FieldSpec
Equipment menu

Hyundai model reference

The November 2023 Hyundai HX35AZ/HX40A/HX48AZ brochure lists 4390 kg for the HX40A and 5030 kg for the HX48AZ in its stated configurations. The 640 kg difference is about 14.6% of the lighter entry. Keep that document’s market and equipment assumptions with a transport comparison; other regional configurations can differ.

HX40A and HX48AZ have different transport masses

An excavator lift figure needs its chart conditions

The HX130A LCR lifting sheet separates arm lengths, counterweights, shoe width and dozer configurations. Its lifting point is the arm’s bucket pivot and its figures exclude bucket mass. A maximum capacity without the required radius, height, direction and support setup cannot establish an approved lift.

The historical R-series machines below retain their own specifications. A later HX or HX-A document must not replace an older R160LC-7 figure solely because the machine classes look similar.

Likewise, HL standard, TM and XTD loader arrangements keep their own attachment geometry and operating mass. Use the complete model and serial configuration for parts, lifting and hauling.

HX130A LCR chart symbols distinguish two limits

The North American HX130A LCR specification sheet marks a hydraulically limited lift with an asterisk. Its notes distinguish the hydraulic constraint from the tipping-load constraint, using firm and level ground as the stated condition. A larger breakout-force figure elsewhere on the sheet does not replace either lift limit.

Read the chosen chart’s heading before extracting a capacity: the sheet provides separate arrangements without the dozer and with the dozer lowered, together with over-front and over-side values. The attachment is another necessary input because the chart’s lift point is the arm’s bucket-pivot pin and bucket mass is excluded. An attached bucket or coupler cannot be treated as weightless.

Keep those deductions and the correct support arrangement with the planned lift; a model name and nominal operating weight alone do not identify the usable chart cell.

Doosan specifications · Kobelco specifications · Tractor and compact equipment models: Model directory

Hyundai HL730-7 to HL770-7A

ModelSelected specifications
HL730-7
Net Power
119 hp
Operating Weight
21,385 lb
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
22.48 ft
Dump Clearance At Max Raise
8.96 ft
HL730-7A
Net Power
119 hp
Operating Weight
21,400 lb
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
22.48 ft
Dump Clearance At Max Raise
8.96 ft
Hyundai HL730TM-7
Net Power
119 hp
Operating Weight
22,046 lb
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
22.97 ft
Dump Clearance At Max Raise
9.14 ft
Hyundai HL730TM-7A
Net Power
119 hp
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
22.97 ft
Dump Clearance At Max Raise
9.14 ft
Bucket Capacity - Heaped
2.1 yd3
Hyundai HL730XTD-7
Net Power
119 hp
Operating Weight
21,830 lb
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
23.63 ft
Dump Clearance At Max Raise
10.04 ft
Hyundai HL730XTD-7A
Net Power
119 hp
Operating Weight
21,826 lb
Pump Flow Capacity
37 gpm
Length With Bucket On Ground
23.63 ft
Dump Clearance At Max Raise
10.04 ft
Hyundai HL740-7
Gross Power
133 hp
Operating Weight
25,350 lb
Pump Flow Capacity
46.8 gpm
Bucket Width
8.37 ft
Dump Clearance At Max Raise
9.36 ft
Hyundai HL740-7A
Gross Power
138 hp
Operating Weight
25,463 lb
Pump Flow Capacity
47.3 gpm
Length With Bucket On Ground
23.86 ft
Dump Clearance At Max Raise
9.36 ft
Hyundai HL740TM-7
Gross Power
133 hp
Operating Weight
26,566 lb
Pump Flow Capacity
46.8 gpm
Bucket Width
8.37 ft
Dump Clearance At Max Raise
9.57 ft
HL740XTD-7
Gross Power
133 hp
Operating Weight
26,120 lb
Pump Flow Capacity
46.8 gpm
Bucket Width
8.37 ft
Dump Clearance At Max Raise
10.73 ft
HL760-9A
Net Power
222.7 hp
Operating Weight
40,455 lb
Pump Flow Capacity
61.6 gpm
Bucket Width
9.52 ft
Dump Clearance At Max Raise
9.75 ft
HL770-7A
Net Power
266 hp
Operating Weight
50,927 lb
Pump Flow Capacity
112.3 gpm
Bucket Width
10.18 ft
Dump Clearance At Max Raise
10.23 ft

Buying and ownership: Hyundai HL730-7 to HL770-7A

Hyundai HL740-9 to HL940

ModelSelected specifications
HL740-9
Net Power
143 hp
Operating Weight
26,456 lb
Pump Flow Capacity
41 gpm
Length With Bucket On Ground
24.22 ft
Dump Clearance At Max Raise
9.14 ft
HL740-9A
Net Power
156 hp
Operating Weight
28,000 lb
Length With Bucket On Ground
24.1 ft
Dump Clearance At Max Raise
9.14 ft
Bucket Capacity - Struck
2.62 yd3
Hyundai HL740TM-9
Net Power
143 hp
Operating Weight
27,778 lb
Pump Flow Capacity
41 gpm
Length With Bucket On Ground
25.14 ft
Dump Clearance At Max Raise
9.32 ft
Hyundai HL740XTD-9
Net Power
143 hp
Operating Weight
27,117 lb
Pump Flow Capacity
41 gpm
Length With Bucket On Ground
25.69 ft
Dump Clearance At Max Raise
10.54 ft
Hyundai HL757-9
Net Power
170 hp
Operating Weight
31,967 lb
Pump Flow Capacity
48.9 gpm
Length With Bucket On Ground
24.87 ft
Dump Clearance At Max Raise
9.32 ft
Hyundai HL757-9A
Net Power
197 hp
Operating Weight
32,408 lb
Pump Flow Capacity
48.9 gpm
Bucket Width
8.99 ft
Dump Clearance At Max Raise
9.32 ft
Hyundai HL757TM-9
Net Power
170 hp
Operating Weight
33,070 lb
Pump Flow Capacity
48.9 gpm
Length With Bucket On Ground
25.53 ft
Dump Clearance At Max Raise
9.32 ft
Hyundai HL757XTD-9
Net Power
170 hp
Operating Weight
33,069 lb
Pump Flow Capacity
48.9 gpm
Length With Bucket On Ground
26.22 ft
Dump Clearance At Max Raise
10.6 ft
Hyundai HL760-7A
Net Power
205 hp
Operating Weight
39,463 lb
Pump Flow Capacity
74 gpm
Length With Bucket On Ground
26.45 ft
Dump Clearance At Max Raise
9.85 ft
Hyundai HL760-9
Net Power
212 hp
Operating Weight
39,463 lb
Pump Flow Capacity
61.6 gpm
Bucket Width
9.52 ft
Dump Clearance At Max Raise
9.75 ft
Hyundai HL760XTD-9
Net Power
212 hp
Operating Weight
41,227 lb
Pump Flow Capacity
61.6 gpm
Bucket Width
9.52 ft
Dump Clearance At Max Raise
11.36 ft
HL940
Net Power
156 hp
Operating Weight
28,881 lb
Pump Flow Capacity
39 gpm
Bucket Width
8.54 ft
Dump Clearance At Max Raise
9.14 ft

Buying and ownership: Hyundai HL740-9 to HL940

Hyundai HL770-7 to HL780XTD-9

ModelSelected specifications
HL770-7
Net Power
266 hp
Operating Weight
50,265 lb
Pump Flow Capacity
108.6 gpm
Bucket Width
10.18 ft
Dump Clearance At Max Raise
10.43 ft
HL770-9
Net Power
277 hp
Operating Weight
50,927 lb
Pump Flow Capacity
90.4 gpm
Bucket Width
10.18 ft
Dump Clearance At Max Raise
10.14 ft
Hyundai HL770XTD-7
Net Power
266 hp
Operating Weight
51,919 lb
Pump Flow Capacity
108.6 gpm
Bucket Width
10.18 ft
Dump Clearance At Max Raise
11.72 ft
Hyundai HL770XTD-9
Net Power
277 hp
Operating Weight
52,580 lb
Pump Flow Capacity
90.4 gpm
Bucket Width
10.18 ft
Dump Clearance At Max Raise
11.62 ft
Hyundai HL780-3A
Net Power
320 hp
Operating Weight
64,596 lb
Pump Flow Capacity
125 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
10.99 ft
Hyundai HL780-7A
Net Power
320 hp
Operating Weight
64,596 lb
Pump Flow Capacity
127.4 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
10.83 ft
Hyundai HL780-9
Net Power
344 hp
Operating Weight
66,139 lb
Pump Flow Capacity
111 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
10.83 ft
HL780XTD-3A
Net Power
320 hp
Operating Weight
65,036 lb
Pump Flow Capacity
125 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
12.11 ft
HL780XTD-7A
Net Power
320 hp
Operating Weight
66,139 lb
Pump Flow Capacity
127.4 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
12.21 ft
HL780XTD-9
Net Power
344 hp
Operating Weight
67,902 lb
Pump Flow Capacity
111 gpm
Bucket Width
11.32 ft
Dump Clearance At Max Raise
12.05 ft

