Case IH model reference

The Case IH CIH03281601 brochure specifies an 85 in overall baler width and 2950 lb machine weight for the RB444 reference. Its bale-weight range is 300–750 lb. The smaller pickup measurement and the finished bale weight cannot describe the complete baler on a trailer.

RB444: pickup width, baler width and bale weight

The same brochure specifies a 40 hp minimum PTO requirement, 540 rpm PTO and one hydraulic remote. Match these to tractor PTO output and connections; engine horsepower alone does not establish compatibility. Bale diameter adjusts from 30 to 48 in, with a 46.5 in bale width.

Farmall loaders have their own rating points

Case IH’s L360A loader reference pairs that loader with compact Farmall 45C, 50C and 55C tractors and advertises up to 1830 lb lift. That loader figure does not describe rear-hitch capacity or a load carried at any arbitrary fork reach. Use the attachment chart and the tractor’s ballast requirements for the actual job.

Massey Ferguson specifications · New Holland specifications · Tractor and compact equipment models: Model directory

Case IH 7230 to Axial-Flow 8010

Model	Selected specifications
7230	Power 380 hp Overall Length 23 ft Engine Model FPT
Case IH 8230	Power 450 hp Operating Weight W/O Attachment 37,500 lb Overall Length 23 ft
Axial-Flow 7010	Power 350 hp Operating Weight W/O Attachment 34,500 lb Height To Top Of Isomount Cab 12.41 ft
Axial-Flow 8010	Power 400 hp Operating Weight W/O Attachment 35,500 lb Height To Top Of Isomount Cab 12.41 ft

Buying and ownership: Case IH 7230 to Axial-Flow 8010

TractorHouse listings for Case IH 7230 — Used-machine listings

Case IH Axial-Flow 2577 and Axial-Flow 2588

Model	Selected specifications
Axial-Flow 2577	Power 265 hp Operating Weight W/O Attachment 30,000 lb Width Over Tires 11.01 ft
Axial-Flow 2588	Power 305 hp Operating Weight W/O Attachment 30,000 lb Width Over Tires 11.01 ft

Case IH AXIAL-FLOW 5140 to AXIAL-FLOW 9240

Model	Selected specifications
AXIAL-FLOW 5140	Maximum Horsepower 308 hp Feeder Width 45.6 in Emission Tier Level Tier 4B / Final
AXIAL-FLOW 6140	Maximum Horsepower 411 hp Feeder Width 45.6 in Emission Tier Level Tier 4B / Final
AXIAL-FLOW 7140	Maximum Horsepower 442 hp Feeder Width 45.6 in Emission Tier Level Tier 4B / Final
AXIAL-FLOW 7240	Maximum Horsepower 468 hp Feeder Width 54.1 in Emission Tier Level Tier 4B / Final
AXIAL-FLOW 8240	Maximum Horsepower 555 hp Feeder Width 54.1 in Emission Tier Level Tier 4B / Final
AXIAL-FLOW 9240	Maximum Horsepower 625 hp Feeder Width 54.1 in Emission Tier Level Tier 4B / Final

Case IH Farmall 110A to Vestrum 130

Model	Selected specifications
Farmall 110A	Power (gross) 110 hp Weight Lower 8003 lb Upper 9348 lb Pump flow 22 gpm
Farmall 120A	Power (gross) 118 hp Weight Lower 8091 lb Upper 9524 lb Pump flow 22 gpm
Farmall 120U	Power 117 hp Weight 10,031 lb Pump flow 21.1 gpm
Farmall 125A	Power (gross) 125 hp Weight Lower 9061 lb Upper 10406 lb Pump flow 22 gpm
Case IH Maxxum 115	Rated Power (gross) 115 hp Weight Lower 9466 lb Upper 10900 lb Pump flow 16.6 gpm
Case IH Maxxum 120	Rated Power (gross) 129 hp Weight Lower 10626 lb Upper 12465 lb Pump flow 26.5 gpm
Case IH Maxxum 125	Rated Power (gross) 125 hp Weight Lower 9466 lb Upper 12270 lb Pump flow 16.6 gpm
Maxxum 130	Rated Power (gross) 130 hp Weight Lower 10626 lb Upper 12465 lb Pump flow 26.5 gpm
Vestrum 100	Rated Power (gross) 98.6 hp Weight 12,900 lb Pump flow 29.1 gpm
Vestrum 110	Rated Power (gross) 108.5 hp Weight 12,900 lb Pump flow 29.1 gpm
Vestrum 120	Rated Power (gross) 118.4 hp Weight 12,900 lb Pump flow 29.1 gpm
Vestrum 130	Rated Power (gross) 128.2 hp Weight 12,900 lb Pump flow 29.1 gpm

Buying and ownership: Case IH Farmall 110A to Vestrum 130

TractorByNet: Maxxum 125 reviews
TractorHouse listings for Case IH Farmall 110A — Used-machine listings

Case IH Farmall 110M to Luxxum 120

Model	Selected specifications
Farmall 110M	Power 110 hp Rear lift 8,809 lb Engine FPT 3.4L 4-cyl diesel
Farmall 110N	Power (gross) 106 hp Weight Lower 5498 lb Upper 6292 lb Pump flow 16.9 gpm
Farmall 110V	Power (gross) 106 hp Weight Lower 5307 lb Upper 6151 lb Pump flow 16.9 gpm
Farmall 120M	Power 120 hp Rear lift 8,809 lb Engine FPT 3.4L 4-cyl diesel
Luxxum 100	Rated Power (gross) 99 hp Weight 9,678 lb Pump flow 21.1 gpm
Luxxum 110	Rated Power (gross) 107 hp Weight 9,678 lb Pump flow 21.1 gpm
Luxxum 120	Rated Power (gross) 117 hp Weight 9,678 lb Pump flow 21.1 gpm

Buying and ownership: Case IH Farmall 110M to Luxxum 120

TractorHouse listings for Case IH Farmall 110M — Used-machine listings

Case IH Farmall 25A to Farmall 50C

Model	Selected specifications
Farmall 25A	Power (gross) 24.6 hp Weight 2,469 lb Pump flow 7.9 gpm
Farmall 25SC	Power (gross) 24.7 hp Weight Lower 1444 lb Upper 1884 lb Rear lift (at 24"/610mm) 728 lb
Farmall 30B	Power (gross) 28 hp Weight 3,121 lb Pump flow 8.2 gpm
Farmall 30C	Power 32.2 hp Weight 3,218 lb Pump flow 7.3 gpm
Farmall 35A Series II	Power 35 hp Weight 3,067 lb Pump flow 8.2 gpm
Farmall 35C	Power 36.2 hp Weight Lower 3218 lb Upper 3589 lb Pump flow 7.3 gpm
Farmall 31	Power (gross) 31 hp Weight Lower 2511 lb Upper 2544 lb Pump flow 7.2 gpm
Farmall 35	Power (gross) 35 hp Weight 2,526 lb Pump flow 7.2 gpm
Farmall 35B	Power (gross) 38 hp Weight 3,200 lb Pump flow 8.2 gpm
Farmall 40	Power (gross) 40 hp Weight Lower 3252 lb Upper 4402 lb Pump flow 9.8 gpm
Farmall 40A Series II	Power 40 hp Weight 3,067 lb Pump flow 8.2 gpm
Farmall 40B	Power (gross) 41 hp Weight 3,725 lb Pump flow 8.2 gpm
Farmall 40C	Power 40.2 hp Weight Lower 3869 lb Upper 4380 lb Pump flow 8.2 gpm
Farmall 45	Power (gross) 45 hp Weight Lower 3454 lb Upper 4491 lb Pump flow 9.8 gpm
Farmall 50C	Power 45.6 hp Weight Lower 3869 lb Upper 4380 lb Pump flow 8.2 gpm
Farmall 45A	Power (gross) 45 hp Weight Lower 3527 lb Upper 3836 lb Pump flow 11.6 gpm
Farmall 50	Power (gross) 50 hp Weight Lower 3522 lb Upper 4136 lb Pump flow 9.8 gpm
Farmall 50B	Power (gross) 47 hp Weight 3,800 lb Pump flow 8.2 gpm

