Machine models
Terex AT-15 and 9 related models specifications
The Franna AT-15 steers the load through articulation
The Franna AT-15 belongs to the articulated pick-and-carry part of this comparison. Its chassis joint changes the angle between the two bodies. The Series II capacity extract separates the smaller articulation zone from the zone beyond it; steering with a suspended load can therefore move the crane into a different rated condition.
A straight-ahead number cannot describe the whole turn.
The extract also separates lifting on the winch with the powered sections from winch lifting with the manual extension out. Those are different duty selections. The manual-extension notes base the structural ratings on boom angle, not radius, and state that retracting the powered sections does not change those ratings while the manual remains extended.
That distinction is easy to miss if a seller supplies only a single maximum-capacity figure.
Source: Terex AT-15 Series II C1406 capacity-manual extract, duties 01 and 03.Hino and Mercedes documents identify different drive packages
The older AT-15 brochure names a naturally aspirated Hino H07D and an Allison AT545 automatic transmission. The later Series II outline drawing identifies the OM906/2000 arrangement. Keep those identities apart.
A fluid or driveline part selected solely by “AT-15” can ignore the engine and transmission package that the document actually covers.
On the Hino-era specification, steering receives priority flow from the main pump, with an additional electric-hydraulic emergency supply. The brochure distinguishes the rear spring-applied parking brake from the front crane-operation hold brake. They have different jobs.
Its two-speed winch also quotes line pull at a full drum, while the multi-part hook-block capacity is a separate limit; the larger block number is not permission for the same load on a single rope part.
Sources: Original Hino-powered Franna AT-15 brochure; OM906/2000 Series II outline drawing 15-A-1-001.Use the complete capacity book that matches the crane and its fitted lifting point. The surviving extracts help identify the configuration; they do not replace its operating instructions.
Franna articulation and Terex RT slewing are different crane arrangements
The AT-15 and AT-20 records belong to Franna articulated pick-and-carry cranes. The RT models use a slewing upper works on a rough-terrain carrier. This is a comparison of different crane arrangements, not ten trims of one machine. Identify the carrier, boom and lifting-chart edition before comparing capacity or planning movement with a suspended load.
The AT-15 Series II moves its boom through chassis articulation
Terex's AT-15 Series II brochure specifies forty degrees of articulation each side of centre and a brake attachment that allows movement through that arc while stationary. Its Mercedes OM906LA drives an Allison 2000 transmission with five forward ratios. That differs from the rotating upper structure of an RT crane.
The AT badge and its road-travel figure do not establish an RT-style lifting area.
The same document distinguishes the machinery hook, reeved fall block and single-line winch capacity. A nominal machine capacity is therefore not the capacity of every hook arrangement. Match the lifting configuration to its chart instead of assigning the headline rating to the winch line.
Original Terex Franna AT-15 Series II Mercedes brochureThe AT-20 has different winch and driveline conditions
The AT-20 Mercedes brochure pairs the OM906LA engine with the Allison MD3060 six-speed transmission. Its four-part block is rated at 16.8 tonnes, while single-line pull is 4.2 tonnes with a full drum. The AT-15 brochure instead specifies a three-part block at 10.5 tonnes.
Keep that condition beside a line-pull comparison; hook capacity, rope reeving and line pull are not interchangeable figures.
The AT-20 also has a two-speed transfer case and selectable drive arrangement. Confirm the selected range and the actual carrier equipment during an inspection. Its road maximum is a travel specification, not permission to carry a load at that speed.
Original Terex Franna AT-20 Mercedes brochure: carrier, winch and transmissionRT160 and RT175 need their own outrigger and boom records
The RT160 manufacturer leaflet identifies fully extended, intermediate and retracted outrigger positions. The control indicator and the capacity chart must match the chosen position. Its quick-reeving boom head and optional swingaway jib also describe separate rigging arrangements, rather than an increase in main-boom capacity at every radius.
The RT175 TC-506 leaflet identifies a 126-foot boom, a 260-hp Cummins 6CTA8.3 and eight forward ratios. The RT160 TC-505 leaflet lists a 115-foot boom, a 215-hp 6CT8.3 and six forward ratios. An older secondary entry should not silently replace a rating from that identified leaflet, or vice versa.
Retain the edition with the specification when ordering parts or comparing used cranes. For a proposed lift, obtain the complete manufacturer chart for the exact machine; a brochure's maximum class rating cannot establish the load available at the job's radius.
