Machine models
Cat 330B, 330B LN and 330C LN: chassis and control differences
The LN chassis and the engine generation are separate choices
Cat's European 330C L/LN brochure identifies LN as the long, narrow undercarriage intended to ease transport. Its chassis schedule gives track gauge separately from overall width with shoes fitted. The width of the upper body is another dimension.
A transporter needs the complete machine width, not the distance between track centres.
The C-series brochure specifies the C-9 ATAAC engine with hydraulically actuated, electronically controlled injection. Its coolant radiator and hydraulic-oil radiator sit beside each other, with different fan drives. A cooling complaint therefore needs the affected circuit identified.
The narrow chassis designation does not describe that engine or cooling arrangement.
Reach, mass-excavation and variable-angle fronts also have different sticks and bucket families. An LN advertisement alone cannot establish the fitted front's lifting or digging envelope.
Source: Cat 330C L/LN European Specalog, engine, chassis and front schedules.B-series hydraulic results need the matching test conditions
The original SENR1663-01 testing sheet covers 330B L/LN machines powered by the 3306 engine. It explicitly requires the actual engine arrangement and serial number to be verified because the installed arrangement may have changed. A rebuilt engine cannot be identified reliably from an old advertisement.
The sheet separates pilot, implement, swing and travel pressure tests. It also separates powered cycle times from empty-bucket cylinder drift. A statement that “the hydraulics tested well” leaves those measurements unspecified.
Ask for the function tested, the relevant procedure and its recorded result.
Travel checks cover each side and direction independently. Good boom performance does not establish that both travel circuits meet the same test. Leave pressure testing to someone equipped for the specified procedure.
Source: Cat SENR1663-01, specification and operational-check extract.A B-series electrical fault does not prove a worn pump
Cat's RENR1998-06 controller tables identify pump-delivery pressure input, governor feedback, pressure switches and proportional-reducing-valve commands separately. Those signals describe different parts of engine-and-pump control. A slow response can require checking the command and feedback paths before condemning a rotating group.
The tables distinguish a clogged hydraulic-filter indication from the air-filter switch and fluid-level switches. The optional fine-swing switch also changes the listed swing-brake behaviour. Record the installed option and the precise warning instead of treating every monitor message as the same hydraulic failure.
Source: Cat RENR1998-06, controller input/output extract for the 330B configuration.| Listing-entry count |
|---|
| 3 |
Cat 330B, 330B LN and 330C LN: chassis and control differences: full-size excavators.
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| Cat | 330B, 330B LN, and 330C LN | 3 | 330B, 330B LN, and 330C LN |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Shipping Length Of Unit | 36.36 ft | 36.59 ft | 39 ft |
| Shipping Height Of Unit | 11.85 ft | 11.68 ft | 10.55 ft |
| Max Cutting Height | 35.34 ft | 35.21 ft | 40.1 ft |
| Max Loading Height | 24.94 ft | 25.04 ft | 28.22 ft |