Buying and ownership: Case IH Farmall 25A to Farmall 50C

Discussion: farmall 35b accelerator will not stay in place — Owner discussion
Discussion: case farmall 31 clutch noise — Owner discussion
2016 Case Ih Case Farmall 40c — Owner discussion
I Have A Caseih Farmall31 And Am Looking To Add A Step To The Left Under Side Platform Does Anyone Know Of Nice Aftermarket Steps That I CAN Buy — Owner discussion
2008 Farmall 35 With Bad HST Pump — Owner discussion
Farmall 31 — Owner discussion
TractorByNet owner reviews for Case IH FARMALL35 — Owner reviews
TractorHouse listings for Case IH Farmall 25A — Used-machine listings

Case IH Farmall 45C CVT to Farmall 55C Series II

Model	Selected specifications
Farmall 45C CVT	Power 46 hp Weight Lower 4190 lb Upper 4940 lb Pump flow 9.8 gpm
Farmall 45C Series II	Power 45 hp Weight Lower 3770 lb Upper 4453 lb Pump flow 8.2 gpm
Farmall 55C CVT	Power 54 hp Weight Lower 4190 lb Upper 4940 lb Pump flow 9.8 gpm
Farmall 55C Series II	Power 55 hp Weight Lower 3770 lb Upper 4453 lb Pump flow 8.2 gpm

Buying and ownership: Case IH Farmall 45C CVT to Farmall 55C Series II

Case Farmall 55c CVT Filters — Owner discussion
Case Farmall 55c CVT — Owner discussion
2016 New Holland 54d CVT Pricing Vs 2017 Ci Farmall 55c CVT Pricing — Owner discussion
TractorHouse listings for Case IH Farmall 45C CVT — Used-machine listings

Case IH Farmall 50A to Farmall 80

Model	Selected specifications
Farmall 50A	Power (gross) 53 hp at2600rpm,2019 utility A brochure Weight Lower 4442 lb Upper 5060 lb Pump flow 11.9 gpm
Farmall 60A	Power (gross) 60 hp Weight Lower 4442 lb Upper 5060 lb Pump flow 11.9 gpm
Farmall 65C	Power (gross) 64 hp Weight Lower 5776 lb Upper 6768 lb Pump flow 12.8 gpm
Farmall 70	Power (gross) 65 hp Weight Lower 5152 lb Upper 6365 lb Pump flow 13.6 gpm
Farmall 70A	Power (gross) 70 hp Weight Lower 4442 lb Upper 5060 lb Pump flow 11.9 gpm
Farmall 80	Power (gross) 72 hp Weight Lower 5702 lb Upper 6915 lb Pump flow 13.6 gpm

Buying and ownership: Case IH Farmall 50A to Farmall 80

Farmall 70a Neutral Start Switch — Owner discussion
Farmall 70a Brake Bellows Replacement — Owner discussion
Farmall 70a Dtc 3157 Resolved — Owner discussion
Farmall 70a Front Ballast — Owner discussion
TractorByNet: Farmall 80 reviews
TractorHouse listings for Case IH Farmall 50A — Used-machine listings

Case IH Farmall 55A to Farmall 75N

Model	Selected specifications
Farmall 55A	Power (gross) 55 hp Weight Lower 3770 lb Upper 4385 lb Pump flow 11.6 gpm
Farmall 65A	Power (gross) 65 hp Weight Lower 5059 lb Upper 5688 lb Pump flow 10.4 gpm
Farmall 75A	Power (gross) 75 hp Weight Lower 5059 lb Upper 5688 lb Pump flow 10.4 gpm
Farmall 75N	Power (gross) 76 hp Weight Lower 5027 lb Upper 5886 lb Pump flow 12.7 gpm

Buying and ownership: Case IH Farmall 55A to Farmall 75N

Farmall 75a Alternator Need Help — Owner discussion
Farmall 75a Low Power — Owner discussion
New Holland Workmaster Or Case Farmall 75a Fuel Tank Tractor Runs Then Dies — Owner discussion
Farmall 75a 75c — Owner discussion
TractorByNet owner reviews for Case IH FARMALL65A — Owner reviews
TractorHouse listings for Case IH Farmall 55A — Used-machine listings

Case IH Farmall 75C to Farmall 140A

Model	Selected specifications
Farmall 75C	Power (gross) 76 hp Weight Lower 5776 lb Upper 6768 lb Pump flow 12.8 gpm
Farmall 80CL	Power 74 hp Pump flow 16.9 gpm Rear lift 1,433 lb
Farmall 80N	Power (gross) 74 hp Weight Lower 5300 lb Upper 6094 lb Pump flow 16.9 gpm
Farmall 80V	Power (gross) 74 hp Weight Lower 5108 lb Upper 5975 lb Pump flow 16.9 gpm
Farmall 90CL	Power 85 hp Pump flow 16.9 gpm Rear lift 1,433 lb
Farmall 95A	Power 97 hp Weight Lower 7304 lb Upper 8492 lb Pump flow 16.9 gpm
Farmall 95N	Power (gross) 95 hp Weight Lower 5820 lb Upper 6107 lb Pump flow 12.7 gpm
Farmall 100CL	Power 98 hp Pump flow 16.9 gpm Rear lift 1,433 lb
Farmall 100N	Power (gross) 98 hp Weight Lower 5498 lb Upper 6292 lb Pump flow 16.9 gpm
Farmall 105N	Power (gross) 106 hp Weight Lower 5820 lb Upper 6107 lb Pump flow 16.9 gpm
Farmall 105V	Power (gross) 106 hp Weight Lower 5979 lb Upper 6151 lb Pump flow 16.9 gpm
Farmall 110CL	Power 106 hp Pump flow 16.9 gpm Rear lift 1,433 lb
Farmall 115A	Power 120 hp Weight Lower 7304 lb Upper 8492 lb Pump flow 16.9 gpm
Farmall 120C	Power (gross) 117 hp Weight Lower 6989 lb Upper 8157 lb Rear lift (at 24"/610mm) 4,339 lb
Farmall 140A	Power (gross) 140 hp Weight Lower 9061 lb Upper 10406 lb Pump flow 22 gpm
Farmall 120CL	Power 119 hp Pump flow 16.9 gpm Rear lift 1,433 lb
Farmall 130A	Power 130 hp Weight Lower 9660 lb Upper 10605 lb Pump flow 22 gpm

