FieldSpec
Equipment menu

Machine models

Link-Belt 210X2 to 290X2 Long Front specifications

X2 excavators: identify the working front before choosing a chart

The original 210X2 sheet gives separate arm options and separate lift-chart headings for their boom, arm and bucket combinations. Reach and digging force change with that choice. A standard 210X2 chart is not a long-front chart merely because both machines carry 210 in their name.

LBX also separates normal relief pressure from Power-Boost conditions. Keep the operating mode with a quoted force or pressure. The sheet's fuel-use examples are duty-cycle illustrations, including how continuously the machine works; they are not a promised hourly burn for every job.

Its cab controls are described as pre-wired for auxiliary hydraulics. Pre-wiring and an auxiliary spool do not establish that a particular machine has the complete piping and control arrangement required by a breaker or other attachment. Inspect the fitted circuit before selecting the work mode.

Original210X2 specification LBX2172: arm/chart scope, boost conditions, fuel-example duty cycle and auxiliary preparation

240X2 changes the arm choices and travel controls

The 240X2 sheet offers short, standard and longer arms within the conventional-front arrangement. Its longest listed conventional arm must not be confused with the separate Long Front configuration in the historical table.

The manufacturer also describes single-pedal travel and automatic downshift. A speed change under changing travel load can therefore be a control function rather than a missing gear. The brochure distinguishes the travel motors' parking brakes from their counterbalance valves; those components serve different purposes.

Original240X2 specification: conventional arm alternatives and hydrostatic travel/downshift components

290X2 engine identity and service quantities are different again

The 290X2 document identifies a six-cylinder Isuzu 6HK1-family engine, rather than the four-cylinder 4HK1-family units in the 210X2 and 240X2 sheets. Keep the complete engine suffix with a fuel-system or replacement-parts enquiry.

Its hydraulic tank volume and complete system volume are separate capacities. Neither is pump discharge. The main-pump entries and pilot-pump entry describe different supplies, so a total assembled from every number is not automatically available at an attachment port.

The original 290X2 chart headings also specify bucket mass and whether boost is applied. Read the chart that matches the actual front and equipment; the earlier LX generation and the long-front records retain their own figures below rather than inheriting an X2 conventional-front rating.

Original290X2 LBX2167: six-cylinder engine, hydraulic tank/system/pump distinctions and lift-chart configurations
Entries in this reference
Listing-entry count
6
Short answer

Link-Belt 210X2 to 290X2 Long Front: full-size excavators.

