Machine models
Kubota KX080-4S to KX080-4SW specifications
KX080-4S weight depends on the blade and tracks
Kubota's Canadian KX080-4S brochure distinguishes a standard blade from the hydraulic angle blade. With rubber tracks, the published operating weights are 18,365 and 19,225 lb respectively; with the listed steel tracks, they become 18,475 and 19,335 lb. Those include the stated operator allowance.
The old 41,160 lb entry cannot describe these brochure configurations.
The five suffix names retained in the historical reference grid do not replace that equipment identification. Kubota's brochure names the blade and track arrangements directly; it does not decode every suffix in that grid. Check what is fitted.
The angle blade has a different lift and below-ground travel range, so changing its weight label alone would leave an incomplete comparison.
Source: Kubota Canada 8922-01-CL, 2016, configuration schedule.The operator's manual supplies another useful track distinction
The KX080-4S manual's technical page separately lists a standard-blade cab with rubber tracks, 450 mm steel tracks and 600 mm steel tracks. The wider steel-track arrangement weighs 8,510 kg, compared with 8,330 kg for rubber and 8,380 kg for the narrower steel tracks. Its ground-pressure entry differs too.
A wide shoe is therefore more than an alternative size label in a parts order.
That manual also identifies the V3307-CR-TE4 as a four-cylinder engine displacing 3,331 cc, or 203.3 cubic inches. It separates maximum attachment flow from the machine's travel and swing figures, and states that the dimensions use Kubota's original bucket and 2100 arm. Keep an added attachment's geometry with its working-range assessment.
Source: KX080-4S operator's manual, technical data.Do not confuse the optional boom with the blade hose design
The European KX080-4 brochure offers an articulated, two-piece boom for reaching close to the machine, digging vertical walls and dumping farther or higher. It has its own boom pedal and working-range information. That is a separate option from the Canadian brochure's two-piece blade hoses, which have a service joint.
A photograph or advertisement saying “two-piece” needs the component identified before it establishes either boom geometry or the blade's service arrangement.
Sources: European KX080-4 boom option; Canadian blade-hose layout.| Listing-entry count |
|---|
| 5 |
Short answer
Kubota KX080-4S to KX080-4SW: full-size excavators.
| Configuration | Documented field and quantity |
|---|---|
| KX080-4S |
|
| KX080-4SA |
|
| KX080-4SG |
|
| KX080-4SGA |
|
| KX080-4SW |
|
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| Kubota | KX080-4S to KX080-4SW | 5 | KX080-4S, KX080-4SA, KX080-4SG, KX080-4SGA, and KX080-4SW |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Max Vertical Wall Digging Depth | 12.64 ft | 12.64 ft | 12.64 ft | 12.64 ft | 12.64 ft |
| Max Digging Depth | 15.1 ft | 15.1 ft | 15.1 ft | 15.1 ft | 15.1 ft |
| Max.Dumping Height | 17.23 ft | 17.23 ft | 17.23 ft | 17.23 ft | 17.23 ft |
| Mximum Dig Radius | 288.59 in | 288.59 in | 288.59 in | 288.59 in | 288.59 in |
| Max Digging Height | 23.96 ft | 23.96 ft | 23.96 ft | 23.96 ft | 23.96 ft |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Ground Clearance | 1.17 ft | 1.17 ft | 1.17 ft | 1.17 ft | 1.17 ft |
| Tail Swing Radius | 4.79 ft | 4.79 ft | 4.79 ft | 4.79 ft | 4.79 ft |
| Overall Height | 8.34 ft | 8.34 ft | 8.34 ft | 8.34 ft | 8.34 ft |
| Overall Length | 21.17 ft | 21.17 ft | 21.17 ft | 21.17 ft | 21.17 ft |
| Overall Width | 86.62 in | 86.62 in | 86.62 in | 86.62 in | 86.62 in |
| Crawler Length | 9.52 ft | 9.52 ft | 9.52 ft | 9.52 ft | 9.52 ft |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Shoe Size | 17.72 in | 17.72 in | 17.72 in | 17.72 in | 17.72 in |
| Ground Pressure | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Engine Model | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 |