Original Terex RT160 TC-505 leaflet; Original Terex RT175 TC-506 leaflet| Listing-entry count |
|---|
| 10 |
Short answer
Terex AT-15 and 9 related models: slewing rough-terrain and articulated pick-and-carry cranes.
| Configuration | Documented field and quantity |
|---|---|
| RT130 |
|
| RT1120 |
|
| RT780-1 |
|
| RT160 |
|
| RT175 |
|
| RT500-1 |
|
| RT700 |
|
| RT1000 |
|
| AT-15 |
|
| AT-20 |
|
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| Terex | AT-15 and 9 related models | 10 | RT160, RT175, RT500-1, RT700, RT1000, AT-15, and 4 more |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Min Height @ Max Raise Angle | 34 ft | 40 ft | 35 ft | 40 ft | 40 ft | 26.25 ft | 41.5 ft | 41 ft | 40 ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Max Height @ Max Raise Angle - No Jib | 115 ft | 126 ft | 110 ft | 126 ft | 126 ft | 17 m maximum hook height (Series II brochure) | 55.78 ft | 155 ft | 155 ft | 126 ft |
| Number Of Sections | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 5 | 5 | 4 |
| Specification | RT160 | RT175 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Max Elevating Angle | 78 degrees | 78 degrees | 78 degrees | 82 degrees | 60 degrees | 60 degrees | 80 degrees | 80 degrees | 78 degrees |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|
| Swing Speed | 2 rpm | 2 rpm | 2 rpm | 2.21 rpm | 1.5 rpm | 1.5 rpm | 2.25 rpm |
| Specification | RT160 | RT175 | AT-15 | AT-20 |
|---|---|---|---|---|
| Max Lift Capacity | 120,000 lb (60 US tons; nominal class) | 150,000 lb (75 US tons; nominal class) | 33,069 lb | 44,092 lb |
| Specification | AT-15 | AT-20 |
|---|---|---|
| Min Operating Radius | 5.25 ft | 4.6 ft |
| Max Operating Radius | 52.04 ft | 51.84 ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Transport Length | 45.17 ft | 48.67 ft | 44.2 ft | 48.61 ft | 48.59 ft | 30.27 ft | 31.73 ft | 49.8 ft | 49.2 ft | 48 ft |
| Transport Width | 9.68 ft | 9.68 ft | 11.13 ft | 9.84 ft | 12.22 ft | 8.11 ft | 8.17 ft | 11.1 ft | 11.56 ft | 8.7 ft |
| Transport Height | 12.18 ft | 12.7 ft | 12.21 ft | 13.07 ft | 13.42 ft | 9.8 ft | 10.08 ft | 13 ft | 13.03 ft | 13.1 ft |
| Wheelbase | 12 ft 3 in / 3.73 m (manufacturer drawing) | 12 ft 11 in / 3.94 m (1995 drawing) | 12.54 in | 13.13 in | 12.92 in | 3900 mm (AT-15 Series II drawing) | 4450 mm (rating manual 16C1320-/4-2) | 179.94 in | 179.93 in | 13.2 in |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Ground Clearance | 1.58 ft | 1.32 ft | 1.86 ft | 1.97 ft | 1.44 ft | 0.84 ft | 0.92 ft | 1.88 ft | 1.11 ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT130 | RT780-1 |
|---|---|---|---|---|---|---|---|
| Width W/ Outriggers Extended | 23.63 ft | 25.6 ft | 23.99 ft | 26 ft | 27.17 ft | 26 ft | 11.4 ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Carrier/Base Length | 26.59 ft | 27.56 ft | 25.55 ft | 27.1 ft | 28.88 ft | 19.71 ft | 21.28 ft | 29.2 ft | 27.1 ft |
| Specification | RT130 | RT1120 | RT780-1 |
|---|---|---|---|
| Upper Structure Tail Swing Radius | 15.11 ft | 15.92 ft | 13.12 ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Engine Model | 6CT8.3L | 6CTA8.3 | QSB185 | QSB5.9 | 6CTA8.3L | OM906LA | OM906LA | QSC-300 | QSC-300 | Cummins QSB6.7 |
| Power Measured @ | 2,500 rpm | 2,200 rpm | 2,400 rpm | 2,500 rpm | 2,200 rpm | 2,200 rpm | 2,800 rpm | 2,200 rpm | 2,200 rpm | 2,500 rpm |
| Max Torque | 558 lb-ft | 650 lb-ft (1995 sheet, 1,500 rpm) | 548 lb-ft | 750 lb-ft | 828 lb-ft | 523.7 lb-ft | 811.4 lb-ft | 1,000 lb-ft | 262.6 lb-ft | 730 lb-ft |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|
| Gross Power | 215 hp | 260 hp (1995 manufacturer sheet) | 190 hp | 275 hp | 275 hp | 300 hp | 300 hp | 260 hp |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT1120 |
|---|---|---|---|---|---|---|
