Machine models

CASE 521D–621DXT: linkage, cooling and 521F edition differences

D-Series linkage choices and the later 521F

The 521D and 621D comparison needs the front linkage identified first. CASE's D-Series literature separates conventional Z-bar, XT tool-carrier and extended-reach arrangements. An optional quick coupler changes the working attachment again.

A bucket volume alone cannot identify dump clearance, reach or tipping load.

The D-Series cooling layout places the module between the engine and cab, with the engine behind the rear axle. Inspect the central cooler faces, not just the rear grille. CASE describes independent cooler faces and an optional reversing hydraulic fan.

The reversing function should be checked on the particular loader; the presence of a cooling fan does not establish that option.

Daily access is also distinctive. The D brochure shows a one-piece raising hood and remote coolant, hydraulic and engine-oil drains grouped at the left rear. Check for damaged panels, blocked access and leaking drain connections during a walkaround.

A clean visible engine bay does not show the condition between all the cooler faces.

Source: CASE D-Series brochure, CE-378-02-03.

The European D sheet lists a single-body variable axial-piston working pump with load sensing. It separates hydraulic-system capacity from tank capacity. Those quantities are not interchangeable when servicing a drained tank versus the whole circuit.

Steering priority and brake circuits need their own diagnosis.

Its bucket charts change the counterweight basis between standard and XT arrangements. The XT table includes the quick-coupler bucket assembly and a heavy counterweight. Compare complete columns: taking a lighter standard machine's weight together with an XT load figure would hide part of the equipment that produced that figure.

The document also distinguishes loaded raising from empty lowering when stating cycle time.

Source: Original CASE European D-Series sheet.

The 521F introduces another document boundary. The opened Tier4 Interim sheet names its engine and gives three power modes, each with rated and peak output entries. The headline peak figure is not its rated output in every mode.

Its DEF table separates usable capacity from total tank volume. Match the engine and emissions plate before using those quantities on an F loader; the earlier D-series diesel-only fuel and hydraulic capacities do not describe that system.

Source: CASE 521F Tier4 Interim specification.
Earlier reference entries and original manufacturer corrections
Model and fieldEarlier entryManufacturer figure and scopeSource
521F DEF Tank Capacity11.2 galEarlier11.2gal catalogue entry lacks matched edition. Original2013 Tier4Interim F4HFE413J sheet lists6.5gal24.8L usable and10.2gal38.6L total; these are not a universal refill for the separately listed F4HFE413NB engine.Original document
Entries in this reference
Listing-entry count
9
Short answer

CASE 521D–621DXT: linkage, cooling and 521F edition differences: wheel loaders.

