Machine models
Manitou MHT10160, MHT10210, MHT10180 and MRT3050: lifting arrangements
Load-centre distance changes the heavy MHT rating
The original MHT 10160 L Turbo sheet separates its shorter and longer load-centre conditions. Maximum capacity and capacity at maximum reach both change with that distance. The longest quoted reach is therefore not paired with the truck's largest capacity.
The sheet also separates weight without equipment, unladen weight with forks and laden weight with forks. A transport plan based on the first figure omits equipment included in the second. Identify the carriage and forks before comparing a seller's weight with the published truck weight.
Source: Original Manitou MHT 10160 L Turbo sheet, load-centre and equipment-weight conditions.
The American 10210 chart has its own fork assumptions
Manitou's January 2009 American MHT 10210 sheet specifies a load centre for its maximum capacity. Its two chart arrangements use different fork lengths. The chart notes also require capacity reductions for extended load centres and other attachments.
The hydraulic description gives steering and braking priority through a flow divider. The published pump flow is consequently not a promise that every function can receive the whole figure simultaneously. Match the load chart and attachment to the particular truck.
Source: Original American MHT 10210 specification, 15 January 2009, fork and hydraulic conditions.
MHT-10180 and MHT-X 10180 use different engine columns
The operator manual separates the Stage 4 OM 934LA installation from the Stage 3A OM 904LA used in the MHT-X column. The Stage 4 description includes SCR and AdBlue injection. The similar truck names do not make their after-treatment equipment interchangeable.
The manual also lists hand/arm vibration as acceleration, while the lifting and telescoping cycles use seconds. Those units belong to different measurements. A vibration value filed as a cycle time cannot be used to compare operator exposure.
Source: Original MHT-10180 operator manual, engine columns; noise, vibration and movement-time table.
The rotating MRT 3050 is a different lifting arrangement
The MRT Privilege family sheet gives the 3050 a rotating turret, hydropneumatic suspension and telescopic stabilizers. Its headline lifting-height condition is on stabilizers. That figure cannot establish the same lifting envelope while standing only on the tyres.
The 3050 column uses the Perkins six-cylinder engine, while the smaller columns in that edition use Mercedes-Benz four-cylinder engines. Its hydraulic table distinguishes the load-sensing piston pump from the gear pump. Hydraulic-oil capacity and fuel capacity have separate entries as well.
Keep the complete 3050 column together when checking service quantities or an advertised engine.
Source: Original MRT Privilege family sheet FT076NL A 0413, 3050 column, stabilizer condition and suspension drawing.
| Model and field | Earlier entry | Manufacturer figure and scope | Source |
|---|---|---|---|
| MHT 10160 Drawbar Pull | 114,322 lb | 15500 daN, European MHT10160L Turbo sheet; American base-model boundary requires identification | Original document |
| MHT 10180 Overall Height | 9.1 ft | 3.00 m (9 ft 10 in), 26 March 2020 MHT10180 technical sheet | Original document |
| MHT 10180 Vibration Affecting Hands/Arms | 2.5 sec | Less than 2.5 m/s2, ISO 5349-2 acceleration, original operator manual; not seconds | Original document |
| MRT 3050 Max Speed - Forward | 31.1 mph | 40 km/h, original FT076NL_A_0413 MRT3050 column | Original document |
| MHT 10160 Ground Clearance | 17.5 ft | 445 mm, European MHT10160L Turbo drawing G1; American base chassis requires identification | Original document |
| MHT 10210 Ground Clearance | 19 ft | 19 in, American MHT10210 sheet15January2009 | Original document |
| MRT 3050 Ground Clearance | 16.54 ft | 0.42 m, original2013MRT3050 suspension drawing H | Original document |
| MHT 10180 Displacement | 18,991 cu in | 5100 cm3 (311.22 cu in), March2020 technical sheet; separate operator manual5.13L5130cm3 | Original document |
| Listing-entry count |
|---|
| 4 |
Short answer
Manitou MHT10160, MHT10210, MHT10180 and MRT3050: lifting arrangements: telehandlers.