| Displacement | 504.5 cu in | 505 cu in (1995 sheet) | 360 cu in | 359 cu in | 504.5 cu in | 506.5 cu in |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Aspiration | Turbocharged | Turbocharged, air cooled | Turbocharged, charge air cooled | Turbocharged & charge air cooled | Turbocharged & Charge air cooled | Turbocharged + intercooled | Turbocharged + intercooled | Turbocharged & Charge air cooled | Turbocharger with intercooler |
| Specification | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 |
|---|---|---|---|---|---|
| Net Power | 185 hp | 275 hp | 260 hp | 228 hp (engine output; brochure does not identify net standard) | 275 hp (engine output; brochure does not identify net standard) |
| Specification | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|
| Torque Measured @ | 1,400 rpm | 1,500 rpm | 1,300 rpm | 1,000 rpm | 1,000 rpm | 1,400 rpm | 1,400 rpm | 1,500 rpm |
| Specification | RT130 | RT1120 | RT780-1 |
|---|---|---|---|
| Number Of Cylinders | 6 | 6 | 6 |
| Specification | RT130 | RT1120 |
|---|---|---|
| Engine Make | Cummins | Cummins |
| Specification | RT1120 |
|---|---|
| Air Filter Type | Dry type |
| Bore | 4.5 in |
| Stroke | 5.4 in |
| Specification | RT780-1 |
|---|---|
| Emissions Certification | Tier 4 |
| Fuel Type | Ultra Low Sulfur Diesel |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT1120 |
|---|---|---|---|---|---|---|
| Operating Weight | 90,463 lb | 98,200 lb | 76,832 lb | 91,216 lb | 116,588 lb | 142,000 lb |
| Alternator Supplied Amperage | 70 amps | 65 amps (1995 sheet) | 100 amps | 102 amps | 70 amps | 130 amps |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fuel Capacity | 80 gal | 80 gal | 80 gal | 80 gal | 80 gal | 87.2 gal | 76.7 gal | 80 gal | 80 gal | 80 gal |
| Hydraulic System Fluid Capacity | 162 gal | 177 gal | 112 gal | 178 gal | 303 gal | 31.8 gal | 67.4 gal | 304 gal | 304 gal | 178 gal |
| Tire Size | 29.5 x 25-28 P.R | 29.5 x 25-28 P.R | 26.5x25, 26 P.R | 29.50 x 25, 28 P.R | 32.25 x 29 - 32 P.R | 11.00 x 20 Bias Ply Duals | 12.00 x 20 x 18 P.R. Bias Ply Duals | 33.25x29-32 PR | 32.25 x 29 | 29.5 X 25-28PR |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT130 | RT1120 |
|---|---|---|---|---|---|---|---|
| Operating Voltage | 24 V | 24 V | 24 V | 24 V | 24 V | 24 V | 12 V |
| Specification | RT780-1 |
|---|---|
| Auxiliary Hydraulic Flow | 52.7 gpm |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|
| Transmission Type | Power-Shift Transmission | Power-Shift Transmission | Power-Shift Transmission | Power-Shift Transmission | Power-Shift Transmission | Allison 2000 | Allison MD 3060 | Full Power-Shift Transmission | Powershift transmission with torque converter |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Number Of Forward Gears | 6 | 8 | 6 | 6 | 8 | 5 | 6 | 6 | 6 | 6 |
| Specification | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|
| Number Of Reverse Gears | 3 | 6 | 6 | 6 | 6 | 3 | 6 |
| Specification | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 |
|---|---|---|---|---|---|---|
| Max Speed - Forward | 22.8 mph | 25 mph | 24.8 mph | 52.9 mph | 52.9 mph | 12.7 mph |
| Specification | RT780-1 |
|---|---|
| Max Speed | 25 mph |
| Drawbar Pull | 13,800 lb |
| Specification | RT780-1 |
|---|---|
| Counterweight | 15,200 lb |
| Source guide | Differing-field count reported |
|---|---|
| AT-15 and 9 related models | 45 |
| Figure | RT160 | RT175 | RT500-1 | RT700 | RT1000 | RT1120 |
|---|---|---|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 2.4 | 2.2 | 2.4 | 3.0 | 2.2 | 2.1 |
| Figure | RT160 | RT175 | RT500-1 | RT700 | RT1000 | AT-15 | AT-20 | RT130 | RT1120 | RT780-1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Fuel tank per engine horsepower | 0.37 gal | 0.37 gal | 0.43 gal | 0.29 gal | 0.31 gal | 0.38 gal | 0.28 gal | 0.27 gal | 0.27 gal | 0.31 gal |
slewing rough-terrain or articulated pick-and-carry crane
AT-15 and 9 related models: forum references
Related discussion: “Swing Bearings Yes Plural Popping Bolts On Terex Rt555 1 Cranes”: 2857 and 15 related models.
