FieldSpec
Equipment menu

Machine models

Cat D11N to D11T CD: Carrydozer equipment and controls

A D11T Carrydozer has a different frame and blade package

The January2016 D11T brochure describes a Carrydozer frame designed for the extra loads from its blade. The CD designation is therefore more than a wider blade fitted to an otherwise identical tractor. Its pump delivery and tilt-circuit figures occupy separate columns from the ordinary D11T.

The engine and radiator choices also depend on the emissions package. Both published C32 versions share the advertised net rating, but their gross ratings differ. The Mesabi radiator is standard on the Tier4Final version and optional on the other configuration; the aluminum bar-plate radiator is offered only with Tier2-equivalent emissions.

Identify the engine arrangement before matching cooling parts.

Shipping mass needs particular care. This brochure's shipping figure describes a stripped base chassis without tracks, roller frames, blade or ripper. It cannot be used as the transport weight of a complete operating tractor.

The operating columns include specified blades, rear attachments, shoes, fluids and the operator.

Source: Caterpillar AEHQ6785-03, January2016, frame, cooling and configuration specifications.

Early D11T AutoCarry uses radar and a lift-cylinder sensor

Caterpillar's May2008 training guide covers specified GEB and TPB machines. It identifies the optional AutoCarry hardware as a right lift-cylinder position sensor, a dynamic inclination sensor and ground-speed radar. The radar looks rearward through an opening in the bottom guard.

Those details give a buyer something concrete to inspect when a seller advertises automatic blade control.

Dual Tilt and Auto Blade Assist are prerequisites in that guide. AutoCarry operates during the carry segment in first gear forward, while the blade remains manually controllable. An illuminated mode switch alone is not evidence that the sensors, software and hydraulic arrangement are complete.

The early system's diverter returns lift-pump flow to the tank during automatic carrying, leaving the tilt pump to supply the dozer valve and limiting heat generation. A technician investigating an AutoCarry hydraulic complaint must distinguish that commanded diversion from a general loss of implement delivery. The later brochure describes GNSS-based sensing, so its equipment description should not be projected backwards onto every early tractor.

Source: Caterpillar SERV1845-01, May2008, AutoCarry components and operating sequence.
Earlier reference entries and original manufacturer corrections
Model and fieldEarlier entryManufacturer figure and scopeSource
D11T Engine Model3508BCat C32 ACERT;SERV1845-01 May2008 GEB160-up;3508B belongs to earlierD11ROriginal document
D11T Cooling System Fluid Capacity63.1 gal269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separateOriginal document
D11T Engine Oil Capacity28.1 gal103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separateOriginal document
D11T Hydraulic Fluid Capacity64.2 gal223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03Original document
D11T Final Drives Fluid Capacity8 gal47L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-03Original document
D11T CD Cooling System Fluid Capacity238.8 gal269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separateOriginal document
D11T CD Engine Oil Capacity106 gal103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separateOriginal document
D11T CD Hydraulic Fluid Capacity64.2 gal223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03Original document
D11T CD Final Drives Fluid Capacity8 gal47L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-03Original document
D11T Height To Top Of Cab13.4 ft4,405mm (173.4in) FOPS CAB;4,723mm185.9in ROPS/CANOPY;January2016AEHQ6785-03 includesgrouserOriginal document
D11T Length Of Track On Ground12.67 ft4,444mm (175.0in),January2016AEHQ6785-03Original document
D11T Ground Clearance2.22 ftJanuary2016AEHQ6785-03:dimensions798mm31.4in;undercarriage777mm30.6in;document discrepancy retainedOriginal document
D11T Relief Valve Pressure3,500 psi22,750kPa (3,300psi) D11T BLADE/RIPPER;tilt24,300kPa3,525psi,January2016AEHQ6785-03Original document
D11T Pump Flow Capacity66 gpm620L/min (164gpm),COMBINED IMPLEMENT output at1,800rpm/6,895kPa;January2016AEHQ6785-03Original document
D11T CD Pump Flow Capacity66 gpm250L/min (66gpm),TILT CYLINDER FLOW;implement pump670L/min177gpm separate;January2016AEHQ6785-03Original document
D11T CD Cutting Depth67.2 in1,708mm (67.2in),11CD blade at FULL DUMP;688mm27.1in atRACK BACK;January2016AEHQ6785-03Original document
D11T CD Blade height108 in2,955mm (116.3in),11CD blade,January2016AEHQ6785-03;earlier reference retained separatelyOriginal document
Entries in this reference
Listing-entry count
5
Short answer

Cat D11N to D11T CD: Carrydozer equipment and controls: crawler dozers.

