Machine models

Liebherr LR614 and 16 related models specifications

Entries in this reference
Listing-entry count
17

Short answer

The Liebherr LR614 and 16 related models are closely matched crawler dozers that Liebherr lists separately, rated 97 hp to 246.8 hp across the 17 versions, in 17 versions: LR614, LR626 LITRONIC, LR636 LITRONIC, LR632B L, PR724 L, PR724 LGP, and 11 more. Listed weight is 24,648 lb to 54,245 lb across the 15 versions.

LR614 and 16 related models specification matrix — Listing labels reported by the source
Publisher name	Source guide	Listing-entry count	Labels named by the source
Liebherr	LR614 and 16 related models	17	LR614, LR626 LITRONIC, LR636 LITRONIC, LR632B L, PR724 L, PR724 LGP, and 11 more

Dimensions and weight
Specification	LR614	LR632B
Length With Bucket On Ground	18.71 ft	22.14 ft
Clearance At Full Height And Dump	8.57 ft	18.07 ft
Reach At Dump Height	3.03 ft	3.88 ft

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Ground Clearance	1.34 ft	1.38 ft	1.59 ft	1.63 ft	1.56 ft	1.56 ft	1.56 ft	1.65 ft	1.65 ft	1.65 ft	1.59 ft	16.78 ft	1.8 ft	1.68 ft	1.59 ft	1.59 ft	1.63 ft

Specification	LR614
Width To Outside Of Tracks	6.75 ft

Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Height To Top Of Cab	9.84 ft	10.69 ft	10.49 ft	10.49 ft	10.49 ft	10.72 ft	10.72 ft	10.72 ft	10.85 ft	10.84 ft	10.8 ft	10.66 ft	10.85 ft	10.85 ft	10.85 ft

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B
Length To Front Of Track	12.67 ft	15.22 ft	16.21 ft	15.76 ft

Specification	LR626 LITRONIC	LR636 LITRONIC	PR736 LITRONIC
Track Gauge	5.71 ft	5.12 ft	6.01 ft

Specification	LR626 LITRONIC	LR636 LITRONIC
Track Shoe Width	7.55 ft	8.37 ft
Height	Exhaust pipe - 2688 mm, 8.10 ft in	Exhaust pipe - 2866 mm , 9.5 ft in

Specification	LR636 LITRONIC
Height Over Cab	10.11 ft

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M
Width Over Tracks	7.82 ft	8.69 ft	10.66 ft	8.69 ft	8.94 ft	11.4 ft	8.94 ft	8.8 ft	10.2 ft	7.85 ft	8.8 ft	9.82 ft

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Length Of Track On Ground	9.29 ft	9.29 ft	10.54 ft	10.54 ft	9.29 ft	10.63 ft	10.63 ft	9.72 ft	10.7 ft	9.3 ft	10.75 ft	10.75 ft	9.82 ft

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR742B L	PR742B M	PR744 L
Length W/O Blade	14.23 ft	13.69 ft	13.69 ft	13.69 ft	13.63 ft	14.08 ft	14.08 ft	14.11 ft	14.6 ft	14.11 ft	14.11 ft	14.11 ft

Specification	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR742B L	PR742B M	PR744 L
Length W/ Blade	18.15 ft	18.48 ft	19.53 ft	17.92 ft	19.11 ft	18.95 ft	18.94 ft	17.92 ft

Undercarriage
Specification	LR614	PR724 L	PR724 LGP	PR724 XL	PR742B	LR632B	PR742B L	PR742B M	PR744 L
Track Gauge	63 in	5.91 ft	6.84 ft	5.91 ft	6.5 ft	70.87 in	6.5 ft	7.16 ft	6.5 ft

Specification	LR614
Length Of Track On Ground	7.14 ft

Specification	LR614	PR724 L	PR724 LGP	PR724 XL
Number Of Shoes Per Side	38	2	2	2

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M
Number Of Track Rollers Per Side	6	6	6	7	7	8	8	7	8	8	7	6	7	7	8	8

Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR742B L	PR742B M	PR744 L
Ground Pressure	7.96 psi	10.1 psi	6.83 psi	5.08 psi	6.26 psi	8.53 psi	5.4 psi	7.68 psi	10.95 psi	10.1 psi	10.24 psi	6.54 psi	10.01 psi

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	PR736 LITRONIC
Track Shoe Width	18 in	20 in	22.05 in	24.02 in

Specification	LR626 LITRONIC	LR636 LITRONIC	PR736 LGP	PR736 LITRONIC
Number Of Carrier Rollers Per Side	1	1	2	2

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR742B L	PR742B M	PR744 L
Standard Shoe Size	20 in	24 in	36 in	24 in	24 in	38 in	24 in	20 in	31.97 in	20 in	32 in	24.02 in

Specification	PR742B	PR742B L	PR742B M
Ground Contact Area	4,650 in2	5,115 in2	8,215 in2

Engine
Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR742B L	PR742B M	PR744 L
Number Of Cylinders	4	4	4	6	4	4	4	6	6	6	6	6	4	6	6	6

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Engine Model	4045HF289	D 924-A7-04	D 934 A7	D 936 L A6	D 924 TI-E	D 924 TI-E	D 924 TI-E	D 926 TI-E	D 926 TI-E	D 926 TI-E	D 926 TI-E	D 926 Tl-E	D 934 A7 - Tier 4 Final	D 934 A7 Emission regulations , EPA /CARB Tier 4f	D 926 TI-E	D 926 TI-E	D936-LA6

