Link-Belt model reference

The Link-Belt 2023 product guide identifies the TCC-1400 as a 140 US-ton class crane and lists 233300 lb operating weight for its reference configuration. It gives a six-section 42.4–195.4 ft main boom. Crane class, machine mass and boom length are different quantities.

TCC-1400 operating weight is not its lifting class

Radius and support setup select the chart entry

A headline capacity does not establish the allowed load at a particular boom length, radius or height. Use the exact counterweight, track position, boom mode, attachment and chart notes. For transport, account for which components remain installed and which travel separately.

The manufacturer’s RTC-80130 Series II reference specifies a 41.4–162 ft five-section main boom. That is a different arrangement from the TCC telescopic crawler and from the HSL lattice-boom models.

Historical LX, X2, Quantum, Road Builder and long-front excavator records also retain their own front equipment and mass. A logging or material-handler entry explicitly excluding an attachment must not stand for the complete machine-and-tool transport load.

RTC-80130 SII attachments change transport and lifting setup

The RTC-80130 SII product reference describes a pin-and-latch main boom, an available offsettable fly and optional lattice inserts. Its maximum tip height consequently describes an equipped arrangement, not the bare main boom. Inventory the fly and inserts supplied with a used crane before comparing reach or the cost of putting it to work.

Link-Belt also qualifies its transport statement with separately carried fall-off loads. Ask which components are on the carrier for the quoted journey, and which need another vehicle; do not transfer an assembled operating-mass figure into that transport statement. The manufacturer identifies independent hydraulic suspension and steering modes that reverse automatically when the upper is over the rear.

Those control details belong in an RTC familiarisation, while a TCC telescopic crawler needs a different undercarriage and setup comparison.

Sumitomo specifications · Kobelco specifications · Tractor and compact equipment models: Model directory

Link-Belt 138 HSL and 15 related models

ModelSelected specifications
138 HSL
Gross Power
270 hp
Width Of Shoes
35.9 in
Number Of Cylinders
6
Engine Make
Cummins
Engine Model
QSB6.7
248 HSL
Gross Power
270 hp
Operating Weight
349,711 lb
Transport Length
15.9 ft
Number Of Cylinders
6
Power Measured @
2,000 rpm
138 HYLAB5
Gross Power
181.1 hp
Min Height @ Max Raise Angle
40 ft
Number Of Cylinders
6
Engine Make
Mitsubishi
Engine Model
6D16-TLE2A
Link-Belt LS-208H
Net Power
263 hp
Width Of Shoes
35.9 in
Number Of Cylinders
6
Engine Make
Mitsubishi
Engine Model
6D24-TEB
218 HSL
Gross Power
270 hp
Operating Weight
190,058 lb
Max Height @ Max Raise Angle - No Jib
240 ft
Number Of Cylinders
6
Engine Make
Cummins QSB
228 HSL
Gross Power
270 hp
Operating Weight
235,041 lb
Min Height @ Max Raise Angle
45 ft
Number Of Cylinders
6
Engine Make
Cummins QSB
238 HSL
Gross Power
270 hp
Operating Weight
262,677 lb
Transport Length
26 ft
Number Of Cylinders
6
Engine Make
Cummins QSB
TCC-750
Gross Power
215 hp
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Make
Cummins QSB
Power Measured @
1,800 rpm
Link-Belt 298 SERIES 2
Gross Power
320 hp
Transport Height
14.4 ft
Number Of Cylinders
6
Engine Make
Cummins QSL
Power Measured @
1,800 rpm
Link-Belt TCC-500
Gross Power
320 hp
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Make
Cummins QSL
Power Measured @
1,800 rpm
Link-Belt TCC-1200
Gross Power
320 hp
Operating weight — 15 October 2024 manufacturer product guide configuration
lb
223000
kg
101151
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Model
Cummins QSL9
Link-Belt TCC-1400
Gross Power
320 hp
Operating weight — 15 October 2024 manufacturer product guide configuration
lb
233300
kg
105823
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Model
Cummins QSL
Link-Belt TCC-2500
Gross Power
320 hp
Operating weight — 15 October 2024 manufacturer product guide configuration
lb
401985
kg
182337
Width Of Shoes
39 in
Number Of Cylinders
6
Engine Model
Cummins QSL
Link-Belt TCC1100
Gross Power
320 hp
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Model
Cummins QSL
Power Measured @
1,800 rpm
LS-108C
Net Power
120 hp
Width Of Shoes
30 in
Number Of Cylinders
6
Engine Make
Isuzu
Engine Model
6SA1
LS-138H
Net Power
263 hp
Width Of Shoes
36 in
Number Of Cylinders
6
Engine Make
Isuzu
Engine Model
6SA1T