Selected configuration figures
ConfigurationDocumented field and quantity
D11N
Gross Power
770 hp
Operating Weight
211,304 lb
D11R
Gross Power
915 hp
Operating Weight
225,500 lb
D11R CD
Gross Power
915 hp
Operating Weight
239,550 lb
D11T
Gross Power
935 hp
Operating Weight
230,582 lb
D11T CD
Gross Power
935 hp
Operating Weight
248,600 lb
D11N to D11T CD specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
CatD11N to D11T CD5D11N, D11R, D11R CD, D11T, and D11T CD
Dimensions and weight
SpecificationD11ND11RD11R CDD11TD11T CD
Length W/ Blade27.53 ft28.97 ft27.37 ft34.9 ft35.83 ft
Width Over Tracks12.41 ft11.82 ft11.82 ft11.84 ft12.49 ft
Height To Top Of Cab14.97 ft15.29 ft15.29 ft4,405mm (173.4in) FOPS CAB;4,723mm185.9in ROPS/CANOPY;January2016AEHQ6785-03 includesgrouser15.33 ft
Length Of Track On Ground14.57 ft14.57 ft14.59 ft4,444mm (175.0in),January2016AEHQ6785-0314.59 ft
Ground Clearance2.05 ft2.05 ft2.05 ftJanuary2016AEHQ6785-03:dimensions798mm31.4in;undercarriage777mm30.6in;document discrepancy retained2.05 ft
Length W/O Blade20.21 ft20.21 ft20.22 ft19.75 ft19.75 ft
Undercarriage
SpecificationD11ND11RD11R CDD11TD11T CD
Track Gauge9.49 ft9.5 ft9.51 ft9.51 ft9.51 ft
Standard Shoe Size27.96 in27.96 in35.83 in27.96 in35.83 in
Ground Contact Area9,796 in29,781 in212,581 in29,781 in212,581 in2
SpecificationD11ND11RD11R CDD11T
Number Of Track Rollers Per Side8888
Ground Pressure21.62 psi23.57 psi19.77 psi20.03 psi
SpecificationD11R CDD11TD11T CD
Number Of Shoes Per Side414141
Track Pitch12.52 in12.5 in12.5 in
Engine
SpecificationD11ND11RD11R CDD11TD11T CD
Gross Power770 hp915 hp915 hp935 hp935 hp
Displacement2,105 cu in2,105 cu in2,105 cu in1,959 cu in1,959 cu in
AspirationTurbochargedTurbocharged and AftercooledTurbocharged and AftercooledTurbochargedTurbocharged
SpecificationD11RD11R CDD11TD11T CD
Number Of Cylinders881212
Engine Model3508B3508BCat C32 ACERT;SERV1845-01 May2008 GEB160-up;3508B belongs to earlierD11RC32 ACERT
Net Power850 hp850 hp850 hp850 hp
Power Measured @1,800 rpm1,800 rpm1,800 rpm1,800 rpm
Operational
SpecificationD11ND11RD11R CDD11TD11T CD
Operating Weight211,304 lb225,500 lb239,550 lb230,582 lb248,600 lb
Fuel Capacity393.7 gal388.6 gal388.6 gal425.1 gal426 gal
Hydraulic Fluid Capacity44.7 gal54.2 gal54.2 gal223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03
SpecificationD11RD11R CDD11TD11T CD
Cooling System Fluid Capacity61.1 gal61.1 gal269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separate269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separate
Engine Oil Capacity28.1 gal28.1 gal103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separate103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separate
Powertrain Fluid Capacity90.9 gal90.9 gal91 gal91 gal
Final Drives Fluid Capacity8 gal8 gal47L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-0347L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-03
Operating Voltage24 V24 V24 V24 V
Alternator Supplied Amperage100 amps100 amps100 amps100 amps
Transmission and speeds
SpecificationD11ND11RD11R CDD11TD11T CD
Transmission TypepowershiftPower shiftPower ShiftPower ShiftPowershift
Number Of Forward Gears33333
Number Of Reverse Gears33333
Max Speed - Forward7.3 mph7.3 mph7.3 mph7.3 mph7.3 mph
Max Speed - Reverse8.8 mph8.7 mph8.7 mph8.7 mph8.7 mph
Hydraulic System
SpecificationD11ND11TD11T CD
Relief Valve Pressure3,300 psi22,750kPa (3,300psi) D11T BLADE/RIPPER;tilt24,300kPa3,525psi,January2016AEHQ6785-033,500 psi
Pump Flow Capacity161.2 gpm620L/min (164gpm),COMBINED IMPLEMENT output at1,800rpm/6,895kPa;January2016AEHQ6785-03250L/min (66gpm),TILT CYLINDER FLOW;implement pump670L/min177gpm separate;January2016AEHQ6785-03
SpecificationD11TD11T CD
Pump TypeGear drivengear driven
Standard Blade
SpecificationD11ND11RD11R CDD11TD11T CD
Blade width18.4 ft20.9 ft22.1 ft18.4 ft22 ft
Blade height91 in93.4 in128.2 in109 in2,955mm (116.3in),11CD blade,January2016AEHQ6785-03;earlier reference retained separately
Capacity33.5 yd345 yd357 yd335.5 yd357 yd3
Cutting Depth30.5 in30.2 in30.2 in30.2 in1,708mm (67.2in),11CD blade at FULL DUMP;688mm27.1in atRACK BACK;January2016AEHQ6785-03
Variants — Source comparison annotation
Source guideDiffering-field count reported
D11N to D11T CD38
Ratios
FigureD11ND11RD11R CDD11TD11T CD
Engine horsepower per 1,000 lb of weight3.63.83.53.73.4
Fuel tank per engine horsepower0.51 gal0.46 gal0.46 gal0.50 gal0.50 gal
Reference calculations using the earlier specification entries
FigureD11ND11TD11T CD
Pump flow per engine horsepower0.21 gpm0.08 gpm0.08 gpm