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LITRONIC	PR742B L	PR742B M
Net Power	97 hp	140.9 hp	181.1 hp	158 hp	158 hp	158 hp	197 hp	197 hp	197 hp	234 hp	180 hp	201.2 hp	234 hp	234 hp

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Power Measured @	2,200 rpm	2,100 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm	1,800 rpm

Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LITRONIC	PR742B L	PR742B M
Aspiration	Turbocharged	turbo-charged	Direct injection turbo-charged	Direct injection turbo-charged	Direct injection turbo-charged	Direct injection turbo-charged	Direct injection turbo-charged	Direct injection turbo-charged	Turbo-charged	turbo-charged	Turbochanged	Turbo-charged	Turbo-charged

Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Displacement	274.7 cu in	274.7 cu in	427.2 cu in	640.8 cu in	402.8 cu in	402.8 cu in	403 cu in	610 cu in	610 cu in	610 cu in	610 cu in	427.2 cu in	427.2 cu in	610 cu in	610 cu in	640.8 cu in

Specification	LR626 LITRONIC	LR636 LITRONIC	PR736 LITRONIC
Starter	7 hp	11 hp	10.5 hp

Specification	LR626 LITRONIC	LR636 LITRONIC
Emission Tier Level	EPA/CARB Tier 4f	EPA/CARB Tier 4f
Bore	4.1 in	4.9 in
Stroke	5.2 in	6 in

Specification	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR736 LGP	PR744 L
Gross Power	161 hp	214.6 hp	204 hp	160 hp	160 hp	160 hp	200 hp	200 hp	200 hp	201.2 hp	246.8 hp

Specification	PR736 LITRONIC
Lubrication System	Pressurized lube system
Injection System	Direct fuel injection
Battery	2 x 180 Ah
Cooling System	Hydrostatic fan drive
Air Cleaner	Dry-type air cleaner
Max Power	234.7 hp

Operational
Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Operating Weight	24,648 lb	44,970 lb	36,729 lb	39,738 lb	38,129 lb	46,028 lb	49,785 lb	47,406 lb	51,000 lb	46,617 lb	54,234 lb	54,234 lb	52,500 lb	54,200 lb	54,245 lb

Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M
Fuel Capacity	55.5 gal	105.7 gal	96.5 gal	96.5 gal	96.5 gal	105.7 gal	105.7 gal	116.3 gal	118.9 gal	84.6 gal	113.6 gal	113.6 gal	118.9 gal	118.9 gal
Cooling System Fluid Capacity	6.4 gal	16.4 gal	8 gal	8 gal	8 gal	11.4 gal	11.4 gal	11.4 gal	16.4 gal	15.4 gal	10.9 gal	10.9 gal	16.4 gal	16.4 gal
Engine Oil Capacity	3.2 gal	11.4 gal	5.1 gal	5.1 gal	5.1 gal	5.9 gal	5.9 gal	5.9 gal	5.9 gal	5.9 gal	7.7 gal	7.7 gal	5.9 gal	5.9 gal

Specification	LR614	LR632B
Final Drive Fluid Capacity - Each	2.4 gal	4.5 gal
Hydraulic System Fluid Capacity	43.1 gal	46.3 gal
Bucket Capacity - Struck	1.8 yd3	3.1 yd3
Max Speed	5.9 mph	6.9 mph

Specification	LR614
Static Tipping Load	16,175 lb

Specification	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LITRONIC	PR742B L	PR742B M
Operating Voltage	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V
Alternator Supplied Amperage	55 amps	80 amps	55 amps	55 amps	55 amps	55 amps	55 amps	55 amps	55 amps	55 amps	140 amps	55 amps	55 amps

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M
Hydraulic Fluid Capacity	42.8 gal	42.8 gal	42.8 gal	42.8 gal	42.8 gal	42.8 gal	42.8 gal	50 gal	29.4 gal	29.4 gal	50 gal	50 gal
Final Drives Fluid Capacity	4.3 gal	4.9 gal	4.9 gal	4.9 gal	3.7 gal	3.7 gal	3.7 gal	6.1 gal	7.1 gal	5.9 gal	6.1 gal	6.1 gal

Specification	LR632B
Breakout Force - Std Bucket	39,791 lb

Specification	PR736 LITRONIC
DEF Tank Capacity	13.3 gal

Hydraulic
Specification	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B
Pump Type	gear	Variable displacement pump	Variable displacement pump	swash plate piston pump
Pump Flow Capacity	30.4 gpm	41 gpm	55.3 gpm	55.3 gpm

Specification	LR614	LR632B
Relief Valve Pressure	3,335 psi	6,090 psi

Specification	LR614
Raise Time	6.4 sec
Dump Time	1.9 sec
Lower Time	3.1 sec

Specification	LR626 LITRONIC	LR636 LITRONIC
Pressure	3,770 psi	3,770 psi

Electrical System
Specification	LR626 LITRONIC	LR636 LITRONIC
Alternator	140 A	140 A
Voltage	24 V V	24 V V
Batteries	2 x 180 Ah	2 x 180 Ah

Capacities
Specification	LR626 LITRONIC	LR636 LITRONIC
Engine Oil With Filter	5.1 gal	7.7 gal
Fuel Tank	84.6 gal	105.7 gal
Hydraulic Tank	23.8 gal	22.8 gal
Diesel Exhaust Fluid (DEF) Tank	13 gal	13 gal
Cooling System	8 gal	11.1 gal
Final Drive	4 gal	5.3 gal