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | Terex slewing rough-terrain or articulated pick-and-carry crane | 6 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| RT160 | 2 | 1998 to 1999 | $46,000 | $46,000 | $46,000 | 10,000 |
| RT175 | 1 | 1999 | $95,000 | $95,000 | $95,000 | None shown |
| RT130 | 2 | 2013 to 2015 | None shown | None shown | None shown | None shown |
| RT780-1 | 1 | 2013 | $195,000 | $195,000 | $195,000 | None shown |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Terex together with the slewing rough-terrain or articulated pick-and-carry crane RT160, RT175, RT500-1, RT700 | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Used-market listings |
|
| Federal agency data |
|
| Model and field | Earlier entry | Verified value and condition |
|---|---|---|
| AT-15 Max Height @ Max Raise Angle - No Jib | 65.62 ft | 17 m maximum hook height (Series II brochure) |
| RT160 Max Lift Capacity | 12,000 lb | 120,000 lb (60 US tons; nominal class) |
| RT175 Max Lift Capacity | 15,000 lb | 150,000 lb (75 US tons; nominal class) |
| RT160 Wheelbase | 12.24 in | 12 ft 3 in / 3.73 m (manufacturer drawing) |
| RT175 Wheelbase | 12.93 in | 12 ft 11 in / 3.94 m (1995 drawing) |
| AT-15 Wheelbase | 12.8 in | 3900 mm (AT-15 Series II drawing) |
| AT-20 Wheelbase | 14.6 in | 4450 mm (rating manual 16C1320-/4-2) |
| RT175 Engine Model | 6CT8.3L | 6CTA8.3 |
| RT175 Power Measured @ | 2,500 rpm | 2,200 rpm |
| RT175 Max Torque | 558 lb-ft | 650 lb-ft (1995 sheet, 1,500 rpm) |
| RT175 Gross Power | 215 hp | 260 hp (1995 manufacturer sheet) |
| RT175 Displacement | 504.5 cu in | 505 cu in (1995 sheet) |
| AT-15 Net Power | 228 hp | 228 hp (engine output; brochure does not identify net standard) |
| AT-20 Net Power | 275 hp | 275 hp (engine output; brochure does not identify net standard) |
| RT175 Alternator Supplied Amperage | 70 amps | 65 amps (1995 sheet) |
| RT175 Number Of Forward Gears | 6 | 8 |
| RT175 Number Of Reverse Gears | 3 | 6 |
Terex AT-15 and 9 related models: Configuration records
RT130
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 41.5 ft |
| Max Height @ Max Raise Angle - No Jib | 155 ft |
| Max Elevating Angle | 80 degrees |
| Number Of Sections | 5 |
| Dimensions and weight | |
| Transport Length | 49.8 ft |
| Transport Width | 11.1 ft |
| Transport Height | 13 ft |
| Wheelbase | 179.94 in |
| Width W/ Outriggers Extended | 26 ft |
| Carrier/Base Length | 29.2 ft |
| Upper Structure Tail Swing Radius | 15.11 ft |
| Engine | |
| Engine Model | QSC-300 |
| Gross Power | 300 hp |
| Power Measured @ | 2,200 rpm |
| Max Torque | 1,000 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Engine Make | Cummins |
| Operational | |
| Fuel Capacity | 80 gal |
| Operating Voltage | 24 V |
| Tire Size | 33.25x29-32 PR |
| Hydraulic System Fluid Capacity | 304 gal |
| Transmission and speeds | |
| Number Of Forward Gears | 6 |
| Max Speed - Forward | 12.7 mph |
| Additional specifications | |
| Number Of Cylinders | 6 |
RT1120
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 41 ft |
| Max Height @ Max Raise Angle - No Jib | 155 ft |
| Max Elevating Angle | 80 degrees |
| Number Of Sections | 5 |
| Dimensions and weight | |
| Transport Length | 49.2 ft |
| Transport Width | 11.56 ft |
| Transport Height | 13.03 ft |
| Wheelbase | 179.93 in |
| Ground Clearance | 1.88 ft |
| Upper Structure Tail Swing Radius | 15.92 ft |
| Engine | |
| Engine Model | QSC-300 |
| Gross Power | 300 hp |
| Power Measured @ | 2,200 rpm |
| Max Torque | 262.6 lb-ft |