History and service record of D11N to D11T CD

  • What it replaced. Caterpillar introduced the 770 hp D11N in 1986 to replace the original D10, at the same time it renumbered the rest of the large-dozer line up one step (D9L became the D10N's lineage, D8L became the D9N's); a two-page feature on the original D10's 1977 launch in Excavating Contractor magazine had called it "Cat Uncorks The New D10." Caterpillar D10, historical overview.
  • Elevated sprocket design. Like the D9 and D10, the D11 uses the elevated drive sprocket Caterpillar introduced on the original D10 in the 1970s, lifting the sprocket away from ground dirt and debris to cut undercarriage wear and ease maintenance. Wikipedia, Caterpillar D10.

D11N to D11T CD: forum references

Related discussion: “Komatsu D455 Vs CAT D11”: D11 and D11 XE.

Used market for the D11N to D11T CD — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderCat crawler dozer70
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
D11N111988 to 1992$8,500$225,000$100,0005,000
D11R371996 to 2009$96,500$700,000$379,4403,812
D11T222008 to 2026$246,295$1,477,770$559,4427,060
D11N to D11T CD: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionCat together with the crawler dozer D11N, D11R, D11R CD, D11TNo matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
  • Reference site: Cat D11N — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: Cat D11R — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: Cat D11R CD — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: Cat D11T — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: Cat D11T CD — RitchieSpecs. Observed 2026-09-24.
Published history
Published history
Used-market listings
Federal agency data
Recorded observations — Forum-title snapshot
Observation fieldRecorded value
Title count27
Forum indexesHeavy Equipment Forums
Search wordingthe D11N to D11T CD crawler dozer
Latest title quoted by the referenceKomatsu D455 Vs CAT D11

