Machine models
CASE 580T: mechanical injection, twin pumps and loader capacities
580T mechanical injection, twin pumps and loader equipment
The 580T and 580ST do not have identical fuel and hydraulic systems. CASE's original T-Series brochure gives the T mechanical direct injection and a twin-gear pump. The ST uses common-rail injection and a variable-displacement pump.
A diagnostic procedure or advertised maximum delivery taken from the ST needs checking before it is applied to the T.
The loader table also separates the standard bucket from the multifunction bucket. Their full-height lifting capacities and bucket-cylinder breakout forces differ. Breakout is a force; it is not the mass the loader can carry at full height.
The unusually large earlier pound figure below is retained as an identified catalogue error alongside the manufacturer's equipment-specific figures.
Rear equipment has separate limits. The brochure distinguishes a standard or retracted dipper from an extended dipper, with different maximum reach and lifting capacity. An optional handling kit adds hose-burst valves and an overload warning device with the lifting hook.
A hook on its own does not establish that the complete handling equipment is fitted.
Source: CASE T-Series brochure, 26061122GB.The operator's manual gives the mechanically governed 580T a different side-instrument layout from the electronic-engine models. During an inspection, identify the installed engine plate and control layout together. A page covering the whole T range can contain instructions expressly for another model.
Powershuttle and Powershift controls are presented separately. The manual also distinguishes two-wheel-steer and four-wheel-steer equipment, plus side-shift and center-pivot backhoes. Match those headings before using a control illustration or maintenance quantity.
Similar-looking cab switches do not establish the same drivetrain.
Auxiliary tool flow needs a separate check from main pump flow. The manual identifies supply and return couplings for hand-held hydraulic tools and specifies flow selection to the tool manufacturer's requirement. Excess flow can damage a tool, and reversing the connections can cause unintended operation.
Have the fitted circuit and flow regulator checked with the machine safely immobilized; the headline pump capacity is not an attachment setting.
Source: CASE operator's manual, 84127619.| Model and field | Earlier entry | Manufacturer figure and scope | Source |
|---|---|---|---|
| 580T Bucket Breakout Force | 913,174 lb | 6545 daN with standard loader bucket;6650 daN with4-in-1/6-in-1 bucket, original26061122GB p12. Earlier913174lb entry is erroneous. These are forces, not full-height lift capacities. | Original document |
| 580T Lift Capacity At Full Height | 5,507 lb | 3450 kg standard loader bucket or3195 kg multifunction bucket in original26061122GB p12; load-centre lifting capacity4830/4610 kg is a separate row. Configuration-specific, not earlier5507lb universal rating. | Original document |
| 580T Net Max Torque | 334.2 lb-ft | 400 N m at1400 rpm for445TA/ML5 in original26061122GB. Operator book84127619 F4GE9484C601 edition separately420 N m1250rpm; do not mix engines. Earlier334.2lb-ft retained in history. | Original document |
| 580T Net Power | 97 hp | 72 kW (97 hp) under ISO 14396, original26061122GB; source labels engine power, not net output under an accessories-installed test. | Original document |
| 580T Fuel Capacity | 33.3 gal | 145 L, original26061122GB and84127619 two-wheel-steer supply table; earlier33.3gal entry retained as catalogue history, not a verified fuel fill. | Original document |
| 580T Hydraulic System Fluid Capacity | 31.2 gal | 126 L in26061122GB580T column; operator84127619 supply table separately140 L for2WS and118 L for4WS. Edition/configuration must match; earlier31.2gal is not a universal580T system refill. | Original document |
| 580T Pump Flow Capacity | 41.3 gpm | 151 L/min at2200rpm, twin gear pump withtwo bodies, original26061122GB580T column.6–156 L/min variable delivery is ST specification, not this T pump. | Original document |
| 580T Oil System Fluid Capacity | 3.6 gal | 14 L engine oil withfilter for2WS in84127619 supply table;4WS12.8 L separate. Earlier3.6gal preserved as earlierreference; confirminstalledengine beforefill. | Original document |
| 580T Transmission Fluid Capacity | 4.9 gal | Powershuttle18.5 L2WD or20.8 L4WD, original84127619; gallon column mixes gallon conventions, use actual metric quantity and fitted transmission. | Original document |
| 580T Rear Axle Fluid Capacity | 4.4 gal | 15.5 L rear differential580T/580ST in84127619; brochure26061122GB lists21.2 L totalrearaxle. Different boundaries, not a single interchangeable fill. | Original document |
| Listing-entry count |
|---|
| 1 |
Short answer
CASE 580T: mechanical injection, twin pumps and loader capacities: backhoe loader.