Buying and ownership: Case IH Farmall 75C to Farmall 140A

Case Farmall 75c 2018 Air Conditioner Issue — Owner discussion
Farmall 120c — Owner discussion
TractorHouse listings for Case IH Farmall 75C — Used-machine listings

Case IH Farmall 85C to Magnum 335

Model	Selected specifications
Farmall 85C	Power (gross) 84 hp Weight Lower 6503 lb Upper 6944 lb Pump flow 16.1 gpm
Farmall 90	Power (gross) 84 hp Weight Lower 5702 lb Upper 6915 lb Pump flow 13.6 gpm
Farmall 90C	Power (gross) 86 hp Weight Lower 6989 lb Upper 8157 lb Pump flow 16.9 gpm; 2018 North American implement-pump specification
Farmall 95	Power (gross) 90 hp Weight Lower 6107 lb Upper 7320 lb Pump flow 13.6 gpm
Farmall 95C	Power (gross) 95 hp Weight Lower 6614 lb Upper 8115 lb Pump flow 16.1 gpm
Farmall 100C	Power (gross) 99 hp Weight Lower 6989 lb Upper 8157 lb Pump flow 16.9 gpm; 2018 North American implement-pump specification
Farmall 105A	Power 112 hp Weight Lower 7304 lb Upper 8492 lb Pump flow 16.9 gpm
Farmall 105C	Power 106 hp Weight 7,937 lb Pump flow 12.9 gpm
Farmall 110C	Power (gross) 107 hp Weight Lower 6989 lb Upper 8157 lb Pump flow 16.9 gpm; 2018 North American implement-pump specification
Farmall 110U	Power 107 hp Weight 10,031 lb Pump flow 21.1 gpm
Farmall 115C	Power 115 hp Weight 7,937 lb Pump flow 12.9 gpm
Farmall 115U	Power (gross) 115 hp Weight 9,370 lb Pump flow 16.1 gpm
Magnum 215	Power 221 hp Weight Lower 20100 lb Upper 21035 lb Rear lift 14,070 lb
Magnum 245	Power 248 hp Weight Lower 20100 lb Upper 21010 lb Rear lift 14,070 lb
Magnum 275	Power 275 hp Weight Lower 20630 lb Upper 21570 lb Rear lift 14,070 lb
Magnum 305	Power 304 hp Weight Lower 20630 lb Upper 21585 lb Rear lift 14,070 lb
Magnum 335	Power 330 hp Weight 21,350 lb Pump flow 46.2 gpm

Buying and ownership: Case IH Farmall 85C to Magnum 335

Case Farmall 95 Pump Or Injector Troubles — Owner discussion
2010 Case Ih Farmall 95 Purchase Questions — Owner discussion
John Deere 5090m Or Case Farmall 100c — Owner discussion
TractorByNet: Farmall 95 reviews
TractorHouse listings for Case IH Farmall 85C — Used-machine listings

Case IH Farmall 85U to Puma 240

Model	Selected specifications
Farmall 85U	Power (gross) 85 hp Weight Lower 6393 lb Upper 7496 lb Pump flow 16.1 gpm
Farmall 95U	Power (gross) 95 hp Pump flow 16.1 gpm Rear lift (at 24"/610mm) 5,745 lb
Farmall 105U	Power (gross) 105 hp Pump flow 16.1 gpm Rear lift (at 24"/610mm) 5,745 lb
Case IH JXU 75	Rated Power (gross) 75.1 hp Weight 8,929 lb Pump flow 16.1 gpm
Case IH JXU 85	Rated Power (gross) 84.5 hp Weight 8,929 lb Pump flow 16.1 gpm
Case IH JXU 95	Rated Power (gross) 95.2 hp Weight 9,369 lb Pump flow 16.1 gpm
Case IH JXU 105	Rated Power (gross) 104.6 hp Weight 9,369 lb Pump flow 16.1 gpm
Case IH JXU 115	Rated Power (gross) 111.3 hp Weight 9,369 lb Pump flow 16.1 gpm
Maxxum 100	Rated Power (gross) 99 hp Weight 10,560 lb Pump flow 21.1 gpm (open center)
Maxxum 110	Rated Power (gross) 110 hp Weight Lower 9202 lb Upper 11345 lb Pump flow 16.6 gpm
Magnum 200	Rated Power (gross) 200 hp Weight 20,705 lb Pump flow 41 gpm
Magnum 220	Rated Power (gross) 220 hp Weight 21,750 lb Pump flow 41 gpm
Magnum 225	Rated Power (gross) 224 hp Weight 19,000 lb Pump flow 37.5 gpm (early)
Magnum 240	Rated Power (gross) 240 hp Weight 22,305 lb Pump flow 43 gpm
Puma 165 X	Rated Power (gross) 165 hp Pump flow 29.1 gpm Rear lift (at 24"/610mm) 14,586 lb
Puma 220	Power 220 hp Weight Lower 15900 lb Upper 16800 lb Pump flow 30 gpm
Puma 230	Rated Power (gross) 231 hp Weight 19,800 lb Pump flow 35 gpm
Puma 240	Power 240 hp Weight 16,800 lb Pump flow 30 gpm

Buying and ownership: Case IH Farmall 85U to Puma 240

TractorHouse listings for Case IH Farmall 85U — Used-machine listings

Case IH LB 334 PACKER CUTTER and 6 related models

Model	Selected specifications
LB 334 PACKER CUTTER	Tractor PTO Power Required 109.97 hp Outer Tine-To-Tine Width 70.16 in Number Of Tines 56 double (112)
LB 334 ROTTER CUTTER	Tractor PTO Power Required 130.08 hp Outer Tine-To-Tine Width 70.87 in Number Of Tines 56 double (112)
LB 434 ROTTER CUTTER	Tractor PTO Power Required 150.2 hp Outer Tine-To-Tine Width 86.62 in Number Of Tines 68 double (136)
LB 434XL STANDARD	Tractor PTO Power Required 159.59 hp Outer Tine-To-Tine Width 86.62 in Number Of Tines 64 double (128)
LB 4334 STANDARD	Tractor PTO Power Required 124.72 hp Outer Tine-To-Tine Width 80.56 in Number Of Tines 64 double (128)
LB334 STANDARD	Tractor PTO Power Required 104.6 hp Outer Tine-To-Tine Width 70.16 in Number Of Tines 56 double (112)
LLB 434XL ROTTER CUTTER	Tractor PTO Power Required 159.59 hp Outer Tine-To-Tine Width 86.62 in Number Of Tines 64 double (128)

Compare configurations

Baler Pickup
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Number Of Tines	56 double (112)	56 double (112)	68 double (136)	64 double (128)	64 double (128)	56 double (112)	64 double (128)
Outer Tine-To-Tine Width	70.16 in	70.87 in	86.62 in	86.62 in	80.56 in	70.16 in	86.62 in
Pickup Working Width	77.49 in	77.49 in	92.6 in	92.6 in	87.88 in	77.49 in	92.6 in
Tine Spacing	2.6 in	2.6 in	2.6 in	2.6 in	2.6 in	2.6 in	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR	Two 15x6.00-6 4PR	Two 15x6.00-6 4PR	Two 15x6.00-6 4PR, caster opt	Two 15x6.00-6 4PR	Two 15x6.00-6 4PR	Two 15x6.00-6 4PR,caster opt
Number Of Tine Bars	4	4	4	4	4	4	4
Number Of Tine Rows	4	4	4	4	4	4	4