Transmission and speeds
Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR736 LGP	PR736 LITRONIC	PR744 L
Transmission Type	Infinitely variable hydrostatic travel drive, independent drive for each frame	Infinitely variable hydrostatic travel drive independent drive for each frame	Infinitely variable hydrostatic travel drive independent drive for each track frame	Infinitley variable hydrostatic travel drive independent drive for each track frame	Infinitely variable hydrostatic travel drive independent drive for each frame	Hydrostatic travel drive and control	Hydrostatic travel drive and control	Variable hydrostatic travel drive	Infinitely variable hydrostatic travel drive, independent drive for each track	Hydrostatic

Specification	LR632B L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR742B L	PR742B M	PR744 L
Number Of Forward Gears	3	3	3	3	3	3	3	3	3	2

Specification	LR632B L	PR724 LGP	PR724 XL	PR734 LGP	PR734 XL	PR742B	PR742B L	PR742B M	PR744 L
Number Of Reverse Gears	3	2	2	2	2	2	2	2	2

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR742B L	PR742B M	PR744 L
Max Speed - Forward	6.9 mph	6.9 mph	6.9 mph	6.9 mph	6.9 mph	6.9 mph	6.9 mph	6.9 mph	6.8 mph	6.8 mph	6.8 mph	6.9 mph

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Max Speed - Reverse	6.9 mph	4.9 mph	4.9 mph	4.9 mph	4.9 mph	4.8 mph	4.9 mph	6.8 mph	2.5 mph	4.9 mph	4.9 mph	6.9 mph

Specification	PR736 LITRONIC
Steering	Hydrostatic

Hydraulic System
Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LITRONIC	PR742B L	PR742B M
Pump Type	swash plate variable displacement piston pump	swash plate piston pump	swash plate piston pump	swash plate piston pump	swash plate variable displacement piston pump	swash plate piston pump	swash plate piston pump	Load sensing proportional pump flow control	Swash plate piston pump	Load sensing Proportional pump flow control	Load sensing proportional pump flow control
Pump Flow Capacity	55.3 gpm	46 gpm	46 gpm	46 gpm	55.3 gpm	55.3 gpm	55.3 gpm	77 gpm	54.7 gpm	77 gpm	77 gpm

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR742B L	PR742B M
Relief Valve Pressure	2,900 psi	2,900 psi	2,900 psi	2,900 psi	2,900 psi	2,900 psi	2,900 psi	2,320 psi	2,320 psi	2,320 psi

Specification	PR736 LITRONIC
System Pressure	3,770 psi
Hydraulic System	Load sensing (demand-controlled)
Controls	Single joystick for all blade functions
Control Valve	2 segments, expandable to 4
Filtration	Return filter with magnetic rod in the hydraulic tank

Standard Blade
Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Blade width	11.1 ft	10.6 ft	12.5 ft	10.6 ft	11.1 ft	13.2 ft	11.1 ft	13.1 ft	13.3 ft	12 ft	13.1 ft	14.8 ft	13.1 ft
Blade height	55.2 in	47.3 in	43.4 in	47.3 in	55.2 in	45.3 in	55.2 in	57.1 in	4.1 in	53.2 in	57.1 in	53.2 in	57.1 in
Capacity	7.3 yd3	4.2 yd3	4.5 yd3	4.2 yd3	7.7 yd3	5.4 yd3	7.7 yd3	8.4 yd3	6.1 yd3	6.2 yd3	8.4 yd3	8.3 yd3	8.4 yd3
Cutting Depth	21.2 in	20.5 in	19.3 in	19.6 in	21.4 in	21.8 in	22 in	20.7 in	26.6 in	26.8 in	46.3 in	23.7 in	20.7 in

Specification	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR736 LGP
Blade Angle (Both Directions)	10 degrees	23 degrees	23 degrees	23 degrees	20 degrees

Specification	PR736 LITRONIC
Lifting Height	4.4 ft
Transport Width	10.7 ft
Blade Pitch Adjustment	5 degrees
Blade Angle Adjustment	20 degrees
Maximum Blade Tilt	1.8 ft
Overall Length, Blade Straight	20 ft
Overall Length, Blade Angled	21.9 ft

Years Of Manufacture
Specification	PR736 LGP
Approximate First Year Of Manufacture	2014 A.D
Approximate Last Year Of Manufacture	2015 A.D

Brakes
Specification	PR736 LITRONIC
Parking Brake	Multi-disk brake, wear-free, automatically applied with neutral joystick position
Service Brake	Hydrostatic (self-locking), wear-free
Travel Control	Single joystick for all travel and steering functions. Optional: detented Joystick, with inching pedal

Variants — Source comparison annotation
Source guide	Differing-field count reported
LR614 and 16 related models	103

Ratios
Figure	LR614	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M	PR744 L
Engine horsepower per 1,000 lb of weight	3.9	4.5	4.3	4.0	4.1	4.3	4.0	4.2	4.6	3.9	3.7	3.7	4.5	4.3	4.5

Figure	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LITRONIC	PR742B L	PR742B M
Pump flow per engine horsepower	0.31 gpm	0.29 gpm	0.31 gpm	0.27 gpm	0.29 gpm	0.29 gpm	0.29 gpm	0.28 gpm	0.28 gpm	0.28 gpm	0.33 gpm	0.31 gpm	0.27 gpm	0.33 gpm	0.33 gpm

Figure	LR614	LR626 LITRONIC	LR636 LITRONIC	LR632B L	PR724 L	PR724 LGP	PR724 XL	PR734 L	PR734 LGP	PR734 XL	PR742B	LR632B	PR736 LGP	PR736 LITRONIC	PR742B L	PR742B M
Fuel tank per engine horsepower	0.57 gal	0.60 gal	0.58 gal	0.52 gal	0.61 gal	0.61 gal	0.61 gal	0.54 gal	0.54 gal	0.59 gal	0.51 gal	0.47 gal	0.56 gal	0.56 gal	0.51 gal	0.51 gal

Reference directory classification
Equipment group	crawler dozer

Liebherr's listing for the LR614 and 16 related models matches a crawler dozer; see the crawler dozers page.

