Machine models

Cat CB34B, CS5 and CW14: paving, soil and tire equipment

CB34B paving work, CS5 soil work and CW14 tire compaction

The CB34B is a small tandem roller, not the same kind of compactor as the CS5 or CW14 records in this comparison. Its QEHQ1700 sheet describes drum offset for curb work, two vibration-frequency choices and optional ballast. The XW in that publication has a wider drum; CC34B is the separate combination machine with pneumatic tires.

Those suffixes change the working arrangement, not merely the name.

On the CB34B, water passes through three filtration stages before reaching the mat. The spring-loaded scrapers maintain drum contact and spread water, while variable spray settings regulate use. Inspect filtration and scraper contact together when troubleshooting pickup: a full tank alone does not demonstrate even delivery.

The antifreeze system is optional, and the common drain port simplifies emptying; neither establishes that a stored machine was protected against freezing.

Transport height depends on the installed protective structure. Cat offers fixed and folding ROPS/canopy choices, and its reduced-height figure assumes the folding arrangement has been lowered. Verify the hinges and locking hardware before using that transport dimension.

Optional dual propel levers and a sliding seat also require inspection; the basic control panel does not establish their presence.

Source: Cat QEHQ1700, CB34B/XW and CC34B equipment and dimension schedules.

The CS5 and CW14 need different inspection questions

The current CS5 has a smooth drum and is aimed at granular material in residential and utility work. Cat's equipment description supplies separate propel flow to the drum motor and rear axle, with a limited-slip differential at the wheels. Its operator platform tilts forward for pump access, and the hydraulic cooler tilts back for radiator access.

Those are useful places to inspect leaks and retained debris.

The CS5 product page contains conflicting extra width and cab-weight rows alongside its narrow drum and canopy schedule. Those inconsistent entries are identified in the table; they are not a basis for transport planning. Match a serial-specific drawing and equipped weight before arranging the trailer.

The CW14 instead rolls on nine tires, with an eleven-wheel option. Its original sell sheet distinguishes standard gravity-fed water spray from optional pressurization and a fixed seat from an optional pivoting station. Ballast may be water, wet sand or a steel-and-wet-sand combination.

The baffled chamber controls movement of the contents; maximum ballasted weight is not the empty machine's weight. Check which wheel and ballast arrangement is actually fitted before comparing load per tire.

Sources: Cat CS5 04A equipment and specifications; Cat CW14 QEXQ1622-02, wheel, ballast and spray choices.

Earlier entries and manufacturer edition corrections
Model and field	Earlier entry	Correction or edition boundary	Source
CB34B Ground Clearance	11 ft	284 mm (11 in), QEHQ1700 drawing; the former foot unit was incorrect	Original document
CB34B Wheelbase	81 ft	2,050 mm (81 in), QEHQ1700; not 81 feet	Original document
CB34B Curb Clearance	20 in	625 mm (25 in), QEHQ1700	Original document
CB34B Static Linear Load	80 lb	14.2 kg/cm (80 lb/in), standard unballasted CB34B, QEHQ1700	Original document
CB34B Nominal Amplitude - High	0.1 in	0.50 mm (0.020 in), QEHQ1700	Original document
CB34B Frequency	55/48 Hz (3,300/2800 vpm)	55/48 Hz (3,300/2,880 vpm), QEHQ1700	Original document
CB34B Centrifugal Force Per Drum - Maximum	7,104 lb	33.9 kN (7,621 lbf), standard CB34B, QEHQ1700	Original document
CB34B Centrifugal Force Per Drum - Minimum	5,418 lb	25.9 kN (5,823 lbf), standard CB34B, QEHQ1700	Original document
CS5 Compaction Width	84 in	1,270 mm (50 in) is the published drum width; the web Compaction Width row says 84 in (2,134 mm), inconsistent with its 1,393 mm overall width	Original document
CS5 Operating Weight - With Cab	25,353 lb	25,353 lb (11,500 kg) is an inconsistent extra web row beside the 4,570 kg canopy CS5; a corresponding cab configuration is not established, so this is not a transport weight	Original document
CW14 Overall Length	1.18 ft	4,290 mm in the manufacturer metric row; its paired 14.1 in text is inconsistent and is not used as a length conversion	Original document
CW14 Ground Clearance	10.5 ft	267 mm (10.5 in), manufacturer specification	Original document
CW14 Maximum Machine Height	9.81 in	3,000 mm in the manufacturer metric height row; its paired 9.8 in is malformed	Original document
CW14 Height - ROPS	0.82 ft	3,000 mm in the manufacturer ROPS row; its paired 9.8 in is malformed	Original document
CW14 Turning Radius - Inside (1)	15.1 in	4.68 m is the separate inside-radius metric row; the 15.1 in / 4.68 mm pair in this row is malformed	Original document
CW14 Turning Radius - Outside	21.1 in	21.1 in paired with 6.45 mm is an inconsistent manufacturer web row; a usable outside radius is not established by those units	Original document
CW14 Average Weight Per Wheel - Maximum Ballast	1,212 lb	The original 1,212 lb entry does not match the maximum-ballast schedule. QEXQ1622-02 gives 1.44 metric tonnes per wheel with wet sand on the standard nine-wheel machine; heavy-weight configuration separately 1.92 tonnes.	Original document