Dimensions and weight
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Tractor PTO Power Required	109.97 hp	130.08 hp	150.2 hp	159.59 hp	124.72 hp	104.6 hp	159.59 hp
Height Tandem Axle	123.35 in	126.89 in	126.89 in	127.29 in	123.35 in	123.35 in	126.89 in
Height, Single Axle	123.35 in	126.89 in	126.89 in	126.89 in	123.35 in	123.35 in	126.89 in
Length With Bale Chute Folded	294.38 in	296.58 in	296.58 in	327.37 in	294.38 in	294.38 in	327.37 in

Knotters
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Knotters Type	Double knot	Double knot	Double knot	Double knot	Double knot	Double knot	Double knot
Number Of Knotters	4	4	6	6	6	4	6
Twine Ball Storage Quantity	32	32	32	32	32	32	32

Maindrive
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch	Shearbolt, overrunning clutch & slip clutch

Sales Literature
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Literature Number	CIH07211201	CIH07211201	CIH07211201	News release	CIH07211201	CIH07211201	News release
Literature Date	July, 2012	July, 2012	July, 2012	September, 2016	July, 2012	July, 2012	September, 2016

Years Of Manufacture
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Manufacturing Status	Current	Current	Current	Current	Current	Current	Current
First Entry Date	August,2012	August,2012	August,2012	September, 2016	August,2012	August,2012	September, 2016

Engine
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
PTO Speed	1,000 rpm	1,000 rpm	1,000 rpm	1,000 rpm	1,000 rpm	1,000 rpm	1,000 rpm
Number Of Remote Hydraulic Valves	3	3	3	3	2	2	3

Bale Size
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Bale Height	35.5 in	35.5 in	35.5 in	35.5 in	35.5 in	35.5 in	35.5 in
Bale Width	31.5 in	31.5 in	47.3 in	47.3 in	47.3 in	31.5 in	47.3 in
Bale Length - Max	108 in	108 in	108 in	118.2 in	108 in	108 in	118.2 in

Feeding
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Feeder Description	3 packer forks, 6 double tines	Rotor, 31.5" (800 mm), "W" tine	Rotor, 47.2" (1200 mm), "W" tine	Rotor width 47.2" (1200); "W" tine	3 packer forks, 9 single tines	2 packer forks, 6 single tines	Rotor, 47.2" (1200 mm), "W" tine
Stuffer Description	Fork, 6 tines	Fork,4 tines	Fork,6 tines	Fork,6 tines	Fork,6 tines	Fork,4 tines	Fork,6 tines

Tires
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Tire Size Single Axle	600/55x22.5 up to 700/40 R22.5	600/55x22.5 up to 700/40 R22.5	700/40 R22.5	WH600/55-22.5 or 700/40-22.5	700/40 R22.5	600/55x22.5 up to 700/40 R22.5	WH600/55-22.5 or 700/40-22.5
Tire Size Tandem Axle	500/50-17 or 550/45 R22.5	550/45 R22.5 up to 620/50 R22.5	550/45 R22.5 up to 620/50 R22.5	WH500/50-17.0 or 550/45 R22.5	550/45 R22.5 up to 620/50 R22.5	500/50-17 or 550/45 R22.5	WH500/50-17.0 or 550/45 R22.5

Weights
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Weight Single Axle	18,519 lb	20,062 lb	20,062 lb	20,283 lb	20,283 lb	17,747 lb	20,062 lb
Weight Tandem Axle	19,842 lb	21,385 lb	21,385 lb	21,605 lb	21,605 lb	19,070 lb	21,385 lb

Plunger
Specification	LB 334 PACKER CUTTER	LB 334 ROTTER CUTTER	LB 434 ROTTER CUTTER	LB 434XL STANDARD	LB 4334 STANDARD	LB334 STANDARD	LLB 434XL ROTTER CUTTER
Density Control	3-way monitor control	3-way monitor control	3-way monitor control	AFS Pro 300 or AFS Pro 700	3-way monitor control	3-way monitor control	AFS Pro 300 or AFS Pro 700
Plunger Speed (Strokes/Min)	48	48	48	48	48	48	48
Plunger Stroke	28 in	28 in	28 in	28 in	28 in	28 in	28 in

LB 334 PACKER CUTTER

Specification	Source figure
Baler Pickup
Number Of Tines	56 double (112)
Outer Tine-To-Tine Width	70.16 in
Pickup Working Width	77.49 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	109.97 hp
Height Tandem Axle	123.35 in
Height, Single Axle	123.35 in
Length With Bale Chute Folded	294.38 in
Baler Width	101.11 in
Knotters
Knotters Type	Double knot
Number Of Knotters	4
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	CIH07211201
Literature Date	July, 2012
Document Number	HF-5138-12
Document Date	July, 2012
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	August,2012
Revision Date	July, 2012
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	3
Bale Size
Bale Height	35.5 in
Bale Width	31.5 in
Bale Length - Max	108 in
Feeding
Feeder Description	3 packer forks, 6 double tines
Stuffer Description	Fork, 6 tines
Tires
Tire Size Single Axle	600/55x22.5 up to 700/40 R22.5
Tire Size Tandem Axle	500/50-17 or 550/45 R22.5
Weights
Weight Single Axle	18,519 lb
Weight Tandem Axle	19,842 lb
Plunger
Density Control	3-way monitor control
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in
Wrapping System
Cutter Knives	6

Source: RitchieSpecs

LB 334 ROTTER CUTTER

Specification	Source figure
Baler Pickup
Number Of Tines	56 double (112)
Outer Tine-To-Tine Width	70.87 in
Pickup Working Width	77.49 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	130.08 hp
Height Tandem Axle	126.89 in
Height, Single Axle	126.89 in
Length With Bale Chute Folded	296.58 in
Baler Width	101.11 in
Knotters
Knotters Type	Double knot
Number Of Knotters	4
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	CIH07211201
Literature Date	July, 2012
Document Number	HF-5138-12
Document Date	July, 2012
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	August,2012
Revision Date	July, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	3
Bale Size
Bale Height	35.5 in
Bale Width	31.5 in
Bale Length - Max	108 in
Feeding
Feeder Description	Rotor, 31.5" (800 mm), "W" tine
Stuffer Description	Fork,4 tines
Tires
Tire Size Single Axle	600/55x22.5 up to 700/40 R22.5
Tire Size Tandem Axle	550/45 R22.5 up to 620/50 R22.5
Weights
Weight Single Axle	20,062 lb
Weight Tandem Axle	21,385 lb
Plunger
Density Control	3-way monitor control
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in
Wrapping System
Cutter Knives	9 or 19 knives, 38 rotor teeth

Source: RitchieSpecs

LB 434 ROTTER CUTTER

Specification	Source figure
Baler Pickup
Number Of Tines	68 double (136)
Outer Tine-To-Tine Width	86.62 in
Pickup Working Width	92.6 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	150.2 hp
Height Tandem Axle	126.89 in
Height, Single Axle	126.89 in
Length With Bale Chute Folded	296.58 in
Baler Width	116.07 in
Knotters
Knotters Type	Double knot
Number Of Knotters	6
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	CIH07211201
Literature Date	July, 2012
Document Number	HF-5138-12
Document Date	July, 2012
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	August,2012
Revision Date	July, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	3
Bale Size
Bale Height	35.5 in
Bale Width	47.3 in
Bale Length - Max	108 in
Feeding
Feeder Description	Rotor, 47.2" (1200 mm), "W" tine
Stuffer Description	Fork,6 tines
Tires
Tire Size Single Axle	700/40 R22.5
Tire Size Tandem Axle	550/45 R22.5 up to 620/50 R22.5
Weights
Weight Single Axle	20,062 lb
Weight Tandem Axle	21,385 lb
Plunger
Density Control	3-way monitor control
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in
Wrapping System
Cutter Knives	15 or 29 knives, 58 rotor teeth