History and service record of LR614 and 16 related models

Production run. LECTURA Specs dates the Liebherr LR 614 crawler loader to 2007 to 2014. Liebherr LR 614 (2007 - 2014), LECTURA Specs.
The LR line. Wikipedia's Liebherr LR series article covers the company's crawler loaders, of which the LR 614 is a 97 hp Series 4 Litronic model; used units from 2007 and 2008 are on the market. Liebherr LR series, Wikipedia.
Manuals. Series 4 Litronic service manuals for the LR 614 are circulated online, and Liebherr's own brochure covers the LR 624 and LR 634 crawler loaders. Crawler loaders LR 634 LR 624 brochure, Liebherr.

Used market for the LR614 and 16 related models — Dated first-page listing snapshot
Observation date	Listing source	Equipment search	Listings
2026-09-24	MachineryTrader	Liebherr crawler dozer	65

Model	Listed	Model years	Lowest asking	Highest asking	Median asking	Median hours
LR614	1	2011	$58,071	$58,071	$58,071	None shown
LR626 LITRONIC	4	2017 to 2024	$95,000	$279,000	$159,800	6,600
LR636 LITRONIC	1	2023	None shown	None shown	None shown	None shown
PR724 L	5	2008 to 2014	$56,363	$89,953	$67,500	None shown
PR724 LGP	3	2008 to 2014	$75,000	$89,953	$82,477	None shown
PR724 XL	1	2012	$60,000	$60,000	$60,000	None shown
PR734 L	3	2004 to 2013	$40,344	$78,567	$42,699	None shown
PR734 LGP	3	2004 to 2013	$40,344	$78,567	$42,699	None shown
PR736 LGP	11	2015 to 2025	$79,592	$325,000	$127,973	None shown
PR736 LITRONIC	29	2015 to 2025	$79,592	$389,000	$187,430	500
PR744 L	4	2015	None shown	None shown	None shown	998

LR614 and 16 related models: recall reference — Dated CPSC search
Search date	Database	Names queried	Search result
2026-09-24	U.S. Consumer Product Safety Commission	Liebherr together with the crawler dozer LR614, LR626 LITRONIC, LR636 LITRONIC, LR632B L	No matching recall in this search

Sources for this page
Evidence class	Document, classification and recorded date
Reference site	Reference site: Liebherr LR614 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr LR626 LITRONIC — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr LR636 LITRONIC — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr LR632B L — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR724 L — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR724 LGP — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR724 XL — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR734 L — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR734 LGP — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR734 XL — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR742B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr LR632B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR736 LGP — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR736 LITRONIC — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR742B L — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR742B M — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Liebherr PR744 L — RitchieSpecs. Observed 2026-09-24.
Published history	Published history Source: Liebherr LR 614 (2007 - 2014), LECTURA Specs — LECTURA Specs. Observed 2026-09-25.
Published history	Published history Source: Liebherr LR series, Wikipedia — Wikipedia. Observed 2026-09-25.
Published history	Published history Source: Crawler loaders LR 634 LR 624 brochure, Liebherr — Power-equip. Observed 2026-09-25.
Used-market listings	Used-market listings: MachineryTrader listings for Liebherr LR614 — MachineryTrader. Observed 2026-09-24.
Federal agency data	Federal agency data: Recall database search for Liebherr — U.S. Consumer Product Safety Commission. Observed 2026-09-24.

Liebherr LR614 and 16 related models: Configuration records

LR614

Specification	Source figure
Dimensions and weight
Length With Bucket On Ground	18.71 ft
Ground Clearance	1.34 ft
Width To Outside Of Tracks	6.75 ft
Height To Top Of Cab	9.84 ft
Clearance At Full Height And Dump	8.57 ft
Reach At Dump Height	3.03 ft
Length To Front Of Track	12.67 ft
Undercarriage
Number Of Shoes Per Side	38
Number Of Track Rollers Per Side	6
Ground Pressure	7.96 psi
Track Shoe Width	18 in
Engine
Number Of Cylinders	4
Engine Model	4045HF289
Net Power	97 hp
Power Measured @	2,200 rpm
Aspiration	Turbocharged
Displacement	274.7 cu in
Operational
Operating Weight	24,648 lb
Fuel Capacity	55.5 gal
Cooling System Fluid Capacity	6.4 gal
Engine Oil Capacity	3.2 gal
Final Drive Fluid Capacity - Each	2.4 gal
Hydraulic System Fluid Capacity	43.1 gal
Static Tipping Load	16,175 lb
Bucket Capacity - Struck	1.8 yd3
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Max Speed	5.9 mph
Hydraulic
Raise Time	6.4 sec
Dump Time	1.9 sec
Lower Time	3.1 sec
Additional specifications
Track Gauge	63 in
Length Of Track On Ground	7.14 ft
Pump Type	gear
Pump Flow Capacity	30.4 gpm
Relief Valve Pressure	3,335 psi

