Machine models

Krupp KMK11000: assembly, chart and driveline

The carrier, boom transporter and heavy-lift chart

The KMK11000 carrier combines a six-axle tractor, bolted pedestal and four-axle rear section. Its separate boom transporter has nine axles and its own lifting-and-sliding assembly equipment. The transporter's engine specification does not identify the carrier engine.

Krupp's drawing gives different width and length envelopes for the two vehicles. A route survey needs both. Its reduced outrigger setting also requires the matching operating instructions.

The two 51 m load-chart columns use different telescope sections. Equal boom length does not identify the same chart. Capacities include the hook block and auxiliary equipment; the headline maximum additionally needs the listed heavy-duty arrangement.

Use the machine's approved chart for its actual assembly.

Source: Krupp KMK11000 original specifications, pages 3, 5 and 7.

Identify the CLBT 6061 installation before ordering parts

The Allison designation matters when inspecting this crane’s driveline. Allison’s original CL(B)T 5000–6000 publication separates straight-through transmissions from transfer-gear models; the transfer gearing belongs to the 5000 series. It also distinguishes remote mounting from direct engine mounting.

A family designation alone cannot identify the installed flanges, mounting supports or oil circuit.

Electric shift was optional in that publication. Its control combines a shift tower, wiring harness and valve body, with a downshift inhibitor in the tower. A mechanical linkage and an electric harness are therefore different inspection subjects.

Look at the installed control before requesting a shift component.

The family’s oil-capacity table excludes the external circuit, and its cooler is supplied by the equipment manufacturer. An Allison transmission-only refill figure cannot establish the crane’s complete drained quantity. Record the transmission identification and cooler arrangement before choosing service information.

The publication likewise offers different torque converters and lockup arrangements. Those choices describe the transmission family; they do not prove which converter or control package Krupp fitted. Match the unit and its documentation before applying a family-level specification.

Source: Detroit Diesel Allison original CL(B)T 5000–6000 hauling-transmission publication.

Earlier reference entries and original manufacturer corrections
Model and field	Earlier entry	Manufacturer figure and scope	Source
KMK11000 Max Lift Capacity	2,000,000 lb	1,000 t at 4 m radius with 18 m heavy-duty jib and heavy-duty equipment; propped,140 t counterweight,360-degree DIN chart. Earlier2,000,000lb entry does not reproduce metric chart.	Original document
KMK11000 Make	Krupp	Mercedes-Benz engine manufacturer;Krupp is the crane manufacturer	Original document
KMK11000 Model	-diesel OM 407 A	Mercedes-Benz OM 407 A upper-structure engine	Original document
KMK11000 Gross Power	253 hp	186 kW (253 HP) published DIN output at1,800rpm;brochure does not label gross/net	Original document

Entries in this reference
Listing-entry count
1

Short answer

Krupp KMK11000: assembly, chart and driveline: all terrain crane.

Selected configuration figures
Configuration	Documented field and quantity
KMK11000	Max Lift Capacity 1,000 t at 4 m radius with 18 m heavy-duty jib and heavy-duty equipment; propped,140 t counterweight,360-degree DIN chart. Earlier2,000,000lb entry does not reproduce metric chart. [source] Min Height @ Max Raise Angle 45.94 ft

KMK11000 specification matrix — Boom
Specification	KMK11000
Min Height @ Max Raise Angle	45.94 ft
Max Height @ Max Raise Angle - No Jib	203.42 ft
Min Working Radius	13.13 ft
Max Working Radius	190.29 ft
Swing Speed	0.6 rpm
Max Lift Capacity	1,000 t at 4 m radius with 18 m heavy-duty jib and heavy-duty equipment; propped,140 t counterweight,360-degree DIN chart. Earlier2,000,000lb entry does not reproduce metric chart.
Number Of Sections	3

Dimensions and weight
Specification	KMK11000
Transport Length	72.84 ft
Transport Width	9.85 ft
Transport Height	13.13 ft
Carrier Length	58.57 ft
Upper Structure Tail Swing Radius	23.79 ft

Upper Structure Engine
Specification	KMK11000
Make	Mercedes-Benz engine manufacturer;Krupp is the crane manufacturer
Model	Mercedes-Benz OM 407 A upper-structure engine
Engine power (published measurement basis)	186 kW (253 HP) published DIN output at1,800rpm;brochure does not label gross/net
Power Measured @	1,800 rpm
Displacement	696.4 cu in

Carrier Engine
Specification	KMK11000
Model	-Diesel-engine OM 424 LA
Engine power (published measurement basis)	570 hp
Power Measured @	2,300 rpm
Displacement	1,338 cu in

Operational
Specification	KMK11000
Number Of Axels	10
Carrier Fuel Capacity	317.1 gal
Operating Voltage	24 V
Tire Size	14.00-24

Transmission and speeds
Specification	KMK11000
Transmission Type	Allison powershift CLBT 6061
Number Of Forward Gears	5
Number Of Reverse Gears	1
Max Speed - Forward	44.9 mph
Max Speed - Reverse	8.8 mph