Source: RitchieSpecs

LB 434XL STANDARD

Specification	Source figure
Baler Pickup
Number Of Tines	64 double (128)
Outer Tine-To-Tine Width	86.62 in
Pickup Working Width	92.6 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR, caster opt
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	159.59 hp
Height Tandem Axle	127.29 in
Height, Single Axle	126.89 in
Length With Bale Chute Folded	327.37 in
Baler Width	116.07 in
Baler Width Max	117.49 in
Baler Width Min	109.53 in
Knotters
Knotters Type	Double knot
Number Of Knotters	6
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	News release
Literature Date	September, 2016
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	September, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	3
Bale Size
Bale Height	35.5 in
Bale Width	47.3 in
Bale Length - Max	118.2 in
Feeding
Feeder Description	Rotor width 47.2" (1200); "W" tine
Stuffer Description	Fork,6 tines
Tires
Tire Size Single Axle	WH600/55-22.5 or 700/40-22.5
Tire Size Tandem Axle	WH500/50-17.0 or 550/45 R22.5
Weights
Weight Single Axle	20,283 lb
Weight Tandem Axle	21,605 lb
Plunger
Density Control	AFS Pro 300 or AFS Pro 700
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in
Wrapping System
Cutter Knives	15 or 29, hydraulic activation

Source: RitchieSpecs

LB 4334 STANDARD

Specification	Source figure
Baler Pickup
Number Of Tines	64 double (128)
Outer Tine-To-Tine Width	80.56 in
Pickup Working Width	87.88 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	124.72 hp
Height Tandem Axle	123.35 in
Height, Single Axle	123.35 in
Length With Bale Chute Folded	294.38 in
Baler Width	116.07 in
Knotters
Knotters Type	Double knot
Number Of Knotters	6
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	CIH07211201
Literature Date	July, 2012
Document Number	HF-5138-12
Document Date	July, 2012
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	August,2012
Revision Date	July, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	2
Bale Size
Bale Height	35.5 in
Bale Width	47.3 in
Bale Length - Max	108 in
Feeding
Feeder Description	3 packer forks, 9 single tines
Stuffer Description	Fork,6 tines
Tires
Tire Size Single Axle	700/40 R22.5
Tire Size Tandem Axle	550/45 R22.5 up to 620/50 R22.5
Weights
Weight Single Axle	20,283 lb
Weight Tandem Axle	21,605 lb
Plunger
Density Control	3-way monitor control
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in

Source: RitchieSpecs

LB334 STANDARD

Specification	Source figure
Baler Pickup
Number Of Tines	56 double (112)
Outer Tine-To-Tine Width	70.16 in
Pickup Working Width	77.49 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	104.6 hp
Height Tandem Axle	123.35 in
Height, Single Axle	123.35 in
Length With Bale Chute Folded	294.38 in
Baler Width	101.11 in
Knotters
Knotters Type	Double knot
Number Of Knotters	4
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	CIH07211201
Literature Date	July, 2012
Document Number	HF-5138-12
Document Date	July, 2012
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	August,2012
Revision Date	July, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	2
Bale Size
Bale Height	35.5 in
Bale Width	31.5 in
Bale Length - Max	108 in
Feeding
Feeder Description	2 packer forks, 6 single tines
Stuffer Description	Fork,4 tines
Tires
Tire Size Single Axle	600/55x22.5 up to 700/40 R22.5
Tire Size Tandem Axle	500/50-17 or 550/45 R22.5
Weights
Weight Single Axle	17,747 lb
Weight Tandem Axle	19,070 lb
Plunger
Density Control	3-way monitor control
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in

Source: RitchieSpecs

LLB 434XL ROTTER CUTTER

Specification	Source figure
Baler Pickup
Number Of Tines	64 double (128)
Outer Tine-To-Tine Width	86.62 in
Pickup Working Width	92.6 in
Tine Spacing	2.6 in
Gauge Wheels	Two 15x6.00-6 4PR,caster opt
Number Of Tine Bars	4
Number Of Tine Rows	4
Dimensions and weight
Tractor PTO Power Required	159.59 hp
Height Tandem Axle	126.89 in
Height, Single Axle	126.89 in
Length With Bale Chute Folded	327.37 in
Baler Width Max	117.49 in
Baler Width Min	109.53 in
Knotters
Knotters Type	Double knot
Number Of Knotters	6
Twine Ball Storage Quantity	32
Maindrive
Main Drive Protection	Shearbolt, overrunning clutch & slip clutch
Sales Literature
Literature Number	News release
Literature Date	September, 2016
Years Of Manufacture
Manufacturing Status	Current
First Entry Date	September, 2016
Engine
PTO Speed	1,000 rpm
Number Of Remote Hydraulic Valves	3
Bale Size
Bale Height	35.5 in
Bale Width	47.3 in
Bale Length - Max	118.2 in
Feeding
Feeder Description	Rotor, 47.2" (1200 mm), "W" tine
Stuffer Description	Fork,6 tines
Tires
Tire Size Single Axle	WH600/55-22.5 or 700/40-22.5
Tire Size Tandem Axle	WH500/50-17.0 or 550/45 R22.5
Weights
Weight Single Axle	20,062 lb
Weight Tandem Axle	21,385 lb
Plunger
Density Control	AFS Pro 300 or AFS Pro 700
Plunger Speed (Strokes/Min)	48
Plunger Stroke	28 in
Wrapping System
Cutter Knives	15 or 29 knives,hydraulic activation

Source: RitchieSpecs

Case IH LBX332 Packer Cutter to LBX432 Standard

Model	Selected specifications
LBX332 Packer Cutter	Weight 16,755 lb Tractor PTO Power Required 110 hp Tine To Tine Width 5.75 ft
LBX332 Rotor Cutter	Weight 18,298 lb Tractor PTO Power Required 130 hp Tine To Tine Width 5.75 ft
LBX332 Standard	Weight 15,983 lb Tractor PTO Power Required 102 hp Tine To Tine Width 5.75 ft
LBX432 Rotor Cutter	Weight 20,613 lb Tractor PTO Power Required 150 hp Tine To Tine Width 7.2 ft
LBX432 Standard	Weight 17,857 lb Tractor PTO Power Required 122 hp Tine To Tine Width 6.58 ft