| Gross Power | 66.6 hp | 66.6 hp | 66.6 hp | 66.6 hp | 66.6 hp |
| Net Power | 62.3 hp | 62.3 hp | 62.3 hp | 62.3 hp | 62.3 hp |
| Power Measured @ | 2,000 rpm | 2,000 rpm | 2,000 rpm | 2,000 rpm | 2,000 rpm |
| Displacement | 203.3 cu in / 3331 cc | 203.3 cu in / 3331 cc | 203.3 cu in / 3331 cc | 203.3 cu in / 3331 cc | 203.3 cu in / 3331 cc |
| Model Name | KX080-4 | KX080-4 Angle Blade | KX080-4 | KX080-4 Angle Blade | KX080-4 |
| Specification | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|
| Engine Make | Kubota | Kubota | Kubota | Kubota |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph | 1.7 mph | 1.7 mph | 1.7 mph | 1.7 mph |
| Travel Speed, High Range |
|
|
|
|
|
| Manufacturer Operating-Weight Configuration Range | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| AUX2 Maximum Oil Flow — Previously Mislabelled Fuel Tank | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Configuration Range | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal | 30.4 gal | 30.4 gal | 30.4 gal | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal | 35.7 gal | 35.7 gal | 35.7 gal | 35.7 gal |
| Hydraulic Pump Flow Capacity | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Swing Speed | 10.2 rpm | 10.2 rpm | 10.2 rpm | 10.2 rpm | 10.2 rpm |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Maximum Drop Below Ground | 1.7 ft | 1.7 ft | 1.7 ft | 1.7 ft | 1.7 ft |
| Blade Lift Height | 19.7 in | 19.7 in | 19.7 in | 19.7 in | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Boom Swing Left | 70 degrees | 70 degrees | 70 degrees | 70 degrees | 70 degrees |
| Boom Swing Right | 60 degrees | 60 degrees | 60 degrees | 60 degrees | 60 degrees |
| Source guide | Differing-field count reported |
|---|---|
| KX080-4S to KX080-4SW | 3 |
| Figure | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 3.2–3.4 (published configuration range) | 3.2–3.4 (published configuration range) | 3.2–3.4 (published configuration range) | 3.2–3.4 (published configuration range) | 3.2–3.4 (published configuration range) |
| Fuel tank per engine horsepower | 0.49 gal | 0.49 gal | 0.49 gal | 0.49 gal | 0.49 gal |
KX080-4S to KX080-4SW: owner reports
Related account: “Key errors, hose replacement and an engine that stalls at full stroke”: KX080-3.
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| The Farming Forum and Heavy Equipment Forums | full-size excavator | Kubota and the KX080 line that the KX080-4S, KX080-4SA, KX080-4SG, KX080-4SGA belongs to (no title names the exact model) | 165 |
| Title topic | Titles |
|---|---|
| electrical and sensors | 10 |
| hydraulics | 10 |
| engine power and smoke | 5 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| electrical and sensors | 10 | 6% |
| hydraulics | 10 | 6% |
| engine power and smoke | 5 | 3% |
| fuel system | 5 | 3% |
| parts and manuals | 5 | 3% |
- Kubota Kx080 4 Digger Sold (The Farming Forum, 2026-08-28)
- 2010 Kubota Kx080 New To US Re Wiring What The Previous Owner Jimmied (Heavy Equipment Forums, 2026-01-04)
- Kubota Kx080 Rubber Tracks (The Farming Forum, 2025-08-22)
- Kubota Kx080 One Track Loosens Despite Tightening (Heavy Equipment Forums, 2024-12-19)
| Date | Listing index | Equipment class | Names queried | Result |
|---|---|---|---|---|
| 2026-09-24 | MachineryTrader (machinerytrader.com) | full-size excavator | KX080-4S, KX080-4SA, KX080-4SG | No matching offers in this snapshot |
| Date | Database | Names queried | Result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Kubota; KX080-4S, KX080-4SA, KX080-4SG | No matching recall in the stated search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Forum threads |
|
| Federal agency data |
|
| Quantity | Earlier entry | Manufacturer entry or condition |
|---|---|---|