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| Manitou | MHT 10160 to MRT 3050 | 4 | MHT 10160, MHT 10210, MHT 10180, and MRT 3050 |
| Specification | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Length To Fork Face | 21.67 ft | 22.5 ft | 21.1 ft | 25.54 ft |
| Measurement and equipment basis (specified in each cell) | European MHT10160L Turbo Dimension G1: 445 mm, European MHT10160L Turbo drawing G1; American base chassis requires identification | Ground Clearance: 19 in, American MHT10210 sheet15January2009 | Ground Clearance: 1.5 ft | Ground Clearance: 0.42 m, original2013MRT3050 suspension drawing H |
| Width Over Tires | 8.17 ft | 8.75 ft | 8.31 ft | 8.2 ft |
| Overall Height | 9.58 ft | 9.75 ft | 3.00 m (9 ft 10 in), 26 March 2020 MHT10180 technical sheet | 10.44 ft |
| Wheelbase | 14.25 ft | 12 ft | 12.4 ft | 12.31 ft |
| Turning Radius Outside Tires | 18.58 ft | 19.83 ft | 18 ft | 16.11 ft |
| Specification | MHT 10180 |
|---|---|
| Weight | 52,911 lb |
| Specification | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Max Lift Height | 31.75 ft | 31.75 ft | 31.7 ft | 97.45 ft |
| Max Forward Reach | 18.18 ft | 19 ft | 18.3 ft | 83.67 ft |
| Max Lift Capacity | 36,000 lb | 46,000 lb | 39,683 lb | 11,021 lb |
| Specification | MHT 10160 | MRT 3050 |
|---|---|---|
| Max Load At Max Reach | 9,250 lb | 661.39 lb |
| Specification | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Max Load At Max Height | 15,430 lb | 46,000 lb | 4,409 lb |
| Specification | MHT 10180 |
|---|---|
| Boom Extension Time - Unladen | 13.5 sec |
| Lowering Time - Unladen | 25 sec |
| Lifting Time - Unladen | 33 sec |
| Dump | 7 sec |
| Crowd | 7 sec |
| Boom Retraction Time - Unladen | 13.4 sec |
| Specification | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Engine Model | OM 904 LA Turbo Diesel | OM 904 LA Turbo Diesel | 1106DE66TA - Euro3 |
| Specification | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Gross Power | 175 hp | 175 hp | 176 hp | 213.3 hp |
| Max Torque | 498 lb-ft | 498 lb-ft | 553.2 lb-ft | 687.5 lb-ft |
| Displacement | 259 cu in | 259 cu in | 5100 cm3 (311.22 cu in), March2020 technical sheet; separate operator manual5.13L5130cm3 | 402.8 cu in |
| Specification | MHT 10160 |
|---|---|
| Aspiration | turbocharged |
| Specification | MHT 10210 | MHT 10180 |
|---|---|---|
| Number Of Cylinders | 4 | 4 |
| Specification | MHT 10210 |
|---|---|
| Torque Measured @ | 1,400 rpm |
| Specification | MHT 10180 |
|---|---|
| Fuel | Diesel |
| Emission Tier Level | Stage IV / Tier 4 Final |
| Injection System | Direct |
| Engine Make | Mercedes |
| Engine Type | OM 934 LA. E4-3 |
| Cooling System | Water |
| System Voltage | 24 V |
| Specification | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Operating Weight | 49,165 lb | 59,282 lb | 50,398 lb |
| Fuel Capacity | 52 gal | 53 gal | 81.9 gal |
| Tire Size | 16.00R25 | 23.5 R 25 | 17.5R25 |
| Specification | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Hydraulic System Fluid Capacity | 76 gal | 77 gal | 76.6 gal | 75.3 gal |
| Specification | MHT 10160 | MHT 10180 | MRT 3050 |
|---|---|---|---|
| Measurement and equipment basis (specified in each cell) | European MHT10160L Turbo Drawbar Pull: 15500 daN, European MHT10160L Turbo sheet; American base-model boundary requires identification | Drawbar Pull: 35,901 lb | Drawbar Pull: 23,620 lb |
| Specification | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Transmission Type | hydrostatic | Hydrostatic | Hydrostatic | powershift |
| Specification | MHT 10160 | MHT 10210 |
|---|---|---|
| Number Of Forward Gears | 2 | 2 |
| Number Of Reverse Gears | 2 | 2 |
| Specification | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Max Speed - Forward | 16 mph | 16 mph | 40 km/h, original FT076NL_A_0413 MRT3050 column |
| Specification | MHT 10210 |
|---|---|
| Max Speed - Reverse | 16 mph |
| Specification | MHT 10180 |
|---|---|
| Number Of Wheels Front | 2 |
| Number Of Wheels Rear | 2 |
| Driving Position Noise Levels | 80 dB |
| Environmental Noise Levels | 107 dB |
| Vibration Affecting Hands/Arms | Less than 2.5 m/s2, ISO 5349-2 acceleration, original operator manual; not seconds |
| Max Speed | 15.5 mph |
| Specification | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Pump Type | two electronically regulated variable displacement pumps | two electronically regulated variable displacement piston pumps | variable displacement load sensing piston pump |
| Pump Flow Capacity | 45 gpm | 45 gpm | 43.6 gpm |
| Relief Valve Pressure | 5,000 psi | 5,000 psi | 3,916 psi |
| Specification | MHT 10180 |
|---|---|
| Pressure | 5,076 psi |
| Source guide | Differing-field count reported |
|---|---|
| MHT 10160 to MRT 3050 | 52 |
| Figure | MHT 10160 | MHT 10210 | MHT 10180 | MRT 3050 |
|---|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 3.6 | 3.0 | 3.3 | 4.2 |
| Figure | MHT 10160 | MHT 10210 | MRT 3050 |
|---|---|---|---|
| Pump flow per engine horsepower | 0.26 gpm | 0.26 gpm | 0.20 gpm |
| Fuel tank per engine horsepower | 0.30 gal | 0.30 gal | 0.38 gal |
Manitou MHT10160, MHT10210, MHT10180 and MRT3050: lifting arrangements: telehandler
MHT 10160 to MRT 3050: forum references
Related discussion: “Manitou Masted Or Telescopic Handler For Parts”: 6034XT and 16 related models.