Cat D11N to D11T CD: Carrydozer equipment and controls: Configuration records

D11N
SpecificationSource figure
Engine
Displacement2,105 cu in
Gross Power770 hp
AspirationTurbocharged
Transmission and speeds
Transmission Typepowershift
Number Of Forward Gears3
Number Of Reverse Gears3
Max Speed - Forward7.3 mph
Max Speed - Reverse8.8 mph
Dimensions and weight
Length W/ Blade27.53 ft
Width Over Tracks12.41 ft
Height To Top Of Cab14.97 ft
Length Of Track On Ground14.57 ft
Length W/O Blade20.21 ft
Operational
Fuel Capacity393.7 gal
Hydraulic Fluid Capacity44.7 gal
Undercarriage
Track Gauge9.49 ft
Standard Shoe Size27.96 in
Number Of Track Rollers Per Side8
Standard Blade
Capacity33.5 yd3
Cutting Depth30.5 in
Hydraulic System
Relief Valve Pressure3,300 psi
Pump Flow Capacity161.2 gpm
Additional specifications
Ground Clearance2.05 ft
Ground Contact Area9,796 in2
Ground Pressure21.62 psi
Operating Weight211,304 lb
Blade width18.4 ft
Blade height91 in

Source

D11R
SpecificationSource figure
Engine
Engine Model3508B
Displacement2,105 cu in
Number Of Cylinders8
Gross Power915 hp
Net Power850 hp
Power Measured @1,800 rpm
AspirationTurbocharged and Aftercooled
Transmission and speeds
Transmission TypePower shift
Number Of Forward Gears3
Number Of Reverse Gears3
Max Speed - Forward7.3 mph
Max Speed - Reverse8.7 mph
Dimensions and weight
Length W/ Blade28.97 ft
Width Over Tracks11.82 ft
Height To Top Of Cab15.29 ft
Length Of Track On Ground14.57 ft
Length W/O Blade20.21 ft
Operational
Fuel Capacity388.6 gal
Operating Voltage24 V
Alternator Supplied Amperage100 amps
Cooling System Fluid Capacity61.1 gal
Engine Oil Capacity28.1 gal
Hydraulic Fluid Capacity54.2 gal
Powertrain Fluid Capacity90.9 gal
Final Drives Fluid Capacity8 gal
Undercarriage
Track Gauge9.5 ft
Standard Shoe Size27.96 in
Number Of Track Rollers Per Side8
Standard Blade
Capacity45 yd3
Cutting Depth30.2 in
Additional specifications
Ground Clearance2.05 ft
Ground Contact Area9,781 in2
Ground Pressure23.57 psi
Operating Weight225,500 lb
Blade width20.9 ft
Blade height93.4 in

Source

D11R CD
SpecificationSource figure
Engine
Engine Model3508B
Displacement2,105 cu in
Number Of Cylinders8
Gross Power915 hp
Net Power850 hp
Power Measured @1,800 rpm
AspirationTurbocharged and Aftercooled
Transmission and speeds
Transmission TypePower Shift
Number Of Forward Gears3
Number Of Reverse Gears3
Max Speed - Forward7.3 mph
Max Speed - Reverse8.7 mph
Dimensions and weight
Length W/ Blade27.37 ft
Width Over Tracks11.82 ft
Height To Top Of Cab15.29 ft
Length Of Track On Ground14.59 ft
Length W/O Blade20.22 ft
Operational
Fuel Capacity388.6 gal
Operating Voltage24 V
Alternator Supplied Amperage100 amps
Cooling System Fluid Capacity61.1 gal
Engine Oil Capacity28.1 gal
Hydraulic Fluid Capacity54.2 gal
Powertrain Fluid Capacity90.9 gal
Final Drives Fluid Capacity8 gal
Undercarriage
Track Gauge9.51 ft
Standard Shoe Size35.83 in
Number Of Track Rollers Per Side8
Number Of Shoes Per Side41
Track Pitch12.52 in
Standard Blade
Capacity57 yd3
Cutting Depth30.2 in
Additional specifications
Ground Clearance2.05 ft
Ground Contact Area12,581 in2
Ground Pressure19.77 psi
Operating Weight239,550 lb
Blade width22.1 ft
Blade height128.2 in