Source

LR626 LITRONIC

Specification	Source figure
Dimensions and weight
Ground Clearance	1.38 ft
Length To Front Of Track	15.22 ft
Undercarriage
Number Of Track Rollers Per Side	6
Number Of Carrier Rollers Per Side	1
Engine
Number Of Cylinders	4
Engine Model	D 924-A7-04
Net Power	140.9 hp
Power Measured @	2,100 rpm
Displacement	274.7 cu in
Starter	7 hp
Cooling System	8 gal
Additional specifications
Track Gauge	5.71 ft
Height	Exhaust pipe - 2688 mm, 8.10 ft in
Emission Tier Level	EPA/CARB Tier 4f
Gross Power	161 hp
Bore	4.1 in
Stroke	5.2 in
Pump Type	Variable displacement pump
Pump Flow Capacity	41 gpm
Pressure	3,770 psi
Alternator	140 A
Voltage	24 V V
Batteries	2 x 180 Ah
Engine Oil With Filter	5.1 gal
Fuel Tank	84.6 gal
Hydraulic Tank	23.8 gal
Diesel Exhaust Fluid (DEF) Tank	13 gal
Final Drive	4 gal

Source

LR636 LITRONIC

Specification	Source figure
Dimensions and weight
Ground Clearance	1.59 ft
Length To Front Of Track	16.21 ft
Undercarriage
Number Of Track Rollers Per Side	6
Number Of Carrier Rollers Per Side	1
Engine
Number Of Cylinders	4
Engine Model	D 934 A7
Net Power	181.1 hp
Power Measured @	1,800 rpm
Displacement	427.2 cu in
Starter	11 hp
Cooling System	11.1 gal
Additional specifications
Track Gauge	5.12 ft
Height	Exhaust pipe - 2866 mm , 9.5 ft in
Height Over Cab	10.11 ft
Emission Tier Level	EPA/CARB Tier 4f
Gross Power	214.6 hp
Bore	4.9 in
Stroke	6 in
Pump Type	Variable displacement pump
Pump Flow Capacity	55.3 gpm
Pressure	3,770 psi
Alternator	140 A
Voltage	24 V V
Batteries	2 x 180 Ah
Engine Oil With Filter	7.7 gal
Fuel Tank	105.7 gal
Hydraulic Tank	22.8 gal
Diesel Exhaust Fluid (DEF) Tank	13 gal
Final Drive	5.3 gal

Source

LR632B L

Specification	Source figure
Dimensions and weight
Ground Clearance	1.63 ft
Height To Top Of Cab	10.69 ft
Width Over Tracks	7.82 ft
Length W/O Blade	14.23 ft
Undercarriage
Number Of Track Rollers Per Side	7
Ground Pressure	10.1 psi
Standard Shoe Size	20 in
Engine
Number Of Cylinders	6
Engine Model	D 936 L A6
Power Measured @	1,800 rpm
Aspiration	turbo-charged
Displacement	640.8 cu in
Operational
Operating Weight	44,970 lb
Fuel Capacity	105.7 gal
Cooling System Fluid Capacity	16.4 gal
Engine Oil Capacity	11.4 gal
Operating Voltage	24 V
Alternator Supplied Amperage	80 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	4.3 gal
Transmission and speeds
Transmission Type	Infinitely variable hydrostatic travel drive, independent drive for each frame
Number Of Forward Gears	3
Number Of Reverse Gears	3
Max Speed - Forward	6.9 mph
Max Speed - Reverse	6.9 mph
Standard Blade
Blade width	11.1 ft
Blade height	55.2 in
Capacity	7.3 yd3
Cutting Depth	21.2 in
Additional specifications
Length Of Track On Ground	9.29 ft
Gross Power	204 hp
Pump Type	swash plate variable displacement piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	55.3 gpm
Blade Angle (Both Directions)	10 degrees

Source

PR724 L

Specification	Source figure
Dimensions and weight
Ground Clearance	1.56 ft
Height To Top Of Cab	10.49 ft
Width Over Tracks	8.69 ft
Length W/O Blade	13.69 ft
Undercarriage
Number Of Shoes Per Side	2
Number Of Track Rollers Per Side	7
Ground Pressure	6.83 psi
Standard Shoe Size	24 in
Engine
Number Of Cylinders	4
Engine Model	D 924 TI-E
Net Power	158 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	402.8 cu in
Operational
Operating Weight	36,729 lb
Fuel Capacity	96.5 gal
Cooling System Fluid Capacity	8 gal
Engine Oil Capacity	5.1 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	4.9 gal
Transmission and speeds
Transmission Type	Infinitely variable hydrostatic travel drive independent drive for each frame
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.9 mph
Standard Blade
Blade width	10.6 ft
Blade height	47.3 in
Capacity	4.2 yd3
Cutting Depth	20.5 in
Additional specifications
Length Of Track On Ground	9.29 ft
Track Gauge	5.91 ft
Gross Power	160 hp
Pump Type	swash plate piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	46 gpm
Blade Angle (Both Directions)	23 degrees