| Date | Listing index | Equipment class | Names queried | Result |
|---|---|---|---|---|
| 2026-09-24 | MachineryTrader (machinerytrader.com) | telehandler | MHT 10160, MHT 10210, MHT 10180 | No matching offers in this snapshot |
| Date | Database | Names queried | Result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Manitou; MHT 10160, MHT 10210, MHT 10180 | No matching recall in the stated search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Federal agency data |
|
Manitou MHT10160, MHT10210, MHT10180 and MRT3050: lifting arrangements: Configuration records
MHT 10160
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Length To Fork Face | 21.67 ft |
| Width Over Tires | 8.17 ft |
| Overall Height | 9.58 ft |
| Wheelbase | 14.25 ft |
| Turning Radius Outside Tires | 18.58 ft |
| Lift | |
| Max Lift Height | 31.75 ft |
| Max Forward Reach | 18.18 ft |
| Max Load At Max Reach | 9,250 lb |
| Max Load At Max Height | 15,430 lb |
| Max Lift Capacity | 36,000 lb |
| Engine | |
| Engine Model | OM 904 LA Turbo Diesel |
| Gross Power | 175 hp |
| Max Torque | 498 lb-ft |
| Displacement | 259 cu in |
| Aspiration | turbocharged |
| Operational | |
| Operating Weight | 49,165 lb |
| Fuel Capacity | 52 gal |
| Hydraulic System Fluid Capacity | 76 gal |
| Tire Size | 16.00R25 |
| Transmission and speeds | |
| Transmission Type | hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 16 mph |
| Hydraulic | |
| Pump Type | two electronically regulated variable displacement pumps |
| Pump Flow Capacity | 45 gpm |
| Relief Valve Pressure | 5,000 psi |
| Additional specifications | |
| European MHT10160L Turbo Drawbar Pull | 15500 daN, European MHT10160L Turbo sheet; American base-model boundary requires identification [source] [source] |
| European MHT10160L Turbo Dimension G1 | 445 mm, drawing dimension G1 in original L Turbo sheet; American base-model chassis not established [source] |
| L Turbo Load Center And Equipment Scope | Original L Turbo: 16000 kg at600 mm versus13000 kg at1200 mm load center; max-height7000 kg; max-reach4200/3500 kg in respective arrangements. Bare22300 kg versus23615 kg withforks; OM904LA125 kW170HP publication differs from American175HP. Fork carriage and chart conditions remain separate. [source] |
MHT 10210
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Length To Fork Face | 22.5 ft |
| Width Over Tires | 8.75 ft |
| Overall Height | 9.75 ft |
| Wheelbase | 12 ft |
| Turning Radius Outside Tires | 19.83 ft |
| Ground Clearance | 19 in, original American sheet dated 15 January 2009 [source] |
| Lift | |
| Max Lift Height | 31.75 ft |
| Max Forward Reach | 19 ft |
| Max Load At Max Height | 46,000 lb |
| Max Lift Capacity | 46,000 lb |
| Engine | |
| Engine Model | OM 904 LA Turbo Diesel |
| Gross Power | 175 hp |
| Max Torque | 498 lb-ft |
| Displacement | 259 cu in |
| Number Of Cylinders | 4 |
| Torque Measured @ | 1,400 rpm |
| Operational | |
| Operating Weight | 59,282 lb |
| Fuel Capacity | 53 gal |
| Hydraulic System Fluid Capacity | 77 gal |
| Tire Size | 23.5 R 25 |
| Transmission and speeds | |
| Transmission Type | Hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 16 mph |
| Max Speed - Reverse | 16 mph |
| Hydraulic | |
| Pump Type | two electronically regulated variable displacement piston pumps |
| Pump Flow Capacity | 45 gpm |
| Relief Valve Pressure | 5,000 psi |
| Additional specifications | |
| January2009 Fork And Hydraulic Scope | 46000 lb maximum at36 in load center; charts distinguish72/96 in forks with72 in homogeneous-cube condition. Extended load centers require reductions. Two electronically regulated pumps45gpm5000psi; flow-divider priority for steering/braking. Ground19in, not19ft. [source] |