Selected configuration figures
ConfigurationDocumented field and quantity
210X2
Net Power
157 hp
Operating Weight
47,400 lb
210X2 Long Front
Net Power
157 hp
Operating Weight
50,710 lb
240X2
Net Power
177 hp
Operating Weight
54,895 lb
240X2 Long Front
Net Power
177 hp
Operating Weight
61,729 lb
290X2
Net Power
207 hp
Operating Weight
65,700 lb
290X2 Long Front
Net Power
207 hp
Operating Weight
65,700 lb
210X2 to 290X2 Long Front specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
Link-Belt210X2 to 290X2 Long Front6210X2, 210X2 Long Front, 240X2, 240X2 Long Front, 290X2, and 290X2 Long Front
Boom/Stick Option (Hex) 1
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Shipping Length Of Unit30.84 ft40.92 ft32.58 ft47.18 ft34.29 ft49.58 ft
Shipping Height Of Unit9.95 ft9.85 ft10.34 ft10.27 ft10.7 ft11.09 ft
Max Cutting Height31.53 ft42.56 ft32.03 ft45.77 ft33.01 ft48.76 ft
Max Loading Height22.35 ft35.21 ft22.18 ft38.65 ft23.27 ft41.84 ft
Max Reach Along Ground31.93 ft50.83 ft33.14 ft59.78 ft34.45 ft60.24 ft
Max Digging Depth21.82 ft39.41 ft22.64 ft47.77 ft23.3 ft46.33 ft
Boom/Stick Option (Hex) 1Boom 18\\\'8\\\" (5700mm) / Stick 9\\\'8\\\" (2940mm)Boom 28\'7\" (8700mm) / Stick 21\'0\" (6400mm)Boom 19\'2\" (5850mm) / Stick 9\'10\" (2500mm)Boom 33\'10\" (10300mm) / Stick 26\'3\" (8000mm)Boom 20\'2\" (6150mm) / Stick 10\'5\" (3180mm)Boom 35\'10\" (10900mm) / Stick 25\'6\" (7770mm)
Specification210X2210X2 Long Front240X2240X2 Long Front290X2
Max Vertical Wall Digging Depth19.56 ft33.76 ft20.15 ft39.8 ft20.08 ft
Dimensions and weight
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Ground Clearance1.51 ft1.51 ft1.51 ft1.51 ft1.55 ft1.55 ft
Height To Top Of Cab9.95 ft9.65 ft10.14 ft9.85 ft10.41 ft10.41 ft
Width To Outside Of Tracks10.47 ft10.47 ft11.13 ft11.13 ft11.16 ft11.16 ft
Length Of Track On Ground12.01 ft12.01 ft12.6 ft12.6 ft13.06 ft13.06 ft
Tail Swing Radius8.93 ft8.93 ft9.65 ft9.65 ft10.34 ft10.34 ft
Removal Counterweight Clearance3.42 ft3.42 ft3.61 ft3.61 ft3.91 ft3.91 ft
Undercarriage
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Track Gauge7.85 ft7.85 ft8.5 ft8.5 ft8.54 ft8.54 ft
Shoe Size31.5 in31.5 in31.5 in31.5 in31.5 in31.5 in
Ground Pressure5.22 psi5.22 psi5.37 psi6.1 psi6.24 psi6.24 psi
Number Of Shoes Per Side494951515050
Number Of Carrier Rollers Per Side222222
Max Travel Speed3.5 mph3.5 mph3.4 mph3.4 mph3.5 mph3.5 mph
Number Of Track Rollers Per Side889999
Engine
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Number Of Cylinders444466
Engine ModelAI-4HK1XAH-4HK1XAH-4HK1XAH-4HK1XAH-6HK1XYSSAH-6HK1XYSS
Net Power157 hp157 hp177 hp177 hp207 hp207 hp
Power Measured @1,800 rpm1,800 rpm2,000 rpm2,000 rpm1,800 rpm1,800 rpm
Max Torque463 lb-ft463 lb-ft469 lb-ft469 lb-ft627 lb-ft627 lb-ft
Displacement317.4 cu in317.4 cu in317.4 cu in317.4 cu in476 cu in476 cu in
AspirationTurbochargedTurbochargedTurbochargedTurbochargedTurbocharged with IntercoolerTurbocharged with Intercooler
Torque Measured @1,500 rpm1,500 rpm1,500 rpm1,500 rpm1,500 rpm1,500 rpm
Operational
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Operating Weight47,400 lb50,710 lb54,895 lb61,729 lb65,700 lb65,700 lb
Fuel Capacity108.4 gal108.4 gal108.4 gal108.4 gal118.9 gal118.9 gal
Cooling System Fluid Capacity6.8 gal6.8 gal6.7 gal6.7 gal7.7 gal7.7 gal
Hydraulic System Fluid Capacity63.5 gal63.5 gal66.1 gal66.1 gal79.3 gal79.3 gal
Operating Voltage24 V24 V24 V24 V24 V24 V
Engine Oil Capacity6.2 gal6.2 gal6.2 gal6.2 gal10.1 gal10.1 gal
Swing Drive Fluid Capacity1.4 gal1.4 gal2.6 gal2.6 gal1.6 gal1.6 gal
Alternator Supplied Amperage50 amps50 amps50 amps50 amps50 amps50 amps
Hydraulic System Relief Valve Pressure4,970 psi4,970 psi4,970 psi4,970 psi4,970 psi4,970 psi
Hydraulic Pump Flow Capacity111.4 gpm111.4 gpm123.6 gpm123.6 gpm128.4 gpm128.4 gpm
Swing Mechanism
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Swing Speed11.5 rpm11.5 rpm10.7 rpm10.7 rpm10.2 rpm10.2 rpm
Swing Torque47,204 lb-ft38,500 lb-ft55,243 lb-ft51,480 lb-ft68,224 lb-ft68,224 lb-ft
Buckets
Specification210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Reference Bucket Capacity1.4 yd30.5 yd31.7 yd30.5 yd31.9 yd30.7 yd3
Minimum Bucket Capacity0.7 yd30.5 yd30.8 yd30.5 yd30.8 yd30.7 yd3
Maximum Bucket Capacity1.8 yd31 yd32.5 yd30.9 yd32.5 yd32.5 yd3
Variants — Source comparison annotation
Source guideDiffering-field count reported
210X2 to 290X2 Long Front38
Ratios
Figure210X2210X2 Long Front240X2240X2 Long Front290X2290X2 Long Front
Engine horsepower per 1,000 lb of weight3.33.13.22.93.23.2
Fuel tank per engine horsepower0.69 gal0.69 gal0.61 gal0.61 gal0.57 gal0.57 gal
Hydraulic power from the listed pump flow and relief pressure323.0 hp323.0 hp358.4 hp358.4 hp372.3 hp372.3 hp

