loader 440CT Series 3, 445CT, 445CT Series 3, 450CT | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Forum threads |
|
| Used-market listings |
|
| Federal agency data |
|
| Guide | As-listed machine class |
|---|---|
| CASE 440CT Series 3 to TR320 | tracked compact loader |
CASE 440CT Series 3 to TR320: Configuration records
440CT Series 3
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 5.95 ft |
| Height To Top Of Cab | 6.73 ft |
| Ground Clearance | 9.3 in |
| Clearance At Max Lift And Dump | 7.98 ft |
| Reach At Max Lift And Dump | 2.04 ft |
| Turning Radius From Center - Inc Bucket | 79.53 in |
| Turning Radius From Center - Machine Rear | 57.09 in |
| Length With Bucket | 10.8 ft |
| Length With Out Bucket | 8.54 ft |
| Undercarriage | |
| Length Of Track On Ground | 4.72 ft |
| Ground Contact Area | 1,780 in2 |
| Number Of Track Rollers Per Side | 3 |
| Width Of Track | 15.75 in |
| Ground Pressure | 5 psi |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 445T/M3 |
| Gross Power | 90 hp |
| Net Power | 83 hp |
| Power Measured @ | 2,300 rpm |
| Peak Torque | 288 lb-ft |
| Torque Measured @ | 1,300 rpm |
| Displacement | 274 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Operating Weight | 8,925 lb |
| Cooling System Fluid Capacity | 3 gal |
| Fuel Capacity | 23.3 gal |
| Engine Oil Capacity | 3.2 gal |
| Hydraulic System Fluid Capacity | 7.1 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.1 mph |
| Max Speed - High Range | 8 mph |
| Loader | |
| Operating Load | 3,000 lb |
| Hydraulic | |
| Pump Type | Gear |
| Pump Flow | 22 gpm |
| Additional specifications | |
| Bucket Capacity | 0.7 yd3 |
| Tipping Load — Manufacturer440CT Series3 performance table; load, not angle | 2,722 kg tipping load [source] |
445CT
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.88 ft |
| Height To Top Of Cab | 6.67 ft |
| Ground Clearance | 9 in |
| Clearance At Max Lift And Dump | 7.69 ft |
| Reach At Max Lift And Dump | 2.81 ft |
| Turning Radius From Center - Inc Bucket | 84 in |
| Turning Radius From Center - Machine Rear | 61.1 in |
| Length With Bucket | 11.29 ft |
| Length With Out Bucket | 8.59 ft |
| Undercarriage | |
| Length Of Track On Ground | 5.39 ft |
| Ground Contact Area | 2,293 in2 |
| Number Of Track Rollers Per Side | 4 |
| Width Of Track | 17.72 in |
| Ground Pressure | 4.3 psi |
| Track Gauge | 5.45 ft |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445/M2 |
| Gross Power | 80.5 hp |
| Net Power | 74 hp |
| Power Measured @ | 2,300 rpm |
| Peak Torque | 236 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 274 cu in |
| Aspiration | Natural |
| Operational | |
| Operating Weight | 9,815 lb |
| Cooling System Fluid Capacity | 4.5 gal |
| Fuel Capacity | 17.3 gal |
| Engine Oil Capacity | 3.2 gal |
| Hydraulic System Fluid Capacity | 11 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.1 mph |
| Max Speed - High Range | 8 mph |
| Loader | |
| Operating Load | 3,500 lb |
| Hydraulic | |
| Pump Type | gear pump |
| Pump Flow | 21 gpm |
| Relief Valve Pressure | 3,000 psi |
| Additional specifications | |
| Bucket Capacity | 0.8 yd3 |
| Breakout Force | 5,167 lb |
445CT Series 3
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.93 ft |
| Height To Top Of Cab | 6.93 ft |
| Ground Clearance | 11.15 in |
| Clearance At Max Lift And Dump | 7.32 ft |
| Reach At Max Lift And Dump | 3.38 ft |
| Turning Radius From Center - Inc Bucket | 92.13 in |
| Turning Radius From Center - Machine Rear | 55.12 in |
| Length With Bucket | 11.29 ft |
| Length With Out Bucket | 8.7 ft |
| Undercarriage | |
| Ground Contact Area | 2,293 in2 |
| Number Of Track Rollers Per Side | 4 |
| Width Of Track | 17.72 in |
| Ground Pressure | 4.3 psi |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 432T/M3 |
| Gross Power | 82 hp |
| Net Power | 77 hp |
| Power Measured @ | 2,500 rpm |
| Peak Torque | 229 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 195 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Operating Weight | 10,200 lb |
| Cooling System Fluid Capacity | 3.1 gal |
| Fuel Capacity | 17.3 gal |
| Engine Oil Capacity | 2.3 gal |
| Hydraulic System Fluid Capacity | 11 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.1 mph |
| Max Speed - High Range | 8 mph |
| Loader | |
| Operating Load | 3,300 lb |
| Hydraulic | |
| Pump Type | Gear |
| Pump Flow | 23.9 gpm |
| Additional specifications | |
| Bucket Capacity | 0.8 yd3 |
| Tipping Load — Manufacturer445CT Series3 performance table; load, not angle | 2,994 kg tipping load [source] |