Selected configuration figures
ConfigurationDocumented field and quantity
521D
Net Power
110 hp
Operating Weight
22,109 lb
521DXT
Net Power
110 hp
Operating Weight
23,938 lb
521E
Net Power
118 hp
Operating Weight
23,069 lb
521EXR
Net Power
118 hp
Operating Weight
23,442 lb
521EXT
Net Power
118 hp
Operating Weight
26,861 lb
521F
Net Power
131 hp
Operating Weight
22,855 lb
621D
Net Power
136 hp
Operating Weight
26,083 lb
621DXR
Net Power
136 hp
Operating Weight
26,364 lb
621DXT
Net Power
136 hp
Operating Weight
27,877 lb
521D to 621DXT specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
CASE521D to 621DXT9521D, 521DXT, 521E, 521EXR, 521EXT, 521F, and 3 more
Bucket
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Dump Clearance At Max Raise9.06 ft9.06 ft9.07 ft7.03 ft9.13 ft9.21 ft10.61 ft9.44 ft
Specification521D521DXT521E521EXR521EXT521F621D621DXR
Bucket Capacity - Heaped2.5 yd32 yd32.11 yd32.11 yd32.11 yd32.11 yd33 yd33 yd3
Specification521D521E521EXR521EXT621D621DXR621DXT
Bucket Capacity - Struck2.12 yd31.77 yd31.77 yd31.77 yd32.57 yd32.57 yd32.5 yd3
Specification521D521DXT521E521EXR521EXT621D621DXR
Bucket Width8.1 ft8.1 ft8.37 ft8.37 ft8.37 ft8.54 ft8.54 ft
Specification521D521DXT521F621D621DXR621DXT
Breakout Force20,951 lb21,929 lb20,862 lb23,237 lb23,936 lb26,739 lb
Dimensions and weight
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Ground Clearance1.24 ft1.24 ft1.24 ft1.24 ft1.24 ft1.24 ft1.56 ft1.56 ft1.56 ft
Width Over Tires7.58 ft7.58 ft8.17 ft8.17 ft8.17 ft8.17 ft7.82 ft7.82 ft7.82 ft
Height To Top Of Cab10.41 ft10.41 ft10.76 ft10.76 ft10.76 ft10.76 ft10.85 ft10.85 ft10.85 ft
Wheelbase9.03 ft9.03 ft9.03 ft9.03 ft9.03 ft9.03 ft9.52 ft9.52 ft9.52 ft
Hinge Pin - Max Height11.82 ft12.27 ft11.84 ft13.09 ft12.29 ft11.85 ft12.59 ft13.98 ft13 ft
Reach At Max Lift And Dump3.47 ft3.69 ft3.16 ft3.08 ft3.67 ft4.67 ft3.33 ft3.34 ft3.75 ft
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Length With Bucket On Ground22.01 ft22.04 ft21.69 ft22.83 ft21.83 ft23.09 ft24.43 ft23.37 ft
Specification521F
Turning Radius Outside Tires13.2 ft
Overall Length (L/Bucket)21.69 ft
Dump Reach @ Full Height, 45° Dump: Bucket3.16 ft
Engine
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Number Of Cylinders444444666
Engine ModelFamily III 445TA/M2, Tier II certifiedFamily III 445TA/M2, Tier II certified445TA/EGE445TA/EGE445TA/EGEFPT F4HFE413NBFamily III 668TA/M2Family III 668TA/M2668TA/M2
Net Power110 hp110 hp118 hp118 hp118 hp131 hp136 hp136 hp136 hp
Gross Power119 hp119 hp129 hp129 hp129 hp142 hp148 hp146 hp148 hp
Max Torque336 lb-ft336 lb-ft407 lb-ft407 lb-ft407 lb-ft448.5 lb-ft495 lb-ft495 lb-ft509 lb-ft
Displacement275 cu in275 cu in274 cu in274 cu in274 cu in274.7 cu in409 cu in409 cu in409 cu in
Torque Rise14 %14 %19 %19 %19 %21 %33 %33 %33 %
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Power Measured @2,000 rpm2,000 rpm1,800 rpm1,800 rpm1,800 rpm2,000 rpm2,000 rpm2,000 rpm
Torque Measured @1,400 rpm1,400 rpm1,300 rpm1,300 rpm1,300 rpm1,200 rpm1,200 rpm1,200 rpm
AspirationTurbocharged and AftercooledTurbocharged and AftercooledTurbochargedTurbochargedTurbochargedturbocharged and air to air cooledturbocharged and air to air cooledTurbocharged with Aftercooler
Specification521F
Rated Engine Speed1,800 rpm
EmissionsTier 4
Alternator70 amps
Operational