Buying and ownership: Hyundai HL770-7 to HL780XTD-9

Hyundai HSL215T and 9 related models

ModelSelected specifications
Hyundai HSL400T
Gross Power
19.8 hp
Operational Weight
3,001 lb
Pump Flow Capacity
8.1 gpm
Length With Bucket
8.77 ft
Width Over Tires
2.98 ft
HSL215T
Gross Power
25 hp
Operational Weight
1,750 lb
Pump Flow Capacity
8.6 gpm
Length With Bucket
6.61 ft
Width Over Tires
3.31 ft
Hyundai HSL240T
Gross Power
25 hp
Operational Weight
2,200 lb
Pump Flow Capacity
8.6 gpm
Length With Bucket
6.61 ft
Width Over Tires
3.53 ft
Hyundai HSL275T
Gross Power
25 hp
Operational Weight
2,350 lb
Pump Flow Capacity
8.6 gpm
Length With Bucket
6.65 ft
Width Over Tires
3.51 ft
Hyundai HSL500T
Gross Power
33 hp
Operational Weight
3,702 lb
Pump Flow Capacity
8.8 gpm
Length With Bucket
9.59 ft
Width Over Tires
4.23 ft
Hyundai HSL600T
Gross Power
43 hp
Operational Weight
5,351 lb
Pump Flow Capacity
16.6 gpm
Length With Bucket
10.65 ft
Width Over Tires
4.8 ft
Hyundai HSL680T
Gross Power
50 hp
Operational Weight
5,571 lb
Pump Flow Capacity
16.6 gpm
Length With Bucket
10.65 ft
Width Over Tires
4.8 ft
Hyundai HSL800T
Gross Power
59.5 hp
Operational Weight
7,000 lb
Pump Flow Capacity
16.6 gpm
Length With Bucket
11.61 ft
Width Over Tires
5.67 ft
Hyundai HSL610
Gross Power
41.4 hp
Operational Weight
5,247 lb
Pump Flow Capacity
16.2 gpm
Length With Bucket
10.66 ft
Width Over Tires
5.01 ft
Hyundai HSL650-7
Gross Power
44.2 hp
Operational Weight
5,787 lb
Pump Flow Capacity
18.4 gpm
Length With Bucket
10.73 ft
Width Over Tires
4.98 ft

Buying and ownership: Hyundai HSL215T and 9 related models

Hyundai HSL810 to HSL1500T

ModelSelected specifications
Hyundai HSL960T
Gross Power
59.5 hp
Operational Weight
7,200 lb
Pump Flow Capacity
20 gpm
Length With Bucket
11.65 ft
Width Over Tires
5.67 ft
HSL810
Gross Power
70 hp
Operational Weight
7,187 lb
Pump Flow Capacity
19.7 gpm
Length With Bucket
11.39 ft
Width Over Tires
5.62 ft
Hyundai HSL850-7
Gross Power
68 hp
Operational Weight
7,253 lb
Pump Flow Capacity
17.7 gpm
Length With Bucket
11.39 ft
Width Over Tires
6.01 ft
Hyundai HSL1200T
Gross Power
87.4 hp
Operational Weight
8,001 lb
Pump Flow Capacity
21.1 gpm
Length With Bucket
12.17 ft
Width Over Tires
5.9 ft
HSL1500T
Gross Power
87.4 hp
Operational Weight
8,175 lb
Pump Flow Capacity
21.1 gpm
Length With Bucket
12.17 ft
Width Over Tires
5.9 ft

Hyundai R16-7 to R36N-7

ModelSelected specifications
R16-7
Net Power
17 hp
Operating Weight
3,594 lb
Hydraulic Pump Flow Capacity
12.5 gpm
Shipping Length Of Unit
12.28 ft
Max Cutting Height
11.04 ft
R22-7
Net Power
17 hp
Operating Weight
4,850 lb
Hydraulic Pump Flow Capacity
16.8 gpm
Shipping Length Of Unit
13.37 ft
Max Cutting Height
12.29 ft
R36N-7
Net Power
27 hp
Operating Weight
7,981 lb
Hydraulic Pump Flow Capacity
28.9 gpm
Shipping Length Of Unit
15.38 ft
Max Cutting Height
15.29 ft

Hyundai R160LC-7 to R305LC-7

ModelSelected specifications
R160LC-7
Gross Power
126 hp
Operating Weight
38,361 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
28.15 ft
Shipping Height Of Unit
9.98 ft
Hyundai R160LCD-7
Gross Power
126 hp
Operating Weight
40,565 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
29.57 ft
Shipping Height Of Unit
9.72 ft
Hyundai R180LC-7
Gross Power
126 hp
Operating Weight
40,124 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
28.29 ft
Shipping Height Of Unit
9.72 ft
Hyundai R180LC-7A
Gross Power
126 hp
Operating Weight
40,124 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
28.29 ft
Shipping Height Of Unit
9.72 ft
Hyundai R180LCD-7
Gross Power
126 hp
Operating Weight
42,461 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
29.57 ft
Shipping Height Of Unit
9.72 ft
Hyundai R180LCD-7A
Gross Power
126 hp
Operating Weight
40,120 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Shipping Length Of Unit
29.57 ft
Shipping Height Of Unit
9.72 ft
Hyundai R210LC-7
Gross Power
150 hp
Operating Weight
47,800 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Shipping Length Of Unit
31.67 ft
Shipping Height Of Unit
10.5 ft
Hyundai R210LC-7 High Chassis
Gross Power
150 hp
Operating Weight
51,060 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Shipping Length Of Unit
31.63 ft
Shipping Height Of Unit
10.9 ft
Hyundai R210LC-7A
Gross Power
151 hp
Operating Weight
47,800 lb
Hydraulic Pump Flow Capacity
58.1 gpm
Shipping Length Of Unit
31.67 ft
Shipping Height Of Unit
10.5 ft
Hyundai R210LC-7A High Chassis
Gross Power
151 hp
Operating Weight
51,060 lb
Hydraulic Pump Flow Capacity
58.1 gpm
Shipping Length Of Unit
31.63 ft
Shipping Height Of Unit
10.9 ft
Hyundai R210NLC-7
Gross Power
150 hp
Operating Weight
54,000 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Shipping Length Of Unit
31.67 ft
Shipping Height Of Unit
10.67 ft
R250LC-7
Gross Power
173 hp
Operating Weight
55,600 lb
Hydraulic Pump Flow Capacity
118.4 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
R200W-3
Gross Power
167 hp
Operating Weight
44,203 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Height To Top Of Cab
10.37 ft
Ground Clearance
1.14 ft
R200W-7
Gross Power
166 hp
Operating Weight
45,195 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Height To Top Of Cab
10.44 ft
Ground Clearance
1.14 ft
R290LC-7 LR
Net Power
213 hp
Operating Weight
72,444 lb
Shipping Length Of Unit
47.74 ft
Shipping Height Of Unit
11.65 ft
Max Cutting Height
47.58 ft
R290LC-9
Gross Power
227 hp
Operating Weight
64,596 lb
Hydraulic Pump Flow Capacity
133.2 gpm
Shipping Length Of Unit
35.11 ft
Shipping Height Of Unit
11.78 ft
Hyundai R290NLC-7
Gross Power
213 hp
Operating Weight
64,150 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
35.11 ft
Shipping Height Of Unit
11.78 ft
Hyundai R290NLC-7A
Gross Power
227 hp
Operating Weight
64,150 lb
Hydraulic Pump Flow Capacity
133.2 gpm
Shipping Length Of Unit
35.11 ft
Shipping Height Of Unit
11.78 ft
R305LC-7
Net Power
255 hp
Operating Weight
64,816 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
34.65 ft
Shipping Height Of Unit
10.8 ft