Source

D11T
SpecificationSource figure
Engine
Engine ModelCat C32 ACERT;SERV1845-01 May2008 GEB160-up;3508B belongs to earlierD11R [source]
Displacement1,959 cu in
Number Of Cylinders12
Gross Power935 hp
Net Power850 hp
Power Measured @1,800 rpm
AspirationTurbocharged
Transmission and speeds
Transmission TypePower Shift
Number Of Forward Gears3
Number Of Reverse Gears3
Max Speed - Forward7.3 mph
Max Speed - Reverse8.7 mph
Dimensions and weight
Length W/ Blade34.9 ft
Width Over Tracks11.84 ft
Height To Top Of Cab4,405mm (173.4in) FOPS CAB;4,723mm185.9in ROPS/CANOPY;January2016AEHQ6785-03 includesgrouser [source]
Length Of Track On Ground4,444mm (175.0in),January2016AEHQ6785-03 [source]
Length W/O Blade19.75 ft
Operational
Fuel Capacity425.1 gal
Operating Voltage24 V
Alternator Supplied Amperage100 amps
Powertrain Fluid Capacity91 gal
Undercarriage
Track Gauge9.51 ft
Standard Shoe Size27.96 in
Number Of Track Rollers Per Side8
Number Of Shoes Per Side41
Track Pitch12.5 in
Standard Blade
Capacity35.5 yd3
Cutting Depth30.2 in
Hydraulic System
Pump TypeGear driven
Additional specifications
Ground ClearanceJanuary2016AEHQ6785-03:dimensions798mm31.4in;undercarriage777mm30.6in;document discrepancy retained [source]
Ground Contact Area9,781 in2
Ground Pressure20.03 psi
Operating Weight230,582 lb
January2016 Cooling System Refill269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separate [source]
January2016 Engine Oil With Filters103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separate [source]
January2016 Implement Hydraulic Tank223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03 [source]
January2016 Final Drive Refill Each47L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-03 [source]
Blade width18.4 ft
Blade height109 in
January2016 Blade And Ripper Relief22,750kPa (3,300psi) D11T BLADE/RIPPER;tilt24,300kPa3,525psi,January2016AEHQ6785-03 [source]
January2016 Combined Implement Pump Flow620L/min (164gpm),COMBINED IMPLEMENT output at1,800rpm/6,895kPa;January2016AEHQ6785-03 [source]
2008 AutoCarry Equipment BasisSERV1845-01 GEB160-up:rightliftcylindersensor,dynamicinclinationsensor,groundspeedradar;DualTiltandABAprerequisites;CARRY/firstgearforward only [source]
January2016 Operating Weight With Blade11SU+single-shank101,626kg224,047lb;11U+single-shank104,236kg229,800lb;P22equipmentbasis [source]
January2016 Engine Gross Rating By EmissionsC32:Tier2equivalent695kW932hp;Tier4Final681kW913hp;bothnet634kW850hp@1,800rpm [source]

Source

D11T CD
SpecificationSource figure
Engine
Engine ModelC32 ACERT
Displacement1,959 cu in
Number Of Cylinders12
Gross Power935 hp
Net Power850 hp
Power Measured @1,800 rpm
AspirationTurbocharged
Transmission and speeds
Transmission TypePowershift
Number Of Forward Gears3
Number Of Reverse Gears3
Max Speed - Forward7.3 mph
Max Speed - Reverse8.7 mph
Dimensions and weight
Length W/ Blade35.83 ft
Width Over Tracks12.49 ft
Height To Top Of Cab15.33 ft
Length Of Track On Ground14.59 ft
Length W/O Blade19.75 ft
Operational
Fuel Capacity426 gal
Operating Voltage24 V
Alternator Supplied Amperage100 amps
Powertrain Fluid Capacity91 gal
Undercarriage
Track Gauge9.51 ft
Standard Shoe Size35.83 in
Number Of Shoes Per Side41
Track Pitch12.5 in
Standard Blade
Capacity57 yd3
Hydraulic System
Relief Valve Pressure3,500 psi
Pump Typegear driven
Additional specifications
Ground Clearance2.05 ft
Ground Contact Area12,581 in2
Operating Weight248,600 lb
January2016 Cooling System Refill269L (71.1USgal),January2016AEHQ6785-03;earlier edition reference separate [source]
January2016 Engine Oil With Filters103L (27.2USgal) WITH FILTERS,January2016AEHQ6785-03;earlier entry separate [source]
January2016 Implement Hydraulic Tank223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03 [source]
January2016 Final Drive Refill Each47L (12.4USgal),EACH FINAL DRIVE,January2016AEHQ6785-03 [source]
Blade width22 ft
Blade height2,955mm (116.3in),11CD blade,January2016AEHQ6785-03;earlier reference retained separately [source]
Full Dump And Rack Back Digging Depth1,708mm (67.2in),11CD blade at FULL DUMP;688mm27.1in atRACK BACK;January2016AEHQ6785-03 [source]
January2016 Tilt Cylinder Flow250L/min (66gpm),TILT CYLINDER FLOW;implement pump670L/min177gpm separate;January2016AEHQ6785-03 [source]
2008 AutoCarry Equipment BasisSERV1845-01 TPB160-up:rightliftcylindersensor,dynamicinclinationsensor,groundspeedradar;DualTiltandABAprerequisites;CARRY/firstgearforward only [source]
January2016 Operating Weight With Blade11CD+single-shank112,718kg248,500lb;P22equipmentbasis [source]
January2016 Engine Gross Rating By EmissionsC32:Tier2equivalent695kW932hp;Tier4Final681kW913hp;bothnet634kW850hp@1,800rpm [source]