210X2 to 290X2 Long Front: owner reports

Related account: “Shut-down in mid swing, and access to codes and manuals”; “Slow travel, sensor code and engine service questions”; “Starting, low power and injector calibration”: 210LX, 240LX, and 290LX.

210X2 to 290X2 Long Front: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumsfull-size excavatorLink-Belt and the 210X2, 240X2, 290 line that the 210X2, 210X2 Long Front, 240X2, 240X2 Long Front belongs to (no title names the exact model)14
Topics named by those titles
Title topicTitles
parts and manuals2
starting and cranking2
Topic in the titleThreadsShare of matching threads
parts and manuals214%
starting and cranking214%
210X2 to 290X2 Long Front: dated market and recall observations — Dated listing search
DateListing indexEquipment classNames queriedResult
2026-09-24MachineryTrader (machinerytrader.com)full-size excavator210X2, 210X2 Long Front, 240X2No matching offers in this snapshot
Dated CPSC search
DateDatabaseNames queriedResult
2026-09-24U.S. Consumer Product Safety CommissionLink-Belt; 210X2, 210X2 Long Front, 240X2No matching recall in the stated search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
Reference site
Reference site
Reference site
Reference site
Reference site
Forum threads
Federal agency data

Link-Belt 210X2 to 290X2 Long Front: Configuration records

210X2
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit30.84 ft
Shipping Height Of Unit9.95 ft
Max Cutting Height31.53 ft
Max Loading Height22.35 ft
Max Reach Along Ground31.93 ft
Max Vertical Wall Digging Depth19.56 ft
Max Digging Depth21.82 ft
Boom/Stick Option (Hex) 1Boom 18'8" (5700mm) / Stick 9'8" (2940mm)
Dimensions and weight
Ground Clearance1.51 ft
Height To Top Of Cab9.95 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.01 ft
Tail Swing Radius8.93 ft
Removal Counterweight Clearance3.42 ft
Undercarriage
Track Gauge7.85 ft
Shoe Size31.5 in
Ground Pressure5.22 psi
Number Of Shoes Per Side49
Number Of Carrier Rollers Per Side2
Max Travel Speed3.5 mph
Number Of Track Rollers Per Side8
Engine
Number Of Cylinders4
Engine ModelAI-4HK1X
Net Power157 hp
Power Measured @1,800 rpm
Max Torque463 lb-ft
Displacement317.4 cu in
AspirationTurbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight47,400 lb
Fuel Capacity108.4 gal
Cooling System Fluid Capacity6.8 gal
Hydraulic System Fluid Capacity63.5 gal
Operating Voltage24 V
Engine Oil Capacity6.2 gal
Swing Drive Fluid Capacity1.4 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity111.4 gpm
Swing Mechanism
Swing Speed11.5 rpm
Swing Torque47,204 lb-ft
Buckets
Reference Bucket Capacity1.4 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity1.8 yd3