Case IH Magnum 180 to Puma 215

Model	Selected specifications
Magnum 180	Power 180 hp Weight 19,000 lb Rear lift 12,787 lb
Magnum 190	Power 190 hp Weight 19,000 lb Rear lift 12,787 lb
Magnum 210	Power 210 hp Rear lift 12,787 lb Height (cab) 128.5 in
Puma 160	Rated Power (gross) 160 hp Weight 16,360 lb Pump flow 29 gpm
Puma 165	Power 165 hp Weight Lower 15708 lb Upper 17725 lb Pump flow 31.7 gpm (powershift std.)
Puma 170	Rated Power (gross) 167 hp Weight 18,740 lb Pump flow 32 gpm (powershift)
Puma 180	Power 180 hp Weight Lower 15708 lb Upper 17595 lb Pump flow 31.7 gpm*Standard flow with power shift transmission
Puma 185	Rated Power (gross) 185 hp Weight 18,135 lb Pump flow 32 gpm (powershift)
Puma 195	Power 195 hp Weight Lower 15708 lb Upper 17635 lb Pump flow 31.7 gpm (powershift std.)
Puma 200	Rated Power (gross) 200 hp Weight 18,940 lb Pump flow 32 gpm (powershift)
Puma 210	Power 210 hp Weight Lower 15708 lb Upper 17915 lb Pump flow 31.7 gpm (powershift std.)
Puma 215	Rated Power (gross) 215 hp Weight 17,880 lb Pump flow 32 gpm (powershift)

Buying and ownership: Case IH Magnum 180 to Puma 215

TractorHouse listings for Case IH Magnum 180 — Used-machine listings

Case IH Magnum 235 to Steiger 540

Model	Selected specifications
Magnum 235	Rated Power (gross) 235 hp Weight 27,180 lb Rear lift 12,800 lb (3/3N 109cm links)
Magnum 260	Rated Power (gross) 257 hp Weight 27,180 lb Rear lift 12,800 lb (3/3N 109cm links)
Magnum 265	Rated Power (gross) 265 hp Weight 28,600 lb Pump flow 59 gpm
Magnum 290	Rated Power (gross) 284 hp Weight 27,400 lb Rear lift 12,800 lb (3/3N 109cm links)
Magnum 295	Rated Power (gross) 295 hp Weight 28,600 lb Pump flow 59 gpm
Magnum 315	Rated Power (gross) 312 hp Weight 27,800 lb Rear lift 14,375 lb (3/3N 109cm links)
Magnum 325	Rated Power (gross) 325 hp Weight 28,800 lb Pump flow 59 gpm
Magnum 340	Rated Power (gross) 340 hp Weight 28,230 lb Rear lift 17,400 lb (109cm links)
Steiger 350	Power 350 hp Weight 35,848 lb Pump flow 35 gpm
Magnum 370	Rated Power (gross) 367 hp Weight 31,190 lb Pump flow 44 gpm
Magnum 380	Rated Power (gross) 380 hp Weight 32,200 lb Pump flow 44 gpm
Magnum 385	Rated Power (gross) 385 hp Weight 32,200 lb Pump flow 59 gpm
Magnum 400	Rated Power (gross) 391 hp Weight 32,200 lb Pump flow 44 gpm
Magnum 405	Rated Power (gross) 405 hp Weight 32,200 lb Pump flow 59 gpm
Steiger 420	Power 420 hp Weight 40,159 lb Pump flow 42 gpm
Steiger 425	Rated Power (gross) 419.2 hp Weight 40,800 lb Pump flow 42 gpm
Steiger 470	Power 470 hp Weight 40,159 lb Pump flow 42 gpm
Steiger 475	Rated Power (gross) 468.5 hp Weight 40,800 lb Pump flow 42 gpm
Steiger 525	Rated Power (gross) 517.8 hp Weight 40,800 lb Pump flow 42 gpm
Steiger 540	Power 535 hp Weight 43,855 lb Pump flow 42 gpm

Buying and ownership: Case IH Magnum 235 to Steiger 540

TractorHouse listings for Case IH Magnum 235 — Used-machine listings

Case IH Magnum 250 to Steiger 370

Model	Selected specifications
Magnum 250	Rated Power (gross) 252 hp Weight 20,140 lb Pump flow 37.5 gpm (early)
Magnum 280	Rated Power (gross) 279 hp Weight 20,670 lb Pump flow 37.5 gpm
Magnum 310	Rated Power (gross) 309 hp Weight 20,670 lb Pump flow 37.5 gpm (early)
Magnum 355	Rated Power (gross) 355 hp Weight 32,200 lb Pump flow 59 gpm
Steiger 370	Maximum Power 405 hp Weight Lower 38469 lb Upper 38759 lb Pump flow 40 gpm

Buying and ownership: Case IH Magnum 250 to Steiger 370

TractorHouse listings for Case IH Magnum 250 — Used-machine listings

Case IH Maxxum 135 to Steiger 485QT Quadtrac

Model	Selected specifications
Maxxum 135	Rated Power (gross) 135 hp Weight Lower 10825 lb Upper 11375 lb Pump flow 21.1 gpm
Maxxum 140	Rated Power (gross) 139 hp Weight Lower 10912 lb Upper 12180 lb Pump flow 26.5 gpm
Maxxum 145	Rated Power (gross) 145 hp Weight Lower 12004 lb Upper 12555 lb Pump flow 21.1 gpm
Maxxum 150	Rated Power (gross) 145 hp Weight Lower 12280 lb Upper 12831 lb Pump flow 21.1 gpm
Puma 125	Power (gross) 125 hp Weight Lower 13230 lb Upper 13260 lb Pump flow 26.5 gpm
Puma 130	Rated Power (gross) 131 hp Weight 13,600 lb Pump flow 29 gpm
Puma 140	Power (gross) 140 hp Weight Lower 13230 lb Upper 13725 lb Pump flow 26.5 gpm
Puma 140 X	Rated Power (gross) 140 hp Pump flow 29.1 gpm Rear lift (at 24"/610mm) 14,586 lb
Puma 145	Rated Power (gross) 146 hp Weight 14,350 lb Pump flow 29 gpm
Puma 150	Power 150 hp Weight Lower 13900 lb Upper 14500 lb Pump flow 26.5 gpm
Puma 150 X	Rated Power (gross) 150 hp Pump flow 29.1 gpm Rear lift (at 24"/610mm) 14,586 lb
Puma 155	Power (gross) 155 hp Weight Lower 13669 lb Upper 14585 lb Pump flow 26.5 gpm
Steiger 335	Power 335 hp Weight Lower 29760 lb Upper 32120 lb Pump flow 40 gpm
Steiger 370 Rowtrac	Power 370 hp Weight 42,260 lb Pump flow 40 gpm
Steiger 385	Power 385 hp Weight Lower 37900 lb Upper 41605 lb Rear lift (at 24"/610mm) 19,620 lb
Steiger 385QT Quadtrac	Power 385 hp Shipping weight 48,150 lb Rear lift (at 24"/610mm) 19,728 lb
Steiger 435	Power 435 hp Weight Lower 37900 lb Upper 41605 lb Rear lift (at 24"/610mm) 19,620 lb
Steiger 435QT Quadtrac	Power 435 hp Shipping weight 48,150 lb Rear lift (at 24"/610mm) 19,728 lb
Steiger 485	Power 485 hp Weight 38,500 lb Rear lift (at 24"/610mm) 19,620 lb
Steiger 485QT Quadtrac	Power 485 hp Shipping weight 49,000 lb Rear lift (at 24"/610mm) 19,728 lb

Buying and ownership: Case IH Maxxum 135 to Steiger 485QT Quadtrac

TractorByNet: Maxxum 140 reviews
TractorHouse listings for Case IH Maxxum 135 — Used-machine listings