| Torque Measured @ | 1,400 rpm |
| Displacement | 506.5 cu in |
| Aspiration | Turbocharged & Charge air cooled |
| Engine Make | Cummins |
| Operational | |
| Operating Weight | 142,000 lb |
| Fuel Capacity | 80 gal |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 130 amps |
| Tire Size | 32.25 x 29 |
| Hydraulic System Fluid Capacity | 304 gal |
| Transmission and speeds | |
| Transmission Type | Full Power-Shift Transmission |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 3 |
| Additional specifications | |
| Swing Speed | 1.5 rpm |
| Number Of Cylinders | 6 |
| Air Filter Type | Dry type |
| Bore | 4.5 in |
| Stroke | 5.4 in |
RT780-1
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 40 ft |
| Max Height @ Max Raise Angle - No Jib | 126 ft |
| Max Elevating Angle | 78 degrees |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 48 ft |
| Transport Width | 8.7 ft |
| Transport Height | 13.1 ft |
| Ground Clearance | 1.11 ft |
| Width W/ Outriggers Extended | 11.4 ft |
| Carrier/Base Length | 27.1 ft |
| Upper Structure Tail Swing Radius | 13.12 ft |
| Engine | |
| Engine Model | Cummins QSB6.7 |
| Gross Power | 260 hp |
| Power Measured @ | 2,500 rpm |
| Max Torque | 730 lb-ft |
| Torque Measured @ | 1,500 rpm |
| Aspiration | Turbocharger with intercooler |
| Operational | |
| Fuel Capacity | 80 gal |
| Tire Size | 29.5 X 25-28PR |
| Hydraulic System Fluid Capacity | 178 gal |
| Transmission and speeds | |
| Transmission Type | Powershift transmission with torque converter |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 6 |
| Additional specifications | |
| Swing Speed | 2.25 rpm |
| Number Of Cylinders | 6 |
| Emissions Certification | Tier 4 |
| Fuel Type | Ultra Low Sulfur Diesel |
| Auxiliary Hydraulic Flow | 52.7 gpm |
| Max Speed | 25 mph |
| Drawbar Pull | 13,800 lb |
| Counterweight | 15,200 lb |
RT160
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 34 ft |
| Max Height @ Max Raise Angle - No Jib | 115 ft |
| Max Elevating Angle | 78 degrees |
| Swing Speed | 2 rpm |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 45.17 ft |
| Transport Width | 9.68 ft |
| Transport Height | 12.18 ft |
| Ground Clearance | 1.58 ft |
| Width W/ Outriggers Extended | 23.63 ft |
| Carrier/Base Length | 26.59 ft |
| Wheelbase | 12 ft 3 in / 3.73 m (manufacturer drawing) |
| Engine | |
| Engine Model | 6CT8.3L |
| Gross Power | 215 hp |
| Power Measured @ | 2,500 rpm |
| Max Torque | 558 lb-ft |
| Displacement | 504.5 cu in |
| Aspiration | Turbocharged |
| Operational | |
| Operating Weight | 90,463 lb |
| Fuel Capacity | 80 gal |
| Hydraulic System Fluid Capacity | 162 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
| Tire Size | 29.5 x 25-28 P.R |
| Transmission and speeds | |
| Transmission Type | Power-Shift Transmission |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 3 |
| Additional specifications | |
| Max Lift Capacity | 120,000 lb (60 US tons; nominal class) |
RT175
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 40 ft |
| Max Height @ Max Raise Angle - No Jib | 126 ft |
| Max Elevating Angle | 78 degrees |
| Swing Speed | 2 rpm |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 48.67 ft |
| Transport Width | 9.68 ft |
| Transport Height | 12.7 ft |
| Ground Clearance | 1.32 ft |
| Width W/ Outriggers Extended | 25.6 ft |
| Carrier/Base Length | 27.56 ft |
| Wheelbase — 1995 manufacturer specification, not RT160 engine/transmission record | 12 ft 11 in / 3.94 m (1995 drawing) |
| Engine | |