Entries in this reference
Listing-entry count
16

Short answer

Cat CB34B, CS5 and CW14: paving, soil and tire equipment: soil or asphalt compactors.

Selected configuration figures
Configuration	Documented field and quantity
CB34B	Gross Power 48.8 hp Operating Weight 8,157 lb
CP5	Gross Power 75.8 hp Operating Weight - With ROPS/FOPS Canopy 10,307 lb
CS5	Gross Power 75.8 hp Operating Weight - With ROPS/FOPS Canopy 10,075 lb
CB544	Gross Power 80.5 hp Operating Weight 23,590 lb
CB434D	Gross Power 83 hp Operating Weight 16,270 lb
PF300B	Gross Power 105 hp Operating Weight - Standard 30,860 lb
PS300B	Gross Power 105 hp Operating Weight - Standard 30,860 lb
PS300C	Gross Power 100 hp Operating Weight - Max Ballast 2,500 lb
CB334E	Gross Power 45.8 hp Operating Weight 8,686 lb
CB334EXW	Gross Power 45.8 hp Operating Weight 9,260 lb
CB335E	Gross Power 45.8 hp Operating Weight 8,091 lb
CP7	Gross Power 99.8 hp Operating Weight - With Cab 16,810 lb
CS7	Gross Power 99.8 hp Operating Weight - With Cab 16,116 lb
PS150C	Gross Power 100 hp Operating Weight - Standard 10,770 lb
PS200B	Gross Power 105 hp Operating Weight - Standard 10,925 lb
CW14	Gross Power 100.5 hp Operating Weight - No Ballast 10,770 lb

CB34B and 15 related models specification matrix — Listing labels reported by the source
Publisher name	Source guide	Listing-entry count	Labels named by the source
Cat	CB34B and 15 related models	16	CB334E, CB334EXW, CB335E, CB34B, CP5, CS5, and 10 more

Dimensions and weight
Specification	CB334E	CB334EXW	CB335E	CB34B	CP5	CS5	CB544	CB434D	PF300B	PS300B	PS300C	CP7	CS7	PS150C	PS200B	CW14
Overall Length	10.24 in	10.24 in	10.24 in	9.42 ft	164 in	164 in	13.78 in	165 in	17.39 in	17.39 in	17.39 in	16.7 ft	16.7 ft	169 in	14.11 in	4,290 mm in the manufacturer metric row; its paired 14.1 in text is inconsistent and is not used as a length conversion

Specification	CB334E	CB335E	CB34B	CP5	CS5	CB434D	PF300B	PS300B	PS300C	CP7	CS7	PS150C	PS200B
Overall Width	4.57 ft	4.57 ft	4.59 ft	55 in	55 in	5.5 ft	6.57 ft	6.57 ft	6.57 ft	70.9 in	70.9 in	5.67 ft	5.75 ft

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D
Height To Top Of Cab	8.39 ft	8.39 ft	8.39 ft	9.85 ft	10.03 ft

Specification	CB334E	CB334EXW	CB335E	CB34B	CB544	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B
Wheelbase	7.62 in	7.62 in	7.62 in	2,050 mm (81 in), QEHQ1700; not 81 feet	9.85 in	10.18 in	13.23 ft	13.23 ft	13.23 ft	10.96 ft	11 ft

Specification	CB334E	CB334EXW	CB335E	CB34B	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B	CW14
Ground Clearance	11.19 in	11.19 in	11.19 in	284 mm (11 in), QEHQ1700 drawing; the former foot unit was incorrect	10.04 in	0.83 ft	0.83 ft	_ -	0.88 ft	0.88 ft	267 mm (10.5 in), manufacturer specification