Link-Belt 210LX to 3400 Quantum Long Front

ModelSelected specifications
210LX
Net Power
138 hp
Operating Weight
44,800 lb
Hydraulic Pump Flow Capacity
106.2 gpm
Shipping Length Of Unit
30.81 ft
Shipping Height Of Unit
9.55 ft
210LX Long Front
Net Power
138 hp
Operating Weight
47,600 lb
Hydraulic Pump Flow Capacity
106.2 gpm
Shipping Length Of Unit
40.92 ft
Shipping Height Of Unit
9.85 ft
210LX Road Builder
Net Power
138 hp
Operating Weight
52,883 lb
Hydraulic Pump Flow Capacity
106.2 gpm
Shipping Length Of Unit
30.45 ft
Shipping Height Of Unit
10.65 ft
Link-Belt 225 Spin Ace
Net Power
138 hp
Operating Weight
51,376 lb
Hydraulic Pump Flow Capacity
100.4 gpm
Shipping Length Of Unit
29.04 ft
Shipping Height Of Unit
10.47 ft
Link-Belt 240LX
Net Power
162 hp
Operating Weight
52,700 lb
Hydraulic Pump Flow Capacity
112 gpm
Shipping Length Of Unit
32.42 ft
Shipping Height Of Unit
10.11 ft
240LX Long Front
Net Power
162 hp
Operating Weight
61,100 lb
Hydraulic Pump Flow Capacity
112 gpm
Shipping Length Of Unit
47.28 ft
Shipping Height Of Unit
10.18 ft
Link-Belt 240LX Road Builder
Net Power
162 hp
Operating Weight
66,509 lb
Hydraulic Pump Flow Capacity
112 gpm
Shipping Length Of Unit
32.04 ft
Shipping Height Of Unit
10.89 ft
Link-Belt 290LX
Net Power
177 hp
Operating Weight
64,400 lb
Hydraulic Pump Flow Capacity
116.8 gpm
Shipping Length Of Unit
34.16 ft
Shipping Height Of Unit
10.73 ft
2800 Quantum
Net Power
128 hp
Operating Weight
45,300 lb
Hydraulic Pump Flow Capacity
104 gpm
Shipping Length Of Unit
31.37 ft
Shipping Height Of Unit
10.04 ft
2800 Quantum Long Front
Net Power
128 hp
Operating Weight
47,190 lb
Hydraulic Pump Flow Capacity
104 gpm
Shipping Length Of Unit
39.05 ft
Shipping Height Of Unit
9.85 ft
3400 Quantum
Net Power
153 hp
Operating Weight
53,190 lb
Hydraulic Pump Flow Capacity
110 gpm
Shipping Length Of Unit
33.01 ft
Shipping Height Of Unit
10.6 ft
3400 Quantum Long Front
Net Power
153 hp
Operating Weight
61,300 lb
Hydraulic Pump Flow Capacity
110 gpm
Shipping Length Of Unit
47.58 ft
Shipping Height Of Unit
10.21 ft
210X2
Net Power
157 hp
Operating Weight
47,400 lb
Hydraulic Pump Flow Capacity
111.4 gpm
Shipping Length Of Unit
30.84 ft
Shipping Height Of Unit
9.95 ft
210X2 Long Front
Net Power
157 hp
Operating Weight
50,710 lb
Hydraulic Pump Flow Capacity
111.4 gpm
Shipping Length Of Unit
40.92 ft
Shipping Height Of Unit
9.85 ft
Link-Belt 240X2
Net Power
177 hp
Operating Weight
54,895 lb
Hydraulic Pump Flow Capacity
123.6 gpm
Shipping Length Of Unit
32.58 ft
Shipping Height Of Unit
10.34 ft
240X2 Long Front
Net Power
177 hp
Operating Weight
61,729 lb
Hydraulic Pump Flow Capacity
123.6 gpm
Shipping Length Of Unit
47.18 ft
Shipping Height Of Unit
10.27 ft
290X2
Net Power
207 hp
Operating Weight
65,700 lb
Hydraulic Pump Flow Capacity
128.4 gpm
Shipping Length Of Unit
34.29 ft
Shipping Height Of Unit
10.7 ft
290X2 Long Front
Net Power
207 hp
Operating Weight
65,700 lb
Hydraulic Pump Flow Capacity
128.4 gpm
Shipping Length Of Unit
49.58 ft
Shipping Height Of Unit
11.09 ft

