Kioti CK2620 to NX6010 specifications

CK2620, CK2620H and NX6010H need separate equipment checks

The CK2620 and CK2620H share a headline engine rating, but their shaft-power entries differ. KIOTI’s CK2620 page gives the manual tractor 19.50 hp at the PTO; the CK2620H page gives 18.70 hp for the hydrostatic version. An implement match near that limit therefore needs the H suffix as well as the engine rating.

A quotation that says only CK2620 does not settle which transmission or PTO output is being offered.

The web references also distinguish a dry dual-stage clutch on the manual tractor from a dry single-stage entry on the H model. On the hydrostatic version, the stated travel control is three ranges with continuously variable speeds. Treat that range selection separately from the manual tractor’s gear count; the same engine label does not establish an identical drive arrangement.

The brochure and website disagree about the manual gearbox

KIOTI’s CK20/CK20SE brochure, printed page 6, lists 9F/3R for the base CK2620. The current Canadian web table instead gives twelve forward and twelve reverse speeds. The brochure’s following CK20SE table includes a separate synchro-shuttle specification.

Do not silently substitute an SE gearbox for a base model, or assume that a website/brochure difference proves a retrofit. Identify the actual transmission from the tractor’s documentation before selecting a machine for repeated reversing.

The brochure footnotes its 1,631-lb hitch figure at 24 inches aft of the hitch. That location matters when comparing carrying specifications; it is not an unqualified loader rating. The same brochure identifies a standard rear PTO and an optional mid PTO.

A rear-powered implement and a mid-driven attachment consequently need different equipment confirmation, even when the seller lists the tractor with the same engine and rear hitch.

NX6010H power data needs clarification, not a zero

The NX6010H reference describes hydrostatic drive, an independent PTO, torque compensation and an anti-stall function. Those are NX-specific selection points, rather than reasons to describe it as another CK2620 trim. Its marketing introduction calls it a 60-horsepower tractor, while the detailed power row prints 57.70 hp with 44.70 kW.

Those displayed power values do not form a consistent unit pair. This guide preserves that source discrepancy rather than inventing a corrected conversion or printing an unavailable rating as zero. Obtain the applicable NX engine specification for a power-critical purchase.