450CT
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.88 ft |
| Height To Top Of Cab | 6.67 ft |
| Ground Clearance | 9.1 in |
| Clearance At Max Lift And Dump | 7.88 ft |
| Reach At Max Lift And Dump | 2.23 ft |
| Turning Radius From Center - Inc Bucket | 86.3 in |
| Turning Radius From Center - Machine Rear | 62.2 in |
| Length With Bucket | 11.73 ft |
| Length With Out Bucket | 9.06 ft |
| Undercarriage | |
| Length Of Track On Ground | 5.39 ft |
| Ground Contact Area | 2,293 in2 |
| Number Of Track Rollers Per Side | 4 |
| Width Of Track | 17.72 in |
| Ground Pressure | 4.8 psi |
| Track Gauge | 5.45 ft |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445T/M2, Tier II certified |
| Gross Power | 88 hp |
| Net Power | 82 hp |
| Power Measured @ | 2,300 rpm |
| Peak Torque | 263 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 274 cu in |
| Aspiration | turbocharged |
| Operational | |
| Operating Weight | 10,915 lb |
| Cooling System Fluid Capacity | 4.5 gal |
| Fuel Capacity | 20.7 gal |
| Engine Oil Capacity | 3.2 gal |
| Hydraulic System Fluid Capacity | 17 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.3 mph |
| Max Speed - High Range | 7.5 mph |
| Loader | |
| Operating Load | 3,858 lb |
| Hydraulic | |
| Pump Type | gear pump |
| Pump Flow | 22.1 gpm |
| Relief Valve Pressure | 3,000 psi |
| Additional specifications | |
| Bucket Capacity | 0.8 yd3 |
| Breakout Force | 6,200 lb |
| Tipping Load — Original87364592NA operating manual,p186; imperial7174printing conflicts with metric3499kg,metric retained | 3,499 kg tipping load [source] |
450CT Series 3
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.93 ft |
| Height To Top Of Cab | 6.96 ft |
| Ground Clearance | 11.3 in |
| Clearance At Max Lift And Dump | 7.91 ft |
| Reach At Max Lift And Dump | 2.5 ft |
| Turning Radius From Center - Inc Bucket | 92.13 in |
| Turning Radius From Center - Machine Rear | 59.85 in |
| Length With Bucket | 11.72 ft |
| Length With Out Bucket | 9.16 ft |
| Undercarriage | |
| Length Of Track On Ground | 5.38 ft |
| Ground Contact Area | 2,293 in2 |
| Number Of Track Rollers Per Side | 4 |
| Width Of Track | 17.72 in |
| Ground Pressure | 4.8 psi |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 445T/M3 |
| Gross Power | 90 hp |
| Net Power | 83 hp |
| Power Measured @ | 2,300 rpm |
| Peak Torque | 288 lb-ft |
| Torque Measured @ | 1,300 rpm |
| Displacement | 274 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Operating Weight | 10,925 lb |
| Cooling System Fluid Capacity | 3.1 gal |
| Fuel Capacity | 20.7 gal |
| Engine Oil Capacity | 3.2 gal |
| Hydraulic System Fluid Capacity | 17 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.1 mph |
| Max Speed - High Range | 8 mph |
| Loader | |
| Operating Load | 3,857 lb |
| Hydraulic | |
| Pump Type | Gear |
| Pump Flow | 22 gpm |
| Additional specifications | |
| Bucket Capacity | 0.8 yd3 |
TR320
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.24 ft |
| Height To Top Of Cab | 6.57 ft |
| Ground Clearance | 9.57 in |
| Clearance At Max Lift And Dump | 8.54 ft |
| Reach At Max Lift And Dump | 1.78 ft |
| Turning Radius From Center - Inc Bucket | 85.5 in |
| Turning Radius From Center - Machine Rear | 70.41 in |
| Length With Bucket | 11.82 ft |
| Length With Out Bucket | 9.85 ft |
| Undercarriage | |
| Ground Contact Area | 2,038 in2 |
| Width Of Track | 15.75 in |
| Ground Pressure | 4.8 psi |
| Track Gauge | 4.93 ft |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 432T/M3 |
| Gross Power | 90 hp |
| Net Power | 84 hp |
| Power Measured @ | 2,500 rpm |
| Peak Torque | 251 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 195 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Operating Weight | 9,600 lb |
| Fuel Capacity | 25.5 gal |
| Engine Oil Capacity | 2.6 gal |
| Hydraulic System Fluid Capacity | 11.8 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.8 mph |
| Max Speed - High Range | 8.3 mph |
| Loader | |
| Operating Load | 3,200 lb |
| Hydraulic | |
| Pump Type | Gear |
| Pump Flow — 432T/M3 original sheet; optional high-flow contribution12.1gpm listed separately | 22.5 gpm standard equipment pump [source] |
| Relief Valve Pressure | 3,000 psi |
| Additional specifications | |
| Bucket Capacity | 0.7 yd3 |
| Bucket Width | 78 in |
| Tipping Load — ManufacturerTR320 performance table; load, not angle | 6,400 lb tipping load [source] |
More in CASE: TR270–TV370, TV380: controls/hydraulic packages/load conditions, 420CT/420CT Series 3/440CT specs.