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Operating Weight22,109 lb23,938 lb23,069 lb23,442 lb26,861 lb22,855 lb26,083 lb26,364 lb27,877 lb
Fuel Capacity50 gal50 gal50 gal50 gal50 gal50 gal50 gal50 gal50 gal
Cooling System Fluid Capacity5.8 gal5.8 gal5.9 gal5.9 gal5.9 gal5.9 gal6.4 gal6.4 gal6.3 gal
Transmission Fluid Capacity5 gal5 gal5 gal5 gal5 gal5 gal5 gal5 gal5 gal
Front Axle/Diff Fluid Capacity5.9 gal5.9 gal5.7 gal5.7 gal5.7 gal5.9 gal5.9 gal5.9 gal5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal5.9 gal5.7 gal5.7 gal5.7 gal5.9 gal5.9 gal5.9 gal5.9 gal
Operating Voltage24 V24 V24 V24 V24 V24 V24 V24 V24 V
Rear Axle Oscillation24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Hydraulic System Fluid Capacity30 gal30 gal30.2 gal30.2 gal30.2 gal30.1 gal30.1 gal30 gal
Engine Oil Fluid Capacity3.4 gal3.4 gal3.2 gal3.2 gal3.2 gal4.3 gal4.3 gal4.3 gal
Static Tipping Weight18,424 lb18,424 lb18,620 lb15,819 lb15,640 lb22,434 lb18,389 lb20,318 lb
Turning Radius16.3 ft16.3 ft16.4 ft16.4 ft16.4 ft17 ft17 ft17 ft
Alternator Supplied Amperage70 amps70 amps70 amps70 amps70 amps70 amps70 amps70 amps
Tire Size17.5x2517.5x2517.5 x 25 L317.5 x 25 L317.5 x 25 L320.5x25 L320.5x25 L320.5x25
Specification521F
DEF Tank CapacityEarlier11.2gal catalogue entry lacks matched edition. Original2013 Tier4Interim F4HFE413J sheet lists6.5gal24.8L usable and10.2gal38.6L total; these are not a universal refill for the separately listed F4HFE413NB engine.
Transmission and speeds
Specification521D521DXT521F621D621DXR
Transmission Type4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulationPowershift4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Number Of Forward Gears444444444
Number Of Reverse Gears333333333
Max Speed - Forward23.4 mph23.4 mph22.3 mph22.3 mph22.3 mph22.3 mph24 mph24 mph24 mph
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Max Speed - Reverse15.2 mph15.2 mph14.1 mph14.1 mph14.1 mph15.6 mph15.6 mph15.6 mph
Specification521F
Differential LockF: LSD / R: LSD
Hydraulic System
Specification521D521DXT521E521EXR521EXT621D621DXR621DXT
Relief Valve Setting2,750 psi2,750 psi3,625 psi3,625 psi3,625 psi3,600 psi3,600 psi3,625 psi
Raise Time5.6 sec5.6 sec5.6 sec5.6 sec5.6 sec5.4 sec5.4 sec5.4 sec
Dump Time1.1 sec1.1 sec1.1 sec1.1 sec1.1 sec1.5 sec1.5 sec1.7 sec
Lower Time3.7 sec3.7 sec2.7 sec2.7 sec2.7 sec5 sec5 sec4.4 sec
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Pump Flow Capacity35.4 gpm35.4 gpm35.4 gpm35.4 gpm35.4 gpm35.4 gpm45.2 gpm45.2 gpm45.2 gpm
Specification521D521DXT521F621D621DXR621DXT
Pump Typeclosed centered pressure/flow compensatedclosed centered pressure/flow compensatedPistonclosed centered pressure/flow compensatedclosed centered pressure/flow compensatedclosed centered variable displacement
Specification521F
Steering ArrangementArticulation
Hydraulic Cycle Times (Unloaded)
Specification521F
Total Cycle Time10.5 sec
Performance
Specification521F
Tipping Load15,992 lb
Brakes
Specification521F
Service BrakeWet Multi Disc
Variants — Source comparison annotation
Source guideDiffering-field count reported
521D to 621DXT53
Ratios
Figure521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Engine horsepower per 1,000 lb of weight5.04.65.15.04.45.75.25.24.9
Pump flow per engine horsepower0.32 gpm0.32 gpm0.30 gpm0.30 gpm0.30 gpm0.27 gpm0.33 gpm0.33 gpm0.33 gpm
Fuel tank per engine horsepower0.45 gal0.45 gal0.42 gal0.42 gal0.42 gal0.38 gal0.37 gal0.37 gal0.37 gal