| Engine Model — 1995 manufacturer specification, not RT160 engine/transmission record | 6CTA8.3 |
| Gross Power — 1995 manufacturer specification, not RT160 engine/transmission record | 260 hp (1995 manufacturer sheet) |
| Power Measured @ — 1995 manufacturer specification, not RT160 engine/transmission record | 2,200 rpm |
| Max Torque — 1995 manufacturer specification, not RT160 engine/transmission record | 650 lb-ft (1995 sheet, 1,500 rpm) |
| Displacement — 1995 manufacturer specification, not RT160 engine/transmission record | 505 cu in (1995 sheet) |
| Aspiration | Turbocharged, air cooled |
| Operational | |
| Operating Weight | 98,200 lb |
| Fuel Capacity | 80 gal |
| Hydraulic System Fluid Capacity | 177 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage — 1995 manufacturer specification, not RT160 engine/transmission record | 65 amps (1995 sheet) |
| Tire Size | 29.5 x 25-28 P.R |
| Transmission and speeds | |
| Transmission Type | Power-Shift Transmission |
| Number Of Forward Gears — 1995 manufacturer specification, not RT160 engine/transmission record | 8 |
| Number Of Reverse Gears — 1995 manufacturer specification, not RT160 engine/transmission record | 6 |
| Additional specifications | |
| Max Lift Capacity — 1995 manufacturer specification, not RT160 engine/transmission record | 150,000 lb (75 US tons; nominal class) |
RT500-1
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 35 ft |
| Max Height @ Max Raise Angle - No Jib | 110 ft |
| Swing Speed | 2 rpm |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 44.2 ft |
| Transport Width | 11.13 ft |
| Transport Height | 12.21 ft |
| Ground Clearance | 1.86 ft |
| Width W/ Outriggers Extended | 23.99 ft |
| Carrier/Base Length | 25.55 ft |
| Engine | |
| Engine Model | QSB185 |
| Gross Power | 190 hp |
| Power Measured @ | 2,400 rpm |
| Max Torque | 548 lb-ft |
| Displacement | 360 cu in |
| Aspiration | Turbocharged, charge air cooled |
| Net Power | 185 hp |
| Torque Measured @ | 1,400 rpm |
| Operational | |
| Operating Weight | 76,832 lb |
| Fuel Capacity | 80 gal |
| Hydraulic System Fluid Capacity | 112 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 100 amps |
| Tire Size | 26.5x25, 26 P.R |
| Transmission and speeds | |
| Transmission Type | Power-Shift Transmission |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 6 |
| Max Speed - Forward | 22.8 mph |
RT700
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 40 ft |
| Max Height @ Max Raise Angle - No Jib | 126 ft |
| Max Elevating Angle | 78 degrees |
| Swing Speed | 2.21 rpm |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 48.61 ft |
| Transport Width | 9.84 ft |
| Transport Height | 13.07 ft |
| Ground Clearance | 1.97 ft |
| Width W/ Outriggers Extended | 26 ft |
| Carrier/Base Length | 27.1 ft |
| Engine | |
| Engine Model | QSB5.9 |
| Gross Power | 275 hp |
| Power Measured @ | 2,500 rpm |
| Max Torque | 750 lb-ft |
| Displacement | 359 cu in |
| Aspiration | Turbocharged & charge air cooled |
| Net Power | 275 hp |
| Torque Measured @ | 1,500 rpm |
| Operational | |
| Operating Weight | 91,216 lb |
| Fuel Capacity | 80 gal |
| Hydraulic System Fluid Capacity | 178 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 102 amps |
| Tire Size | 29.50 x 25, 28 P.R |
| Transmission and speeds | |
| Transmission Type | Power-Shift Transmission |
| Number Of Forward Gears | 6 |
| Number Of Reverse Gears | 6 |
| Max Speed - Forward | 25 mph |
RT1000
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 40 ft |