MHT 10180
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Length To Fork Face | 21.1 ft |
| Ground Clearance | 1.5 ft |
| Width Over Tires | 8.31 ft |
| Overall Height | 3.00 m (9 ft 10 in), 26 March 2020 MHT10180 technical sheet [source] |
| Wheelbase | 12.4 ft |
| Turning Radius Outside Tires | 18 ft |
| Weight | 52,911 lb |
| Lift | |
| Max Lift Height | 31.7 ft |
| Max Forward Reach | 18.3 ft |
| Max Lift Capacity | 39,683 lb |
| Boom Extension Time - Unladen | 13.5 sec |
| Lowering Time - Unladen | 25 sec |
| Lifting Time - Unladen | 33 sec |
| Dump | 7 sec |
| Crowd | 7 sec |
| Boom Retraction Time - Unladen | 13.4 sec |
| Engine | |
| Gross Power | 176 hp |
| Max Torque | 553.2 lb-ft |
| Number Of Cylinders | 4 |
| Fuel | Diesel |
| Emission Tier Level | Stage IV / Tier 4 Final |
| Injection System | Direct |
| Engine Make | Mercedes |
| Engine Type | OM 934 LA. E4-3 |
| Cooling System | Water |
| System Voltage | 24 V |
| Displacement | 5100 cm3 (311.22 cu in), March2020 sheet; separate original operator manual gives5.13 L/5130 cm3 [source] |
| Operational | |
| Hydraulic System Fluid Capacity | 76.6 gal |
| Drawbar Pull | 35,901 lb |
| Transmission and speeds | |
| Transmission Type | Hydrostatic |
| Number Of Wheels Front | 2 |
| Number Of Wheels Rear | 2 |
| Driving Position Noise Levels | 80 dB |
| Environmental Noise Levels | 107 dB |
| Vibration Affecting Hands/Arms | Less than 2.5 m/s2, ISO 5349-2 acceleration, original operator manual; not seconds [source] |
| Max Speed | 15.5 mph |
| Hydraulic | |
| Pressure | 5,076 psi |
| Additional specifications | |
| Stage4 And MHT-X Engine Scope | 2020 MHT10180 OM934LA E4-3 has4cylinders/5100cm3. Original operator manual Stage4MHT uses5.13L5130cm3,110x135mm and750Nm1200–1600rpm; MHT-X Stage3AOM904LA uses4.25L4250cm3. Stage4SCR/AdBlue separate from Stage3A. Manual hand/arm vibration<2.5m/s2. Source-specific weights and cycle times are not universal. [source] |
MRT 3050
| Specification | Source figure |
|---|---|
| Dimensions and weight | |
| Length To Fork Face | 25.54 ft |
| Width Over Tires | 8.2 ft |
| Overall Height | 10.44 ft |
| Wheelbase | 12.31 ft |
| Turning Radius Outside Tires | 16.11 ft |
| Ground Clearance | 0.42 m, original FT076NL_A_0413 suspension drawing H; mid-suspension condition [source] |
| Lift | |
| Max Lift Height | 97.45 ft |
| Max Forward Reach | 83.67 ft |
| Max Load At Max Reach | 661.39 lb |
| Max Load At Max Height | 4,409 lb |
| Max Lift Capacity | 11,021 lb |
| Engine | |
| Engine Model | 1106DE66TA - Euro3 |
| Gross Power | 213.3 hp |
| Max Torque | 687.5 lb-ft |
| Displacement | 402.8 cu in |
| Operational | |
| Operating Weight | 50,398 lb |
| Fuel Capacity | 81.9 gal |
| Hydraulic System Fluid Capacity | 75.3 gal |
| Drawbar Pull | 23,620 lb |
| Tire Size | 17.5R25 |
| Transmission and speeds | |
| Transmission Type | powershift |
| Max Speed - Forward | 40 km/h, original FT076NL_A_0413 MRT3050 column [source] |
| Hydraulic | |
| Pump Type | variable displacement load sensing piston pump |
| Pump Flow Capacity | 43.6 gpm |
| Relief Valve Pressure | 3,916 psi |
| Additional specifications | |
| April2013 Rotating Configuration Scope | FT076NL_A_0413: Perkins1106DE66TA Euro3,6cylinders6600cc159kW216PS,932Nm1400rpm. Continuous turret rotation;4triplex telescopic stabilizers; hydropneumatic suspension. Published4999kg capacity at500mm and29.70mheight onstabilizers. Piston165L/min270bar separate gear74L/min220bar; 40km/h. Ground0.42m drawing, not16.54ft. [source] |
More in Manitou: MLT 840-115 PS/2 related models specs, MLT 523 T/MLT 523 Turbo MU specs, MRT 1850/MRT 2150/MRT 2540 specs.