| Max Reach Along Ground | 38.13 ft | 38.13 ft | 34.81 ft |
| Max Vertical Wall Digging Depth | 23.73 ft | 19.76 ft | 13.39 ft |
| Max Digging Depth | 26.51 ft | 26.45 ft | 16.31 ft |
| Boom/Stick Option (Hex) 1 | Boom 21\'4\" (6500mm) / Stick 12\'10\" (3900mm) |
|
|
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Ground Clearance | 1.68 ft | 1.68 ft | 1.68 ft |
| Height To Top Of Cab | 10.34 ft | 10.67 ft | 10.77 ft |
| Width To Outside Of Tracks | 10.47 ft | 9.81 ft | 9.81 ft |
| Length Of Track On Ground | 11.85 ft | 13.26 ft | 13.26 ft |
| Tail Swing Radius | 11.49 ft | 11.49 ft | 11.49 ft |
| Removal Counterweight Clearance | 4.14 ft | 4.14 ft | 4.76 ft |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Track Gauge | 8.5 ft | 7.85 ft | 7.85 ft |
| Shoe Size | 23.63 in | 23.63 in | 23.63 in |
| Drawbar Pull | 60,250 lb | 60,250 lb | 66,094 lb |
| Max Travel Speed | 2.86 mph | 2.86 mph | 3.11 mph |
| Specification | 330C LN |
|---|---|
| Ground Pressure | 8.53 psi |
| Specification | 330B |
|---|---|
| Number Of Cylinders | 6 |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Engine Model | 3306TA | 3306TA | C-9 ATAAC |
| Gross Power | 236 hp | 222 hp | 264 hp |
| Displacement | 640.8 cu in | 640.8 cu in | 537.1 cu in |
| Specification | 330B | 330C LN |
|---|---|---|
| Net Power | 222 hp | 243 hp |
| Power Measured @ | 1,800 rpm | 1,800 rpm |
| Aspiration | Turbocharged and Aftercooled | Turbocharged |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Operating Weight | 71,474 lb | 74,362 lb | 76,434 lb |
| Fuel Capacity | 148 gal | 148 gal | 163.3 gal |
| Hydraulic System Relief Valve Pressure | 4,980 psi | 4,980 psi | 4,975 psi |
| Hydraulic Pump Flow Capacity | 126.9 gpm | 126.9 gpm | 148 gpm |
| Specification | 330B | 330C LN |
|---|---|---|
| Cooling System Fluid Capacity | 11.9 gal | 9.3 gal |
| Hydraulic System Fluid Capacity | 105.7 gal | 108.4 gal |
| Engine Oil Capacity | 8 gal | 9.4 gal |
| Operating Voltage | 24 V | 24 V |
| Swing Drive Fluid Capacity | 4 gal | 5.1 gal |
| Alternator Supplied Amperage | 50 amps | 65 amps |
| Specification | 330B | 330C LN |
|---|---|---|
| Swing Torque | 78,200 lb-ft | 79,657 lb-ft |
| Specification | 330C LN |
|---|---|
| Swing Speed | 10 rpm |
| Specification | 330C LN |
|---|---|
| Reference Bucket Capacity | 2 yd3 |
| Minimum Bucket Capacity | 1.3 yd3 |
| Maximum Bucket Capacity | 2.5 yd3 |
| Source guide | Differing-field count reported |
|---|---|
| 330B, 330B LN, and 330C LN | 38 |
| Figure | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 3.1 | 3.0 | 3.2 |
| Fuel tank per engine horsepower | 0.67 gal | 0.67 gal | 0.67 gal |
| Hydraulic power from the listed pump flow and relief pressure | 368.7 hp | 368.7 hp | 429.6 hp |
330B, 330B LN, and 330C LN: owner reports
Related account: “Electrical, monitor and start-up faults”; “Hydraulic behaviour”: 326 to 335.
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums and The Farming Forum | full-size excavator | Cat and the 330B, 330C line that the 330B, 330B LN, 330C LN belongs to (no title names the exact model) | 26 |
| Title topic | Titles |
|---|---|
| hydraulics | 2 |
| brakes and steering | 2 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| hydraulics | 2 | 8% |
| brakes and steering | 2 | 8% |
- CAT 330b Vs 330c (Heavy Equipment Forums, 2025-04-06)
- 330c Caterpillar Radiator (Heavy Equipment Forums, 2022-08-15)
