Machine models
Mustang MTL25 specifications
| Listing-entry count |
|---|
| 1 |
Short answer
Mustang MTL25: tracked compact loader.
| Configuration | Documented field and quantity |
|---|---|
| MTL25 |
|
| Specification | MTL25 |
|---|---|
| Width Over Tracks | 6.05 ft |
| Height To Top Of Cab | 7.28 ft |
| Ground Clearance | 14.3 in |
| Clearance At Max Lift And Dump | 7.8 ft |
| Reach At Max Lift And Dump | 3.42 ft |
| Turning Radius From Center - Machine Rear | 71.5 in |
| Length With Bucket | 13.21 ft |
| Turning Radius From Center - Inc Bucket | 105.99 in |
| Length With Out Bucket | 10.17 ft |
| Specification | MTL25 |
|---|---|
| Length Of Track On Ground | 5.25 ft |
| Track Gauge | 4.56 ft |
| Ground Contact Area | 1,132 in2 |
| Number Of Track Rollers Per Side | 5 |
| Width Of Track | 18 in |
| Ground Pressure | 4.3 psi |
| Specification | MTL25 |
|---|---|
| Number Of Cylinders | 4 |
| Engine Model | 4TNV106T |
| Gross Power | 96.6 hp |
| Power Measured @ | 2,200 rpm |
| Peak Torque | 291.4 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 268.6 cu in |
| Aspiration | turbocharged |
| Specification | MTL25 |
|---|---|
| Operating Weight | 10,693 lb |
| Cooling System Fluid Capacity | 4 gal |
| Fuel Capacity | 28.6 gal |
| Engine Oil Capacity | 3.7 gal |
| Hydraulic System Fluid Capacity | 25.1 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 60 amps |
| Max Speed - Low Range | 5 mph |
| Max Speed - High Range | 6.9 mph |
| Specification | MTL25 |
|---|---|
| Breakout Force | 8,692 lb |
| Operating Load | 3,527 lb |
| Tipping Angle | 7057 degrees |
| Bucket Capacity | 0.9 yd3 |
| Specification | MTL25 |
|---|---|
| Pump Flow | 23.6 gpm |
| Relief Valve Pressure | 2,988 psi |
| Figure | MTL25 |
|---|---|
| Engine horsepower per 1,000 lb of weight | 9.0 |
| Fuel tank per engine horsepower | 0.30 gal |
Mustang MTL25: tracked compact loader
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | tracked compact loader | Mustang and the MTL25. That is too few titles to say what owners mostly ask about, so the most recent are listed instead | 9 |
- Mustang Mtl25 Hydraulic Problems (Heavy Equipment Forums, 2023-10-15)
- Mustang Mtl25 Hard To Start (Heavy Equipment Forums, 2022-01-28)
- 07 Mustang Mtl25 Good Or Bad Machine (Heavy Equipment Forums, 2016-04-07)
- Tl150 Mtl25 Mustang Starts But Shuts Down In Seconds (Heavy Equipment Forums, 2015-09-12)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | Mustang tracked compact loader | 2 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| MTL25 | 2 | 2006 | $17,900 | $19,500 | $18,700 | None shown |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Mustang together with the tracked compact loader MTL25 | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Forum threads |
|
| Used-market listings |
|
| Federal agency data |
|
| Observation field | Recorded value |
|---|---|
| Title count | 9 |
| Forum indexes | Heavy Equipment Forums |
| Search wording | the MTL25 tracked compact loader |
| Latest title quoted by the reference | Mustang Mtl25 Hydraulic Problems |
Mustang MTL25: Configuration records
MTL25
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Width Over Tracks | 6.05 ft |
| Height To Top Of Cab | 7.28 ft |
| Ground Clearance | 14.3 in |
| Clearance At Max Lift And Dump | 7.8 ft |
| Reach At Max Lift And Dump | 3.42 ft |
| Turning Radius From Center - Machine Rear | 71.5 in |
| Length With Bucket | 13.21 ft |
| Turning Radius From Center - Inc Bucket | 105.99 in |
| Length With Out Bucket | 10.17 ft |
| Undercarriage | |
| Length Of Track On Ground | 5.25 ft |
| Track Gauge | 4.56 ft |
| Ground Contact Area | 1,132 in2 |
| Number Of Track Rollers Per Side | 5 |
| Width Of Track | 18 in |
| Ground Pressure | 4.3 psi |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 4TNV106T |
| Gross Power | 96.6 hp |
| Power Measured @ | 2,200 rpm |
| Peak Torque | 291.4 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 268.6 cu in |
| Aspiration | turbocharged |
| Operational | |
| Operating Weight | 10,693 lb |
| Cooling System Fluid Capacity | 4 gal |
| Fuel Capacity | 28.6 gal |
| Engine Oil Capacity | 3.7 gal |
| Hydraulic System Fluid Capacity | 25.1 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 60 amps |
| Max Speed - Low Range | 5 mph |
| Max Speed - High Range | 6.9 mph |
| Loader | |
| Breakout Force | 8,692 lb |
| Operating Load | 3,527 lb |
| Hydraulic | |
| Pump Flow | 23.6 gpm |
| Relief Valve Pressure | 2,988 psi |
| Additional specifications | |
| Bucket Capacity | 0.9 yd3 |
More in Mustang: 2066/2076/2086, 2803ZT–ME2203, MTL16/MTL20.