Hyundai R250LC-7 High Chassis to R500LC-7A

ModelSelected specifications
R250LC-7 High Chassis
Gross Power
173 hp
Operating Weight
60,520 lb
Hydraulic Pump Flow Capacity
118.4 gpm
Shipping Length Of Unit
33.01 ft
Shipping Height Of Unit
11.85 ft
Hyundai R250LC-7A
Gross Power
176 hp
Operating Weight
55,600 lb
Hydraulic Pump Flow Capacity
59.2 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
R250LC-7A High Chassis
Gross Power
176 hp
Operating Weight
55,600 lb
Hydraulic Pump Flow Capacity
59.2 gpm
Shipping Length Of Unit
33.01 ft
Shipping Height Of Unit
11.85 ft
Hyundai R250LC-9
Gross Power
195 hp
Operating Weight
55,557 lb
Hydraulic Pump Flow Capacity
117.3 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
Hyundai R250NLC-7
Gross Power
173 hp
Operating Weight
55,300 lb
Hydraulic Pump Flow Capacity
118.4 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
Hyundai R260LC-9A
Gross Power
188 hp
Operating Weight
55,557 lb
Hydraulic Pump Flow Capacity
58.6 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
Hyundai R260LC-9A H/W
Gross Power
188 hp
Operating Weight
60,517 lb
Hydraulic Pump Flow Capacity
58.6 gpm
Shipping Length Of Unit
33.01 ft
Shipping Height Of Unit
11.85 ft
Hyundai R260NLC-9A
Gross Power
188 hp
Operating Weight
60,517 lb
Hydraulic Pump Flow Capacity
58.6 gpm
Shipping Length Of Unit
32.98 ft
Shipping Height Of Unit
11.59 ft
R290LC-7
Gross Power
213 hp
Operating Weight
64,600 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
35.11 ft
Shipping Height Of Unit
11.78 ft
R290LC-7 High Chassis
Gross Power
213 hp
Operating Weight
70,860 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
35.08 ft
Shipping Height Of Unit
12.28 ft
R290LC-7A
Gross Power
227 hp
Operating Weight
64,600 lb
Hydraulic Pump Flow Capacity
133.2 gpm
Shipping Length Of Unit
35.11 ft
Shipping Height Of Unit
11.78 ft
R290LC-7A High Chassis
Gross Power
227 hp
Operating Weight
70,860 lb
Hydraulic Pump Flow Capacity
133.2 gpm
Shipping Length Of Unit
35.08 ft
Shipping Height Of Unit
12.28 ft
R450-7
Gross Power
353 hp
Operating Weight
96,300 lb
Hydraulic Pump Flow Capacity
200.8 gpm
Shipping Length Of Unit
40.13 ft
Shipping Height Of Unit
12.54 ft
R450-7A
Gross Power
357 hp
Operating Weight
96,563 lb
Hydraulic Pump Flow Capacity
190.3 gpm
Shipping Length Of Unit
40.13 ft
Shipping Height Of Unit
12.54 ft
Hyundai R450LC-7
Gross Power
353 hp
Operating Weight
99,000 lb
Hydraulic Pump Flow Capacity
200.8 gpm
Shipping Length Of Unit
40.13 ft
Shipping Height Of Unit
12.54 ft
Hyundai R500LC-7
Gross Power
353 hp
Operating Weight
107,586 lb
Hydraulic Pump Flow Capacity
200.8 gpm
Shipping Length Of Unit
40.16 ft
Shipping Height Of Unit
13.03 ft
Hyundai R500LC-7A
Gross Power
357 hp
Operating Weight
107,580 lb
Hydraulic Pump Flow Capacity
190.3 gpm
Shipping Length Of Unit
40.16 ft
Shipping Height Of Unit
13.03 ft