- CAT 330c Right Track No Power (Heavy Equipment Forums, 2022-01-19)
- CAT 220b 330b Errors (The Farming Forum, 2021-10-22)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | Cat full-size excavator | 36 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| 330B | 6 | 1998 to 2001 | $18,000 | $27,000 | $21,500 | None shown |
| 330B LN | 6 | 1998 to 2001 | $18,000 | $27,000 | $21,500 | None shown |
| 330C LN | 24 | 2001 to 2007 | $22,000 | $240,000 | $49,000 | 1,500 |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Cat together with the full-size excavator 330B, 330B LN, 330C LN | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Forum threads |
|
| Used-market listings |
|
| Federal agency data |
|
Cat 330B, 330B LN and 330C LN: chassis and control differences: Configuration records
330B
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Shipping Length Of Unit | 36.36 ft |
| Shipping Height Of Unit | 11.85 ft |
| Max Cutting Height | 35.34 ft |
| Max Loading Height | 24.94 ft |
| Max Reach Along Ground | 38.13 ft |
| Max Vertical Wall Digging Depth | 23.73 ft |
| Max Digging Depth | 26.51 ft |
| Boom/Stick Option (Hex) 1 | Boom 21'4" (6500mm) / Stick 12'10" (3900mm) |
| Dimensions and weight | |
| Ground Clearance | 1.68 ft |
| Height To Top Of Cab | 10.34 ft |
| Width To Outside Of Tracks | 10.47 ft |
| Length Of Track On Ground | 11.85 ft |
| Tail Swing Radius | 11.49 ft |
| Removal Counterweight Clearance | 4.14 ft |
| Undercarriage | |
| Shoe Size | 23.63 in |
| Drawbar Pull | 60,250 lb |
| Max Travel Speed | 2.86 mph |
| Engine | |
| Number Of Cylinders | 6 |
| Engine Model | 3306TA |
| Net Power | 222 hp |
| Gross Power | 236 hp |
| Power Measured @ | 1,800 rpm |
| Displacement | 640.8 cu in |
| Aspiration | Turbocharged and Aftercooled |
| Operational | |
| Fuel Capacity | 148 gal |
| Cooling System Fluid Capacity | 11.9 gal |
| Hydraulic System Fluid Capacity | 105.7 gal |
| Engine Oil Capacity | 8 gal |
| Operating Voltage | 24 V |
| Swing Drive Fluid Capacity | 4 gal |
| Alternator Supplied Amperage | 50 amps |
| Hydraulic System Relief Valve Pressure | 4,980 psi |
| Hydraulic Pump Flow Capacity | 126.9 gpm |
| Swing Mechanism | |
| Swing Torque | 78,200 lb-ft |
| Additional specifications | |
| Track Gauge | 8.5 ft |
| Operating Weight | 71,474 lb |
330B LN
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Shipping Length Of Unit | 36.59 ft |
| Shipping Height Of Unit | 11.68 ft |
| Max Cutting Height | 35.21 ft |
| Max Loading Height | 25.04 ft |
| Max Reach Along Ground | 38.13 ft |
| Max Vertical Wall Digging Depth | 19.76 ft |
| Max Digging Depth | 26.45 ft |
| Boom/Stick Option (Hex) 1 |
|
| Dimensions and weight | |
| Ground Clearance | 1.68 ft |
| Height To Top Of Cab | 10.67 ft |
| Width To Outside Of Tracks | 9.81 ft |
| Length Of Track On Ground | 13.26 ft |
| Tail Swing Radius | 11.49 ft |
| Removal Counterweight Clearance | 4.14 ft |
| Undercarriage | |
| Shoe Size | 23.63 in |
| Drawbar Pull | 60,250 lb |
| Max Travel Speed | 2.86 mph |
| Engine | |
| Engine Model | 3306TA |
| Gross Power | 222 hp |
| Displacement | 640.8 cu in |
| Operational | |
| Fuel Capacity | 148 gal |
| Hydraulic System Relief Valve Pressure | 4,980 psi |
| Hydraulic Pump Flow Capacity | 126.9 gpm |
| Additional specifications | |
| Track Gauge | 7.85 ft |
| Operating Weight | 74,362 lb |
330C LN