| KX080-4S Ground Pressure | 5.36 psi | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| KX080-4SA Ground Pressure | 5.36 psi | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| KX080-4SG Ground Pressure | 5.36 psi | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| KX080-4SGA Ground Pressure | 5.36 psi | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| KX080-4SW Ground Pressure | 5.36 psi | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| KX080-4S Displacement | 9,739 cu in | 203.3 cu in / 3331 cc |
| KX080-4SA Displacement | 9,739 cu in | 203.3 cu in / 3331 cc |
| KX080-4SG Displacement | 9,739 cu in | 203.3 cu in / 3331 cc |
| KX080-4SGA Displacement | 9,739 cu in | 203.3 cu in / 3331 cc |
| KX080-4SW Displacement | 9,739 cu in | 203.3 cu in / 3331 cc |
| KX080-4S Auxiliary Hydraulic Flow | 26.5 gpm | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| KX080-4SA Auxiliary Hydraulic Flow | 26.5 gpm | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| KX080-4SG Auxiliary Hydraulic Flow | 26.5 gpm | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| KX080-4SGA Auxiliary Hydraulic Flow | 26.5 gpm | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| KX080-4SW Auxiliary Hydraulic Flow | 26.5 gpm | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| KX080-4S Travel Speed, High Range | 3.1 mph |
|
| KX080-4SA Travel Speed, High Range | 3.1 mph |
|
| KX080-4SG Travel Speed, High Range | 3.1 mph |
|
| KX080-4SGA Travel Speed, High Range | 3.1 mph |
|
| KX080-4SW Travel Speed, High Range | 3.1 mph |
|
| KX080-4S Operating Weight Cabin | 27,337 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SA Operating Weight Cabin | 27,337 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SG Operating Weight Cabin | 27,337 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SGA Operating Weight Cabin | 27,337 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SW Operating Weight Cabin | 27,337 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4S Auxiliary Fuel Tank | 17.6 gal | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| KX080-4SA Auxiliary Fuel Tank | 17.6 gal | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| KX080-4SG Auxiliary Fuel Tank | 17.6 gal | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| KX080-4SGA Auxiliary Fuel Tank | 17.6 gal | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| KX080-4SW Auxiliary Fuel Tank | 17.6 gal | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| KX080-4S Operating Weight | 41,160 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SA Operating Weight | 41,160 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SG Operating Weight | 41,160 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SGA Operating Weight | 41,160 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4SW Operating Weight | 41,160 lb | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| KX080-4S Hydraulic Pump Flow Capacity | 19.9 gpm | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| KX080-4SA Hydraulic Pump Flow Capacity | 19.9 gpm | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| KX080-4SG Hydraulic Pump Flow Capacity | 19.9 gpm | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| KX080-4SGA Hydraulic Pump Flow Capacity | 19.9 gpm | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| KX080-4SW Hydraulic Pump Flow Capacity | 22.4 gpm | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| KX080-4S Swing Speed | 9.3 rpm | 10.2 rpm |
| KX080-4SA Swing Speed | 9.3 rpm | 10.2 rpm |
| KX080-4SG Swing Speed | 9.3 rpm | 10.2 rpm |
| KX080-4SGA Swing Speed | 9.3 rpm | 10.2 rpm |
| KX080-4SW Swing Speed | 9.3 rpm | 10.2 rpm |
| KX080-4S Blade width | 7.3 ft | 2200 mm / 7 ft 2.6 in |
| KX080-4SA Blade width | 7.3 ft | 2200 mm / 7 ft 2.6 in |
| KX080-4SG Blade width | 7.3 ft | 2200 mm / 7 ft 2.6 in |
| KX080-4SGA Blade width | 7.3 ft | 2200 mm / 7 ft 2.6 in |
| KX080-4SW Blade width | 7.3 ft | 2200 mm / 7 ft 2.6 in |
| KX080-4S Engine horsepower per 1,000 lb of weight | 1.5 | 3.2–3.4 (published configuration range) |
| KX080-4SA Engine horsepower per 1,000 lb of weight | 1.5 | 3.2–3.4 (published configuration range) |