Hyundai R320LC-7 to R800LC-7A

ModelSelected specifications
R320LC-7
Gross Power
259 hp
Operating Weight
70,989 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.85 ft
Shipping Height Of Unit
11.95 ft
R320LC-7 High Chassis
Gross Power
259 hp
Operating Weight
76,500 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.82 ft
Shipping Height Of Unit
12.28 ft
R320LC-7A
Gross Power
258 hp
Operating Weight
70,989 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.85 ft
Shipping Height Of Unit
11.85 ft
R320LC-7A High Chassis
Gross Power
258 hp
Operating Weight
76,500 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.82 ft
Shipping Height Of Unit
12.28 ft
R320NLC-7
Gross Power
259 hp
Operating Weight
70,548 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.85 ft
Shipping Height Of Unit
11.95 ft
R320NLC-7A
Gross Power
258 hp
Operating Weight
70,548 lb
Hydraulic Pump Flow Capacity
137.4 gpm
Shipping Length Of Unit
36.85 ft
Shipping Height Of Unit
11.95 ft
R360LC-7
Gross Power
280 hp
Operating Weight
79,587 lb
Hydraulic Pump Flow Capacity
153.3 gpm
Shipping Length Of Unit
36.88 ft
Shipping Height Of Unit
12.14 ft
R360LC-7A
Gross Power
296 hp
Operating Weight
79,587 lb
Hydraulic Pump Flow Capacity
152.2 gpm
Shipping Length Of Unit
36.88 ft
Shipping Height Of Unit
12.14 ft
R380LC-9
Gross Power
296 hp
Operating Weight
85,209 lb
Shipping Length Of Unit
36.88 ft
Shipping Height Of Unit
12.18 ft
Max Cutting Height
34.75 ft
R450LC-7A
Gross Power
357 hp
Operating Weight
99,700 lb
Hydraulic Pump Flow Capacity
190.3 gpm
Shipping Length Of Unit
40.13 ft
Shipping Height Of Unit
12.54 ft
R800LC-7A
Gross Power
510 hp
Operating Weight
181,485 lb
Hydraulic Pump Flow Capacity
266.3 gpm
Shipping Length Of Unit
42.98 ft
Shipping Height Of Unit
16.54 ft
Compare Hyundai R320LC-7, R320LC-7 High Chassis, R320LC-7A, R320LC-7A High Chassis, R320NLC-7, R320NLC-7A, R360LC-7, R360LC-7A, R380LC-9, R450LC-7A
Boom/Stick Option (Hex) 1
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Shipping Length Of Unit36.85 ft36.82 ft36.85 ft36.82 ft36.85 ft36.85 ft36.88 ft36.88 ft36.88 ft40.13 ft
Shipping Height Of Unit11.95 ft12.28 ft11.85 ft12.28 ft11.95 ft11.95 ft12.14 ft12.14 ft12.18 ft12.54 ft
Max Cutting Height33.54 ft34.45 ft33.54 ft34.45 ft33.54 ft33.54 ft34.36 ft34.36 ft34.75 ft34.78 ft
Max Loading Height23.13 ft24.05 ft23.13 ft24.05 ft23.13 ft23.13 ft23.86 ft23.86 ft24.18 ft23.59 ft
Max Reach Along Ground33.17 ft32.94 ft33.17 ft32.94 ft33.17 ft33.17 ft34.42 ft34.42 ft34.42 ft35.9 ft
Max Vertical Wall Digging Depth19.62 ft18.71 ft19.62 ft18.71 ft19.62 ft19.62 ft19.49 ft19.49 ft19.46 ft19.66 ft
Max Digging Depth20.9 ft20.02 ft20.9 ft20.02 ft20.9 ft20.9 ft22.31 ft22.31 ft22.38 ft22.35 ft
Dimensions and weight
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Ground Clearance1.65 ft2.51 ft1.65 ft2.51 ft1.65 ft1.65 ft1.81 ft1.81 ft1.81 ft1.83 ft
Height To Top Of Cab10.14 ft11.13 ft10.14 ft11.13 ft10.14 ft10.14 ft10.42 ft10.42 ft10.42 ft10.67 ft
Width To Outside Of Tracks10.77 ft11.39 ft10.77 ft11.39 ft9.81 ft9.81 ft10.96 ft10.96 ft11.29 ft10.96 ft
Length Of Track On Ground13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft14.24 ft14.24 ft14.24 ft13.26 ft
Tail Swing Radius10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft11.21 ft11.21 ft11.21 ft12.21 ft
Removal Counterweight Clearance3.94 ft4.93 ft3.94 ft4.93 ft3.94 ft3.94 ft4.24 ft4.24 ft4.24 ft4.4 ft
Undercarriage
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Track Gauge8.8 ft9.42 ft8.8 ft9.42 ft7.85 ft7.85 ft8.99 ft8.99 ft8.99 ft8.99 ft
Shoe Size23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in27.56 in23.63 in
Ground Pressure8.82 psi9.53 psi8.82 psi9.53 psi8.67 psi8.67 psi9.1 psi9.1 psi8.39 psi11.09 psi
Max Travel Speed3.36 mph3.36 mph3.3 mph3.3 mph3.36 mph3.3 mph2.8 mph2.99 mph2.99 mph3.11 mph
Number Of Track Rollers Per Side9999999999
Number Of Shoes Per Side48484848484851515153
Number Of Carrier Rollers Per Side2222222222
Engine
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Engine ModelC8.3-CC8.3-CQSCQSCC8.3-CQSCQSC8.3CQSLQSLQSM11
Gross Power259 hp259 hp258 hp258 hp259 hp258 hp280 hp296 hp296 hp357 hp
Net Power232 hp232 hp237 hp237 hp232 hp237 hp261 hp271 hp271 hp320 hp
Power Measured @1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,900 rpm1,850 rpm1,850 rpm1,900 rpm
Max Torque899 lb-ft899 lb-ft830 lb-ft830 lb-ft899 lb-ft830 lb-ft870 lb-ft1,000 lb-ft1,070 lb-ft1,234 lb-ft
Displacement506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in540 cu in540 cu in659 cu in
AspirationturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedTurbochargedturbocharged
Torque Measured @1,300 rpm1,300 rpm1,500 rpm1,500 rpm1,300 rpm1,500 rpm1,400 rpm1,400 rpm1,400 rpm1,400 rpm
Operational
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Operating Weight70,989 lb76,500 lb70,989 lb76,500 lb70,548 lb70,548 lb79,587 lb79,587 lb85,209 lb99,700 lb
Fuel Capacity126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal137.4 gal137.4 gal145.3 gal161.2 gal
Cooling System Fluid Capacity11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal13.3 gal
Hydraulic System Fluid Capacity84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal100.4 gal100.4 gal108.4 gal100.4 gal
Operating Voltage24 V24 V24 V24 V24 V24 V24 V24 V24 V24 V
Engine Oil Capacity6.8 gal6.8 gal9.3 gal9.3 gal6.8 gal9.3 gal7.1 gal8.4 gal8.9 gal10.1 gal
Swing Drive Fluid Capacity3 gal3 gal3 gal3 gal3 gal3 gal2.2 gal2.2 gal2.2 gal1.4 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps
Hydraulic System Relief Valve Pressure4,690 psi4,690 psi5,120 psi5,120 psi4,690 psi5,120 psi4,690 psi5,120 psi4,765 psi5,120 psi
Swing Mechanism
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Swing Speed9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9 rpm9.3 rpm9 rpm
Buckets
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Reference Bucket Capacity1.9 yd31.9 yd31.9 yd31.9 yd31.9 yd31.9 yd32.2 yd32.2 yd32.2 yd32.9 yd3
Minimum Bucket Capacity1.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.6 yd31.6 yd32 yd31.9 yd3
Maximum Bucket Capacity2.8 yd32.8 yd32.8 yd32.8 yd32.8 yd32.8 yd33.1 yd33.1 yd32.8 yd34.2 yd3
Compare configurations
Boom/Stick Option (Hex) 1
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Shipping Length Of Unit36.85 ft36.82 ft36.85 ft36.82 ft36.85 ft36.85 ft36.88 ft36.88 ft36.88 ft40.13 ft
Shipping Height Of Unit11.95 ft12.28 ft11.85 ft12.28 ft11.95 ft11.95 ft12.14 ft12.14 ft12.18 ft12.54 ft
Max Cutting Height33.54 ft34.45 ft33.54 ft34.45 ft33.54 ft33.54 ft34.36 ft34.36 ft34.75 ft34.78 ft
Max Loading Height23.13 ft24.05 ft23.13 ft24.05 ft23.13 ft23.13 ft23.86 ft23.86 ft24.18 ft23.59 ft
Max Reach Along Ground33.17 ft32.94 ft33.17 ft32.94 ft33.17 ft33.17 ft34.42 ft34.42 ft34.42 ft35.9 ft
Max Vertical Wall Digging Depth19.62 ft18.71 ft19.62 ft18.71 ft19.62 ft19.62 ft19.49 ft19.49 ft19.46 ft19.66 ft
Max Digging Depth20.9 ft20.02 ft20.9 ft20.02 ft20.9 ft20.9 ft22.31 ft22.31 ft22.38 ft22.35 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21'4" (6500mm) / Stick 8'2" (2500mm)Boom 23'2" (7060mm)/Stick 7'10" (2400mm)
Dimensions and weight
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Ground Clearance1.65 ft2.51 ft1.65 ft2.51 ft1.65 ft1.65 ft1.81 ft1.81 ft1.81 ft1.83 ft
Height To Top Of Cab10.14 ft11.13 ft10.14 ft11.13 ft10.14 ft10.14 ft10.42 ft10.42 ft10.42 ft10.67 ft
Width To Outside Of Tracks10.77 ft11.39 ft10.77 ft11.39 ft9.81 ft9.81 ft10.96 ft10.96 ft11.29 ft10.96 ft
Length Of Track On Ground13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft14.24 ft14.24 ft14.24 ft13.26 ft
Tail Swing Radius10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft11.21 ft11.21 ft11.21 ft12.21 ft
Removal Counterweight Clearance3.94 ft4.93 ft3.94 ft4.93 ft3.94 ft3.94 ft4.24 ft4.24 ft4.24 ft4.4 ft
Undercarriage
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Track Gauge8.8 ft9.42 ft8.8 ft9.42 ft7.85 ft7.85 ft8.99 ft8.99 ft8.99 ft8.99 ft
Shoe Size23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in27.56 in23.63 in
Ground Pressure8.82 psi9.53 psi8.82 psi9.53 psi8.67 psi8.67 psi9.1 psi9.1 psi8.39 psi11.09 psi
Max Travel Speed3.36 mph3.36 mph3.3 mph3.3 mph3.36 mph3.3 mph2.8 mph2.99 mph2.99 mph3.11 mph
Number Of Track Rollers Per Side9999999999
Number Of Shoes Per Side48484848484851515153
Number Of Carrier Rollers Per Side2222222222
Engine
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Engine ModelC8.3-CC8.3-CQSCQSCC8.3-CQSCQSC8.3CQSLQSLQSM11
Gross Power259 hp259 hp258 hp258 hp259 hp258 hp280 hp296 hp296 hp357 hp
Net Power232 hp232 hp237 hp237 hp232 hp237 hp261 hp271 hp271 hp320 hp
Power Measured @1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,900 rpm1,850 rpm1,850 rpm1,900 rpm
Max Torque899 lb-ft899 lb-ft830 lb-ft830 lb-ft899 lb-ft830 lb-ft870 lb-ft1,000 lb-ft1,070 lb-ft1,234 lb-ft
Displacement506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in540 cu in540 cu in659 cu in
AspirationturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedTurbochargedturbocharged
Torque Measured @1,300 rpm1,300 rpm1,500 rpm1,500 rpm1,300 rpm1,500 rpm1,400 rpm1,400 rpm1,400 rpm1,400 rpm
Operational
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Operating Weight70,989 lb76,500 lb70,989 lb76,500 lb70,548 lb70,548 lb79,587 lb79,587 lb85,209 lb99,700 lb
Fuel Capacity126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal137.4 gal137.4 gal145.3 gal161.2 gal
Cooling System Fluid Capacity11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal13.3 gal
Hydraulic System Fluid Capacity84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal100.4 gal100.4 gal108.4 gal100.4 gal
Operating Voltage24 V24 V24 V24 V24 V24 V24 V24 V24 V24 V
Engine Oil Capacity6.8 gal6.8 gal9.3 gal9.3 gal6.8 gal9.3 gal7.1 gal8.4 gal8.9 gal10.1 gal
Swing Drive Fluid Capacity3 gal3 gal3 gal3 gal3 gal3 gal2.2 gal2.2 gal2.2 gal1.4 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps
Hydraulic System Relief Valve Pressure4,690 psi4,690 psi5,120 psi5,120 psi4,690 psi5,120 psi4,690 psi5,120 psi4,765 psi5,120 psi
Swing Mechanism
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Swing Speed9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9 rpm9.3 rpm9 rpm
Buckets
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Reference Bucket Capacity1.9 yd31.9 yd31.9 yd31.9 yd31.9 yd31.9 yd32.2 yd32.2 yd32.2 yd32.9 yd3
Minimum Bucket Capacity1.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.6 yd31.6 yd32 yd31.9 yd3
Maximum Bucket Capacity2.8 yd32.8 yd32.8 yd32.8 yd32.8 yd32.8 yd33.1 yd33.1 yd32.8 yd34.2 yd3
R320LC-7
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.85 ft
Shipping Height Of Unit11.95 ft
Max Cutting Height33.54 ft
Max Loading Height23.13 ft
Max Reach Along Ground33.17 ft
Max Vertical Wall Digging Depth19.62 ft
Max Digging Depth20.9 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance1.65 ft
Height To Top Of Cab10.14 ft
Width To Outside Of Tracks10.77 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance3.94 ft
Undercarriage
Track Gauge8.8 ft
Shoe Size23.63 in
Ground Pressure8.82 psi
Max Travel Speed3.36 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelC8.3-C
Gross Power259 hp
Net Power232 hp
Power Measured @1,750 rpm
Max Torque899 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,300 rpm
Operational
Operating Weight70,989 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity6.8 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,690 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R320LC-7 High Chassis
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.82 ft
Shipping Height Of Unit12.28 ft
Max Cutting Height34.45 ft
Max Loading Height24.05 ft
Max Reach Along Ground32.94 ft
Max Vertical Wall Digging Depth18.71 ft
Max Digging Depth20.02 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance2.51 ft
Height To Top Of Cab11.13 ft
Width To Outside Of Tracks11.39 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance4.93 ft
Undercarriage
Track Gauge9.42 ft
Shoe Size23.63 in
Ground Pressure9.53 psi
Max Travel Speed3.36 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelC8.3-C
Gross Power259 hp
Net Power232 hp
Power Measured @1,750 rpm
Max Torque899 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,300 rpm
Operational
Operating Weight76,500 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity6.8 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,690 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R320LC-7A
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.85 ft
Shipping Height Of Unit11.85 ft
Max Cutting Height33.54 ft
Max Loading Height23.13 ft
Max Reach Along Ground33.17 ft
Max Vertical Wall Digging Depth19.62 ft
Max Digging Depth20.9 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance1.65 ft
Height To Top Of Cab10.14 ft
Width To Outside Of Tracks10.77 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance3.94 ft
Undercarriage
Track Gauge8.8 ft
Shoe Size23.63 in
Ground Pressure8.82 psi
Max Travel Speed3.3 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSC
Gross Power258 hp
Net Power237 hp
Power Measured @1,750 rpm
Max Torque830 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight70,989 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity9.3 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure5,120 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R320LC-7A High Chassis
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.82 ft
Shipping Height Of Unit12.28 ft
Max Cutting Height34.45 ft
Max Loading Height24.05 ft
Max Reach Along Ground32.94 ft
Max Vertical Wall Digging Depth18.71 ft
Max Digging Depth20.02 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance2.51 ft
Height To Top Of Cab11.13 ft
Width To Outside Of Tracks11.39 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance4.93 ft
Undercarriage
Track Gauge9.42 ft
Shoe Size23.63 in
Ground Pressure9.53 psi
Max Travel Speed3.3 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSC
Gross Power258 hp
Net Power237 hp
Power Measured @1,750 rpm
Max Torque830 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight76,500 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity9.3 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure5,120 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R320NLC-7
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.85 ft
Shipping Height Of Unit11.95 ft
Max Cutting Height33.54 ft
Max Loading Height23.13 ft
Max Reach Along Ground33.17 ft
Max Vertical Wall Digging Depth19.62 ft
Max Digging Depth20.9 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance1.65 ft
Height To Top Of Cab10.14 ft
Width To Outside Of Tracks9.81 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance3.94 ft
Undercarriage
Track Gauge7.85 ft
Shoe Size23.63 in
Ground Pressure8.67 psi
Max Travel Speed3.36 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelC8.3-C
Gross Power259 hp
Net Power232 hp
Power Measured @1,750 rpm
Max Torque899 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,300 rpm
Operational
Operating Weight70,548 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity6.8 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,690 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R320NLC-7A
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.85 ft
Shipping Height Of Unit11.95 ft
Max Cutting Height33.54 ft
Max Loading Height23.13 ft
Max Reach Along Ground33.17 ft
Max Vertical Wall Digging Depth19.62 ft
Max Digging Depth20.9 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)
Dimensions and weight
Ground Clearance1.65 ft
Height To Top Of Cab10.14 ft
Width To Outside Of Tracks9.81 ft
Length Of Track On Ground13.23 ft
Tail Swing Radius10.93 ft
Removal Counterweight Clearance3.94 ft
Undercarriage
Track Gauge7.85 ft
Shoe Size23.63 in
Ground Pressure8.67 psi
Max Travel Speed3.3 mph
Drawbar Pull62,830 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side48
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSC
Gross Power258 hp
Net Power237 hp
Power Measured @1,750 rpm
Max Torque830 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight70,548 lb
Fuel Capacity126.9 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity84.6 gal
Operating Voltage24 V
Engine Oil Capacity9.3 gal
Swing Drive Fluid Capacity3 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure5,120 psi
Hydraulic Pump Flow Capacity137.4 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity1.2 yd3
Maximum Bucket Capacity2.8 yd3