Buying and ownership: Link-Belt 210LX to 3400 Quantum Long Front

Link-Belt 210LX to 370LX

ModelSelected specifications
210LX
Net Power
138 hp
Operating Weight
59,013 lb
Pump Flow Capacity
106.2 gpm
Shipping Length
42.91 ft
Shipping Height
10.71 ft
240LX
Net Power
162 hp
Operating Weight
74,794 lb
Pump Flow Capacity
112 gpm
Overall Width
11.96 ft
Length Of Track On Ground
12.83 ft
290LX
Net Power
177 hp
Operating Weight
79,402 lb
Pump Flow Capacity
116.8 gpm
Shipping Length
48.54 ft
Shipping Height
11.06 ft
370LX
Net Power
247 hp
Operating Weight
107,231 lb
Pump Flow Capacity
150 gpm
Shipping Length
54.22 ft
Shipping Height
11.47 ft

Link-Belt 240X2 to 6000 Quantum

ModelSelected specifications
240X2
Net Power
177 hp
Operating Weight W/O Attachment
67,682 lb
Max Height
41.44 ft
Max Reach Along Ground
37.47 ft
Max Depth
12.01 ft
370LX
Net Power
247 hp
Operating Weight W/O Attachment
99,045 lb
Max Height
55 ft
Max Reach Along Ground
49 ft
Max Depth
20 ft
370LX Tier III
Net Power
271 hp
Max Height
55 ft
Max Reach Along Ground
49 ft
Max Depth
20 ft
Boom/Stick Option (Mat) 1
50'0" 2 Piece Boom
4300 Quantum
Net Power
240 hp
Operating Weight W/O Attachment
91,040 lb
Max Height
50 ft
Max Reach Along Ground
45 ft
Max Depth
17 ft
6000 Quantum
Net Power
300 hp
Operating Weight W/O Attachment
123,108 lb
Max Height
58 ft
Max Reach Along Ground
54 ft
Max Depth
22 ft
600LX
Net Power
316 hp
Operating Weight W/O Attachment
119,340 lb
Max Height
60 ft
Max Reach Along Ground
54.5 ft
Max Depth
23 ft
700LX
Net Power
425 hp
Operating Weight W/O Attachment
147,880 lb
Max Height
60 ft
Max Reach Along Ground
54 ft
Max Depth
20 ft

Link-Belt 290LX Road Builder and 3 related models

ModelSelected specifications
290LX Road Builder
Net Power
177 hp
Operating Weight
71,266 lb
Hydraulic Pump Flow Capacity
116.8 gpm
Shipping Length Of Unit
32.93 ft
Shipping Height Of Unit
11 ft
Link-Belt 330LX
Net Power
247 hp
Operating Weight
78,000 lb
Hydraulic Pump Flow Capacity
150 gpm
Shipping Length Of Unit
36.23 ft
Shipping Height Of Unit
10.8 ft
370LX Road Builder
Net Power
247 hp
Operating Weight
97,891 lb
Hydraulic Pump Flow Capacity
150 gpm
Shipping Length Of Unit
36.26 ft
Shipping Height Of Unit
11.41 ft
4300 Quantum Road Builder
Net Power
240 hp
Operating Weight
83,304 lb
Hydraulic Pump Flow Capacity
142 gpm
Shipping Length Of Unit
35.83 ft
Shipping Height Of Unit
11.19 ft

Link-Belt 330LX Tier 3 and 9 related models

ModelSelected specifications
3900 Quantum
Net Power
178 hp
Operating Weight
62,900 lb
Hydraulic Pump Flow Capacity
112 gpm
Shipping Length Of Unit
32.88 ft
Shipping Height Of Unit
10.93 ft
4300 Quantum
Net Power
240 hp
Operating Weight
73,570 lb
Hydraulic Pump Flow Capacity
142 gpm
Shipping Length Of Unit
36 ft
Shipping Height Of Unit
11.65 ft
330LX Tier 3
Net Power
271 hp
Operating Weight
78,500 lb
Hydraulic Pump Flow Capacity
150 gpm
Shipping Length Of Unit
36.26 ft
Shipping Height Of Unit
10.8 ft
350X2
Net Power
271 hp
Operating Weight
79,146 lb
Hydraulic Pump Flow Capacity
153.2 gpm
Shipping Length Of Unit
36.26 ft
Shipping Height Of Unit
10.7 ft
350X3
Net Power
266 hp
Operating Weight
80,028 lb
Height To Top Of Cab
10.41 ft
Ground Clearance
1.58 ft
Width To Outside Of Tracks
11.16 ft
460LX
Net Power
316 hp
Operating Weight
101,200 lb
Hydraulic Pump Flow Capacity
190.2 gpm
Shipping Length Of Unit
39.34 ft
Shipping Height Of Unit
11.95 ft
5800 Quantum
Net Power
300 hp
Operating Weight
99,800 lb
Hydraulic Pump Flow Capacity
180 gpm
Shipping Length Of Unit
39.38 ft
Shipping Height Of Unit
11.65 ft
700LX
Net Power
425 hp
Operating Weight
153,300 lb
Hydraulic Pump Flow Capacity
232.4 gpm
Shipping Length Of Unit
43.48 ft
Shipping Height Of Unit
14.34 ft
800LX
Net Power
444 hp
Operating Weight
174,600 lb
Hydraulic Pump Flow Capacity
264.2 gpm
Shipping Length Of Unit
46.4 ft
Shipping Height Of Unit
15.79 ft
8000 Quantum
Net Power
438 hp
Operating Weight
176,400 lb
Hydraulic Pump Flow Capacity
264.2 gpm
Shipping Length Of Unit
42.69 ft
Shipping Height Of Unit
16.57 ft

