Machine models

Terex A300 to RT440B specifications

The A300's last boom element has a different setting procedure

The A300 brochure describes four rectangular boom elements, with the final element set through an external manual arrangement and mechanically locked. The inner powered elements extend proportionally. A fully extended boom length therefore does not mean that every element moves from the cab in the same way.

Identify the final-element arrangement before comparing deployment with another crane.

Its weight schedule is also conditional: no auxiliary winch, no extensions, and the specified standard tires. The earlier six-digit pound entry was incorrect. The manufacturer's axle loads describe a much smaller machine, and those axle figures matter separately when assessing access or transport.

A lifting-capacity number measures neither the crane's travel weight nor its axle loading.

Source: Terex Bendini A300 original brochure, technical pages 4–5 and dimension drawing.

A350 hydraulic extension differs from the A300 arrangement

The A350 uses a double-extension cylinder for the inner boom elements and an internal chain system for the outer element. Its brochure describes proportional extension throughout that arrangement. The similar Iveco engine designation does not make the two booms interchangeable.

The A350 also lists a two-speed main winch and an optional auxiliary winch, whose rope length differs from the main winch. Check which winches are actually included in a sale.

Source: Terex Bendini A350 original technical brochure, pages 4–5.

RC35 and RC40: maximum load and reach favor different questions

The RC35's documented boom reaches farther than the RC40's in these original sheets, despite its lower headline lifting capacity. A heavier maximum lift does not guarantee more boom reach. Their specification pages identify different axle distributions too.

Use the named model's mass schedule and the correct boom arrangement; averaging the two would erase the very differences that decide which crane suits the site.

Sources: Terex RC35, original 42760 revision 02; Terex RC40, original 42761 revision 01.

The A400 uses a different engine family

The A400 technical schedule names a Cummins B5.9 with displacement in cubic decimeters. The earlier cubic-inch label here was wrong. Its listed engine family and emissions approval differ from the A300's Iveco installation.

Match parts to the installed engine plate; the DANA transmission name shared by these cranes does not identify the engine.

Source: Terex A400 original manufacturer brochure 38723 revision 04.

The RT440B's section sequence and support position

The RT440B brochure gives its second boom section independent movement; the remaining outer sections extend proportionally. That sequence differs from the A300's manually set outer element. The RT440B also supplies distinct charts for its support arrangements, including a mechanically pinned intermediate outrigger position.

An overall outrigger width alone does not identify which chart applies.

Terex labels this brochure a specification sheet, not an operating load chart. Its own front-page capacity and later chart heading disagree, so the complete chart belonging to the individual crane must settle an actual lift. The corrected length and tip-height entries here describe geometry; they do not authorize a load.

Source: Original RT440B brochure printed May 25, 2007.

