Machine models

Cat PM201 and 9 related models specifications

Entries in this reference
Listing-entry count
10

Short answer

Cat PM201 and 9 related models: cold planers.

Selected configuration figures
Configuration	Documented field and quantity
PM465	Gross Power 500 hp Operating Weight - Full Load 57,960 lb
PM565B	Gross Power 625 hp Operating Weight - Full Load 83,776 lb
PM201	Gross Power 650 hp Operating Weight - Full Load 86,360 lb
PM312	Rated Power 343 hp Operating Weight 47,407 lb
PM313	Rated Power 343 hp Operating Weight 47,522 lb
PM620	Gross Power 636 hp Operating Weight 69,575 lb
PM622	Gross Power 636 hp Operating Weight 70,626 lb
PM820	Gross Power 806 hp Operating Weight 75,152 lb
PM822	Gross Power 806 hp Operating Weight 76,202 lb
PM825	Gross Power 806 hp Operating Weight 77,548 lb

PM201 and 9 related models specification matrix — Listing labels reported by the source
Publisher name	Source guide	Listing-entry count	Labels named by the source
Cat	PM201 and 9 related models	10	PM465, PM565B, PM201, PM312, PM313, PM620, and 4 more

Conveyor System
Specification	PM465	PM565B	PM201
Discharge Conveyor Width	30 in	30 in	36 in

Specification	PM201
Collecting Conveyor Width	40 in
Discharge Conveyor Length	27.25 ft
Discharge Conveyor Swing - From Center	45 degrees
Discharge Conveyor Swing (R/L)	45 degrees

Dimensions and weight
Specification	PM465	PM565B	PM201
Operating Length	42.98 ft	47.58 ft	49.55 ft
Shipping Width	8.21 ft	10.34 ft	8.42 ft
Max Operating Height	15.1 ft	15.87 ft	16.54 ft

Specification	PM201
Shipping Height	10.57 ft
Shipping Length	27.07 ft
Max Truck Clearance	15.59 ft
Minimum Operating Height	10.58 ft
Shipping Length - Base Machine	27 ft
Shipping Length - With Conveyor Down	51.5 ft
Shipping Maximum Height	9.75 ft
Maximum Operating Height	16.5 ft

Specification	PM201	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Operating Length - Conveyor Up	49.42 ft	36.45 ft	36.45 ft	47.64 ft	47.64 ft	47.64 ft	47.64 ft	47.64 ft
Operating Width	9.17 ft	8.33 ft	8.33 ft	10.2 ft	10.2 ft	10.2 ft	10.2 ft	11.02 ft
Maximum Truck Clearance	15.58 ft	15.42 ft	15.42 ft	15.94 ft	15.94 ft	15.94 ft	15.94 ft	15.94 ft

Specification	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Height - Canopy	12.3 ft	12.3 ft	13.29 ft	13.29 ft	13.29 ft	13.29 ft	13.29 ft
Conveyor Swing	±60 degrees from center	±60 degrees from center	±60 degrees from center	±60 degrees from center	±60 degrees from center	±60 degrees from center	±60 degrees from center
Transport Length	30.58 ft	30.58 ft	40.78 ft	40.78 ft	40.78 ft	40.78 ft	40.78 ft
Transport Width	8.33 lb/in	8.33 lb/in	8.14 ft	8.89 ft	8.27 ft	8.99 ft	9.88 ft
Transport Height	9.84 ft	9.84 ft	9.84 ft	9.84 ft	9.84 ft	9.84 ft	9.84 ft

Specification	PM312	PM313
Minimum Right Cutting Radius	6.3 ft	6.3 ft
Minimum Left Cutting Radius	13.58 ft	13.58 ft

Engine
Specification	PM465	PM565B
Number Of Cylinders	6	8

Specification	PM465	PM565B	PM201
Engine Model	3406CTA	3408ETA	C18 ACERT
Gross Power	500 hp	625 hp	650 hp
Power Measured @	2,100 rpm	2,100 rpm	2,100 rpm
Displacement	891 cu in	1,099 cu in	1,105 cu in