521D to 621DXT: owner reports

Sources: 3 forum discussions about the Case 521 wheel loaders (521D, 521G); heavyequipmentforums.com.Sources: 3 forum discussions about the Case 621 wheel loaders (621B, 621C); heavyequipmentforums.com.
521D to 621DXT: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumswheel loaderCASE and the 621 line that the 521D, 521DXT, 521E, 621D belongs to (no title names the exact model)73
Topics named by those titles
Title topicTitles
brakes and steering10
hydraulics8
transmission and drive5
Topic in the titleThreadsShare of matching threads
brakes and steering1014%
hydraulics811%
transmission and drive57%
Used market for the 521D to 621DXT — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderCASE wheel loader30
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
521D72001 to 2008$23,900$63,104$46,0885,702
521E22009 to 2011$119,500$119,500$119,500None shown
521F42014 to 2016$46,900$92,881$82,740None shown
621D172001 to 2007$29,500$70,000$48,5694,377
521D to 621DXT: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionCASE together with the wheel loader 521D, 521DXT, 521E, 521EXRNo matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
  • Reference site: CASE 521D — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 521DXT — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 521E — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 521EXR — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 521EXT — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 521F — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 621D — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 621DXR — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: CASE 621DXT — RitchieSpecs. Observed 2026-09-24.
Forum threads
Forum threads
Used-market listings
Federal agency data

CASE 521D–621DXT: linkage, cooling and 521F edition differences: Configuration records

521D
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.06 ft
Bucket Capacity - Heaped2.5 yd3
Bucket Capacity - Struck2.12 yd3
Breakout Force20,951 lb
Dimensions and weight
Width Over Tires7.58 ft
Height To Top Of Cab10.41 ft
Wheelbase9.03 ft
Hinge Pin - Max Height11.82 ft
Reach At Max Lift And Dump3.47 ft
Engine
Number Of Cylinders4
Engine ModelFamily III 445TA/M2, Tier II certified
Net Power110 hp
Gross Power119 hp
Power Measured @2,000 rpm
Max Torque336 lb-ft
Displacement275 cu in
Torque Measured @1,400 rpm
AspirationTurbocharged and Aftercooled
Torque Rise14 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30 gal
Engine Oil Fluid Capacity3.4 gal
Cooling System Fluid Capacity5.8 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Static Tipping Weight18,424 lb
Turning Radius16.3 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward23.4 mph
Max Speed - Reverse15.2 mph
Hydraulic System
Relief Valve Setting2,750 psi
Pump Flow Capacity35.4 gpm
Raise Time5.6 sec
Dump Time1.1 sec
Lower Time3.7 sec
Pump Typeclosed centered pressure/flow compensated
Additional specifications
Bucket Width8.1 ft
Ground Clearance1.24 ft
Length With Bucket On Ground22.01 ft
Operating Weight22,109 lb
Tire Size17.5x25
Transmission Type4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation
European Hydraulic And Linkage ReferenceOriginalFeb2005 EuropeanDsheet: single variable axial-piston load-sensing closed-centre pump134L/min/250bar; circuit114L vs57Ltank;521D standardbucket chart separate from521DXT heavy-counterweight/quick-coupler chart. Not unqualified replacement of everyUSrecord. [source]