Source: RitchieSpecs

R360LC-7
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.88 ft
Shipping Height Of Unit12.14 ft
Max Cutting Height34.36 ft
Max Loading Height23.86 ft
Max Reach Along Ground34.42 ft
Max Vertical Wall Digging Depth19.49 ft
Max Digging Depth22.31 ft
Boom/Stick Option (Hex) 1Boom 21'4" (6500mm)/Stick 8'2" (2500mm)
Dimensions and weight
Ground Clearance1.81 ft
Height To Top Of Cab10.42 ft
Width To Outside Of Tracks10.96 ft
Length Of Track On Ground14.24 ft
Tail Swing Radius11.21 ft
Removal Counterweight Clearance4.24 ft
Undercarriage
Track Gauge8.99 ft
Shoe Size23.63 in
Ground Pressure9.1 psi
Max Travel Speed2.8 mph
Drawbar Pull68,350 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSC8.3C
Gross Power280 hp
Net Power261 hp
Power Measured @1,900 rpm
Max Torque870 lb-ft
Displacement506 cu in
Aspirationturbocharged
Torque Measured @1,400 rpm
Operational
Operating Weight79,587 lb
Fuel Capacity137.4 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity100.4 gal
Operating Voltage24 V
Engine Oil Capacity7.1 gal
Swing Drive Fluid Capacity2.2 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,690 psi
Hydraulic Pump Flow Capacity153.3 gpm
Swing Mechanism
Swing Speed9.1 rpm
Buckets
Reference Bucket Capacity2.2 yd3
Minimum Bucket Capacity1.6 yd3
Maximum Bucket Capacity3.1 yd3

Source: RitchieSpecs

R360LC-7A
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.88 ft
Shipping Height Of Unit12.14 ft
Max Cutting Height34.36 ft
Max Loading Height23.86 ft
Max Reach Along Ground34.42 ft
Max Vertical Wall Digging Depth19.49 ft
Max Digging Depth22.31 ft
Boom/Stick Option (Hex) 1Boom 21'4" (6500mm)/Stick 8'2" (2500mm)
Dimensions and weight
Ground Clearance1.81 ft
Height To Top Of Cab10.42 ft
Width To Outside Of Tracks10.96 ft
Length Of Track On Ground14.24 ft
Tail Swing Radius11.21 ft
Removal Counterweight Clearance4.24 ft
Undercarriage
Track Gauge8.99 ft
Shoe Size23.63 in
Ground Pressure9.1 psi
Max Travel Speed2.99 mph
Drawbar Pull68,350 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSL
Gross Power296 hp
Net Power271 hp
Power Measured @1,850 rpm
Max Torque1,000 lb-ft
Displacement540 cu in
Aspirationturbocharged
Torque Measured @1,400 rpm
Operational
Operating Weight79,587 lb
Fuel Capacity137.4 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity100.4 gal
Operating Voltage24 V
Engine Oil Capacity8.4 gal
Swing Drive Fluid Capacity2.2 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure5,120 psi
Hydraulic Pump Flow Capacity152.2 gpm
Swing Mechanism
Swing Speed9 rpm
Buckets
Reference Bucket Capacity2.2 yd3
Minimum Bucket Capacity1.6 yd3
Maximum Bucket Capacity3.1 yd3