Specification	PM201
Net Power	625 hp

Operational
Specification	PM465	PM565B	PM201
Operating Weight - Full Load	57,960 lb	83,776 lb	86,360 lb
Fuel Capacity	210.3 gal	250 gal	250 gal
Water Spray System Fluid Capacity	601 gal	1,001 gal	1,000 gal
Operating Speed	121.4 ft/min	131.3 ft/min	132 ft/min
Travel Speed	3.3 mph	3.8 mph	3.7 mph

Specification	PM201
Shipping Weight - Empty	76,950 lb
Hydraulic System Fluid Capacity	180 gal
Engine Oil Capacity	17 gal
Cooling System Fluid Capacity	21 gal
Operational Voltage	24 V

Rotary Cutter
Specification	PM465	PM565B	PM201
Cutting Width	6.6 ft	6.9 ft	6.9 ft
Cutting Depth	12.1 in	12.1 in	12.1 in
Number Of Tools	144	117	190

Specification	PM201
Cutter Diameter	46 in

Tracks
Specification	PM465	PM565B	PM201
Number Of Track Units	2	2	4
Front Track Length	4.1 ft	6.8 ft	6.8 ft
Front Track Width	9.9 in	13.8 in	13.8 in
Rear Track Length	4.1 ft	6.8 ft	6.8 ft
Rear Track Width	9.9 in	13.8 in	13.8 in

Weights
Specification	PM201
Operating Weight - With Full Water Tank	86,360 lb
Shipping Weight - With Empty Water Tank	76,950 lb
Operating Weight - With Full Water Tank On Front Tracks	47,500 lb
Operating Weight - With Full Water Tank On Rear Tracks	38,860 lb
Shipping Weight - With Empty Water Tank On Front Tracks	41,550 lb
Shipping Weight - With Empty Water Tank On Rear Tracks	35,400 lb

Specification	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Operating Weight	47,407 lb	47,522 lb	69,575 lb	70,626 lb	75,152 lb	76,202 lb	77,548 lb
Transport Weight	46,506 lb	46,622 lb	66,865 lb	67,916 lb	72,442 lb	73,493 lb	74,838 lb

Operating Specifications
Specification	PM201
Maximum Travel Speed	3.7 mph
Inside Turn Radius	15.4 ft

Service Refill Capacities
Specification	PM201
Fuel Tank Capacity	250 gal
Water Spray System	1,000 gal

Specification	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Cooling System	16.9 gal (US)	16.9 gal (US)	22.5 gal (US)	22.5 gal (US)	27.5 gal (US)	27.5 gal (US)	27.5 gal (US)
Water Spray System Tank	332.9 gal (US)	332.9 gal (US)	898.2 gal (US)	898.2 gal (US)	898.2 gal (US)	898.2 gal (US)	898.2 gal (US)
Fuel Tank	137.9 gal (US)	137.9 gal (US)	292.7 gal (US)	292.7 gal (US)	292.7 gal (US)	292.7 gal (US)	292.7 gal (US)
Hydraulic Tank	14.5 gal (US)	14.5 gal (US)	29.9 gal (US)	29.9 gal (US)	29.9 gal (US)	29.9 gal (US)	29.9 gal (US)
Engine Oil	7.9 gal (US)	7.9 gal (US)	17.2 gal (US)	17.2 gal (US)	17.2 gal (US)	17.2 gal (US)	17.2 gal (US)

Specification	PM312	PM313	PM620	PM622
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)	12.4 gal (US)	12.4 gal (US)	12.4 gal (US)

Rotor Assembly
Specification	PM201
Maximum Cutting Depth	12 in
Number Of Cutting Tools	190

Cutting System
Specification	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Milling Width	48.2 in	51.2 in	79.1 in	88 in	79.1 in	88 in	98.6 in
Maximum Milling Depth	13 in	13 in	13 in	13 in	13 in	13 in	13 in
Rotor Speeds	97 / 109	97 / 109	100 / 109	100 / 109	100 / 109	100 / 109	100 / 109
Number of Bits	106	111	170	185	170	185	203

Specification	PM620	PM622	PM820	PM822	PM825
Minimum Left Cutting Radius	6.56 ft	6.56 ft	6.56 ft	6.56 ft	6.56 ft
Minimum Right Cutting Radius	6.56 ft	5.91 ft	6.56 ft	5.91 ft	4.92 ft