Earlier Terex entries and original-document corrections; earlier entries are not operating specifications
Model and field	Earlier entry	Manufacturer quantity and condition
A300 Min Height @ Max Raise Angle	26.42 ft	8.0 m retracted BOOM LENGTH,not minimum hook height
A350 Min Height @ Max Raise Angle	28.88 ft	8.8 m retracted BOOM LENGTH,not minimum hook height
RC35 Min Height @ Max Raise Angle	32.49 ft	9.9 m retracted BOOM LENGTH,not minimum hook height
RC40 Min Height @ Max Raise Angle	29.86 ft	9.1 m retracted BOOM LENGTH,2007 brochure
RT440B Min Height @ Max Raise Angle	26 ft	31 ft /9.5 m retracted BOOM LENGTH,not minimum hook height
A400 Min Height @ Max Raise Angle	31.5 ft	9.6 m retracted BOOM LENGTH,not minimum hook height
A300 Max Height @ Max Raise Angle - No Jib	78.91 ft	26.0 m BOOM HEAD HEIGHT,not extended boom length
A350 Max Height @ Max Raise Angle - No Jib	90.56 ft	30.2 m BOOM HEAD HEIGHT,not extended boom length
RC35 Max Height @ Max Raise Angle - No Jib	101.38 ft	33 m BOOM HEAD HEIGHT,not extended boom length
RC40 Max Height @ Max Raise Angle - No Jib	89.9 ft	29.5 m BOOM HEAD HEIGHT,not extended boom length
RT440B Max Height @ Max Raise Angle - No Jib	118 ft	128 ft /39 m maximum TIP HEIGHT,not working hook clearance
A400 Max Height @ Max Raise Angle - No Jib	100.4 ft	31.6 m BOOM HEAD HEIGHT,not extended boom length
A300 Number Of Sections	5	4 rectangular boom elements
A350 Number Of Sections	5	4 rectangular boom elements
RC35 Number Of Sections	5	4 rectangular boom elements
RC40 Number Of Sections	5	4 octagonal boom elements,2007 brochure
A300 Wheelbase	10.5 in	3200 mm,calculated from1765+1435mm axle-centre dimensions
A350 Wheelbase	10.5 in	3200 mm,calculated from1435+1765mm axle-centre dimensions
RC35 Wheelbase	11.88 in	3620 mm,calculated from1810+1810mm axle-centre dimensions
RC40 Wheelbase	11.88 in	3620 mm,calculated from1810+1810mm axle-centre dimensions,2010drawing
RT440B Wheelbase	11.88 in	143 in /3.62 m,as printed in original technical sheet
A300 Engine Model	F4GE9584D*J601	IVECO F4GE9684D*J601
A350 Max Torque	958.9 lb-ft	620 N-m at1300rpm,original manufacturer schedule
A300 Gross Power	143.5 hp	107 kW maximum engine output,manufacturer standard unspecified
A350 Gross Power	143.5 hp	107 kW maximum engine output,manufacturer standard unspecified
RC35 Gross Power	159.6 hp	119 kW maximum engine output,manufacturer standard unspecified
RC40 Gross Power	159.6 hp	119 kW maximum engine output,2007manufacturer standard unspecified
A400 Gross Power	151.6 hp	113 kW maximum engine output,manufacturer standard unspecified
A400 Displacement	5.9 cu in	5.88 cubic decimeters (litres),original Cummins B5.9 installation
RT440B Net Power	160 hp	160 hp /119 kW rated engine output;net standard not identified
A300 Operating Weight	531,314 lb	24.1 t,standard14.00R24 tires;no auxiliary winch or extensions
A350 Operating Weight	562,179 lb	25.5 t,standard14.00R24 tires;no auxiliary winch or extensions
RC35 Operating Weight	610,681 lb	27.7 t,standard16.00R25 tires;no auxiliary winch or extensions
RC40 Operating Weight	606,271 lb	27.5 t,2007standard16.00R25 tires,no auxiliary winch or extensions;2010edition separately lists27700kg without hook block
RT440B Hydraulic System Fluid Capacity	111 gal	420 L hydraulic RESERVOIR,printed92gal;not complete-system fill
A300 Transmission Type	DNDA series 20000: powershift with torque converter	DANA series20000 powershift with torque converter
RT440B Transmission Type	range-shift type ower shift transmission with integral torque converter	Range-shift powershift with integral torque converter,3+3forward/3+3reverse

Entries in this reference
Listing-entry count
8

Short answer

Terex A300 to RT440B: rough terrain cranes.

Selected configuration figures
Configuration	Documented field and quantity
A300	Operating Weight 24.1 t,standard14.00R24 tires;no auxiliary winch or extensions [source] Max Lift Capacity 66,139 lb
A350	Operating Weight 25.5 t,standard14.00R24 tires;no auxiliary winch or extensions [source] Max Lift Capacity 66,139 lb
RC35	Operating Weight 27.7 t,standard16.00R25 tires;no auxiliary winch or extensions [source] Max Lift Capacity 77,162 lb
RC40	Operating Weight 27.5 t,2007standard16.00R25 tires,no auxiliary winch or extensions;2010edition separately lists27700kg without hook block [source] Max Lift Capacity 92,594 lb
RC45	Net Power 159.6 hp Max Lift Capacity 97,003 lb
RT440B	Operating Weight 61,290 lb Max Lift Capacity 80,000 lb
A400	Operating Weight 60,848 lb Max Lift Capacity 77,162 lb
RT35	Gross Power 139.5 hp Max Lift Capacity 77,162 lb