Source

210X2 Long Front
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit40.92 ft
Shipping Height Of Unit9.85 ft
Max Cutting Height42.56 ft
Max Loading Height35.21 ft
Max Reach Along Ground50.83 ft
Max Vertical Wall Digging Depth33.76 ft
Max Digging Depth39.41 ft
Boom/Stick Option (Hex) 1Boom 28'7" (8700mm) / Stick 21'0" (6400mm)
Dimensions and weight
Ground Clearance1.51 ft
Height To Top Of Cab9.65 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.01 ft
Tail Swing Radius8.93 ft
Removal Counterweight Clearance3.42 ft
Undercarriage
Track Gauge7.85 ft
Shoe Size31.5 in
Ground Pressure5.22 psi
Number Of Shoes Per Side49
Number Of Carrier Rollers Per Side2
Max Travel Speed3.5 mph
Number Of Track Rollers Per Side8
Engine
Number Of Cylinders4
Engine ModelAH-4HK1X
Net Power157 hp
Power Measured @1,800 rpm
Max Torque463 lb-ft
Displacement317.4 cu in
AspirationTurbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight50,710 lb
Fuel Capacity108.4 gal
Cooling System Fluid Capacity6.8 gal
Hydraulic System Fluid Capacity63.5 gal
Operating Voltage24 V
Engine Oil Capacity6.2 gal
Swing Drive Fluid Capacity1.4 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity111.4 gpm
Swing Mechanism
Swing Speed11.5 rpm
Swing Torque38,500 lb-ft
Buckets
Reference Bucket Capacity0.5 yd3
Minimum Bucket Capacity0.5 yd3
Maximum Bucket Capacity1 yd3

Source

240X2
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit32.58 ft
Shipping Height Of Unit10.34 ft
Max Cutting Height32.03 ft
Max Loading Height22.18 ft
Max Reach Along Ground33.14 ft
Max Vertical Wall Digging Depth20.15 ft
Max Digging Depth22.64 ft
Boom/Stick Option (Hex) 1Boom 19'2" (5850mm) / Stick 9'10" (2500mm)
Dimensions and weight
Ground Clearance1.51 ft
Height To Top Of Cab10.14 ft
Width To Outside Of Tracks11.13 ft
Length Of Track On Ground12.6 ft
Tail Swing Radius9.65 ft
Removal Counterweight Clearance3.61 ft
Undercarriage
Track Gauge8.5 ft
Shoe Size31.5 in
Ground Pressure5.37 psi
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Max Travel Speed3.4 mph
Number Of Track Rollers Per Side9
Engine
Number Of Cylinders4
Engine ModelAH-4HK1X
Net Power177 hp
Power Measured @2,000 rpm
Max Torque469 lb-ft
Displacement317.4 cu in
AspirationTurbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight54,895 lb
Fuel Capacity108.4 gal
Cooling System Fluid Capacity6.7 gal
Hydraulic System Fluid Capacity66.1 gal
Operating Voltage24 V
Engine Oil Capacity6.2 gal
Swing Drive Fluid Capacity2.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity123.6 gpm
Swing Mechanism
Swing Speed10.7 rpm
Swing Torque55,243 lb-ft
Buckets
Reference Bucket Capacity1.7 yd3
Minimum Bucket Capacity0.8 yd3
Maximum Bucket Capacity2.5 yd3

Source

240X2 Long Front
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit47.18 ft
Shipping Height Of Unit10.27 ft
Max Cutting Height45.77 ft
Max Loading Height38.65 ft
Max Reach Along Ground59.78 ft
Max Vertical Wall Digging Depth39.8 ft
Max Digging Depth47.77 ft
Boom/Stick Option (Hex) 1Boom 33'10" (10300mm) / Stick 26'3" (8000mm)
Dimensions and weight
Ground Clearance1.51 ft
Height To Top Of Cab9.85 ft
Width To Outside Of Tracks11.13 ft
Length Of Track On Ground12.6 ft
Tail Swing Radius9.65 ft
Removal Counterweight Clearance3.61 ft
Undercarriage
Track Gauge8.5 ft
Shoe Size31.5 in
Ground Pressure6.1 psi
Number Of Shoes Per Side51
Number Of Carrier Rollers Per Side2
Max Travel Speed3.4 mph
Number Of Track Rollers Per Side9
Engine
Number Of Cylinders4
Engine ModelAH-4HK1X
Net Power177 hp
Power Measured @2,000 rpm
Max Torque469 lb-ft
Displacement317.4 cu in
AspirationTurbocharged
Torque Measured @1,500 rpm
Operational
Operating Weight61,729 lb
Fuel Capacity108.4 gal
Cooling System Fluid Capacity6.7 gal
Hydraulic System Fluid Capacity66.1 gal
Operating Voltage24 V
Engine Oil Capacity6.2 gal
Swing Drive Fluid Capacity2.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity123.6 gpm
Swing Mechanism
Swing Speed10.7 rpm
Swing Torque51,480 lb-ft
Buckets
Reference Bucket Capacity0.5 yd3
Minimum Bucket Capacity0.5 yd3
Maximum Bucket Capacity0.9 yd3