Power Train
Specification	PM312	PM313
Rated Power	343 hp	343 hp

Specification	PM312	PM313	PM620	PM622	PM820	PM822	PM825
Engine	C9.3B	C9.3B	Cat C18	Cat C18	Cat C18 twin-turbo	Cat C18 twin-turbo	Cat C18 twin-turbo
Maximum Travel Speed	3.4 mph	3.4 mph	3.7 mph	3.7 mph	3.7 mph	3.7 mph	3.7 mph
Maximum Milling Speed	108 ft/min	108 ft/min	328 ft/min	328 ft/min	328 ft/min	328 ft/min	328 ft/min

Specification	PM620	PM622	PM820	PM822	PM825
Gross Power	636 hp	636 hp	806 hp	806 hp	806 hp
Engine Power	629 hp	629 hp	798 hp	798 hp	798 hp
Emissions	US EPA Tier 4 Final, EU Stage V, Korea Stage V	US EPA Tier 4 Final, EU Stage V, Korea Stage V	US EPA Tier 4 Final, EU Stage V	US EPA Tier 4 Final, EU Stage V	US EPA Tier 4 Final, EU Stage V
Build Number	02C	02C	02C	02C	02C

Sustainability
Specification	PM620	PM622	PM820	PM822	PM825
Recyclability	95%	95%	96%	96%	96%

Variants — Source comparison annotation
Source guide	Differing-field count reported
PM201 and 9 related models	87

Ratios
Figure	PM465	PM565B	PM201	PM620	PM622	PM820	PM822	PM825
Engine horsepower per 1,000 lb of weight	8.6	7.5	7.2	9.1	9.0	10.7	10.6	10.4
Fuel tank per engine horsepower	0.42 gal	0.40 gal	0.40 gal	0.46 gal	0.46 gal	0.36 gal	0.36 gal	0.36 gal

Cat PM201 and 9 related models: cold planer

History and service record of PM201 and 9 related models

PM-200 launch. Caterpillar announced the PM-200 cold planer in 2010 as the replacement for the Bitelli SF 200RS, sharing many features with the recently released PM-201, including the electronically controlled Cat C18 ACERT engine (429 kW, 575 hp gross in the PM-200) meeting Tier 3 and Stage IIIa. Caterpillar introduces the new PM-200 cold planer, Total Landscape Care.
PM200 and PM201. LECTURA Specs lists the Cat PM200 as built 2008 to 2017 with a C18 at 575 hp; the PM201 uses a C18 at 650 hp and has three rotor options. Caterpillar PM200 (2008-2017), LECTURA Specs; Caterpillar PM-200 cold planers for sale, PavingEquipment.com.
Parts. Warren Cat publishes a cold planer parts reference guide covering the PM series. Cold planer parts reference guide, Warren Cat.

PM201 and 9 related models: dated market and recall observations — Dated listing search
Date	Listing index	Equipment class	Names queried	Result
2026-09-24	MachineryTrader (machinerytrader.com)	cold planer	PM465, PM565B, PM201	No matching offers in this snapshot

Dated CPSC search
Date	Database	Names queried	Result
2026-09-24	U.S. Consumer Product Safety Commission	Cat; PM465, PM565B, PM201	No matching recall in the stated search

Sources for this page
Evidence class	Document, classification and recorded date
Reference site	Reference site: Cat PM465 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM565B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM201 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM312 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM313 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM620 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM622 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM820 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM822 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Cat PM825 — RitchieSpecs. Observed 2026-09-24.
Published history	Published history Source: Caterpillar introduces the new PM-200 cold planer, Total Landscape Care — Totallandscapecare. Observed 2026-09-25.
Published history	Published history Source: Caterpillar PM200 (2008-2017), LECTURA Specs — LECTURA Specs. Observed 2026-09-25.
Published history	Published history Source: Caterpillar PM-200 cold planers for sale, PavingEquipment.com — Pavingequipment. Observed 2026-09-25.
Published history	Published history Source: Cold planer parts reference guide, Warren Cat — Warrencat. Observed 2026-09-25.
Federal agency data	Federal agency data: Recall database search for Cat — U.S. Consumer Product Safety Commission. Observed 2026-09-24.