Source

521DXT
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.06 ft
Bucket Capacity - Heaped2 yd3
Breakout Force21,929 lb
Dimensions and weight
Width Over Tires7.58 ft
Height To Top Of Cab10.41 ft
Wheelbase9.03 ft
Hinge Pin - Max Height12.27 ft
Reach At Max Lift And Dump3.69 ft
Engine
Number Of Cylinders4
Engine ModelFamily III 445TA/M2, Tier II certified
Net Power110 hp
Gross Power119 hp
Power Measured @2,000 rpm
Max Torque336 lb-ft
Displacement275 cu in
Torque Measured @1,400 rpm
AspirationTurbocharged and Aftercooled
Torque Rise14 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30 gal
Engine Oil Fluid Capacity3.4 gal
Cooling System Fluid Capacity5.8 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Static Tipping Weight18,424 lb
Turning Radius16.3 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward23.4 mph
Max Speed - Reverse15.2 mph
Hydraulic System
Relief Valve Setting2,750 psi
Pump Flow Capacity35.4 gpm
Raise Time5.6 sec
Dump Time1.1 sec
Lower Time3.7 sec
Pump Typeclosed centered pressure/flow compensated
Additional specifications
Bucket Width8.1 ft
Ground Clearance1.24 ft
Length With Bucket On Ground22.04 ft
Operating Weight23,938 lb
Tire Size17.5x25
Transmission Type4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation

Source

521E
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.07 ft
Bucket Capacity - Heaped2.11 yd3
Bucket Capacity - Struck1.77 yd3
Dimensions and weight
Width Over Tires8.17 ft
Height To Top Of Cab10.76 ft
Wheelbase9.03 ft
Hinge Pin - Max Height11.84 ft
Reach At Max Lift And Dump3.16 ft
Engine
Number Of Cylinders4
Engine Model445TA/EGE
Net Power118 hp
Gross Power129 hp
Power Measured @1,800 rpm
Max Torque407 lb-ft
Displacement274 cu in
Torque Measured @1,300 rpm
AspirationTurbocharged
Torque Rise19 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30.2 gal
Engine Oil Fluid Capacity3.2 gal
Cooling System Fluid Capacity5.9 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.7 gal
Rear Axle/Diff Fluid Capacity5.7 gal
Static Tipping Weight18,620 lb
Turning Radius16.4 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward22.3 mph
Max Speed - Reverse14.1 mph
Hydraulic System
Relief Valve Setting3,625 psi
Pump Flow Capacity35.4 gpm
Raise Time5.6 sec
Dump Time1.1 sec
Lower Time2.7 sec
Additional specifications
Bucket Width8.37 ft
Ground Clearance1.24 ft
Length With Bucket On Ground21.69 ft
Operating Weight23,069 lb
Tire Size17.5 x 25 L3

Source

521EXR
SpecificationSource figure
Bucket
Dump Clearance At Max Raise7.03 ft
Bucket Capacity - Heaped2.11 yd3
Bucket Capacity - Struck1.77 yd3
Dimensions and weight
Width Over Tires8.17 ft
Height To Top Of Cab10.76 ft
Wheelbase9.03 ft
Hinge Pin - Max Height13.09 ft
Reach At Max Lift And Dump3.08 ft
Engine
Number Of Cylinders4
Engine Model445TA/EGE
Net Power118 hp
Gross Power129 hp
Power Measured @1,800 rpm
Max Torque407 lb-ft
Displacement274 cu in
Torque Measured @1,300 rpm
AspirationTurbocharged
Torque Rise19 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30.2 gal
Engine Oil Fluid Capacity3.2 gal
Cooling System Fluid Capacity5.9 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.7 gal
Rear Axle/Diff Fluid Capacity5.7 gal
Static Tipping Weight15,819 lb
Turning Radius16.4 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward22.3 mph
Max Speed - Reverse14.1 mph
Hydraulic System
Relief Valve Setting3,625 psi
Pump Flow Capacity35.4 gpm
Raise Time5.6 sec
Dump Time1.1 sec
Lower Time2.7 sec
Additional specifications
Bucket Width8.37 ft
Ground Clearance1.24 ft
Length With Bucket On Ground22.83 ft
Operating Weight23,442 lb
Tire Size17.5 x 25 L3