Specification	CB34B	CB434D	PS150C	CW14
Maximum Machine Height	109 in	119 in	118 in	3,000 mm in the manufacturer metric height row; its paired 9.8 in is malformed

Specification	CB34B	CS5	CB434D	CP7	CS7
Drum Diameter	32 in	40 in	42 in	48.1 in	48.1 in

Specification	CB34B	CP5	CS5	CB434D	CP7	CS7
Wheel Base	6.75 ft	88 in	88 in	10.17 ft	8.5 ft	8.5 ft

Specification	CP5	CS5	CP7	CS7
Compaction Width	50 in	1,270 mm (50 in) is the published drum width; the web Compaction Width row says 84 in (2,134 mm), inconsistent with its 1,393 mm overall width	66 in	66 in
Maximum Height	99 in	99 in	9.3 ft	9.4 ft

Specification	CP5	CP7	CS7
Overall Length - With Blade Option	179 in	18.4 ft	18.4 ft
Overall Width - With Blade Option	62 in	83.5 in	83.5 in
Optional Blade Height	22 in	22.9 in	22.9 in

Specification	CP5
Drum Diameter - Over Pads	40 in

Specification	CS5	CB434D
Drum Width	50 in	59 in

Specification	CB434D	PS150C	CW14
Height - Steering Wheel	89 in	91 in	91 in

Specification	PF300B	PS300B	PS300C	PS150C	PS200B
Height To Top Of ROPS	9.85 ft	9.85 ft	9.85 ft	9.85 ft	9.85 ft

Specification	CW14
Height - ROPS	3,000 mm in the manufacturer ROPS row; its paired 9.8 in is malformed

Engine
Specification	CB334E	CB334EXW	CB335E	CB34B	CP5	CS5	CB544	CB434D	PF300B	PS300B	PS300C	CP7	CS7	PS150C	PS200B	CW14
Engine Model	3024C	3024C	3024C	C2.2	Cat® C2.8	Cat C2.8	3054 DINA	3054C	3054 DIT	3054 DIT	3054C Turbocharged Disel Engine	Cat C3.6	Cat C3.6	3054C	3054T	C3.4B
Gross Power	45.8 hp	45.8 hp	45.8 hp	48.8 hp	75.8 hp	75.8 hp	80.5 hp	83 hp	105 hp	105 hp	100 hp	99.8 hp	99.8 hp	100 hp	105 hp	100.5 hp

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D	PS300C	PS150C
Net Power	44.3 hp	44.3 hp	44.3 hp	73.8 hp	79.2 hp	85 hp	96.6 hp

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B
Displacement	135.3 cu in	135.3 cu in	135.3 cu in	244.1 cu in	268.6 cu in	243 cu in	243 cu in	268.6 cu in	268.6 cu in	243 cu in

Specification	CP5	CS5	CP7	CS7
Engine Power - ISO 14396	74.3 hp	74.3 hp	99.8 hp	99.8 hp
Net Power - ISO 9249	72 hp	72 hp	94.1 hp	94.1 hp
Net Power - SAE J1349:2011	72 hp	72 hp	94.1 hp	94.1 hp
Emissions	US EPA Tier 4 Final	US EPA Tier 4 Final	Meets US EPA Tier 4 Final and EU Stage V emission standards	Meets US EPA Tier 4 Final and EU Stage V emission standards

Specification	CP5	CP7	CS7
Build Number	04A	03B	03B

Specification	CP5	CS5	CP7	CS7	CW14
Stroke	4.3 in	4.3 in	4.7 in	4.7 in	4.4 in
Bore	3.5 in	3.5 in	3.9 in	3.9 in	3.9 in

Specification	PF300B	PS300B	PS150C	PS200B
Number Of Cylinders	4	4	4	4
Power Measured @	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm

Specification	PS150C	PS200B
Aspiration	turbocharged	Turbocharged

Operational
Specification	CB334E	CB334EXW	CB335E	CB34B	CB544	CB434D
Operating Weight	8,686 lb	9,260 lb	8,091 lb	8,157 lb	23,590 lb	16,689 lb

Specification	CB334E	CB334EXW	CB335E	CB34B	CB544	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B	CW14
Fuel Capacity	15.1 gal	15.1 gal	15.1 gal	24 gal	55 gal	34.9 gal	50 gal	50 gal	56.8 gal	45.8 gal	45.8 gal	45.6 gal