Source

PR724 LGP

Specification	Source figure
Dimensions and weight
Ground Clearance	1.56 ft
Height To Top Of Cab	10.49 ft
Width Over Tracks	10.66 ft
Length W/O Blade	13.69 ft
Undercarriage
Number Of Shoes Per Side	2
Number Of Track Rollers Per Side	8
Ground Pressure	5.08 psi
Standard Shoe Size	36 in
Engine
Number Of Cylinders	4
Engine Model	D 924 TI-E
Net Power	158 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	402.8 cu in
Operational
Operating Weight	39,738 lb
Fuel Capacity	96.5 gal
Cooling System Fluid Capacity	8 gal
Engine Oil Capacity	5.1 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	4.9 gal
Transmission and speeds
Transmission Type	Infinitely variable hydrostatic travel drive independent drive for each track frame
Number Of Forward Gears	3
Number Of Reverse Gears	2
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.9 mph
Standard Blade
Blade width	12.5 ft
Blade height	43.4 in
Capacity	4.5 yd3
Cutting Depth	19.3 in
Additional specifications
Length Of Track On Ground	10.54 ft
Track Gauge	6.84 ft
Gross Power	160 hp
Pump Type	swash plate piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	46 gpm
Blade Angle (Both Directions)	23 degrees

Source

PR724 XL

Specification	Source figure
Dimensions and weight
Ground Clearance	1.56 ft
Height To Top Of Cab	10.49 ft
Width Over Tracks	8.69 ft
Length W/O Blade	13.69 ft
Undercarriage
Number Of Shoes Per Side	2
Number Of Track Rollers Per Side	8
Ground Pressure	6.26 psi
Standard Shoe Size	24 in
Engine
Number Of Cylinders	4
Engine Model	D 924 TI-E
Net Power	158 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	403 cu in
Operational
Operating Weight	38,129 lb
Fuel Capacity	96.5 gal
Cooling System Fluid Capacity	8 gal
Engine Oil Capacity	5.1 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	4.9 gal
Transmission and speeds
Transmission Type	Infinitley variable hydrostatic travel drive independent drive for each track frame
Number Of Forward Gears	3
Number Of Reverse Gears	2
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.9 mph
Standard Blade
Blade width	10.6 ft
Blade height	47.3 in
Capacity	4.2 yd3
Cutting Depth	19.6 in
Additional specifications
Length Of Track On Ground	10.54 ft
Track Gauge	5.91 ft
Gross Power	160 hp
Pump Type	swash plate piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	46 gpm
Blade Angle (Both Directions)	23 degrees

Source

PR734 L

Specification	Source figure
Dimensions and weight
Ground Clearance	1.65 ft
Height To Top Of Cab	10.72 ft
Length W/ Blade	18.15 ft
Width Over Tracks	8.94 ft
Length W/O Blade	13.63 ft
Undercarriage
Number Of Track Rollers Per Side	7
Ground Pressure	8.53 psi
Standard Shoe Size	24 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	197 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	610 cu in
Operational
Operating Weight	46,028 lb
Fuel Capacity	105.7 gal
Cooling System Fluid Capacity	11.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	3.7 gal
Transmission and speeds
Transmission Type	Infinitely variable hydrostatic travel drive independent drive for each frame
Number Of Forward Gears	3
Max Speed - Forward	6.9 mph
Standard Blade
Blade width	11.1 ft
Blade height	55.2 in
Capacity	7.7 yd3
Cutting Depth	21.4 in
Additional specifications
Length Of Track On Ground	9.29 ft
Gross Power	200 hp
Pump Type	swash plate variable displacement piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	55.3 gpm

Source

PR734 LGP

Specification	Source figure
Dimensions and weight
Ground Clearance	1.65 ft
Height To Top Of Cab	10.72 ft
Length W/ Blade	18.48 ft
Width Over Tracks	11.4 ft
Length W/O Blade	14.08 ft
Undercarriage
Number Of Track Rollers Per Side	8
Ground Pressure	5.4 psi
Standard Shoe Size	38 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	197 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	610 cu in
Operational
Operating Weight	49,785 lb
Fuel Capacity	105.7 gal
Cooling System Fluid Capacity	11.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	3.7 gal
Transmission and speeds
Transmission Type	Hydrostatic travel drive and control
Number Of Forward Gears	3
Number Of Reverse Gears	2
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.9 mph
Standard Blade
Blade width	13.2 ft
Blade height	45.3 in
Capacity	5.4 yd3
Cutting Depth	21.8 in
Additional specifications
Length Of Track On Ground	10.63 ft
Gross Power	200 hp
Pump Type	swash plate piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	55.3 gpm

Source

PR734 XL

Specification	Source figure
Dimensions and weight
Ground Clearance	1.65 ft
Height To Top Of Cab	10.72 ft
Length W/ Blade	19.53 ft
Width Over Tracks	8.94 ft
Length W/O Blade	14.08 ft
Undercarriage
Number Of Track Rollers Per Side	8
Ground Pressure	7.68 psi
Standard Shoe Size	24 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	197 hp
Power Measured @	1,800 rpm
Aspiration	Direct injection turbo-charged
Displacement	610 cu in
Operational
Operating Weight	47,406 lb
Fuel Capacity	116.3 gal
Cooling System Fluid Capacity	11.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	42.8 gal
Final Drives Fluid Capacity	3.7 gal
Transmission and speeds
Transmission Type	Hydrostatic travel drive and control
Number Of Forward Gears	3
Number Of Reverse Gears	2
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.8 mph
Standard Blade
Blade width	11.1 ft
Blade height	55.2 in
Capacity	7.7 yd3
Cutting Depth	22 in
Additional specifications
Length Of Track On Ground	10.63 ft
Gross Power	200 hp
Pump Type	swash plate piston pump
Relief Valve Pressure	2,900 psi
Pump Flow Capacity	55.3 gpm