Recorded observations — Classification in the linked listing
Guide	As-listed machine class
Cat PM201 and 9 related models	cold planer

Cat PM201 and 9 related models: Configuration records

PM465

Specification	Source figure
Dimensions and weight
Operating Length	42.98 ft
Shipping Width	8.21 ft
Max Operating Height	15.1 ft
Engine
Engine Model	3406CTA
Gross Power	500 hp
Power Measured @	2,100 rpm
Displacement	891 cu in
Operational
Operating Weight - Full Load	57,960 lb
Fuel Capacity	210.3 gal
Water Spray System Fluid Capacity	601 gal
Operating Speed	121.4 ft/min
Travel Speed	3.3 mph
Rotary Cutter
Cutting Width	6.6 ft
Cutting Depth	12.1 in
Number Of Tools	144
Additional specifications
Discharge Conveyor Width	30 in
Number Of Cylinders	6
Number Of Track Units	2
Front Track Length	4.1 ft
Front Track Width	9.9 in
Rear Track Length	4.1 ft
Rear Track Width	9.9 in

Source

PM565B

Specification	Source figure
Dimensions and weight
Operating Length	47.58 ft
Shipping Width	10.34 ft
Max Operating Height	15.87 ft
Engine
Engine Model	3408ETA
Gross Power	625 hp
Power Measured @	2,100 rpm
Displacement	1,099 cu in
Operational
Operating Weight - Full Load	83,776 lb
Fuel Capacity	250 gal
Water Spray System Fluid Capacity	1,001 gal
Operating Speed	131.3 ft/min
Travel Speed	3.8 mph
Rotary Cutter
Cutting Width	6.9 ft
Cutting Depth	12.1 in
Number Of Tools	117
Additional specifications
Discharge Conveyor Width	30 in
Number Of Cylinders	8
Number Of Track Units	2
Front Track Length	6.8 ft
Front Track Width	13.8 in
Rear Track Length	6.8 ft
Rear Track Width	13.8 in

Source

PM201

Specification	Source figure
Conveyor System
Collecting Conveyor Width	40 in
Discharge Conveyor Swing (R/L)	45 degrees
Dimensions and weight
Operating Length	49.55 ft
Shipping Width	8.42 ft
Shipping Height	10.57 ft
Shipping Length	27.07 ft
Max Truck Clearance	15.59 ft
Max Operating Height	16.54 ft
Engine
Engine Model	C18 ACERT
Gross Power	650 hp
Net Power	625 hp
Power Measured @	2,100 rpm
Displacement	1,105 cu in
Operational
Operating Weight - Full Load	86,360 lb
Shipping Weight - Empty	76,950 lb
Fuel Capacity	250 gal
Hydraulic System Fluid Capacity	180 gal
Water Spray System Fluid Capacity	1,000 gal
Engine Oil Capacity	17 gal
Cooling System Fluid Capacity	21 gal
Operational Voltage	24 V
Operating Speed	132 ft/min
Travel Speed	3.7 mph
Rotary Cutter
Cutting Width	6.9 ft
Cutting Depth	12.1 in
Number Of Tools	190
Additional specifications
Discharge Conveyor Width	36 in
Discharge Conveyor Length	27.25 ft
Discharge Conveyor Swing - From Center	45 degrees
Operating Length - Conveyor Up	49.42 ft
Operating Width	9.17 ft
Minimum Operating Height	10.58 ft
Maximum Truck Clearance	15.58 ft
Shipping Length - Base Machine	27 ft
Shipping Length - With Conveyor Down	51.5 ft
Shipping Maximum Height	9.75 ft
Maximum Operating Height	16.5 ft
Cutter Diameter	46 in
Number Of Track Units	4
Front Track Length	6.8 ft
Front Track Width	13.8 in
Rear Track Length	6.8 ft
Rear Track Width	13.8 in
Operating Weight - With Full Water Tank	86,360 lb
Shipping Weight - With Empty Water Tank	76,950 lb
Operating Weight - With Full Water Tank On Front Tracks	47,500 lb
Operating Weight - With Full Water Tank On Rear Tracks	38,860 lb
Shipping Weight - With Empty Water Tank On Front Tracks	41,550 lb
Shipping Weight - With Empty Water Tank On Rear Tracks	35,400 lb
Maximum Travel Speed	3.7 mph
Inside Turn Radius	15.4 ft
Fuel Tank Capacity	250 gal
Water Spray System	1,000 gal
Maximum Cutting Depth	12 in
Number Of Cutting Tools	190