Link-Belt 75 RT and 15 related models

ModelSelected specifications
RTC-80130 SERIES II
Gross Power
345 hp
Operating Weight
132,169 lb
Transport Length
50.6 ft
Max Elevating Angle
80 degrees
Max Operating Radius
161.75 ft
RTC-80160 SERIES II
Gross Power
345 hp
Operating Weight
143,199 lb
Transport Length
50.43 ft
Max Elevating Angle
80 degrees
Max Operating Radius
195.21 ft
Link-Belt 75 RT
Gross Power
270 hp
Operating Weight
92,995 lb
Transport Length
47.25 ft
Min Operating Radius
7.55 ft
Max Elevating Angle
80 degrees
Link-Belt 110 RT
Gross Power
270 hp
Operating Weight
87,535 lb
Transport Length
47.64 ft
Min Operating Radius
7.16 ft
Max Elevating Angle
80 degrees
RTC8080 Series II
Gross Power
270 hp
Operating Weight
81,126 lb
Max Lift Capacity
160,000 lb
Max Height @ Max Raise Angle - No Jib
149.61 ft
Min Operating Radius
10 ft
RTC8090 Series II
Gross Power
270 hp
Operating Weight
80,680 lb
Max Lift Capacity
180,000 lb
Max Height @ Max Raise Angle - No Jib
149.61 ft
Min Operating Radius
8 ft
HSP-15
Gross Power
136 hp
Operating Weight
42,484 lb
Max Height @ Max Raise Angle - No Jib
60.01 ft
Swing Speed
3 rpm
Min Height @ Max Raise Angle
25 ft
HSP-18
Gross Power
136 hp
Operating Weight
42,485 lb
Max Height @ Max Raise Angle - No Jib
60.01 ft
Swing Speed
3 rpm
Min Height @ Max Raise Angle
25 ft
HSP-22
Gross Power
136 hp
Max Height @ Max Raise Angle - No Jib
70.02 ft
Swing Speed
3 rpm
Min Height @ Max Raise Angle
28.52 ft
Number Of Sections
3
HSP-8018
Gross Power
130 hp
Operating Weight
45,989 lb
Max Height @ Max Raise Angle - No Jib
70.25 ft
Max Elevating Angle
80 degrees
Swing Speed
3 rpm
HSP-8022
Gross Power
130 hp
Operating Weight
45,989 lb
Max Height @ Max Raise Angle - No Jib
70.25 ft
Max Elevating Angle
80 degrees
Swing Speed
3 rpm
HSP-8028S
Gross Power
130 hp
Operating Weight
45,989 lb
Max Height @ Max Raise Angle - No Jib
70.25 ft
Max Elevating Angle
80 degrees
Swing Speed
3 rpm
HSP-8010
Gross Power
205 hp
Max Height @ Max Raise Angle - No Jib
85.01 ft
Max Elevating Angle
78 degrees
Swing Speed
2.46 rpm
Min Height @ Max Raise Angle
35.01 ft
HSP-8040
Gross Power
205 hp
Operating Weight
75,054 lb
Max Height @ Max Raise Angle - No Jib
85.01 ft
Max Elevating Angle
78 degrees
Swing Speed
2.46 rpm
HSP-8050
Gross Power
205 hp
Max Height @ Max Raise Angle - No Jib
85.01 ft
Max Elevating Angle
78 degrees
Swing Speed
2.46 rpm
Min Height @ Max Raise Angle
35.01 ft
HSP-8060
Gross Power
205 hp
Operating Weight
75,054 lb
Max Height @ Max Raise Angle - No Jib
110.01 ft
Max Elevating Angle
78 degrees
Swing Speed
2.46 rpm