Source

PR742B

Specification	Source figure
Dimensions and weight
Ground Clearance	1.59 ft
Height To Top Of Cab	10.85 ft
Length W/ Blade	17.92 ft
Width Over Tracks	8.8 ft
Length W/O Blade	14.11 ft
Undercarriage
Number Of Track Rollers Per Side	7
Ground Pressure	10.95 psi
Standard Shoe Size	20 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	234 hp
Power Measured @	1,800 rpm
Aspiration	Turbo-charged
Displacement	610 cu in
Operational
Operating Weight	51,000 lb
Fuel Capacity	118.9 gal
Cooling System Fluid Capacity	16.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	50 gal
Final Drives Fluid Capacity	6.1 gal
Transmission and speeds
Number Of Forward Gears	3
Number Of Reverse Gears	2
Max Speed - Forward	6.9 mph
Max Speed - Reverse	4.9 mph
Standard Blade
Blade width	13.1 ft
Blade height	57.1 in
Capacity	8.4 yd3
Cutting Depth	20.7 in
Additional specifications
Length Of Track On Ground	9.72 ft
Track Gauge	6.5 ft
Ground Contact Area	4,650 in2
Pump Type	Load sensing proportional pump flow control
Relief Valve Pressure	2,320 psi
Pump Flow Capacity	77 gpm

Source

LR632B

Specification	Source figure
Dimensions and weight
Height To Top Of Cab	10.84 ft
Undercarriage
Number Of Track Rollers Per Side	6
Ground Pressure	10.1 psi
Engine
Number Of Cylinders	6
Engine Model	D 926 Tl-E
Net Power	180 hp
Power Measured @	1,800 rpm
Aspiration	turbo-charged
Operational
Operating Weight	46,617 lb
Fuel Capacity	84.6 gal
Cooling System Fluid Capacity	15.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic System
Pump Type	swash plate piston pump
Pump Flow Capacity	55.3 gpm
Relief Valve Pressure	6,090 psi
Additional specifications
Length With Bucket On Ground	22.14 ft
Clearance At Full Height And Dump	18.07 ft
Reach At Dump Height	3.88 ft
Length To Front Of Track	15.76 ft
Track Gauge	70.87 in
Final Drive Fluid Capacity - Each	4.5 gal
Hydraulic System Fluid Capacity	46.3 gal
Breakout Force - Std Bucket	39,791 lb
Bucket Capacity - Struck	3.1 yd3
Max Speed	6.9 mph

Source

PR736 LGP

Specification	Source figure
Dimensions and weight
Ground Clearance	1.8 ft
Height To Top Of Cab	10.8 ft
Length W/ Blade	19.11 ft
Width Over Tracks	10.2 ft
Length Of Track On Ground	10.7 ft
Length W/O Blade	14.6 ft
Undercarriage
Number Of Track Rollers Per Side	7
Standard Shoe Size	31.97 in
Number Of Carrier Rollers Per Side	2
Engine
Number Of Cylinders	4
Engine Model	D 934 A7 - Tier 4 Final
Gross Power	201.2 hp
Displacement	427.2 cu in
Operational
Operating Weight	54,234 lb
Fuel Capacity	113.6 gal
Cooling System Fluid Capacity	10.9 gal
Engine Oil Capacity	7.7 gal
Hydraulic Fluid Capacity	29.4 gal
Final Drives Fluid Capacity	7.1 gal
Transmission and speeds
Transmission Type	Variable hydrostatic travel drive
Max Speed - Forward	6.8 mph
Max Speed - Reverse	6.8 mph
Standard Blade
Blade width	13.3 ft
Blade height	4.1 in
Capacity	6.1 yd3
Cutting Depth	26.6 in
Additional specifications
Approximate First Year Of Manufacture	2014 A.D
Approximate Last Year Of Manufacture	2015 A.D
Blade Angle (Both Directions)	20 degrees

Source

PR736 LITRONIC

Specification	Source figure
Dimensions and weight
Ground Clearance	1.68 ft
Height To Top Of Cab	10.66 ft
Width Over Tracks	7.85 ft
Length Of Track On Ground	9.3 ft
Undercarriage
Number Of Track Rollers Per Side	7
Number Of Carrier Rollers Per Side	2
Track Shoe Width	24.02 in
Engine
Engine Model	D 934 A7 Emission regulations , EPA /CARB Tier 4f
Net Power	201.2 hp
Power Measured @	1,800 rpm
Aspiration	Turbochanged
Displacement	427.2 cu in
Starter	10.5 hp
Lubrication System	Pressurized lube system
Injection System	Direct fuel injection
Battery	2 x 180 Ah
Cooling System	Hydrostatic fan drive
Air Cleaner	Dry-type air cleaner
Max Power	234.7 hp
Operational
Operating Weight	54,234 lb
Fuel Capacity	113.6 gal
Cooling System Fluid Capacity	10.9 gal
Engine Oil Capacity	7.7 gal
Operating Voltage	24 V
Alternator Supplied Amperage	140 amps
Hydraulic Fluid Capacity	29.4 gal
Final Drives Fluid Capacity	5.9 gal
DEF Tank Capacity	13.3 gal
Transmission and speeds
Transmission Type	Infinitely variable hydrostatic travel drive, independent drive for each track
Max Speed - Reverse	2.5 mph
Steering	Hydrostatic
Hydraulic System
System Pressure	3,770 psi
Controls	Single joystick for all blade functions
Control Valve	2 segments, expandable to 4
Pump Type	Swash plate piston pump
Pump Flow Capacity	54.7 gpm
Filtration	Return filter with magnetic rod in the hydraulic tank
Standard Blade
Blade width	12 ft
Blade height	53.2 in
Capacity	6.2 yd3
Cutting Depth	26.8 in
Lifting Height	4.4 ft
Blade Pitch Adjustment	5 degrees
Maximum Blade Tilt	1.8 ft
Overall Length, Blade Straight	20 ft
Brakes
Parking Brake	Multi-disk brake, wear-free, automatically applied with neutral joystick position
Service Brake	Hydrostatic (self-locking), wear-free
Travel Control	Single joystick for all travel and steering functions. Optional: detented Joystick, with inching pedal
Additional specifications
Track Gauge	6.01 ft
Transport Width	10.7 ft
Blade Angle Adjustment	20 degrees
Overall Length, Blade Angled	21.9 ft
Hydraulic System	Load sensing (demand-controlled)