Source

PM312

Specification	Source figure
Dimensions and weight
Engine	C9.3B
Additional specifications
Operating Length - Conveyor Up	36.45 ft
Operating Width	8.33 ft
Maximum Truck Clearance	15.42 ft
Height - Canopy	12.3 ft
Minimum Right Cutting Radius	6.3 ft
Minimum Left Cutting Radius	13.58 ft
Conveyor Swing	±60 degrees from center
Transport Length	30.58 ft
Transport Width	8.33 lb/in
Transport Height	9.84 ft
Operating Weight	47,407 lb
Transport Weight	46,506 lb
Cooling System	16.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)
Water Spray System Tank	332.9 gal (US)
Fuel Tank	137.9 gal (US)
Hydraulic Tank	14.5 gal (US)
Engine Oil	7.9 gal (US)
Milling Width	48.2 in
Maximum Milling Depth	13 in
Rotor Speeds	97 / 109
Number of Bits	106
Rated Power	343 hp
Maximum Travel Speed	3.4 mph
Maximum Milling Speed	108 ft/min

Source

PM313

Specification	Source figure
Dimensions and weight
Engine	C9.3B
Additional specifications
Operating Length - Conveyor Up	36.45 ft
Operating Width	8.33 ft
Maximum Truck Clearance	15.42 ft
Height - Canopy	12.3 ft
Minimum Right Cutting Radius	6.3 ft
Minimum Left Cutting Radius	13.58 ft
Conveyor Swing	±60 degrees from center
Transport Length	30.58 ft
Transport Width	8.33 lb/in
Transport Height	9.84 ft
Operating Weight	47,522 lb
Transport Weight	46,622 lb
Cooling System	16.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)
Water Spray System Tank	332.9 gal (US)
Fuel Tank	137.9 gal (US)
Hydraulic Tank	14.5 gal (US)
Engine Oil	7.9 gal (US)
Milling Width	51.2 in
Maximum Milling Depth	13 in
Rotor Speeds	97 / 109
Number of Bits	111
Rated Power	343 hp
Maximum Travel Speed	3.4 mph
Maximum Milling Speed	108 ft/min

Source

PM620

Specification	Source figure
Dimensions and weight
Engine	Cat C18
Engine
Gross Power	636 hp
Additional specifications
Operating Length - Conveyor Up	47.64 ft
Operating Width	10.2 ft
Maximum Truck Clearance	15.94 ft
Height - Canopy	13.29 ft
Conveyor Swing	±60 degrees from center
Transport Length	40.78 ft
Transport Width	8.14 ft
Transport Height	9.84 ft
Operating Weight	69,575 lb
Transport Weight	66,865 lb
Cooling System	22.5 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)
Water Spray System Tank	898.2 gal (US)
Fuel Tank	292.7 gal (US)
Hydraulic Tank	29.9 gal (US)
Engine Oil	17.2 gal (US)
Milling Width	79.1 in
Maximum Milling Depth	13 in
Rotor Speeds	100 / 109
Number of Bits	170
Minimum Left Cutting Radius	6.56 ft
Minimum Right Cutting Radius	6.56 ft
Maximum Travel Speed	3.7 mph
Maximum Milling Speed	328 ft/min
Engine Power	629 hp
Emissions	US EPA Tier 4 Final, EU Stage V, Korea Stage V
Build Number	02C
Recyclability	95%

Source

PM622

Specification	Source figure
Dimensions and weight
Engine	Cat C18
Engine
Gross Power	636 hp
Additional specifications
Operating Length - Conveyor Up	47.64 ft
Operating Width	10.2 ft
Maximum Truck Clearance	15.94 ft
Height - Canopy	13.29 ft
Conveyor Swing	±60 degrees from center
Transport Length	40.78 ft
Transport Width	8.89 ft
Transport Height	9.84 ft
Operating Weight	70,626 lb
Transport Weight	67,916 lb
Cooling System	22.5 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)
Water Spray System Tank	898.2 gal (US)
Fuel Tank	292.7 gal (US)
Hydraulic Tank	29.9 gal (US)
Engine Oil	17.2 gal (US)
Milling Width	88 in
Maximum Milling Depth	13 in
Rotor Speeds	100 / 109
Number of Bits	185
Minimum Left Cutting Radius	6.56 ft
Minimum Right Cutting Radius	5.91 ft
Maximum Travel Speed	3.7 mph
Maximum Milling Speed	328 ft/min
Engine Power	629 hp
Emissions	US EPA Tier 4 Final, EU Stage V, Korea Stage V
Build Number	02C
Recyclability	95%