Link-Belt 75 Spin Ace to 2700 Quantum

ModelSelected specifications
75 Spin Ace
Net Power
52 hp
Operating Weight
16,900 lb
Hydraulic Pump Flow Capacity
37.8 gpm
Shipping Length Of Unit
19.43 ft
Shipping Height Of Unit
8.86 ft
80 Spin Ace
Net Power
52 hp
Operating Weight
18,400 lb
Hydraulic Pump Flow Capacity
37.8 gpm
Shipping Length Of Unit
21.76 ft
Shipping Height Of Unit
8.86 ft
80 Spin Ace Tier III
Net Power
54 hp
Operating Weight
18,585 lb
Hydraulic Pump Flow Capacity
36 gpm
Shipping Length Of Unit
21.82 ft
Shipping Height Of Unit
8.86 ft
1600 Quantum
Net Power
54 hp
Operating Weight
15,432 lb
Hydraulic Pump Flow Capacity
40 gpm
Shipping Length Of Unit
19.72 ft
Shipping Height Of Unit
8.67 ft
130LX
Net Power
89 hp
Operating Weight
27,100 lb
Hydraulic Pump Flow Capacity
64.8 gpm
Shipping Length Of Unit
24.58 ft
Shipping Height Of Unit
8.99 ft
Link-Belt 130X2
Net Power
95 hp
Operating Weight
28,440 lb
Hydraulic Pump Flow Capacity
68.2 gpm
Shipping Length Of Unit
25 ft
Shipping Height Of Unit
9.45 ft
Link-Belt 130X2LC
Net Power
95 hp
Operating Weight
28,440 lb
Hydraulic Pump Flow Capacity
68.2 gpm
Shipping Length Of Unit
25 ft
Shipping Height Of Unit
9.45 ft
Link-Belt 135 Spin Ace
Net Power
88 hp
Operating Weight
29,100 lb
Hydraulic Pump Flow Capacity
61.8 gpm
Shipping Length Of Unit
23.76 ft
Shipping Height Of Unit
9.03 ft
Link-Belt 160LX
Net Power
101 hp
Operating Weight
36,200 lb
Hydraulic Pump Flow Capacity
72.4 gpm
Shipping Length Of Unit
27.56 ft
Shipping Height Of Unit
9.68 ft
Link-Belt 160X2
Net Power
120 hp
Operating Weight
37,700 lb
Hydraulic Pump Flow Capacity
75 gpm
Shipping Length Of Unit
27.7 ft
Shipping Height Of Unit
9.91 ft
2650 Quantum
Net Power
85 hp
Operating Weight
28,400 lb
Hydraulic Pump Flow Capacity
64 gpm
Shipping Length Of Unit
24.94 ft
Shipping Height Of Unit
9.09 ft
2700 Quantum
Net Power
100 hp
Operating Weight
35,240 lb
Hydraulic Pump Flow Capacity
72 gpm
Shipping Length Of Unit
27.27 ft
Shipping Height Of Unit
9.55 ft

Buying and ownership: Link-Belt 75 Spin Ace to 2700 Quantum

Link-Belt ATC-3210 and 5 related models

ModelSelected specifications
Link-Belt ATC3130
Gross Power
173 hp
Operating Weight
108,233 lb
Max Lift Capacity
260,000 lb
Min Height @ Max Raise Angle
53.15 ft
Max Height @ Max Raise Angle - No Jib
180.45 ft
Link-Belt ATC3200
Gross Power
185 hp
Operating Weight
127,983 lb
Max Lift Capacity
400,000 lb
Min Height @ Max Raise Angle
55.45 ft
Max Height @ Max Raise Angle - No Jib
208.34 ft
Link-Belt ATC3250
Gross Power
185 hp
Operating Weight
136,339 lb
Max Lift Capacity
500,000 lb
Min Height @ Max Raise Angle
55.78 ft
Max Height @ Max Raise Angle - No Jib
234.59 ft
ATC-3210
Gross Power
550 hp
Hydraulic Pump Flow Capacity
66 gpm
Min Height @ Max Raise Angle
104.1 ft
Max Height @ Max Raise Angle - No Jib
210.9 ft
Max Elevating Angle
82.5 degrees
ATC-3275
Gross Power
550 hp
Hydraulic Pump Flow Capacity
66 gpm
Min Height @ Max Raise Angle
102.8 ft
Max Height @ Max Raise Angle - No Jib
234.1 ft
Max Elevating Angle
83 degrees
Link-Belt ATC822
Gross Power
230 hp
Operating Weight
39,223 lb
Min Height @ Max Raise Angle
27.14 ft
Max Height @ Max Raise Angle - No Jib
70.12 ft
Max Elevating Angle
78 degrees

Buying and ownership: Link-Belt ATC-3210 and 5 related models

Link-Belt D16 to E30

ModelSelected specifications
D16
Gross Power
137 hp
Overall Length
23.45 ft
Overall Width
8.21 ft
Overall Height
10.7 ft
Wheelbase
13.13 ft
D25
Gross Power
255 hp
Overall Length
30.58 ft
Overall Width
8.77 ft
Overall Height
11.19 ft
Wheelbase
18.36 ft
Link-Belt D30
Gross Power
270 hp
Overall Length
31.15 ft
Overall Width
9.39 ft
Overall Height
11.36 ft
Wheelbase
18.32 ft
Link-Belt D300
Gross Power
300 hp
Overall Length
31.53 ft
Overall Width
9.17 ft
Overall Height
11.54 ft
Wheelbase
17.01 ft
E30
Gross Power
270 hp
Overall Length
32.02 ft
Overall Width
9.39 ft
Overall Height
11 ft
Wheelbase
17.91 ft