| KX080-4SG Engine horsepower per 1,000 lb of weight | 1.5 | 3.2–3.4 (published configuration range) |
| KX080-4SGA Engine horsepower per 1,000 lb of weight | 1.5 | 3.2–3.4 (published configuration range) |
| KX080-4SW Engine horsepower per 1,000 lb of weight | 1.5 | 3.2–3.4 (published configuration range) |
Kubota KX080-4S to KX080-4SW: Configuration records
KX080-4S
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Max Vertical Wall Digging Depth | 12.64 ft |
| Max Digging Depth | 15.1 ft |
| Max.Dumping Height | 17.23 ft |
| Mximum Dig Radius | 288.59 in |
| Max Digging Height | 23.96 ft |
| Dimensions and weight | |
| Ground Clearance | 1.17 ft |
| Overall Height | 8.34 ft |
| Overall Length | 21.17 ft |
| Overall Width | 86.62 in |
| Tail Swing Radius | 4.79 ft |
| Crawler Length | 9.52 ft |
| Undercarriage | |
| Shoe Size | 17.72 in |
| Ground Pressure — Standard/Angle Blade and Rubber/Steel Conditions | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Engine | |
| Gross Power | 66.6 hp |
| Net Power | 62.3 hp |
| Power Measured @ | 2,000 rpm |
| Operational | |
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph |
| Travel Speed, High Range |
|
| Swing Mechanism | |
| Swing Speed | 10.2 rpm |
| Blade | |
| Maximum Drop Below Ground | 1.7 ft |
| Blade Lift Height | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in |
| Boom | |
| Boom Swing Left | 70 degrees |
| Boom Swing Right | 60 degrees |
| Additional specifications | |
| Engine Model | V3307-CR-TE4 |
| Model Name | KX080-4 |
| AUX2 Maximum Oil Flow — Earlier fuel-tank label was incorrect; this is a hydraulic flow quantity. | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Range by Configuration — 2016 Canadian KX080-4S blade/track schedule; identify actual equipment, not an assumed suffix. | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal |
| Variable Main Pump Capacity — Each of Two Pumps | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
KX080-4SA
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Max Vertical Wall Digging Depth | 12.64 ft |
| Max Digging Depth | 15.1 ft |
| Max.Dumping Height | 17.23 ft |
| Mximum Dig Radius | 288.59 in |
| Max Digging Height | 23.96 ft |
| Dimensions and weight | |
| Ground Clearance | 1.17 ft |
| Overall Height | 8.34 ft |
| Overall Length | 21.17 ft |
| Overall Width | 86.62 in |
| Tail Swing Radius | 4.79 ft |
| Crawler Length | 9.52 ft |
| Undercarriage | |
| Shoe Size | 17.72 in |
| Ground Pressure — Standard/Angle Blade and Rubber/Steel Conditions | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Engine | |
| Gross Power | 66.6 hp |
| Net Power | 62.3 hp |
| Power Measured @ | 2,000 rpm |
| Operational | |
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph |
| Travel Speed, High Range |
|
| Swing Mechanism | |
| Swing Speed | 10.2 rpm |
| Blade | |
| Maximum Drop Below Ground | 1.7 ft |
| Blade Lift Height | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in |
| Boom | |
| Boom Swing Left | 70 degrees |
| Boom Swing Right | 60 degrees |
| Additional specifications | |
| Engine Model | V3307-CR-TE4 |
| Model Name | KX080-4 Angle Blade |
| Engine Make | Kubota |
| AUX2 Maximum Oil Flow — Earlier fuel-tank label was incorrect; this is a hydraulic flow quantity. | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Range by Configuration — 2016 Canadian KX080-4S blade/track schedule; identify actual equipment, not an assumed suffix. | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal |
| Variable Main Pump Capacity — Each of Two Pumps | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
KX080-4SG
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Max Vertical Wall Digging Depth | 12.64 ft |
| Max Digging Depth | 15.1 ft |
| Max.Dumping Height | 17.23 ft |
| Mximum Dig Radius | 288.59 in |
| Max Digging Height | 23.96 ft |
| Dimensions and weight | |
| Ground Clearance | 1.17 ft |
| Overall Height | 8.34 ft |
| Overall Length | 21.17 ft |
| Overall Width | 86.62 in |