Source

PR742B L

Specification	Source figure
Dimensions and weight
Ground Clearance	1.59 ft
Height To Top Of Cab	10.85 ft
Length W/ Blade	18.95 ft
Width Over Tracks	8.8 ft
Length Of Track On Ground	10.75 ft
Length W/O Blade	14.11 ft
Undercarriage
Number Of Track Rollers Per Side	8
Ground Pressure	10.24 psi
Standard Shoe Size	20 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	234 hp
Power Measured @	1,800 rpm
Aspiration	Turbo-charged
Displacement	610 cu in
Operational
Operating Weight	52,500 lb
Fuel Capacity	118.9 gal
Cooling System Fluid Capacity	16.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	50 gal
Final Drives Fluid Capacity	6.1 gal
Transmission and speeds
Max Speed - Forward	6.8 mph
Max Speed - Reverse	4.9 mph
Number Of Forward Gears	3
Number Of Reverse Gears	2
Hydraulic System
Pump Type	Load sensing Proportional pump flow control
Pump Flow Capacity	77 gpm
Relief Valve Pressure	2,320 psi
Standard Blade
Blade width	13.1 ft
Blade height	57.1 in
Capacity	8.4 yd3
Cutting Depth	46.3 in
Additional specifications
Track Gauge	6.5 ft
Ground Contact Area	5,115 in2

Source

PR742B M

Specification	Source figure
Dimensions and weight
Ground Clearance	1.59 ft
Height To Top Of Cab	10.85 ft
Length W/ Blade	18.94 ft
Width Over Tracks	9.82 ft
Length Of Track On Ground	10.75 ft
Length W/O Blade	14.11 ft
Undercarriage
Number Of Track Rollers Per Side	8
Ground Pressure	6.54 psi
Standard Shoe Size	32 in
Engine
Number Of Cylinders	6
Engine Model	D 926 TI-E
Net Power	234 hp
Power Measured @	1,800 rpm
Aspiration	Turbo-charged
Displacement	610 cu in
Operational
Operating Weight	54,200 lb
Fuel Capacity	118.9 gal
Cooling System Fluid Capacity	16.4 gal
Engine Oil Capacity	5.9 gal
Operating Voltage	24 V
Alternator Supplied Amperage	55 amps
Hydraulic Fluid Capacity	50 gal
Final Drives Fluid Capacity	6.1 gal
Transmission and speeds
Max Speed - Forward	6.8 mph
Max Speed - Reverse	4.9 mph
Number Of Forward Gears	3
Number Of Reverse Gears	2
Hydraulic System
Pump Type	Load sensing proportional pump flow control
Pump Flow Capacity	77 gpm
Relief Valve Pressure	2,320 psi
Standard Blade
Blade width	14.8 ft
Blade height	53.2 in
Capacity	8.3 yd3
Cutting Depth	23.7 in
Additional specifications
Track Gauge	7.16 ft
Ground Contact Area	8,215 in2

Source

PR744 L

Specification	Source figure
Dimensions and weight
Ground Clearance	1.63 ft
Height To Top Of Cab	10.85 ft
Length W/ Blade	17.92 ft
Length Of Track On Ground	9.82 ft
Length W/O Blade	14.11 ft
Undercarriage
Ground Pressure	10.01 psi
Standard Shoe Size	24.02 in
Engine
Number Of Cylinders	6
Engine Model	D936-LA6
Power Measured @	1,800 rpm
Gross Power	246.8 hp
Displacement	640.8 cu in
Operational
Operating Weight	54,245 lb
Transmission and speeds
Transmission Type	Hydrostatic
Max Speed - Forward	6.9 mph
Max Speed - Reverse	6.9 mph
Number Of Forward Gears	2
Number Of Reverse Gears	2
Standard Blade
Blade width	13.1 ft
Blade height	57.1 in
Capacity	8.4 yd3
Cutting Depth	20.7 in
Additional specifications
Track Gauge	6.5 ft

Source

More in Liebherr: LR622B/PR712B, PR776 LITRONIC, PR716 LITRONIC/PR726 LITRONIC specs.

Liebherr LR614 and 16 related models specifications

History and service record of LR614 and 16 related models

Sources for this page

Liebherr LR614 and 16 related models: Configuration records