Link-Belt HSP-8030 and 13 related models

ModelSelected specifications
RTC-80110 SERIES II
Gross Power
345 hp
Operating Weight
129,974 lb
Transport Length
47.45 ft
Max Elevating Angle
80.75 degrees
Transport Width
9.91 ft
RTC8030 Series II
Gross Power
156 hp
Operating Weight
55,526 lb
Max Lift Capacity
60,000 lb
Min Height @ Max Raise Angle
37 ft
Max Elevating Angle
78 degrees
Link-Belt RTC8040
Gross Power
156 hp
Min Height @ Max Raise Angle
32.81 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
104.99 ft
Min Operating Radius
10 ft
RTC8040 Series II
Gross Power
165 hp
Min Height @ Max Raise Angle
32.81 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
104.99 ft
Min Operating Radius
10 ft
RTC8060
Gross Power
225 hp
Operating Weight
83,483 lb
Min Height @ Max Raise Angle
35.5 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
110.01 ft
RTC8050 Series II
Gross Power
195 hp
Operating Weight
74,660 lb
Max Lift Capacity
100,000 lb
Min Height @ Max Raise Angle
43 ft
Max Elevating Angle
78 degrees
Link-Belt RTC8065
Gross Power
270 hp
Max Lift Capacity
130,000 lb
Min Height @ Max Raise Angle
38 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
115 ft
RTC8065 Series II
Gross Power
270 hp
Operating Weight
84,891 lb
Max Lift Capacity
130,000 lb
Min Height @ Max Raise Angle
48 ft
Max Elevating Angle
78 degrees
RTC8075
Net Power
235 hp
Operating Weight
94,449 lb
Max Lift Capacity
150,000 lb
Min Height @ Max Raise Angle
49 ft
Max Elevating Angle
78 degrees
HSP-8030
Gross Power
152 hp
Operating Weight
52,272 lb
Min Height @ Max Raise Angle
31.99 ft
Max Elevating Angle
80 degrees
Max Height @ Max Raise Angle - No Jib
79.99 ft
Link-Belt RTC8022
Gross Power
110 hp
Operating Weight
36,138 lb
Min Height @ Max Raise Angle
27.14 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
70.12 ft
Link-Belt RTC8030
Gross Power
152 hp
Operating Weight
52,067 lb
Min Height @ Max Raise Angle
28.75 ft
Max Elevating Angle
79.91 degrees
Max Height @ Max Raise Angle - No Jib
70.25 ft
Link-Belt RTC8035
Gross Power
152 hp
Operating Weight
57,783 lb
Min Height @ Max Raise Angle
28.75 ft
Max Elevating Angle
79.91 degrees
Max Height @ Max Raise Angle - No Jib
91.02 ft
RTC8050
Gross Power
210 hp
Min Height @ Max Raise Angle
35.5 ft
Max Elevating Angle
78 degrees
Max Height @ Max Raise Angle - No Jib
110.01 ft
Swing Speed
2.6 rpm