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B
Engine Oil Capacity	2.9 gal	2.9 gal	2.9 gal	2.4 gal	2.4 gal	1.9 gal	1.9 gal	2.4 gal	2 gal	2 gal
Max Speed	7.8 mph	7.8 mph	7.8 mph	5.6 mph	7.3 mph	12.4 mph	12.4 mph	11.9 mph	16 mph	12 mph

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D	PF300B	PS300B	PS300C	PS150C
Hydraulic System Fluid Capacity	12.7 gal	12.7 gal	12.7 gal	14.6 gal	13.3 gal	2.7 gal	2.7 gal	2.7 gal	14.6 gal

Specification	CB334E	CB334EXW	CB335E	CB434D	PS150C
Operating Voltage	12 V	12 V	12 V	12 V	24 V
Alternator Supplied Amperage	65 amps	65 amps	65 amps	80 amps	55 amps

Specification	CB335E
Tires *If Applicable	7.5x16

Specification	CB544	CB434D	PF300B	PS300B	PS300C	PS150C
Cooling System Fluid Capacity	5.7 gal	4.8 gal	7.2 gal	7.2 gal	7.4 gal	4.3 gal

Specification	PF300B	PS300B	PS300C	PS150C	PS200B
Water Spray Tank Fluid Capacity	118.1 gal	118.1 gal	121.6 gal	104.1 gal	104.1 gal

Drum
Specification	CB334E	CB334EXW	CB335E	CB34B	CB544	CB434D
Drum Width	51.2 in	55.2 in	51.2 in	51 in	67 in	59.1 in

Specification	CB334E	CB334EXW	CB335E	CB544	CB434D
Drum Diameter	31.5 in	31.5 in	31.5 in	47.3 in	43.4 in
Static Linear Load	216.2 lb/in	213.4 lb/in	213.4 lb/in	462.3 lb/in	358.5 lb/in
Vibration Frequency 1	69 Hz	53 Hz	61 Hz	42 Hz	53 Hz
Nominal Amplitude - Med	0.1 in	0.1 in	0.1 in	0.1 in	0.1 in
Centrifugal Force - Med	7,441 lb	6,632 lb	7,441 lb	19,514 lb	12,140 lb

Specification	CB334EXW	CB544	CB434D
Vibration Frequency 2	48 Hz	50 Hz	70 Hz

Specification	CB434D
Nominal Amplitude - High	0.1 in
Nominal Amplitude - Med High	0.1 in
Nominal Amplitude - Med Low	0.1 in
Nominal Amplitude - Low	0.1 in
Centrifugal Force - High	17,535 lb
Centrifugal Force - Med High	14,837 lb
Centrifugal Force - Med Low	9,442 lb
Centrifugal Force - Low	6,520 lb

Operating Specifications
Specification	CB34B	CP5	CS5	CB434D	CP7	CS7	PS150C	CW14
Ground Clearance	0.92 ft	13.7 in	13.7 in	0.84 ft	15.2 in	15.4 in	0.88 ft	0.88 ft
Travel Speed - Maximum	8 mph	5.5 mph	5.5 mph	7 mph	7.1 mph	7.1 mph	15.9 mph	11 mph

Specification	CB34B	CB434D
Standard Compaction Width	51 in	59 in
Static Linear Load	14.2 kg/cm (80 lb/in), standard unballasted CB34B, QEHQ1700	138 lb

Specification	CB34B	CP5	CS5	CB434D	CP7	CS7
Turning Radius - Inside Drum Edge	116.4 in	103 in	103 in	138 in	10 ft	10 ft
Curb Clearance	625 mm (25 in), QEHQ1700	13.5 in	13.5 in	28 in	14.6 in	14.5 in

Specification	PS150C	CW14
Number Of Wheels	9	9 or 11
Compaction Width	68 in	68 in

Specification	PS150C
Turning Radius - Inside	15.25 ft

Specification	CW14
Turning Radius - Outside	21.1 in paired with 6.45 mm is an inconsistent manufacturer web row; a usable outside radius is not established by those units
Rolling Width	68 in
Turning Radius - Inside (1)	4.68 m is the separate inside-radius metric row; the 15.1 in / 4.68 mm pair in this row is malformed
Turning Radius - Inside (2)	15.1 ft

Transmission and speeds
Specification	CB34B	CW14
Max Speed	8 mph	11 mph

Weights
Specification	CB34B	CB434D
Operating Weight	8,157 lb	16,270 lb

Specification	CB34B
Maximum Weight At Front Drum	3,974 lb
Maximum Weight At Rear Drum	4,180 lb