Source: RitchieSpecs

R380LC-9
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.88 ft
Shipping Height Of Unit12.18 ft
Max Cutting Height34.75 ft
Max Loading Height24.18 ft
Max Reach Along Ground34.42 ft
Max Vertical Wall Digging Depth19.46 ft
Max Digging Depth22.38 ft
Boom/Stick Option (Hex) 1Boom 21'4" (6500mm) / Stick 8'2" (2500mm)
Dimensions and weight
Ground Clearance1.81 ft
Height To Top Of Cab10.42 ft
Width To Outside Of Tracks11.29 ft
Length Of Track On Ground14.24 ft
Tail Swing Radius11.21 ft
Removal Counterweight Clearance4.24 ft
Undercarriage
Track Gauge8.99 ft
Shoe Size27.56 in
Ground Pressure8.39 psi
Max Travel Speed2.99 mph
Number Of Track Rollers Per Side9
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Engine
Engine ModelQSL
Gross Power296 hp
Net Power271 hp
Power Measured @1,850 rpm
Max Torque1,070 lb-ft
Displacement540 cu in
AspirationTurbocharged
Torque Measured @1,400 rpm
Operational
Operating Weight85,209 lb
Fuel Capacity145.3 gal
Cooling System Fluid Capacity11.9 gal
Hydraulic System Fluid Capacity108.4 gal
Operating Voltage24 V
Engine Oil Capacity8.9 gal
Swing Drive Fluid Capacity2.2 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,765 psi
Swing Mechanism
Swing Speed9.3 rpm
Buckets
Reference Bucket Capacity2.2 yd3
Minimum Bucket Capacity2 yd3
Maximum Bucket Capacity2.8 yd3
Additional specifications
Main pumps — HE 8.9 manufacturer configuration, November 2019 Rev.82 × 288.8 L/min [source]

Source: RitchieSpecs

R450LC-7A
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit40.13 ft
Shipping Height Of Unit12.54 ft
Max Cutting Height34.78 ft
Max Loading Height23.59 ft
Max Reach Along Ground35.9 ft
Max Vertical Wall Digging Depth19.66 ft
Max Digging Depth22.35 ft
Boom/Stick Option (Hex) 1Boom 23'2" (7060mm)/Stick 7'10" (2400mm)
Dimensions and weight
Ground Clearance1.83 ft
Height To Top Of Cab10.67 ft
Width To Outside Of Tracks10.96 ft
Length Of Track On Ground13.26 ft
Tail Swing Radius12.21 ft
Removal Counterweight Clearance4.4 ft
Undercarriage
Track Gauge8.99 ft
Shoe Size23.63 in
Ground Pressure11.09 psi
Max Travel Speed3.11 mph
Drawbar Pull84,800 lb
Number Of Track Rollers Per Side9
Number Of Shoes Per Side53
Number Of Carrier Rollers Per Side2
Engine
Number Of Cylinders6
Engine ModelQSM11
Gross Power357 hp
Net Power320 hp
Power Measured @1,900 rpm
Max Torque1,234 lb-ft
Displacement659 cu in
Aspirationturbocharged
Torque Measured @1,400 rpm
Operational
Operating Weight99,700 lb
Fuel Capacity161.2 gal
Cooling System Fluid Capacity13.3 gal
Hydraulic System Fluid Capacity100.4 gal
Operating Voltage24 V
Engine Oil Capacity10.1 gal
Swing Drive Fluid Capacity1.4 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure5,120 psi
Hydraulic Pump Flow Capacity190.3 gpm
Swing Mechanism
Swing Speed9 rpm
Buckets
Reference Bucket Capacity2.9 yd3
Minimum Bucket Capacity1.9 yd3
Maximum Bucket Capacity4.2 yd3

Source: RitchieSpecs

Machine models

Hyundai R320LC-7 to R450LC-7A specifications

Entries in this reference
Listing-entry count
10
Short answer

The Hyundai R320LC-7 to R450LC-7A are closely matched full-size excavators that Hyundai lists separately, rated 232 hp to 320 hp across the 10 versions, in 10 versions: R320LC-7, R320LC-7 High Chassis, R320LC-7A, R320LC-7A High Chassis, R320NLC-7, R320NLC-7A, and 4 more. Listed weight is 70,548 lb to 99,700 lb across the 10 versions.