Source

PM820

Specification	Source figure
Specifications
Milling Width	79.1 in
Number of Bits	170
Maximum Milling Depth	13 in
Rotor Speeds	100 / 109
Minimum Left Cutting Radius	6.56 ft
Minimum Right Cutting Radius	6.56 ft
Gross Power	806 hp
Engine Power	798 hp
Engine	Cat C18 twin-turbo
Emissions	US EPA Tier 4 Final, EU Stage V
Maximum Milling Speed	328 ft/min
Maximum Travel Speed	3.7 mph
Build Number	02C
Operating Weight	75,152 lb
Transport Weight	72,442 lb
Operating Length - Conveyor Up	47.64 ft
Operating Width	10.2 ft
Height - Canopy	13.29 ft
Maximum Truck Clearance	15.94 ft
Conveyor Swing	±60 degrees from center
Transport Length	40.78 ft
Transport Width	8.27 ft
Transport Height	9.84 ft
Fuel Tank	292.7 gal (US)
Cooling System	27.5 gal (US)
Engine Oil	17.2 gal (US)
Hydraulic Tank	29.9 gal (US)
Water Spray System Tank	898.2 gal (US)
Recyclability	96%

Source

PM822

Specification	Source figure
Specifications
Milling Width	88 in
Number of Bits	185
Maximum Milling Depth	13 in
Rotor Speeds	100 / 109
Minimum Left Cutting Radius	6.56 ft
Minimum Right Cutting Radius	5.91 ft
Gross Power	806 hp
Engine Power	798 hp
Engine	Cat C18 twin-turbo
Emissions	US EPA Tier 4 Final, EU Stage V
Maximum Milling Speed	328 ft/min
Maximum Travel Speed	3.7 mph
Build Number	02C
Operating Weight	76,202 lb
Transport Weight	73,493 lb
Operating Length - Conveyor Up	47.64 ft
Operating Width	10.2 ft
Height - Canopy	13.29 ft
Maximum Truck Clearance	15.94 ft
Conveyor Swing	±60 degrees from center
Transport Length	40.78 ft
Transport Width	8.99 ft
Transport Height	9.84 ft
Fuel Tank	292.7 gal (US)
Cooling System	27.5 gal (US)
Engine Oil	17.2 gal (US)
Hydraulic Tank	29.9 gal (US)
Water Spray System Tank	898.2 gal (US)
Recyclability	96%

Source

PM825

Specification	Source figure
Specifications
Milling Width	98.6 in
Number of Bits	203
Maximum Milling Depth	13 in
Rotor Speeds	100 / 109
Minimum Left Cutting Radius	6.56 ft
Minimum Right Cutting Radius	4.92 ft
Gross Power	806 hp
Engine Power	798 hp
Engine	Cat C18 twin-turbo
Emissions	US EPA Tier 4 Final, EU Stage V
Maximum Milling Speed	328 ft/min
Maximum Travel Speed	3.7 mph
Build Number	02C
Operating Weight	77,548 lb
Transport Weight	74,838 lb
Operating Length - Conveyor Up	47.64 ft
Operating Width	11.02 ft
Height - Canopy	13.29 ft
Maximum Truck Clearance	15.94 ft
Conveyor Swing	±60 degrees from center
Transport Length	40.78 ft
Transport Width	9.88 ft
Transport Height	9.84 ft
Fuel Tank	292.7 gal (US)
Cooling System	27.5 gal (US)
Engine Oil	17.2 gal (US)
Hydraulic Tank	29.9 gal (US)
Water Spray System Tank	898.2 gal (US)
Recyclability	96%

Source

Cat PM201 and 9 related models specifications

Cat PM201 and 9 related models: cold planer

History and service record of PM201 and 9 related models

Sources for this page

Cat PM201 and 9 related models: Configuration records