Source

521EXT
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.13 ft
Bucket Capacity - Heaped2.11 yd3
Bucket Capacity - Struck1.77 yd3
Dimensions and weight
Width Over Tires8.17 ft
Height To Top Of Cab10.76 ft
Wheelbase9.03 ft
Hinge Pin - Max Height12.29 ft
Reach At Max Lift And Dump3.67 ft
Engine
Number Of Cylinders4
Engine Model445TA/EGE
Net Power118 hp
Gross Power129 hp
Power Measured @1,800 rpm
Max Torque407 lb-ft
Displacement274 cu in
Torque Measured @1,300 rpm
AspirationTurbocharged
Torque Rise19 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30.2 gal
Engine Oil Fluid Capacity3.2 gal
Cooling System Fluid Capacity5.9 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.7 gal
Rear Axle/Diff Fluid Capacity5.7 gal
Static Tipping Weight15,640 lb
Turning Radius16.4 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward22.3 mph
Max Speed - Reverse14.1 mph
Hydraulic System
Relief Valve Setting3,625 psi
Pump Flow Capacity35.4 gpm
Raise Time5.6 sec
Dump Time1.1 sec
Lower Time2.7 sec
Additional specifications
Bucket Width8.37 ft
Ground Clearance1.24 ft
Length With Bucket On Ground21.83 ft
Operating Weight26,861 lb
Tire Size17.5 x 25 L3

Source

521F
SpecificationSource figure
Bucket
Bucket Capacity - Heaped2.11 yd3
Breakout Force20,862 lb
Dimensions and weight
Width Over Tires8.17 ft
Height To Top Of Cab10.76 ft
Wheelbase9.03 ft
Hinge Pin - Max Height11.85 ft
Reach At Max Lift And Dump4.67 ft
Turning Radius Outside Tires13.2 ft
Overall Length (L/Bucket)21.69 ft
Dump Reach @ Full Height, 45° Dump: Bucket3.16 ft
Engine
Number Of Cylinders4
Engine ModelFPT F4HFE413NB
Net Power131 hp
Gross Power142 hp
Max Torque448.5 lb-ft
Displacement274.7 cu in
Torque Rise21 %
Rated Engine Speed1,800 rpm
EmissionsTier 4
Alternator70 amps
Operational
Fuel Capacity50 gal
Cooling System Fluid Capacity5.9 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Operating Voltage24 V
Rear Axle Oscillation24 degrees
DEF Tank CapacityEarlier11.2gal catalogue entry lacks matched edition. Original2013 Tier4Interim F4HFE413J sheet lists6.5gal24.8L usable and10.2gal38.6L total; these are not a universal refill for the separately listed F4HFE413NB engine. [source]
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward22.3 mph
Differential LockF: LSD / R: LSD
Hydraulic System
Pump Flow Capacity35.4 gpm
Pump TypePiston
Hydraulic Cycle Times (Unloaded)
Total Cycle Time10.5 sec
Performance
Tipping Load15,992 lb
Brakes
Service BrakeWet Multi Disc
Additional specifications
Ground Clearance1.24 ft
Operating Weight22,855 lb
Transmission TypePowershift
Steering ArrangementArticulation [source]
Interim Power And Engine BoundaryCCE201311521F: F4HFE413J Tier4Interim; maximum mode123hp rated2000rpm versus131hp peak, standard106hp rated/118hp peak, economy76hp rated/101hp peak. EarlierF4HFE413NB/1800rpm catalogue separate; match engine/emissions plate. [source]