Source

290X2
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit34.29 ft
Shipping Height Of Unit10.7 ft
Max Cutting Height33.01 ft
Max Loading Height23.27 ft
Max Reach Along Ground34.45 ft
Max Vertical Wall Digging Depth20.08 ft
Max Digging Depth23.3 ft
Boom/Stick Option (Hex) 1Boom 20'2" (6150mm) / Stick 10'5" (3180mm)
Dimensions and weight
Ground Clearance1.55 ft
Height To Top Of Cab10.41 ft
Width To Outside Of Tracks11.16 ft
Length Of Track On Ground13.06 ft
Tail Swing Radius10.34 ft
Removal Counterweight Clearance3.91 ft
Undercarriage
Track Gauge8.54 ft
Shoe Size31.5 in
Ground Pressure6.24 psi
Number Of Shoes Per Side50
Number Of Carrier Rollers Per Side2
Max Travel Speed3.5 mph
Number Of Track Rollers Per Side9
Engine
Number Of Cylinders6
Engine ModelAH-6HK1XYSS
Net Power207 hp
Power Measured @1,800 rpm
Max Torque627 lb-ft
Displacement476 cu in
AspirationTurbocharged with Intercooler
Torque Measured @1,500 rpm
Operational
Operating Weight65,700 lb
Fuel Capacity118.9 gal
Cooling System Fluid Capacity7.7 gal
Hydraulic System Fluid Capacity79.3 gal
Operating Voltage24 V
Engine Oil Capacity10.1 gal
Swing Drive Fluid Capacity1.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity128.4 gpm
Swing Mechanism
Swing Speed10.2 rpm
Swing Torque68,224 lb-ft
Buckets
Reference Bucket Capacity1.9 yd3
Minimum Bucket Capacity0.8 yd3
Maximum Bucket Capacity2.5 yd3

Source

290X2 Long Front
SpecificationSource figure
Boom/Stick Option (Hex) 1
Shipping Length Of Unit49.58 ft
Shipping Height Of Unit11.09 ft
Max Cutting Height48.76 ft
Max Loading Height41.84 ft
Max Reach Along Ground60.24 ft
Max Digging Depth46.33 ft
Boom/Stick Option (Hex) 1Boom 35'10" (10900mm) / Stick 25'6" (7770mm)
Dimensions and weight
Ground Clearance1.55 ft
Height To Top Of Cab10.41 ft
Width To Outside Of Tracks11.16 ft
Length Of Track On Ground13.06 ft
Tail Swing Radius10.34 ft
Removal Counterweight Clearance3.91 ft
Undercarriage
Track Gauge8.54 ft
Shoe Size31.5 in
Ground Pressure6.24 psi
Number Of Shoes Per Side50
Number Of Carrier Rollers Per Side2
Max Travel Speed3.5 mph
Number Of Track Rollers Per Side9
Engine
Number Of Cylinders6
Engine ModelAH-6HK1XYSS
Net Power207 hp
Power Measured @1,800 rpm
Max Torque627 lb-ft
Displacement476 cu in
AspirationTurbocharged with Intercooler
Torque Measured @1,500 rpm
Operational
Operating Weight65,700 lb
Fuel Capacity118.9 gal
Cooling System Fluid Capacity7.7 gal
Hydraulic System Fluid Capacity79.3 gal
Operating Voltage24 V
Engine Oil Capacity10.1 gal
Swing Drive Fluid Capacity1.6 gal
Alternator Supplied Amperage50 amps
Hydraulic System Relief Valve Pressure4,970 psi
Hydraulic Pump Flow Capacity128.4 gpm
Swing Mechanism
Swing Speed10.2 rpm
Swing Torque68,224 lb-ft
Buckets
Reference Bucket Capacity0.7 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.5 yd3

Source

More in Link-Belt: 290LX Road Builder/3 related models specs, 210LX–3400 Quantum Long Front specs, 3900 Quantum/4300 Quantum specs.