Case IH Optum 270, Optum 300, and Puma 225

Model	Selected specifications
Optum 270	Rated Power (gross) 271 hp Weight 23,149 lb Pump flow 43.6 gpm
Optum 300	Rated Power (gross) 300 hp Weight 23,149 lb Pump flow 43.6 gpm
Puma 225	Power 225 hp Weight 16,500 lb Pump flow 39.6 gpm

Buying and ownership: Case IH Optum 270, Optum 300, and Puma 225

TractorHouse listings for Case IH Optum 270 — Used-machine listings

Case IH Patriot 2250 to Patriot 4440

Model	Selected specifications
Patriot 2250	Rated Power 175 hp Min Boom Width 60 ft Max Boom Width 90 ft
Patriot 3240	Rated Power 250 hp Min Boom Width 60 ft Max Boom Width 100 ft
Patriot 3340	Rated Power 285 hp Min Boom Width 60 ft Max Boom Width 120 ft
Patriot 4440	Rated Power 335 hp Min Boom Width 60 ft Max Boom Width 120 ft

Buying and ownership: Case IH Patriot 2250 to Patriot 4440

TractorHouse listings for Case IH Patriot 2250 — Used-machine listings

Case IH Patriot 3150 to Patriot 4420

Model	Selected specifications
Patriot 3150	Gross Power 152 hp Min Boom Width 75 ft Max Boom Width 90 ft
Patriot 3185	Gross Power 185 hp Min Boom Width 75 ft Max Boom Width 90 ft
Patriot 3320	Gross Power 240 hp Min Boom Width 60 ft Max Boom Width 90 ft
Patriot 4420	Gross Power 310 hp Min Boom Width 60 ft Max Boom Width 90 ft

Case IH RB444 to RB565

Model	Selected specifications
RB444	Baler weight — CIH03281601 brochure reference lb 2950 kg 1338 Minimum PTO power — CIH03281601 brochure hp 40 kW 30 Outer Tine-To-Tine Width, Standard 44.61 in
Case IH RB455	Tractor Power 60-105 hp,45-78 kw Outer Tine-To-Tine Width, Standard 70.87 in Number Of Tine Bars 4
Case IH RB455A	Tractor Power 40.3 hp Weight 3,459 lb Outer Tine-To-Tine Width, Standard 44.61 in
Case IH RB465	Tractor Power 60-105 hp,45-78 kw Outer Tine-To-Tine Width, Standard 70.87 in Number Of Tine Bars 4
RB565	Tractor Power 80.5 hp Outer Tine-To-Tine Width, Standard 59.85 in Number Of Bars 4

Buying and ownership: Case IH RB444 to RB565

TractorHouse listings for Case IH RB455 — Used-machine listings

Case IH SB521 to SB551

Model	Selected specifications
SB521	Tractor PTO Power Required 35 hp Sweep Width Inside 64.97 in Windguard Description 8 rods
Case IH SB531	Tractor PTO Power Required 62 hp Sweep Width Inside 64.97 in Windguard Description 8 rods
Case IH SB541	Tractor PTO Power Required 75 hp Sweep Width Inside 74.81 in Windguard Description 13 rods
Case IH SB541C	Tractor PTO Power Required 75 hp Sweep Width Inside 74.81 in Windguard Description 13 rods
SB551	Tractor PTO Power Required 75 hp Sweep Width Inside 74.81 in Windguard Description 13 rods

Buying and ownership: Case IH SB521 to SB551

NH 5070 Baler Vs Case Ih Sb541 Baler — Owner discussion
TractorHouse listings for Case IH SB521 — Used-machine listings

Case IH SBX520 to SBX550

Model	Selected specifications
SBX520	Weight 3,137 lb Tractor PTO Power Required 35 hp Tine To Tine Width 5.33 ft
Case IH SBX530	Weight 3,393 lb Tractor PTO Power Required 62 hp Tine To Tine Width 5.33 ft
Case IH SBX540	Weight 3,570 lb Tractor PTO Power Required 75 hp Tine To Tine Width 6.25 ft
SBX550	Weight 3,640 lb Tractor PTO Power Required 80 hp Tine To Tine Width 6.25 ft

Buying and ownership: Case IH SBX520 to SBX550

Sbx 520 Caseih Bayler — Owner discussion
TractorHouse listings for Case IH SBX530 — Used-machine listings

Case IH Steiger 400 to Steiger 645 Quadtrac

Model	Selected specifications
Steiger 400	Power 400 hp Weight 36,048 lb Pump flow 35 gpm
Steiger 420 Rowtrac	Power 420 hp Weight 43,510 lb Pump flow 42 gpm
Steiger 450	Power 450 hp Weight 36,048 lb Pump flow 35 gpm
Steiger 450 Quadtrac	Power 450 hp Weight Lower 53554 lb Upper 54290 lb Pump flow 35 gpm
Steiger 470 Quadtrac	Power 470 hp Weight 46,500 lb Pump flow 42 gpm
Steiger 470 Rowtrac	Power 470 hp Weight 43,510 lb Pump flow 42 gpm
Steiger 500	Power 500 hp Weight 39,492 lb Pump flow 35 gpm
Steiger 500 Quadtrac	Power 500 hp Weight Lower 53554 lb Upper 54290 lb Pump flow 35 gpm
Steiger 500 Rowtrac	Power 500 hp Weight 43,510 lb Pump flow 42 gpm
Steiger 535	Power 535 hp Weight 42,639 lb Rear lift (at 24"/610mm) 19,620 lb
Steiger 535QT Quadtrac	Power 535 hp Weight Lower 51000 lb Upper 52410 lb Rear lift (at 24"/610mm) 19,728 lb
Steiger 540 Quadtrac	Power 535 hp Weight 47,780 lb Pump flow 42 gpm
Steiger 550	Power 550 hp Weight 44,046 lb Pump flow 35 gpm
Steiger 600	Power 600 hp Weight 45,868 lb Pump flow 35 gpm
Steiger 600 Quadtrac	Power 600 hp Weight 53,804 lb Rear lift 19,728 lb
Steiger 620	Power 620 hp Weight 48,147 lb Pump flow 42 gpm
Steiger 620 Quadtrac	Power 620 hp Weight Lower 48780 lb Upper 60145 lb Pump flow 42 gpm
Steiger 645	Rated Power (gross) 636.2 hp Weight 50,328 lb Pump flow 42 gpm
Steiger 645 Quadtrac	Rated Power (gross) 636.2 hp Weight 56,800 lb Pump flow 42 gpm