| Tail Swing Radius | 4.79 ft |
| Crawler Length | 9.52 ft |
| Undercarriage | |
| Shoe Size | 17.72 in |
| Ground Pressure — Standard/Angle Blade and Rubber/Steel Conditions | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Engine | |
| Gross Power | 66.6 hp |
| Net Power | 62.3 hp |
| Power Measured @ | 2,000 rpm |
| Operational | |
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph |
| Travel Speed, High Range |
|
| Swing Mechanism | |
| Swing Speed | 10.2 rpm |
| Blade | |
| Maximum Drop Below Ground | 1.7 ft |
| Blade Lift Height | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in |
| Boom | |
| Boom Swing Left | 70 degrees |
| Boom Swing Right | 60 degrees |
| Additional specifications | |
| Engine Model | V3307-CR-TE4 |
| Model Name | KX080-4 |
| Engine Make | Kubota |
| AUX2 Maximum Oil Flow — Earlier fuel-tank label was incorrect; this is a hydraulic flow quantity. | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Range by Configuration — 2016 Canadian KX080-4S blade/track schedule; identify actual equipment, not an assumed suffix. | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal |
| Variable Main Pump Capacity — Each of Two Pumps | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
KX080-4SGA
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Max Vertical Wall Digging Depth | 12.64 ft |
| Max Digging Depth | 15.1 ft |
| Max.Dumping Height | 17.23 ft |
| Mximum Dig Radius | 288.59 in |
| Max Digging Height | 23.96 ft |
| Dimensions and weight | |
| Ground Clearance | 1.17 ft |
| Overall Height | 8.34 ft |
| Overall Length | 21.17 ft |
| Overall Width | 86.62 in |
| Tail Swing Radius | 4.79 ft |
| Crawler Length | 9.52 ft |
| Undercarriage | |
| Shoe Size | 17.72 in |
| Ground Pressure — Standard/Angle Blade and Rubber/Steel Conditions | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Engine | |
| Gross Power | 66.6 hp |
| Net Power | 62.3 hp |
| Power Measured @ | 2,000 rpm |
| Operational | |
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph |
| Travel Speed, High Range |
|
| Swing Mechanism | |
| Swing Speed | 10.2 rpm |
| Blade | |
| Maximum Drop Below Ground | 1.7 ft |
| Blade Lift Height | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in |
| Boom | |
| Boom Swing Left | 70 degrees |
| Boom Swing Right | 60 degrees |
| Additional specifications | |
| Engine Model | V3307-CR-TE4 |
| Model Name | KX080-4 Angle Blade |
| Engine Make | Kubota |
| AUX2 Maximum Oil Flow — Earlier fuel-tank label was incorrect; this is a hydraulic flow quantity. | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Range by Configuration — 2016 Canadian KX080-4S blade/track schedule; identify actual equipment, not an assumed suffix. | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal |
| Variable Main Pump Capacity — Each of Two Pumps | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
KX080-4SW
| Specification | Source figure |
|---|---|
| Boom/Stick Option (Hex) 1 | |
| Max Vertical Wall Digging Depth | 12.64 ft |
| Max Digging Depth | 15.1 ft |
| Max.Dumping Height | 17.23 ft |
| Mximum Dig Radius | 288.59 in |
| Max Digging Height | 23.96 ft |
| Dimensions and weight | |
| Ground Clearance | 1.17 ft |
| Overall Height | 8.34 ft |
| Overall Length | 21.17 ft |
| Overall Width | 86.62 in |
| Tail Swing Radius | 4.79 ft |
| Crawler Length | 9.52 ft |
| Undercarriage | |
| Shoe Size | 17.72 in |
| Ground Pressure — Standard/Angle Blade and Rubber/Steel Conditions | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Engine | |
| Gross Power | 66.6 hp |
| Net Power | 62.3 hp |
| Power Measured @ | 2,000 rpm |
| Operational | |
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph |
| Travel Speed, High Range |
|
| Swing Mechanism | |
| Swing Speed | 10.2 rpm |
| Blade | |
| Maximum Drop Below Ground | 1.7 ft |
| Blade Lift Height | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in |
| Boom | |
| Boom Swing Left | 70 degrees |