Source

Compare Cat D11N, D11R, D11R CD, D11T, D11T CD
Dimensions and weight
SpecificationD11ND11RD11R CDD11TD11T CD
Length W/ Blade27.53 ft28.97 ft27.37 ft34.9 ft35.83 ft
Width Over Tracks12.41 ft11.82 ft11.82 ft11.84 ft12.49 ft
Height To Top Of Cab14.97 ft15.29 ft15.29 ft4,405mm (173.4in) FOPS CAB;4,723mm185.9in ROPS/CANOPY;January2016AEHQ6785-03 includesgrouser [source]15.33 ft
Length Of Track On Ground14.57 ft14.57 ft14.59 ft4,444mm (175.0in),January2016AEHQ6785-03 [source]14.59 ft
Ground Clearance2.05 ft2.05 ft2.05 ftJanuary2016AEHQ6785-03:dimensions798mm31.4in;undercarriage777mm30.6in;document discrepancy retained [source]2.05 ft
Length W/O Blade20.21 ft20.21 ft20.22 ft19.75 ft19.75 ft
Undercarriage
SpecificationD11ND11RD11R CDD11TD11T CD
Track Gauge9.49 ft9.5 ft9.51 ft9.51 ft9.51 ft
Standard Shoe Size27.96 in27.96 in35.83 in27.96 in35.83 in
Ground Contact Area9,796 in29,781 in212,581 in29,781 in212,581 in2
Engine
SpecificationD11ND11RD11R CDD11TD11T CD
Gross Power770 hp915 hp915 hp935 hp935 hp
Displacement2,105 cu in2,105 cu in2,105 cu in1,959 cu in1,959 cu in
AspirationTurbochargedTurbocharged and AftercooledTurbocharged and AftercooledTurbochargedTurbocharged
Operational
SpecificationD11ND11RD11R CDD11TD11T CD
Operating Weight211,304 lb225,500 lb239,550 lb230,582 lb248,600 lb
Fuel Capacity393.7 gal388.6 gal388.6 gal425.1 gal426 gal
Measurement and equipment basis (specified in each cell)44.7 gal54.2 gal54.2 gal223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03 [source]223L (58.9USgal),IMPLEMENT HYDRAULIC TANK ONLY,January2016AEHQ6785-03 [source]
Transmission and speeds
SpecificationD11ND11RD11R CDD11TD11T CD
Transmission TypepowershiftPower shiftPower ShiftPower ShiftPowershift
Number Of Forward Gears33333
Number Of Reverse Gears33333
Max Speed - Forward7.3 mph7.3 mph7.3 mph7.3 mph7.3 mph
Max Speed - Reverse8.8 mph8.7 mph8.7 mph8.7 mph8.7 mph
Standard Blade
SpecificationD11ND11RD11R CDD11TD11T CD
Blade width18.4 ft20.9 ft22.1 ft18.4 ft22 ft
Blade height91 in93.4 in128.2 in109 in2,955mm (116.3in),11CD blade,January2016AEHQ6785-03;earlier reference retained separately [source]
Capacity33.5 yd345 yd357 yd335.5 yd357 yd3
Measurement and equipment basis (specified in each cell)30.5 in30.2 in30.2 in30.2 in1,708mm (67.2in),11CD blade at FULL DUMP;688mm27.1in atRACK BACK;January2016AEHQ6785-03 [source]

More in Cat: 854G/854K: cooling circuits/blade controls/editions, D10T WH, 854.