R320LC-7 to R450LC-7A specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
HyundaiR320LC-7 to R450LC-7A10R320LC-7, R320LC-7 High Chassis, R320LC-7A, R320LC-7A High Chassis, R320NLC-7, R320NLC-7A, and 4 more
Boom/Stick Option (Hex) 1
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Shipping Length Of Unit36.85 ft36.82 ft36.85 ft36.82 ft36.85 ft36.85 ft36.88 ft36.88 ft36.88 ft40.13 ft
Shipping Height Of Unit11.95 ft12.28 ft11.85 ft12.28 ft11.95 ft11.95 ft12.14 ft12.14 ft12.18 ft12.54 ft
Max Cutting Height33.54 ft34.45 ft33.54 ft34.45 ft33.54 ft33.54 ft34.36 ft34.36 ft34.75 ft34.78 ft
Max Loading Height23.13 ft24.05 ft23.13 ft24.05 ft23.13 ft23.13 ft23.86 ft23.86 ft24.18 ft23.59 ft
Max Reach Along Ground33.17 ft32.94 ft33.17 ft32.94 ft33.17 ft33.17 ft34.42 ft34.42 ft34.42 ft35.9 ft
Max Vertical Wall Digging Depth19.62 ft18.71 ft19.62 ft18.71 ft19.62 ft19.62 ft19.49 ft19.49 ft19.46 ft19.66 ft
Max Digging Depth20.9 ft20.02 ft20.9 ft20.02 ft20.9 ft20.9 ft22.31 ft22.31 ft22.38 ft22.35 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21\'4\" (6500mm) / Stick 8\'2\" (2500mm)Boom 23'2" (7060mm)/Stick 7'10" (2400mm)
Dimensions and weight
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Ground Clearance1.65 ft2.51 ft1.65 ft2.51 ft1.65 ft1.65 ft1.81 ft1.81 ft1.81 ft1.83 ft
Height To Top Of Cab10.14 ft11.13 ft10.14 ft11.13 ft10.14 ft10.14 ft10.42 ft10.42 ft10.42 ft10.67 ft
Width To Outside Of Tracks10.77 ft11.39 ft10.77 ft11.39 ft9.81 ft9.81 ft10.96 ft10.96 ft11.29 ft10.96 ft
Length Of Track On Ground13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft14.24 ft14.24 ft14.24 ft13.26 ft
Tail Swing Radius10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft11.21 ft11.21 ft11.21 ft12.21 ft
Removal Counterweight Clearance3.94 ft4.93 ft3.94 ft4.93 ft3.94 ft3.94 ft4.24 ft4.24 ft4.24 ft4.4 ft
Undercarriage
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Track Gauge8.8 ft9.42 ft8.8 ft9.42 ft7.85 ft7.85 ft8.99 ft8.99 ft8.99 ft8.99 ft
Shoe Size23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in27.56 in23.63 in
Ground Pressure8.82 psi9.53 psi8.82 psi9.53 psi8.67 psi8.67 psi9.1 psi9.1 psi8.39 psi11.09 psi
Max Travel Speed3.36 mph3.36 mph3.3 mph3.3 mph3.36 mph3.3 mph2.8 mph2.99 mph2.99 mph3.11 mph
Number Of Track Rollers Per Side9999999999
Number Of Shoes Per Side48484848484851515153
Number Of Carrier Rollers Per Side2222222222
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR450LC-7A
Drawbar Pull62,830 lb62,830 lb62,830 lb62,830 lb62,830 lb62,830 lb68,350 lb68,350 lb84,800 lb
Engine
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR450LC-7A
Number Of Cylinders666666666
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Engine ModelC8.3-CC8.3-CQSCQSCC8.3-CQSCQSC8.3CQSLQSLQSM11
Gross Power259 hp259 hp258 hp258 hp259 hp258 hp280 hp296 hp296 hp357 hp
Net Power232 hp232 hp237 hp237 hp232 hp237 hp261 hp271 hp271 hp320 hp
Power Measured @1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,900 rpm1,850 rpm1,850 rpm1,900 rpm
Max Torque899 lb-ft899 lb-ft830 lb-ft830 lb-ft899 lb-ft830 lb-ft870 lb-ft1,000 lb-ft1,070 lb-ft1,234 lb-ft
Displacement506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in540 cu in540 cu in659 cu in
AspirationturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedTurbochargedturbocharged
Torque Measured @1,300 rpm1,300 rpm1,500 rpm1,500 rpm1,300 rpm1,500 rpm1,400 rpm1,400 rpm1,400 rpm1,400 rpm
Operational
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Operating Weight70,989 lb76,500 lb70,989 lb76,500 lb70,548 lb70,548 lb79,587 lb79,587 lb85,209 lb99,700 lb
Fuel Capacity126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal137.4 gal137.4 gal145.3 gal161.2 gal
Cooling System Fluid Capacity11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal13.3 gal
Hydraulic System Fluid Capacity84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal100.4 gal100.4 gal108.4 gal100.4 gal
Operating Voltage24 V24 V24 V24 V24 V24 V24 V24 V24 V24 V
Engine Oil Capacity6.8 gal6.8 gal9.3 gal9.3 gal6.8 gal9.3 gal7.1 gal8.4 gal8.9 gal10.1 gal
Swing Drive Fluid Capacity3 gal3 gal3 gal3 gal3 gal3 gal2.2 gal2.2 gal2.2 gal1.4 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps50 amps
Hydraulic System Relief Valve Pressure4,690 psi4,690 psi5,120 psi5,120 psi4,690 psi5,120 psi4,690 psi5,120 psi4,765 psi5,120 psi
Hydraulic Pump Flow Capacity137.4 gpm137.4 gpm137.4 gpm137.4 gpm137.4 gpm137.4 gpm153.3 gpm152.2 gpm576 gpm — reference unit rejected; see discrepancy190.3 gpm
Swing Mechanism
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Swing Speed9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9 rpm9.3 rpm9 rpm
Buckets
SpecificationR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Reference Bucket Capacity1.9 yd31.9 yd31.9 yd31.9 yd31.9 yd31.9 yd32.2 yd32.2 yd32.2 yd32.9 yd3
Minimum Bucket Capacity1.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.6 yd31.6 yd32 yd31.9 yd3
Maximum Bucket Capacity2.8 yd32.8 yd32.8 yd32.8 yd32.8 yd32.8 yd33.1 yd33.1 yd32.8 yd34.2 yd3
Variants — Source comparison annotation
Source guideDiffering-field count reported
R320LC-7 to R450LC-7A41
What changesR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Shipping Length Of Unit36.85 ft36.82 ft36.85 ft36.82 ft36.85 ft36.85 ft36.88 ft36.88 ft36.88 ft40.13 ft
Shipping Height Of Unit11.95 ft12.28 ft11.85 ft12.28 ft11.95 ft11.95 ft12.14 ft12.14 ft12.18 ft12.54 ft
Max Cutting Height33.54 ft34.45 ft33.54 ft34.45 ft33.54 ft33.54 ft34.36 ft34.36 ft34.75 ft34.78 ft
Max Loading Height23.13 ft24.05 ft23.13 ft24.05 ft23.13 ft23.13 ft23.86 ft23.86 ft24.18 ft23.59 ft
Max Reach Along Ground33.17 ft32.94 ft33.17 ft32.94 ft33.17 ft33.17 ft34.42 ft34.42 ft34.42 ft35.9 ft
Max Vertical Wall Digging Depth19.62 ft18.71 ft19.62 ft18.71 ft19.62 ft19.62 ft19.49 ft19.49 ft19.46 ft19.66 ft
Max Digging Depth20.9 ft20.02 ft20.9 ft20.02 ft20.9 ft20.9 ft22.31 ft22.31 ft22.38 ft22.35 ft
Boom/Stick Option (Hex) 1Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'2" (6450mm)/Stick 7'3" (2200mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21'4" (6500mm)/Stick 8'2" (2500mm)Boom 21\'4\" (6500mm) / Stick 8\'2\" (2500mm)Boom 23'2" (7060mm)/Stick 7'10" (2400mm)
Ground Clearance1.65 ft2.51 ft1.65 ft2.51 ft1.65 ft1.65 ft1.81 ft1.81 ft1.81 ft1.83 ft
Height To Top Of Cab10.14 ft11.13 ft10.14 ft11.13 ft10.14 ft10.14 ft10.42 ft10.42 ft10.42 ft10.67 ft
Width To Outside Of Tracks10.77 ft11.39 ft10.77 ft11.39 ft9.81 ft9.81 ft10.96 ft10.96 ft11.29 ft10.96 ft
Length Of Track On Ground13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft13.23 ft14.24 ft14.24 ft14.24 ft13.26 ft
Tail Swing Radius10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft10.93 ft11.21 ft11.21 ft11.21 ft12.21 ft
Removal Counterweight Clearance3.94 ft4.93 ft3.94 ft4.93 ft3.94 ft3.94 ft4.24 ft4.24 ft4.24 ft4.4 ft
Track Gauge8.8 ft9.42 ft8.8 ft9.42 ft7.85 ft7.85 ft8.99 ft8.99 ft8.99 ft8.99 ft
Shoe Size23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in23.63 in27.56 in23.63 in
Ground Pressure8.82 psi9.53 psi8.82 psi9.53 psi8.67 psi8.67 psi9.1 psi9.1 psi8.39 psi11.09 psi
Max Travel Speed3.36 mph3.36 mph3.3 mph3.3 mph3.36 mph3.3 mph2.8 mph2.99 mph2.99 mph3.11 mph
Number Of Shoes Per Side48484848484851515153
Engine ModelC8.3-CC8.3-CQSCQSCC8.3-CQSCQSC8.3CQSLQSLQSM11
Gross Power259 hp259 hp258 hp258 hp259 hp258 hp280 hp296 hp296 hp357 hp
Net Power232 hp232 hp237 hp237 hp232 hp237 hp261 hp271 hp271 hp320 hp
Power Measured @1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,750 rpm1,900 rpm1,850 rpm1,850 rpm1,900 rpm
Max Torque899 lb-ft899 lb-ft830 lb-ft830 lb-ft899 lb-ft830 lb-ft870 lb-ft1,000 lb-ft1,070 lb-ft1,234 lb-ft
Displacement506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in506 cu in540 cu in540 cu in659 cu in
AspirationturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedturbochargedTurbochargedturbocharged
Torque Measured @1,300 rpm1,300 rpm1,500 rpm1,500 rpm1,300 rpm1,500 rpm1,400 rpm1,400 rpm1,400 rpm1,400 rpm
Operating Weight70,989 lb76,500 lb70,989 lb76,500 lb70,548 lb70,548 lb79,587 lb79,587 lb85,209 lb99,700 lb
Fuel Capacity126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal126.9 gal137.4 gal137.4 gal145.3 gal161.2 gal
Cooling System Fluid Capacity11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal11.9 gal13.3 gal
Hydraulic System Fluid Capacity84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal84.6 gal100.4 gal100.4 gal108.4 gal100.4 gal
Engine Oil Capacity6.8 gal6.8 gal9.3 gal9.3 gal6.8 gal9.3 gal7.1 gal8.4 gal8.9 gal10.1 gal
Swing Drive Fluid Capacity3 gal3 gal3 gal3 gal3 gal3 gal2.2 gal2.2 gal2.2 gal1.4 gal
Hydraulic System Relief Valve Pressure4,690 psi4,690 psi5,120 psi5,120 psi4,690 psi5,120 psi4,690 psi5,120 psi4,765 psi5,120 psi
Hydraulic Pump Flow Capacity137.4 gpm137.4 gpm137.4 gpm137.4 gpm137.4 gpm137.4 gpm153.3 gpm152.2 gpm576 gpm — reference unit rejected; see discrepancy190.3 gpm
Swing Speed9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9.1 rpm9 rpm9.3 rpm9 rpm
Reference Bucket Capacity1.9 yd31.9 yd31.9 yd31.9 yd31.9 yd31.9 yd32.2 yd32.2 yd32.2 yd32.9 yd3
Minimum Bucket Capacity1.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.2 yd31.6 yd31.6 yd32 yd31.9 yd3
Maximum Bucket Capacity2.8 yd32.8 yd32.8 yd32.8 yd32.8 yd32.8 yd33.1 yd33.1 yd32.8 yd34.2 yd3
What changesR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR450LC-7A
Drawbar Pull62,830 lb62,830 lb62,830 lb62,830 lb62,830 lb62,830 lb68,350 lb68,350 lb84,800 lb
Number Of Cylinders666666666
Ratios
FigureR320LC-7R320LC-7 High ChassisR320LC-7AR320LC-7A High ChassisR320NLC-7R320NLC-7AR360LC-7R360LC-7AR380LC-9R450LC-7A
Engine horsepower per 1,000 lb of weight3.33.03.33.13.33.43.33.43.23.2
Fuel tank per engine horsepower0.55 gal0.55 gal0.54 gal0.54 gal0.55 gal0.54 gal0.53 gal0.51 gal0.54 gal0.50 gal
Theoretical flow × pressure arithmetic, not simultaneous hydraulic output376.0 hp376.0 hp410.4 hp410.4 hp376.0 hp410.4 hp419.5 hp454.6 hp1,601.3 hp — rejected input calculation568.5 hp