Source

621D
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.21 ft
Bucket Capacity - Heaped3 yd3
Bucket Capacity - Struck2.57 yd3
Breakout Force23,237 lb
Dimensions and weight
Width Over Tires7.82 ft
Height To Top Of Cab10.85 ft
Wheelbase9.52 ft
Hinge Pin - Max Height12.59 ft
Reach At Max Lift And Dump3.33 ft
Engine
Number Of Cylinders6
Engine ModelFamily III 668TA/M2
Net Power136 hp
Gross Power148 hp
Power Measured @2,000 rpm
Max Torque495 lb-ft
Displacement409 cu in
Torque Measured @1,200 rpm
Aspirationturbocharged and air to air cooled
Torque Rise33 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30.1 gal
Engine Oil Fluid Capacity4.3 gal
Cooling System Fluid Capacity6.4 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Static Tipping Weight22,434 lb
Turning Radius17 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward24 mph
Max Speed - Reverse15.6 mph
Hydraulic System
Relief Valve Setting3,600 psi
Pump Flow Capacity45.2 gpm
Raise Time5.4 sec
Dump Time1.5 sec
Lower Time5 sec
Pump Typeclosed centered pressure/flow compensated
Additional specifications
Bucket Width8.54 ft
Ground Clearance1.56 ft
Length With Bucket On Ground23.09 ft
Operating Weight26,083 lb
Tire Size20.5x25 L3
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
European Engine And Hydraulic BoundaryOriginalFeb2005 EuropeanDsheet:6TAA6802 six-cylinder6.8L;101kW netCEE 80/1269 versus110kW grossSAE J1995;171L/min/250bar. Standard,XR andXT loader geometries have separate bucket/weight columns. [source]

Source

621DXR
SpecificationSource figure
Bucket
Dump Clearance At Max Raise10.61 ft
Bucket Capacity - Heaped3 yd3
Bucket Capacity - Struck2.57 yd3
Breakout Force23,936 lb
Dimensions and weight
Width Over Tires7.82 ft
Height To Top Of Cab10.85 ft
Wheelbase9.52 ft
Hinge Pin - Max Height13.98 ft
Reach At Max Lift And Dump3.34 ft
Engine
Number Of Cylinders6
Engine ModelFamily III 668TA/M2
Net Power136 hp
Gross Power146 hp
Power Measured @2,000 rpm
Max Torque495 lb-ft
Displacement409 cu in
Torque Measured @1,200 rpm
Aspirationturbocharged and air to air cooled
Torque Rise33 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30.1 gal
Engine Oil Fluid Capacity4.3 gal
Cooling System Fluid Capacity6.4 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Static Tipping Weight18,389 lb
Turning Radius17 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward24 mph
Max Speed - Reverse15.6 mph
Hydraulic System
Relief Valve Setting3,600 psi
Pump Flow Capacity45.2 gpm
Raise Time5.4 sec
Dump Time1.5 sec
Lower Time5 sec
Pump Typeclosed centered pressure/flow compensated
Additional specifications
Bucket Width8.54 ft
Ground Clearance1.56 ft
Length With Bucket On Ground24.43 ft
Operating Weight26,364 lb
Tire Size20.5x25 L3
Transmission Type4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation

Source

621DXT
SpecificationSource figure
Bucket
Dump Clearance At Max Raise9.44 ft
Bucket Capacity - Struck2.5 yd3
Breakout Force26,739 lb
Dimensions and weight
Width Over Tires7.82 ft
Height To Top Of Cab10.85 ft
Wheelbase9.52 ft
Hinge Pin - Max Height13 ft
Reach At Max Lift And Dump3.75 ft
Engine
Number Of Cylinders6
Engine Model668TA/M2
Net Power136 hp
Gross Power148 hp
Power Measured @2,000 rpm
Max Torque509 lb-ft
Displacement409 cu in
Torque Measured @1,200 rpm
AspirationTurbocharged with Aftercooler
Torque Rise33 %
Operational
Fuel Capacity50 gal
Hydraulic System Fluid Capacity30 gal
Engine Oil Fluid Capacity4.3 gal
Cooling System Fluid Capacity6.3 gal
Transmission Fluid Capacity5 gal
Front Axle/Diff Fluid Capacity5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal
Static Tipping Weight20,318 lb
Turning Radius17 ft
Operating Voltage24 V
Alternator Supplied Amperage70 amps
Rear Axle Oscillation24 degrees
Transmission and speeds
Number Of Forward Gears4
Number Of Reverse Gears3
Max Speed - Forward24 mph
Max Speed - Reverse15.6 mph
Hydraulic System
Relief Valve Setting3,625 psi
Pump Flow Capacity45.2 gpm
Raise Time5.4 sec
Dump Time1.7 sec
Lower Time4.4 sec
Pump Typeclosed centered variable displacement
Additional specifications
Ground Clearance1.56 ft
Length With Bucket On Ground23.37 ft
Operating Weight27,877 lb
Tire Size20.5x25