| Configuration | Documented field and quantity |
|---|---|
| 580T |
|
| Specification | 580T |
|---|---|
| Reach From Swivel - Std | 18.58 ft |
| Dig Depth - Std | 14.6 ft |
| Reach From Swivel - Ext | 20.72 ft |
| Dig Depth - Ext | 18.47 ft |
| Specification | 580T |
|---|---|
| Transport Width | 7.98 ft |
| Transport Height | 11.47 ft |
| Wheelbase | 7.14 ft |
| Ground Clearance | 1.15 ft |
| Height To Top Of Suspended Cab | 9.68 ft |
| Specification | 580T |
|---|---|
| Clearance At Max Dump Height | 8.81 ft |
| Reach At Max Dump Height | 2.73 ft |
| Dig Depth | 4.73 in |
| Lift Capacity At Full Height | 3450 kg standard loader bucket or3195 kg multifunction bucket in original26061122GB p12; load-centre lifting capacity4830/4610 kg is a separate row. Configuration-specific, not earlier5507lb universal rating. |
| Bucket Breakout Force | 6545 daN with standard loader bucket;6650 daN with4-in-1/6-in-1 bucket, original26061122GB p12. Earlier913174lb entry is erroneous. These are forces, not full-height lift capacities. |
| Specification | 580T |
|---|---|
| Number Of Cylinders | 4 |
| Engine Make | FPT NEF4 |
| Engine Model | 445TA/ML5 |
| Engine Power (ISO 14396) | 72 kW (97 hp) under ISO 14396, original26061122GB; source labels engine power, not net output under an accessories-installed test. |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Maximum Torque (EC 97/68 edition-qualified) | 400 N m at1400 rpm for445TA/ML5 in original26061122GB. Operator book84127619 F4GE9484C601 edition separately420 N m1250rpm; do not mix engines. Earlier334.2lb-ft retained in history. |
| Displacement | 274.7 cu in |
| Bore | 4.1 in |
| Stroke | 5.2 in |
| Specification | 580T |
|---|---|
| Fuel Capacity | 145 L, original26061122GB and84127619 two-wheel-steer supply table; earlier33.3gal entry retained as catalogue history, not a verified fuel fill. |
| Max Weight | 19,103 lb |
| Hydraulic System Fluid Capacity | 126 L in26061122GB580T column; operator84127619 supply table separately140 L for2WS and118 L for4WS. Edition/configuration must match; earlier31.2gal is not a universal580T system refill. |
| Engine Oil With Filter (manual2WS scope) | 14 L engine oil withfilter for2WS in84127619 supply table;4WS12.8 L separate. Earlier3.6gal preserved as earlierreference; confirminstalledengine beforefill. |
| Cooling System Fluid Capacity | 6.4 gal |
| Transmission Fluid Capacity | Powershuttle18.5 L2WD or20.8 L4WD, original84127619; gallon column mixes gallon conventions, use actual metric quantity and fitted transmission. |
| Rear Axle Fluid Capacity | 15.5 L rear differential580T/580ST in84127619; brochure26061122GB lists21.2 L totalrearaxle. Different boundaries, not a single interchangeable fill. |
| Turning Radius | 14.2 ft |
| Tire Size Front - 2wd / 4wd | 18 in |
| Rear Tires Size 2wd/4wd | 28 in |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 120 amps |
| Specification | 580T |
|---|---|
| Transmission Type | Powershuttle |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.9 mph |
| Max Speed Reverse | 29.3 mph |
| Specification | 580T |
|---|---|
| Pump Flow Capacity | 151 L/min at2200rpm, twin gear pump withtwo bodies, original26061122GB580T column.6–156 L/min variable delivery is ST specification, not this T pump. |
| Relief Valve Pressure | 2,973 psi |
| Figure | 580T |
|---|---|
| Engine horsepower per 1,000 lb of weight | 5.1 |
| Pump flow per engine horsepower | 0.43 gpm |
| Fuel tank per engine horsepower | 0.34 gal |
| Equipment group | backhoe loader |
|---|
| Brand | Equipment group | Compared entry | Sort order |
|---|---|---|---|
| CASE | backhoe loader | 580T | Descending quantity; 1 is largest |
| Figure | 580T | Rank | Lowest in line | Highest in line |
|---|---|---|---|---|
| Engine power | 97.0 hp | 3 of 14 | 37.0 hp | 111.0 hp |
| Listed weight | 19,103 lb | 1 of 12 | 8,950 lb | 19,103 lb |
| Pump flow | 41.3 gpm | 3 of 12 | 10.0 gpm | 44.4 gpm |
| Fuel capacity | 33.3 gal | 5 of 11 | 22.0 gal | 42.0 gal |
| Horsepower per 1,000 lb | 5.1 hp | 8 of 12 | 4.1 hp | 6.5 hp |
| Base version | 680H | 580T | 780 |
|---|---|---|---|
| Engine power | 80 hp | 97 hp | 111 hp |
| Weight | 15,855 lb | 19,103 lb | 17,000 lb |
| Pump flow | 26 gpm | 41.3 gpm | 23 gpm |
| Fuel capacity | 33 gal | 33.3 gal | 35 gal |
| Wheelbase | 7.26 ft | 7.14 ft | 7.26 ft |
580T: owner reports
Related account: “Hydraulic power, leaks and steering pump”: 480B to 580D.