| Max Height @ Max Raise Angle - No Jib | 126 ft |
| Max Elevating Angle | 82 degrees |
| Swing Speed | 1.5 rpm |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 48.59 ft |
| Transport Width | 12.22 ft |
| Transport Height | 13.42 ft |
| Ground Clearance | 1.44 ft |
| Width W/ Outriggers Extended | 27.17 ft |
| Carrier/Base Length | 28.88 ft |
| Engine | |
| Engine Model | 6CTA8.3L |
| Gross Power | 275 hp |
| Power Measured @ | 2,200 rpm |
| Max Torque | 828 lb-ft |
| Displacement | 504.5 cu in |
| Aspiration | Turbocharged & Charge air cooled |
| Net Power | 260 hp |
| Torque Measured @ | 1,300 rpm |
| Operational | |
| Operating Weight | 116,588 lb |
| Fuel Capacity | 80 gal |
| Hydraulic System Fluid Capacity | 303 gal |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
| Tire Size | 32.25 x 29 - 32 P.R |
| Transmission and speeds | |
| Transmission Type | Power-Shift Transmission |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 6 |
| Max Speed - Forward | 24.8 mph |
AT-15
| Specification | Source figure |
|---|---|
| Boom | |
| Min Height @ Max Raise Angle | 26.25 ft |
| Maximum Hook Height — AT-15 Series II without flyjib | 17 m maximum hook height (Series II brochure) |
| Max Elevating Angle | 60 degrees |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 30.27 ft |
| Transport Width | 8.11 ft |
| Transport Height | 9.8 ft |
| Ground Clearance | 0.84 ft |
| Carrier/Base Length | 19.71 ft |
| Wheelbase (OM906/2000 Series II) — Actual scanned drawing15-A-1-001,dated28September2004;earlier13-A referencewasincorrect. | 3900 mm (AT-15 Series II drawing) |
| Engine | |
| Engine Model | OM906LA |
| Power Measured @ | 2,200 rpm |
| Max Torque | 523.7 lb-ft |
| Aspiration | Turbocharged + intercooled |
| Engine Output (Brochure) — Rating standard unspecified by brochure | 228 hp (engine output; brochure does not identify net standard) |
| Torque Measured @ | 1,000 rpm |
| Operational | |
| Fuel Capacity | 87.2 gal |
| Hydraulic System Fluid Capacity | 31.8 gal |
| Tire Size | 11.00 x 20 Bias Ply Duals |
| Transmission and speeds | |
| Transmission Type | Allison 2000 |
| Number Of Forward Gears | 5 |
| Max Speed - Forward | 52.9 mph |
| Additional specifications | |
| Max Lift Capacity | 33,069 lb |
| Min Operating Radius | 5.25 ft |
| Max Operating Radius | 52.04 ft |
AT-20
| Specification | Source figure |
|---|---|
| Boom | |
| Max Height @ Max Raise Angle - No Jib | 55.78 ft |
| Max Elevating Angle | 60 degrees |
| Number Of Sections | 4 |
| Dimensions and weight | |
| Transport Length | 31.73 ft |
| Transport Width | 8.17 ft |
| Transport Height | 10.08 ft |
| Ground Clearance | 0.92 ft |
| Carrier/Base Length | 21.28 ft |
| Wheelbase — Rating manual 16C1320-/4-2 | 4450 mm (rating manual 16C1320-/4-2) |
| Engine | |
| Engine Model | OM906LA |
| Power Measured @ | 2,800 rpm |
| Max Torque | 811.4 lb-ft |
| Aspiration | Turbocharged + intercooled |
| Engine Output (Brochure) — Rating standard unspecified by brochure | 275 hp (engine output; brochure does not identify net standard) |
| Torque Measured @ | 1,000 rpm |
| Operational | |
| Fuel Capacity | 76.7 gal |
| Hydraulic System Fluid Capacity | 67.4 gal |
| Tire Size | 12.00 x 20 x 18 P.R. Bias Ply Duals |
| Transmission and speeds | |
| Transmission Type | Allison MD 3060 |
| Number Of Forward Gears | 6 |
| Max Speed - Forward | 52.9 mph |
| Additional specifications | |
| Max Lift Capacity | 44,092 lb |
| Min Operating Radius | 4.6 ft |
| Max Operating Radius | 51.84 ft |
More in Terex: CD200–RT600, A600, RT45–RT670-1.