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Shipping Length Of Unit | 39 ft |
| Shipping Height Of Unit | 10.55 ft |
| Max Cutting Height | 40.1 ft |
| Max Loading Height | 28.22 ft |
| Max Reach Along Ground | 34.81 ft |
| Max Vertical Wall Digging Depth | 13.39 ft |
| Max Digging Depth | 16.31 ft |
| Boom/Stick Option (Hex) 1 |
|
| Dimensions and weight | |
| Ground Clearance | 1.68 ft |
| Height To Top Of Cab | 10.77 ft |
| Width To Outside Of Tracks | 9.81 ft |
| Length Of Track On Ground | 13.26 ft |
| Tail Swing Radius | 11.49 ft |
| Removal Counterweight Clearance | 4.76 ft |
| Undercarriage | |
| Shoe Size | 23.63 in |
| Drawbar Pull | 66,094 lb |
| Max Travel Speed | 3.11 mph |
| Ground Pressure | 8.53 psi |
| Engine | |
| Engine Model | C-9 ATAAC |
| Net Power | 243 hp |
| Gross Power | 264 hp |
| Power Measured @ | 1,800 rpm |
| Displacement | 537.1 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Fuel Capacity | 163.3 gal |
| Cooling System Fluid Capacity | 9.3 gal |
| Hydraulic System Fluid Capacity | 108.4 gal |
| Engine Oil Capacity | 9.4 gal |
| Operating Voltage | 24 V |
| Swing Drive Fluid Capacity | 5.1 gal |
| Alternator Supplied Amperage | 65 amps |
| Hydraulic System Relief Valve Pressure | 4,975 psi |
| Hydraulic Pump Flow Capacity | 148 gpm |
| Swing Mechanism | |
| Swing Torque | 79,657 lb-ft |
| Swing Speed | 10 rpm |
| Buckets | |
| Reference Bucket Capacity | 2 yd3 |
| Minimum Bucket Capacity | 1.3 yd3 |
| Additional specifications | |
| Track Gauge | 7.85 ft |
| Operating Weight | 76,434 lb |
| Maximum Bucket Capacity | 2.5 yd3 |
Compare Cat 330B, 330B LN, 330C LN
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Shipping Length Of Unit | 36.36 ft | 36.59 ft | 39 ft |
| Shipping Height Of Unit | 11.85 ft | 11.68 ft | 10.55 ft |
| Max Cutting Height | 35.34 ft | 35.21 ft | 40.1 ft |
| Max Loading Height | 24.94 ft | 25.04 ft | 28.22 ft |
| Max Reach Along Ground | 38.13 ft | 38.13 ft | 34.81 ft |
| Max Vertical Wall Digging Depth | 23.73 ft | 19.76 ft | 13.39 ft |
| Max Digging Depth | 26.51 ft | 26.45 ft | 16.31 ft |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Ground Clearance | 1.68 ft | 1.68 ft | 1.68 ft |
| Height To Top Of Cab | 10.34 ft | 10.67 ft | 10.77 ft |
| Width To Outside Of Tracks | 10.47 ft | 9.81 ft | 9.81 ft |
| Length Of Track On Ground | 11.85 ft | 13.26 ft | 13.26 ft |
| Tail Swing Radius | 11.49 ft | 11.49 ft | 11.49 ft |
| Removal Counterweight Clearance | 4.14 ft | 4.14 ft | 4.76 ft |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Track Gauge | 8.5 ft | 7.85 ft | 7.85 ft |
| Shoe Size | 23.63 in | 23.63 in | 23.63 in |
| Drawbar Pull | 60,250 lb | 60,250 lb | 66,094 lb |
| Max Travel Speed | 2.86 mph | 2.86 mph | 3.11 mph |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Engine Model | 3306TA | 3306TA | C-9 ATAAC |
| Gross Power | 236 hp | 222 hp | 264 hp |
| Displacement | 640.8 cu in | 640.8 cu in | 537.1 cu in |
| Specification | 330B | 330B LN | 330C LN |
|---|---|---|---|
| Operating Weight | 71,474 lb | 74,362 lb | 76,434 lb |
| Fuel Capacity | 148 gal | 148 gal | 163.3 gal |
| Hydraulic System Relief Valve Pressure | 4,980 psi | 4,980 psi | 4,975 psi |
| Hydraulic Pump Flow Capacity | 126.9 gpm | 126.9 gpm | 148 gpm |
More in Cat: 330C ES: reinforced chassis/hydraulic arrangements, 328D LCR/330D L, 330C L Long Reach fronts/working limits.