Link-Belt HTC-50W and 17 related models

ModelSelected specifications
HTC-8640 SL
Operating Weight
65,652 lb
Max Lift Capacity
80,000 lb
Min Height @ Max Raise Angle
50.86 ft
Max Height @ Max Raise Angle - No Jib
144.69 ft
Min Working Radius
10 ft
HTC-8660 SERIES II
Min Height @ Max Raise Angle
50.86 ft
Max Height @ Max Raise Angle - No Jib
144.69 ft
Min Working Radius
10 ft
Max Working Radius
90 ft
Max Elevating Angle
78 degrees
HTC-8675 SERIES II
Min Height @ Max Raise Angle
50.86 ft
Max Height @ Max Raise Angle - No Jib
144.69 ft
Min Working Radius
10 ft
Max Working Radius
90 ft
Max Elevating Angle
78 degrees
Link-Belt HTC8640
Gross Power
365 hp
Operating Weight
65,605 lb
Max Lift Capacity
80,000 lb
Min Height @ Max Raise Angle
42 ft
Max Height @ Max Raise Angle - No Jib
117.46 ft
HTC8660
Gross Power
365 hp
Operating Weight
65,605 lb
Max Lift Capacity
120,000 lb
Min Height @ Max Raise Angle
43 ft
Max Height @ Max Raise Angle - No Jib
117.46 ft
HTC-50W
Gross Power
238 hp
Operating Weight
66,683 lb
Min Height @ Max Raise Angle
35.01 ft
Max Height @ Max Raise Angle - No Jib
90 ft
Max Elevating Angle
75 degrees
HTC-840
Gross Power
234 hp
Operating Weight
62,100 lb
Min Height @ Max Raise Angle
35.01 ft
Max Height @ Max Raise Angle - No Jib
85.01 ft
Max Elevating Angle
78 degrees
HTC-860
Gross Power
234 hp
Operating Weight
65,711 lb
Min Height @ Max Raise Angle
35.01 ft
Max Height @ Max Raise Angle - No Jib
110.01 ft
Max Elevating Angle
78 degrees
HTC-1040
Gross Power
240 hp
Operating Weight
60,424 lb
Min Height @ Max Raise Angle
35.01 ft
Max Height @ Max Raise Angle - No Jib
85.01 ft
Max Elevating Angle
78 degrees
HTC-1060
Gross Power
240 hp
Operating Weight
66,286 lb
Min Height @ Max Raise Angle
38 ft
Max Height @ Max Raise Angle - No Jib
120.51 ft
Max Elevating Angle
78 degrees
Link-Belt HTC25
Gross Power
216 hp
Operating Weight
45,625 lb
Transport Length
33.99 ft
Swing Speed
3.5 rpm
Transport Width
7.98 ft
Link-Belt HTC35
Gross Power
216 hp
Operating Weight
60,883 lb
Min Height @ Max Raise Angle
31.99 ft
Max Height @ Max Raise Angle - No Jib
79.99 ft
Swing Speed
2.5 rpm
HTC-1170
Gross Power
310 hp
Operating Weight
96,880 lb
Min Height @ Max Raise Angle
38 ft
Max Height @ Max Raise Angle - No Jib
120.51 ft
Number Of Sections
4
HTC8670
Gross Power
365 hp
Operating Weight
139,994 lb
Min Height @ Max Raise Angle
38 ft
Max Height @ Max Raise Angle - No Jib
115 ft
Max Elevating Angle
78 degrees
HTC8670 LB
Gross Power
365 hp
Operating Weight
77,614 lb
Min Height @ Max Raise Angle
41.02 ft
Max Height @ Max Raise Angle - No Jib
127.01 ft
Max Elevating Angle
78 degrees
HTC-3140
Gross Power
250 hp
Operating Weight
104,581 lb
Hydraulic Pump Flow Capacity
41 gpm
Min Height @ Max Raise Angle
96 ft
Max Height @ Max Raise Angle - No Jib
171 ft
HTC-3140 LB
Gross Power
250 hp
Operating Weight
109,905 lb
Hydraulic Pump Flow Capacity
41 gpm
Min Height @ Max Raise Angle
113 ft
Max Height @ Max Raise Angle - No Jib
204 ft
Link-Belt HTC11100
Gross Power
430.5 hp
Operating Weight
112,233 lb
Min Height @ Max Raise Angle
37.01 ft
Max Height @ Max Raise Angle - No Jib
115 ft
Max Elevating Angle
80 degrees

Buying and ownership: Link-Belt HTC-50W and 17 related models

Link-Belt HTC-8690 LB to HTT-86110

ModelSelected specifications
HTC-8690 LB
Gross Power
450 hp
Hydraulic Pump Flow Capacity
144 gpm
Min Height @ Max Raise Angle
99 ft
Max Height @ Max Raise Angle - No Jib
173 ft
Max Elevating Angle
80 degrees
Link-Belt HTC8665
Gross Power
325 hp
Transport Length
43.08 ft
Number Of Sections
4
Swing Speed
2 rpm
Transport Width
7.75 ft
Link-Belt HTC8675
Gross Power
445 hp
Operating Weight
74,320 lb
Max Lift Capacity
124,900 lb
Min Height @ Max Raise Angle
50 ft
Max Height @ Max Raise Angle - No Jib
136 ft
Link-Belt HTC8690
Gross Power
480 hp
Operating Weight
79,533 lb
Max Lift Capacity
164,400 lb
Min Height @ Max Raise Angle
47 ft
Max Height @ Max Raise Angle - No Jib
147.97 ft
HTT-8675 SERIES II
Gross Power
414 hp
Min Height @ Max Raise Angle
86 ft
Max Height @ Max Raise Angle - No Jib
136 ft
Max Elevating Angle
80 degrees
Number Of Sections
4
HTC-86110
Gross Power
450 hp
Hydraulic Pump Flow Capacity
188 gpm
Min Height @ Max Raise Angle
99 ft
Max Height @ Max Raise Angle - No Jib
173 ft
Max Elevating Angle
80 degrees
Link-Belt HTC86100
Gross Power
450 hp
Operating Weight
83,505 lb
Hydraulic Pump Flow Capacity
188 gpm
Min Height @ Max Raise Angle
99 ft
Max Height @ Max Raise Angle - No Jib
173 ft
Link-Belt HTT-86100
Gross Power
414 hp
Min Height @ Max Raise Angle
84 ft
Max Height @ Max Raise Angle - No Jib
148 ft
Max Elevating Angle
80 degrees
Number Of Sections
5
Link-Belt HTT-86110
Gross Power
414 hp
Min Height @ Max Raise Angle
99 ft
Max Height @ Max Raise Angle - No Jib
173 ft
Max Elevating Angle
80 degrees
Number Of Sections
6