Buying and ownership: Case IH Steiger 400 to Steiger 645 Quadtrac

TractorHouse listings for Case IH Steiger 400 — Used-machine listings

Case IH Steiger 425 Rowtrac to Steiger 785 Quadtrac specification

Model	Selected specifications
Steiger 425 Rowtrac	Rated Power (gross) 419.2 hp Weight 52,200 lb Pump flow 42 gpm
Steiger 475 Quadtrac	Rated Power (gross) 468.5 hp Weight 53,700 lb Pump flow 42 gpm
Steiger 475 Rowtrac	Rated Power (gross) 468.5 hp Weight 52,200 lb Pump flow 42 gpm
Steiger 525 Quadtrac	Rated Power (gross) 517.8 hp Weight 53,700 lb Pump flow 42 gpm
Steiger 525 Rowtrac	Rated Power (gross) 517.8 hp Weight 52,200 lb Pump flow 42 gpm
Steiger 550 Quadtrac	Power 550 hp Weight 53,804 lb Pump flow 35 gpm
Steiger 555	Rated Power (gross) 547.4 hp Weight 46,340 lb Pump flow 42 gpm
Steiger 555 Quadtrac	Rated Power (gross) 547.4 hp Weight 56,800 lb Pump flow 42 gpm
Steiger 580	Power 580 hp Weight 48,147 lb Pump flow 42 gpm
Steiger 580 Quadtrac	Power 580 hp Weight 48,780 lb Pump flow 42 gpm
Steiger 595	Rated Power (gross) 586.9 hp Weight 50,328 lb Pump flow 42 gpm
Steiger 595 Quadtrac	Rated Power (gross) 586.9 hp Weight 56,800 lb Pump flow 42 gpm
Steiger 715 Quadtrac	Rated Power (gross) 705.2 hp Weight 61,200 lb Pump flow 57 gpm
Steiger 785 Quadtrac	Rated Power (gross) 785 hp Weight 61,200 lb Pump flow 57 gpm

Buying and ownership: Case IH Steiger 425 Rowtrac to Steiger 785 Quadtrac specification

TractorHouse listings for Case IH Steiger 425 Rowtrac — Used-machine listings

Case IH TITAN 3040 to TITAN 4540

Model	Selected specifications
TITAN 3040	Rated Power 340.7 hp Weight 22,900 lb Overall Length 338.19 in
TITAN 3540	Rated Power 410.4 hp Weight 24,000 lb Overall Length 338.19 in
TITAN 4040	Rated Power 340.7 hp Weight 21,929 lb Overall Length 303.15 in
TITAN 4540	Rated Power 410.4 hp Weight 22,939 lb Overall Length 303.15 in

Buying and ownership: Case IH TITAN 3040 to TITAN 4540

TractorHouse listings for Case IH TITAN 3040 — Used-machine listings

Case IH WD 1203 SERIES II and 11 related models

Model	Selected specifications
WD 1203 SERIES II	Maximum Horsepower 126 hp Length W/O Header 16.59 ft Wheelbase 134.61 in
Case IH WD 1204 Tier 3 CANADA	Maximum Horsepower 126 hp Length W/O Header 16.86 ft Wheelbase 144.06 in
Case IH WD 1504	Maximum Horsepower 161 hp Length W/O Header 16.86 ft Wheelbase 140.52 in
WD 1903 Series II	Maximum Horsepower 199 hp Length W/O Header 16.59 ft Wheelbase 137.21 in
Case IH WD1203	Maximum Horsepower 126 hp Operating Weight W/O Attachment 10,950 lb Length W/O Header 16.59 ft
Case IH WD 1903	Maximum Horsepower 190 hp Length W/O Header 16.59 ft Wheelbase 137.56 in
Case IH WD 1904 TIER 3 CANADA	Maximum Horsepower 199 hp Length W/O Header 16.61 ft Wheelbase 144.06 in
Case IH WD 2304 TIER 3 CANADA	Maximum Horsepower 240 hp Length W/O Header 16.59 ft Wheelbase 137.21 in
Case IH WD 2104	Maximum Horsepower 220 hp Length W/O Header 16.59 ft Wheelbase 144.06 in
Case IH WD 2504	Maximum Horsepower 261 hp Length W/O Header 16.59 ft Wheelbase 144.06 in
Case IH WD2303	Power 225 hp Operating Weight W/O Attachment 12,300 lb Length W/O Header 16.59 ft
Case IH WDX 2302	Power 225 hp Operating Weight W/O Attachment 12,302 lb Length W/O Header 16.59 ft

Questions

Case IH models: every question this site answers

198 case ih models questions, each linked to the page that answers it.

Short answer

Case IH models: 198 questions on 37 pages, covering Case IH models with their figures taken from a named source page, one model or a few matched models per page. Case IH specifications: 12; Case IH 7230 to Axial-Flow 8010 specifications: 6; Case IH AXIAL-FLOW 5140 to AXIAL-FLOW 9240 specifications: 6. The list below links each one to the page that answers it.

Case IH models holds 198 questions across 37 pages, covering Case IH models with their figures taken from a named source page, one model or a few matched models per page. The most questions sit on Case IH specifications (12), then Case IH 7230 to Axial-Flow 8010 specifications (6).

Figure 1198 case ih models questions across 37 page(s) on this site.

Elsewhere in the question index

Recorded question counts by model page
Page	Recorded quantity
Case IH 7230 to Axial-Flow 8010 specifications	6 questions
Case IH Axial-Flow 2577 and Axial-Flow 2588 specifications	5 questions
Case IH AXIAL-FLOW 5140 to AXIAL-FLOW 9240 specifications	6 questions
Case IH Farmall 110A to Vestrum 130 specifications	6 questions
Case IH Farmall 110M to Luxxum 120 specifications	5 questions
Case IH Farmall 115A, Farmall 120C, and Farmall 140A specificatio	4 questions
Case IH Farmall 120CL and Farmall 130A specifications	4 questions
Case IH Farmall 25A to Farmall 35C specifications	5 questions
Case IH Farmall 31 to Farmall 50C specifications	6 questions
Case IH Farmall 45A, Farmall 50, and Farmall 50B specifications	6 questions
Case IH Farmall 45C CVT to Farmall 55C Series II specifications	5 questions
Case IH Farmall 50A to Farmall 80 specifications	6 questions
Case IH Farmall 55A to Farmall 75N specifications	6 questions
Case IH Farmall 75C to Farmall 110CL specifications	5 questions
Case IH Farmall 85C to Farmall 115U specifications	6 questions
Case IH Farmall 85U to Maxxum 110 specifications	5 questions
Case IH LB 334 PACKER CUTTER and 6 related models specifications	5 questions
Case IH LBX332 Packer Cutter to LBX432 Standard specifications	5 questions
Case IH Magnum 180 to Puma 215 specifications	5 questions
Case IH Magnum 200 to Puma 240 specifications	5 questions
Case IH Magnum 215 to Magnum 335 specifications	5 questions
Case IH Magnum 235 to Steiger 350 specifications	5 questions
Case IH Magnum 250 to Steiger 370 specifications	5 questions
Case IH Magnum 370 to Steiger 540 specifications	5 questions
Case IH Maxxum 135 to Puma 155 specifications	6 questions
Case IH Optum 270, Optum 300, and Puma 225 specifications	5 questions
Case IH Patriot 2250 to Patriot 4440 specifications	5 questions
Case IH Patriot 3150 to Patriot 4420 specifications	5 questions
Case IH RB444 to RB565 specifications	5 questions
Case IH SB521 to SB551 specifications	6 questions
Case IH SBX520 to SBX550 specifications	5 questions
Case IH specifications	12 questions
Case IH Steiger 335 to Steiger 485QT Quadtrac specifications	5 questions
Case IH Steiger 400 to Steiger 645 Quadtrac specifications	4 questions
Case IH Steiger 425 Rowtrac to Steiger 785 Quadtrac specification	4 questions
Case IH TITAN 3040 to TITAN 4540 specifications	5 questions
Case IH WD 1203 SERIES II and 11 related models specifications	5 questions