| Boom Swing Right | 60 degrees |
| Additional specifications | |
| Engine Model | V3307-CR-TE4 |
| Model Name | KX080-4 |
| Engine Make | Kubota |
| AUX2 Maximum Oil Flow — Earlier fuel-tank label was incorrect; this is a hydraulic flow quantity. | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Manufacturer Operating-Weight Range by Configuration — 2016 Canadian KX080-4S blade/track schedule; identify actual equipment, not an assumed suffix. | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal |
| Variable Main Pump Capacity — Each of Two Pumps | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
Compare Kubota KX080-4S, KX080-4SA, KX080-4SG, KX080-4SGA, KX080-4SW
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Max Vertical Wall Digging Depth | 12.64 ft | 12.64 ft | 12.64 ft | 12.64 ft | 12.64 ft |
| Max Digging Depth | 15.1 ft | 15.1 ft | 15.1 ft | 15.1 ft | 15.1 ft |
| Max.Dumping Height | 17.23 ft | 17.23 ft | 17.23 ft | 17.23 ft | 17.23 ft |
| Mximum Dig Radius | 288.59 in | 288.59 in | 288.59 in | 288.59 in | 288.59 in |
| Max Digging Height | 23.96 ft | 23.96 ft | 23.96 ft | 23.96 ft | 23.96 ft |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Ground Clearance | 1.17 ft | 1.17 ft | 1.17 ft | 1.17 ft | 1.17 ft |
| Tail Swing Radius | 4.79 ft | 4.79 ft | 4.79 ft | 4.79 ft | 4.79 ft |
| Overall Height | 8.34 ft | 8.34 ft | 8.34 ft | 8.34 ft | 8.34 ft |
| Overall Length | 21.17 ft | 21.17 ft | 21.17 ft | 21.17 ft | 21.17 ft |
| Overall Width | 86.62 in | 86.62 in | 86.62 in | 86.62 in | 86.62 in |
| Crawler Length | 9.52 ft | 9.52 ft | 9.52 ft | 9.52 ft | 9.52 ft |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Shoe Size | 17.72 in | 17.72 in | 17.72 in | 17.72 in | 17.72 in |
| Ground Pressure | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) | 5.25 psi rubber / 5.36 psi steel (standard blade); 5.49 / 5.63 psi (angle blade) |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Engine Model | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 | V3307-CR-TE4 |
| Gross Power | 66.6 hp | 66.6 hp | 66.6 hp | 66.6 hp | 66.6 hp |
| Net Power | 62.3 hp | 62.3 hp | 62.3 hp | 62.3 hp | 62.3 hp |
| Power Measured @ | 2,000 rpm | 2,000 rpm | 2,000 rpm | 2,000 rpm | 2,000 rpm |
| Model Name | KX080-4 | KX080-4 Angle Blade | KX080-4 | KX080-4 Angle Blade | KX080-4 |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Auxiliary Hydraulic Flow | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) | 26.4 US gpm / 100 L/min (AUX1 maximum) |
| Travel Speed, Low Range | 1.7 mph | 1.7 mph | 1.7 mph | 1.7 mph | 1.7 mph |
| Travel Speed, High Range |
|
|
|
|
|
| Auxiliary Fuel Tank | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) | 17.6 US gpm / 66.6 L/min (AUX2 oil flow; not a fuel tank) |
| Operating Weight | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) | 18365–19335 lb / 8330–8770 kg (published blade/track configurations; suffix mapping unverified) |
| Fuel Capacity | 30.4 gal | 30.4 gal | 30.4 gal | 30.4 gal | 30.4 gal |
| Hydraulic System Fluid Capacity | 35.7 gal | 35.7 gal | 35.7 gal | 35.7 gal | 35.7 gal |
| Hydraulic Pump Flow Capacity | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 | 22.3 US gpm / 84.6 L/min per variable pump × 2 |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Swing Speed | 10.2 rpm | 10.2 rpm | 10.2 rpm | 10.2 rpm | 10.2 rpm |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Maximum Drop Below Ground | 1.7 ft | 1.7 ft | 1.7 ft | 1.7 ft | 1.7 ft |
| Blade Lift Height | 19.7 in | 19.7 in | 19.7 in | 19.7 in | 19.7 in |
| Blade width | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in | 2200 mm / 7 ft 2.6 in |
| Specification | KX080-4S | KX080-4SA | KX080-4SG | KX080-4SGA | KX080-4SW |
|---|---|---|---|---|---|
| Boom Swing Left | 70 degrees | 70 degrees | 70 degrees | 70 degrees | 70 degrees |
| Boom Swing Right | 60 degrees | 60 degrees | 60 degrees | 60 degrees | 60 degrees |
More in Kubota: KX080-5, KX057-4A1–KX057-4W1, KX080-3.