full-size excavator

Hyundai's listing for the R320LC-7 to R450LC-7A matches a full-size excavator; see the excavators page.

R320LC-7 to R450LC-7A: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumsfull-size excavatorHyundai and the R320NLC line that the R320NLC-7, R320NLC-7A belongs to (no title names the exact model). That is too few titles to say what owners mostly ask about, so the most recent are listed instead2
R320LC-7 to R450LC-7A: dated market and recall observations — Dated listing search
DateListing indexEquipment classNames queriedResult
2026-09-24MachineryTrader (machinerytrader.com)full-size excavatorR320LC-7, R320LC-7 High Chassis, R320LC-7ANo matching offers in this snapshot
Dated CPSC search
DateDatabaseNames queriedResult
2026-09-24U.S. Consumer Product Safety CommissionHyundai; R320LC-7, R320LC-7 High Chassis, R320LC-7ANo matching recall in the stated search

Documents

R380LC-9 flow has a unit conflict in the reference

The historical reference labels the R380LC-9 pump flow as 576 gpm. That entry is not a verified US-gallon flow rating and must not be used to select an attachment. Hyundai's November 2019 HE 8.9 brochure specifies two variable-displacement pumps at 2 × 288.8 L/min.

Its engine and publication scope are retained here rather than silently treating every historical R380LC-9 as that configuration.

The old 1,601.3 hp calculation used the disputed flow label and is rejected as an output estimate. Multiplying separately listed flow and relief-pressure maxima does not establish simultaneous hydraulic output. The pump-control description in the Hyundai service manual explains that the regulator reduces delivery as pressure rises to limit input torque.

Engine power and theoretical hydraulic arithmetic must therefore remain separate.

Source: Hyundai R380LC-9 brochure, November 2019 Rev.8, specifications page; Source: Hyundai R380LC-9 service manual, pump total-horsepower control
Manufacturer flow with its configuration scope
Machine and publicationMain pumpsPublished rated flow
R380LC-9, HE 8.9, November 2019 Rev.8Variable-displacement piston pumps2 × 288.8 L/min

Hyundai R35Z-7

ModelSelected specifications
R35Z-7
Gross Power
27.3 hp
Operating Weight
8,047 lb
Hydraulic Pump Flow Capacity
20.4 gpm
Shipping Length Of Unit
15.72 ft
Max Cutting Height
15.85 ft

Hyundai R55-7 and R55W-7

ModelSelected specifications
R55-7
Gross Power
53 hp
Operating Weight
12,570 lb
Hydraulic Pump Flow Capacity
29.1 gpm
Max Cutting Height
18.97 ft
Max Loading Height
13.29 ft
R55W-7
Gross Power
57 hp
Operating Weight
12,015 lb
Hydraulic Pump Flow Capacity
31.8 gpm
Height To Top Of Cab
9.36 ft
Ground Clearance
0.96 ft

Hyundai R75-7 and 18 related models

ModelSelected specifications
R75-7
Net Power
55.5 hp
Operating Weight
16,380 lb
Hydraulic Pump Flow Capacity
53.7 gpm
Shipping Length Of Unit
20.53 ft
Shipping Height Of Unit
8.39 ft
R80-7
Net Power
58 hp
Operating Weight
17,200 lb
Hydraulic Pump Flow Capacity
40 gpm
Max Cutting Height
23.82 ft
Max Loading Height
16.97 ft
R110-7
Net Power
84 hp
Operating Weight
24,692 lb
Hydraulic Pump Flow Capacity
59.2 gpm
Shipping Length Of Unit
23.76 ft
Shipping Height Of Unit
8.37 ft
Hyundai R110D-7
Net Power
84 hp
Operating Weight
26,235 lb
Hydraulic Pump Flow Capacity
59.2 gpm
Shipping Length Of Unit
25 ft
Shipping Height Of Unit
8.37 ft
Hyundai R140LC-7
Net Power
105 hp
Operating Weight
30,821 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
25.63 ft
Shipping Height Of Unit
8.67 ft
Hyundai R140LC-7A
Net Power
105 hp
Operating Weight
30,821 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
25.46 ft
Shipping Height Of Unit
8.99 ft
Hyundai R140LCD-7
Net Power
105 hp
Operating Weight
32,629 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
26.97 ft
Shipping Height Of Unit
8.67 ft
Hyundai R140LCD-7A
Net Power
105 hp
Operating Weight
32,629 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
26.97 ft
Shipping Height Of Unit
8.67 ft
R140LCM-7
Net Power
105 hp
Operating Weight
37,214 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
25.46 ft
Shipping Height Of Unit
8.99 ft
R140LCM-7A
Net Power
105 hp
Operating Weight
37,214 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Shipping Length Of Unit
25.46 ft
Shipping Height Of Unit
8.99 ft
R140W-7
Net Power
105 hp
Operating Weight
29,760 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Height To Top Of Cab
10.31 ft
Tail Swing Radius
7.49 ft
R140W-7A
Net Power
105 hp
Operating Weight
31,967 lb
Hydraulic Pump Flow Capacity
68.7 gpm
Height To Top Of Cab
10.31 ft
Tail Swing Radius
7.49 ft
R170W-3
Net Power
116 hp
Operating Weight
36,156 lb
Hydraulic Pump Flow Capacity
87.2 gpm
Height To Top Of Cab
10.11 ft
Tail Swing Radius
8.31 ft
R170W-7
Net Power
116 hp
Operating Weight
35,715 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Height To Top Of Cab
10.34 ft
Tail Swing Radius
8.14 ft
R170W-7A
Net Power
116 hp
Operating Weight
38,052 lb
Hydraulic Pump Flow Capacity
88.8 gpm
Height To Top Of Cab
10.34 ft
Tail Swing Radius
8.17 ft
R210-7H
Net Power
157 hp
Operating Weight
45,856 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Shipping Length Of Unit
31.24 ft
Shipping Height Of Unit
9.81 ft
R210LC-7 LR
Net Power
150 hp
Operating Weight
54,000 lb
Max Cutting Height
41.18 ft
Max Loading Height
33.73 ft
Max Reach Along Ground
49.61 ft
R210LC-7H
Net Power
157 hp
Operating Weight
47,399 lb
Hydraulic Pump Flow Capacity
116.3 gpm
Shipping Length Of Unit
31.24 ft
Shipping Height Of Unit
9.81 ft
R210LC-9
Net Power
143 hp
Operating Weight
49,935 lb
Hydraulic Pump Flow Capacity
117.3 gpm
Shipping Length Of Unit
31.67 ft
Shipping Height Of Unit
10.5 ft