Source

Compare CASE 521D, 521DXT, 521E, 521EXR, 521EXT, 521F, 621D, 621DXR, 621DXT
Dimensions and weight
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Ground Clearance1.24 ft1.24 ft1.24 ft1.24 ft1.24 ft1.24 ft1.56 ft1.56 ft1.56 ft
Width Over Tires7.58 ft7.58 ft8.17 ft8.17 ft8.17 ft8.17 ft7.82 ft7.82 ft7.82 ft
Height To Top Of Cab10.41 ft10.41 ft10.76 ft10.76 ft10.76 ft10.76 ft10.85 ft10.85 ft10.85 ft
Wheelbase9.03 ft9.03 ft9.03 ft9.03 ft9.03 ft9.03 ft9.52 ft9.52 ft9.52 ft
Hinge Pin - Max Height11.82 ft12.27 ft11.84 ft13.09 ft12.29 ft11.85 ft12.59 ft13.98 ft13 ft
Reach At Max Lift And Dump3.47 ft3.69 ft3.16 ft3.08 ft3.67 ft4.67 ft3.33 ft3.34 ft3.75 ft
Engine
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Number Of Cylinders444444666
Engine ModelFamily III 445TA/M2, Tier II certifiedFamily III 445TA/M2, Tier II certified445TA/EGE445TA/EGE445TA/EGEFPT F4HFE413NBFamily III 668TA/M2Family III 668TA/M2668TA/M2
Net Power110 hp110 hp118 hp118 hp118 hp131 hp136 hp136 hp136 hp
Gross Power119 hp119 hp129 hp129 hp129 hp142 hp148 hp146 hp148 hp
Max Torque336 lb-ft336 lb-ft407 lb-ft407 lb-ft407 lb-ft448.5 lb-ft495 lb-ft495 lb-ft509 lb-ft
Displacement275 cu in275 cu in274 cu in274 cu in274 cu in274.7 cu in409 cu in409 cu in409 cu in
Torque Rise14 %14 %19 %19 %19 %21 %33 %33 %33 %
Operational
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Operating Weight22,109 lb23,938 lb23,069 lb23,442 lb26,861 lb22,855 lb26,083 lb26,364 lb27,877 lb
Fuel Capacity50 gal50 gal50 gal50 gal50 gal50 gal50 gal50 gal50 gal
Cooling System Fluid Capacity5.8 gal5.8 gal5.9 gal5.9 gal5.9 gal5.9 gal6.4 gal6.4 gal6.3 gal
Transmission Fluid Capacity5 gal5 gal5 gal5 gal5 gal5 gal5 gal5 gal5 gal
Front Axle/Diff Fluid Capacity5.9 gal5.9 gal5.7 gal5.7 gal5.7 gal5.9 gal5.9 gal5.9 gal5.9 gal
Rear Axle/Diff Fluid Capacity5.9 gal5.9 gal5.7 gal5.7 gal5.7 gal5.9 gal5.9 gal5.9 gal5.9 gal
Operating Voltage24 V24 V24 V24 V24 V24 V24 V24 V24 V
Rear Axle Oscillation24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees24 degrees
Transmission and speeds
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Number Of Forward Gears444444444
Number Of Reverse Gears333333333
Max Speed - Forward23.4 mph23.4 mph22.3 mph22.3 mph22.3 mph22.3 mph24 mph24 mph24 mph
Hydraulic System
Specification521D521DXT521E521EXR521EXT521F621D621DXR621DXT
Pump Flow Capacity35.4 gpm35.4 gpm35.4 gpm35.4 gpm35.4 gpm35.4 gpm45.2 gpm45.2 gpm45.2 gpm

More in CASE: 621FXT–821B, 621B–621CXR, 621G–921G.