Specification	CP5	CS5	CP7	CS7
Operating Weight - With ROPS/FOPS Canopy	10,307 lb	10,075 lb	16,182 lb	15,487 lb
Weight - Drum with ROPS/FOPS Canopy	4,872 lb	4,625 lb	7,970 lb	7,408 lb

Specification	CS5	CP7	CS7
Operating Weight - With Cab	25,353 lb (11,500 kg) is an inconsistent extra web row beside the 4,570 kg canopy CS5; a corresponding cab configuration is not established, so this is not a transport weight	16,810 lb	16,116 lb

Specification	PF300B	PS300B	PS300C	PS150C	PS200B
Operating Weight - Standard	30,860 lb	30,860 lb	14,000 lb	10,770 lb	10,925 lb
Operating Weight - Max Ballast	50,820 lb	50,820 lb	2,500 lb	28,528 lb	40,000 lb
Average Weight Per Wheel - Max Ballast	7,260 lb	7,260 lb	2,500 lb	3,175 lb	4,444 lb

Specification	PS300C	PS150C
Average Weight Per Wheel - Standard	3,000 lb	1,202 lb

Specification	CP7	CS7
Weight - Drum with Cab	8,179 lb	7,628 lb

Specification	PS150C	CW14
Operating Weight - No Ballast	10,775 lb	10,770 lb
Average Weight Per Wheel - No Ballast	1,200 lb	1,190 lb
Average Weight Per Wheel - Maximum Ballast	3,180 lb	The original 1,212 lb entry does not match the maximum-ballast schedule. QEXQ1622-02 gives 1.44 metric tonnes per wheel with wet sand on the standard nine-wheel machine; heavy-weight configuration separately 1.92 tonnes.
Operating Weight - Maximum Ballast	28,535 lb	28,528 lb

Specification	CW14
Operating Weight - Standard Machine Empty	10,770 lb
Operating Weight - Maximum Water Ballast	19,202 lb
Operating Weight - Maximum Wet Sand Ballast	28,528 lb
Average Weight Per Wheel	2,116 lb
Operating Weight - Maximum Ballast, Hw Option	38,000 lb
Average Weight Per Wheel - Maximum Ballast, Hw Option	4,233 lb
Operating Weight - Without Ballast - Heavy Weight Option	10,924 lb
Operating Weight - With Maximum Ballast - Heavy Weight Option	38,000 lb
Operating Weight - Per Wheel - Heavy Weight Option	4,233 lb

Service Refill Capacities
Specification	CB34B	CP5	CS5	CB434D	CP7	CS7	PS150C	CW14
Fuel Tank Capacity	24 gal	29.9 gal (US)	29.9 gal (US)	35 gal	37 gal (US)	37 gal (US)	45.6 gal	45.6 gal

Specification	CB34B	CB434D	PS150C	CW14
Water Spray Tank Capacity	81 gal	211 gal	104 gal	104 gal

Specification	CP5	CS5	CP7	CS7
Cooling System	4.1 gal (US)	4.1 gal (US)	4.8 gal (US)	4.8 gal (US)
Engine Oil - With Filter	2.2 gal (US)	2.2 gal (US)	2.8 gal (US)	2.8 gal (US)
Eccentric Weight Housings (combined)	14 gal (US)	14 gal (US)	3.4 gal (US)	3.4 gal (US)
Axle and Final Drives	1.9 gal (US)	1.9 gal (US)	3.9 gal (US)	3.9 gal (US)
Hydraulic Tank	9.4 gal (US)	9.4 gal (US)	6.9 gal (US)	6.9 gal (US)

Specification	CP7	CS7
DEF Tank	2.4 gal (US)	2.4 gal (US)

Vibratory System
Specification	CB34B	CP5	CS5	CB434D	CP7	CS7
Nominal Amplitude - High	0.50 mm (0.020 in), QEHQ1700	0.051 in	0.051 in	0.1 in	0.061 in	0.066 in

Specification	CB34B	CB434D
Centrifugal Force Per Drum - Maximum	33.9 kN (7,621 lbf), standard CB34B, QEHQ1700	17,550 lb
Frequency	55/48 Hz (3,300/2,880 vpm), QEHQ1700	70/53 Hz (4,200/3,200 vpm)
Centrifugal Force Per Drum - Minimum	25.9 kN (5,823 lbf), standard CB34B, QEHQ1700	6,525 lb