Buying and ownership: Link-Belt HTC-8690 LB to HTT-86110

Link-Belt L120 to L130

ModelSelected specifications
L120
Net Power
106 hp
Operating Weight
20,507 lb
Pump Flow Capacity
32 gpm
Length With Bucket On Ground
21.5 ft
Dump Clearance At Max Raise
9.17 ft
L125
Net Power
130 hp
Operating Weight
24,912 lb
Pump Flow Capacity
32 gpm
Length With Bucket On Ground
22.26 ft
Dump Clearance At Max Raise
9.51 ft
L130
Net Power
166 hp
Operating Weight
30,305 lb
Pump Flow Capacity
55 gpm
Length With Bucket On Ground
24.51 ft
Dump Clearance At Max Raise
9.34 ft

Link-Belt LS-78 to LS-518

ModelSelected specifications
Link-Belt LS-78
Net Power
84 hp
Operating Weight
50,561 lb
Width Of Shoes
24 in
Number Of Cylinders
3
Engine Model
GM 3-71N
Link-Belt LS-98
Net Power
110 hp
Operating Weight
60,427 lb
Width Of Shoes
24.1 in
Number Of Cylinders
4
Engine Model
GM 4-71N
Link-Belt LS-108B
Net Power
110 hp
Width Of Shoes
24.1 in
Number Of Cylinders
4
Engine Model
GM4-71N
Power Measured @
1,840 rpm
Link-Belt LS-118
Net Power
178 hp
Width Of Shoes
30 in
Number Of Cylinders
6
Engine Model
GM6-71N
Power Measured @
2,100 rpm
Link-Belt LS-318
Net Power
171 hp
Width Of Shoes
17 in
Number Of Cylinders
6
Engine Model
GM 6-71N
Power Measured @
1,915 rpm
Link-Belt LS-338
Net Power
171 hp
Width Of Shoes
38 in
Number Of Cylinders
6
Engine Model
GM6-71N
Power Measured @
1,915 rpm
Link-Belt LS-418A
Net Power
190 hp
Width Of Shoes
38.2 in
Number Of Cylinders
6
Engine Model
GM 6-71N
Power Measured @
2,060 rpm
LS-518
Net Power
245.5 hp
Width Of Shoes
44 in
Number Of Cylinders
8
Engine Model
GM 8V-71N
Power Measured @
2,100 rpm
Link-Belt LS-218H
Net Power
263 hp
Width Of Shoes
35.9 in
Number Of Cylinders
6
Engine Model
6D24-TEB
Power Measured @
2,000 rpm
Link-Belt LS-248H
Net Power
237 hp
Width Of Shoes
44.1 in
Number Of Cylinders
6
Engine Model
6SD1TPB-01
Power Measured @
2,400 rpm

Buying and ownership: Link-Belt LS-78 to LS-518

Link-Belt RTC80100 and RTC80100 Series II

ModelSelected specifications
RTC80100
Net Power
330 hp
Operating Weight
123,000 lb
Max Lift Capacity
200,000 lb
Min Height @ Max Raise Angle
40 ft
Max Height @ Max Raise Angle - No Jib
150 ft
RTC80100 Series II
Gross Power
330 hp
Operating Weight
126,560 lb
Max Lift Capacity
200,000 lb
Min Height @ Max Raise Angle
50 ft
Max Height @ Max Raise Angle - No Jib
159.45 ft

Link-Belt model reference: Owner and mechanic accounts

Slow travel, sensor code and engine service questions.

  • Slow travel, sensor code and engine service questions. A 2007 240X2 with slow track speed and a pump sensor code 7001 that shut the machine off, an owner asking about lifting a heavy item with a 240 XL, and a 2006 240 LX owner asking about the Isuzu engine's service items. Threads read: 1, 2, 3.

Starting, low power and injector calibration.

  • Starting, low power and injector calibration. A 290 LX with intermittent starter engagement, a 2006 290 LX that lacked power on the crowd arm (a reply said to check the common things and to confirm at least 10 psi at the primer pump), and a 290 LX with a crank-no-start code where a reply said the controller and injectors must be calibrated together. Threads read: 1, 2, 3.