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | backhoe loader | CASE and the 580 line that the 580T belongs to (no title names the exact model) | 761 |
| Title topic | Titles |
|---|---|
| hydraulics | 87 |
| transmission and drive | 57 |
| brakes and steering | 39 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| hydraulics | 87 | 11% |
| transmission and drive | 57 | 7% |
| brakes and steering | 39 | 5% |
| fuel system | 31 | 4% |
| electrical and sensors | 25 | 3% |
- Case 580 Forklift (Heavy Equipment Forums, 2026-09-17)
- Mounting Diverter Splitter Valve Case 580 Super M (Heavy Equipment Forums, 2026-08-29)
- Case 580 Super L Wont Start 12v On Ignition Switch Drops To 0v When Switch Is On (Heavy Equipment Forums, 2026-08-14)
- Replacing Hydraulic Hoses On Case 580 B Backhoe (Heavy Equipment Forums, 2026-08-02)
| Date | Listing index | Equipment class | Names queried | Result |
|---|---|---|---|---|
| 2026-09-24 | MachineryTrader (machinerytrader.com) | backhoe loader | 580T | No matching offers in this snapshot |
| Date | Database | Names queried | Result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | CASE; 580T | No matching recall in the stated search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Forum threads |
|
| Federal agency data |
|
CASE 580T: mechanical injection, twin pumps and loader capacities: Configuration records
580T
| Specification | Source figure |
|---|---|
| Backhoe | |
| Reach From Swivel - Std | 18.58 ft |
| Dig Depth - Std | 14.6 ft |
| Dig Depth - Ext | 18.47 ft |
| Reach From Swivel - Ext | 20.72 ft |
| Dimensions and weight | |
| Transport Width | 7.98 ft |
| Transport Height | 11.47 ft |
| Wheelbase | 7.14 ft |
| Ground Clearance | 1.15 ft |
| Height To Top Of Suspended Cab | 9.68 ft |
| Loader | |
| Clearance At Max Dump Height | 8.81 ft |
| Reach At Max Dump Height | 2.73 ft |
| Dig Depth | 4.73 in |
| Bucket Breakout Force | 6545 daN with standard loader bucket;6650 daN with4-in-1/6-in-1 bucket, original26061122GB p12. Earlier913174lb entry is erroneous. These are forces, not full-height lift capacities. [source] |
| Lift Capacity At Full Height | 3450 kg standard loader bucket or3195 kg multifunction bucket in original26061122GB p12; load-centre lifting capacity4830/4610 kg is a separate row. Configuration-specific, not earlier5507lb universal rating. [source] |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | 445TA/ML5 |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Displacement | 274.7 cu in |
| Engine Make | FPT NEF4 |
| Bore | 4.1 in |
| Stroke | 5.2 in |
| Operational | |
| Fuel Capacity | 145 L, original26061122GB and84127619 two-wheel-steer supply table; earlier33.3gal entry retained as catalogue history, not a verified fuel fill. [source] |
| Max Weight | 19,103 lb |
| Hydraulic System Fluid Capacity | 126 L in26061122GB580T column; operator84127619 supply table separately140 L for2WS and118 L for4WS. Edition/configuration must match; earlier31.2gal is not a universal580T system refill. [source] |
| Cooling System Fluid Capacity | 6.4 gal |
| Transmission Fluid Capacity | Powershuttle18.5 L2WD or20.8 L4WD, original84127619; gallon column mixes gallon conventions, use actual metric quantity and fitted transmission. [source] |
| Rear Axle Fluid Capacity | 15.5 L rear differential580T/580ST in84127619; brochure26061122GB lists21.2 L totalrearaxle. Different boundaries, not a single interchangeable fill. [source] |
| Turning Radius | 14.2 ft |
| Tire Size Front - 2wd / 4wd | 18 in |
| Rear Tires Size 2wd/4wd | 28 in |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 120 amps |
| Transmission and speeds | |
| Transmission Type | Powershuttle |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.9 mph |
| Max Speed Reverse | 29.3 mph |
| Hydraulic | |
| Pump Flow Capacity | 151 L/min at2200rpm, twin gear pump withtwo bodies, original26061122GB580T column.6–156 L/min variable delivery is ST specification, not this T pump. [source] |
| Relief Valve Pressure | 2,973 psi |
| Additional specifications | |
| Engine Power (ISO 14396) | 72 kW (97 hp) under ISO 14396, original26061122GB; source labels engine power, not net output under an accessories-installed test. [source] [source] |
| Maximum Torque (EC 97/68 edition-qualified) | 400 N m at1400 rpm for445TA/ML5 in original26061122GB. Operator book84127619 F4GE9484C601 edition separately420 N m1250rpm; do not mix engines. Earlier334.2lb-ft retained in history. [source] [source] |
| Engine Oil With Filter (manual2WS scope) | 14 L engine oil withfilter for2WS in84127619 supply table;4WS12.8 L separate. Earlier3.6gal preserved as earlierreference; confirminstalledengine beforefill. [source] [source] |
More in CASE: 780, 680K/680L/780D: refill boundaries/lift charts/component identity, 580 Super N/580 Super N WT/590 Super N specs.