Specification	CP5	CS5	CP7	CS7
Vibratory Frequency - Standard	2150 VPM	2150 VPM	1915 VPM	1915 VPM
Centrifugal Force - Maximum	17,535 lb	17,535 lb	29,991 lb	29,991 lb

Specification	CS5	CS7
Static Linear Load - With ROPS/FOPS Canopy	90.2 lb/in	112.6 lb/in

Specification	CB434D	CP7	CS7
Nominal Amplitude - Low	0.1 in	0.031 in	0.033 in

Specification	CP7	CS7
Variable Frequency Option Range	23.3-31.9 Hz (1,400-1,915 vpm)	23.3-31.9 Hz (1,400-1,915 vpm)
Centrifugal Force - Minimum	15,057 lb	15,057 lb

Specification	CS7
Static Linear Load - With Cab	115.9 lb/in

Tires
Specification	PF300B	PS300B	PS300C	PS150C	PS200B
Number Of Tires - Front	3	3	3	5	5
Number Of Tires - Rear	4	4	3	4	4

Specification	PF300B	PS300B	PS150C	PS200B
Standard Tire Size	13/80 x 20	13/80 x 20	8.50/90x15 6-ply	7.5 x 15-6 ply

Specification	PF300B	PS300B	PS150C
Wheel Track/Tire Overlap	1.9 in	1.9 in	0.6 in

Specification	PS150C
Oscillation Angle	4.4 degrees

Specification	PS150C	CW14
Tires	6-ply 8.50/90 x 15	7.5 x 15

Sustainability
Specification	CP7	CS7
Recyclability	97%	96%

Variants — Source comparison annotation
Source guide	Differing-field count reported
CB34B and 15 related models	121

Ratios
Figure	CB334E	CB334EXW	CB335E	CB34B	CB544	CB434D	PF300B	PS300B	PS300C	PS150C	PS200B	CW14
Engine horsepower per 1,000 lb of weight	5.1	4.8	5.5	6.0	3.1	4.7	3.4	3.4	6.1	9.0	9.6	9.3

Figure	CB334E	CB334EXW	CB335E	CB34B	CP5	CS5	CB544	CB434D	PF300B	PS300B	PS300C	CP7	CS7	PS150C	PS200B	CW14
Fuel tank per engine horsepower	0.34 gal	0.34 gal	0.34 gal	0.49 gal	0.42 gal	0.42 gal	0.75 gal	0.44 gal	0.48 gal	0.48 gal	0.67 gal	0.39 gal	0.39 gal	0.47 gal	0.44 gal	0.45 gal

CB34B and 15 related models: forum references

Related discussion: “CAT 215 Track Rollers”: 825H and 6 related models.

Used market for the CB34B and 15 related models — Dated first-page listing snapshot
Observation date	Listing source	Equipment search	Listings
2026-09-24	MachineryTrader	Cat soil or asphalt compactor	50

Model	Listed	Model years	Lowest asking	Highest asking	Median asking	Median hours
CB34B	17	2015 to 2020	$19,500	$39,900	$33,000	2,020
CP5	1	2024	$119,400	$119,400	$119,400	None shown
CS5	6	2024 to 2026	$103,000	$125,000	$123,750	None shown
CP7	9	2024 to 2026	$170,028	$213,900	$195,350	None shown
CS7	15	2024 to 2026	$140,000	$185,000	$176,400	None shown
CW14	2	2014 to 2015	$47,500	$60,268	$53,884	None shown

CB34B and 15 related models: recall reference — Dated CPSC search
Search date	Database	Names queried	Search result
2026-09-24	U.S. Consumer Product Safety Commission	Cat together with the soil or asphalt compactor CB334E, CB334EXW, CB335E, CB34B	No matching recall in this search

Sources for this page
Evidence class	Document, classification and recorded date
Reference site	Reference site: Cat CB334E — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CB334EXW — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CB335E — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CB34B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CP5 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CS5 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CB544 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CB434D — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PF300B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PS300B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PS300C — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CP7 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CS7 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PS150C — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PS200B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat CW14 — RitchieSpecs. Observed 2026-09-24.
Used-market listings	Used-market listings: MachineryTrader listings for Cat CB34B — MachineryTrader. Observed 2026-09-24.
Federal agency data	Federal agency data: Recall database search for Cat — U.S. Consumer Product Safety Commission. Observed 2026-09-24.

Recorded observations — Classification in the linked listing
Guide	As-listed machine class
Cat CB34B, CS5 and CW14: paving, soil and tire equipment	soil or asphalt compactor