A300 to RT440B specification matrix — Listing labels reported by the source
Publisher name	Source guide	Listing-entry count	Labels named by the source
Terex	A300 to RT440B	8	A300, A350, RC35, RC40, RC45, RT440B, and 2 more

Boom
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Min Height @ Max Raise Angle	8.0 m retracted BOOM LENGTH,not minimum hook height	8.8 m retracted BOOM LENGTH,not minimum hook height	9.9 m retracted BOOM LENGTH,not minimum hook height	9.1 m retracted BOOM LENGTH,2007 brochure	31.17 ft	31 ft /9.5 m retracted BOOM LENGTH,not minimum hook height	9.6 m retracted BOOM LENGTH,not minimum hook height	29.86 ft
Max Height @ Max Raise Angle - No Jib	26.0 m BOOM HEAD HEIGHT,not extended boom length	30.2 m BOOM HEAD HEIGHT,not extended boom length	33 m BOOM HEAD HEIGHT,not extended boom length	29.5 m BOOM HEAD HEIGHT,not extended boom length	122.71 ft	128 ft /39 m maximum TIP HEIGHT,not working hook clearance	31.6 m BOOM HEAD HEIGHT,not extended boom length	98.76 ft
Max Elevating Angle	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees
Max Lift Capacity	66,139 lb	66,139 lb	77,162 lb	92,594 lb	97,003 lb	80,000 lb	77,162 lb	77,162 lb
Number Of Sections	4 rectangular boom elements	4 rectangular boom elements	4 rectangular boom elements	4 octagonal boom elements,2007 brochure	6	5	4	4

Specification	A300	A350	RC35	RC40	RC45	RT440B
Min Operating Radius	9.85 ft	9.85 ft	9.85 ft	9.85 ft	8.21 ft	10 ft
Max Operating Radius	78.75 ft	82.03 ft	68.9 ft	82.03 ft	104.99 ft	70 ft

Dimensions and weight
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Transport Length	31.62 ft	34.78 ft	38.55 ft	35.88 ft	36.9 ft	36.9 ft	37.24 ft	35.66 ft
Wheelbase	3200 mm,calculated from1765+1435mm axle-centre dimensions	3200 mm,calculated from1435+1765mm axle-centre dimensions	3620 mm,calculated from1810+1810mm axle-centre dimensions	3620 mm,calculated from1810+1810mm axle-centre dimensions,2010drawing	11.88 in	143 in /3.62 m,as printed in original technical sheet	137.8 in	125.99 in
Width W/ Outriggers Extended	18.05 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft
Upper Structure Tail Swing Radius	10.24 ft	10.98 ft	11.91 ft	11.91 ft	12.57 ft	11.91 ft	11.26 ft	11.02 ft

Specification	A300	A350	RC35	RC40	RC45	A400	RT35
Transport Width	8.21 ft	8.37 ft	8.37 ft	8.37 ft	8.37 ft	8.37 ft	8.31 ft
Transport Height	11.16 ft	11.09 ft	11.13 ft	11.13 ft	11.13 ft	11.32 ft	10.96 ft
Ground Clearance	1.19 ft	1.05 ft	1.19 ft	1.19 ft	1.19 ft	1.19 ft	1.84 ft

Specification	A300	A350	RC35	RC40	RC45	RT440B
Carrier/Base Length	19.26 ft	20.81 ft	21.92 ft	21.92 ft	21.92 ft	22.62 ft

Engine
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Engine Model	IVECO F4GE9684D*J601	F4GE9684D*J601	QSB6.7	QSB6.7	QSB6.7	QSB6.7	B5.9	QSB4.5
Max Torque	457.3 lb-ft	620 N-m at1300rpm,original manufacturer schedule	539.9 lb-ft	539.9 lb-ft	539.9 lb-ft	540 lb-ft	452.9 lb-ft	371.8 lb-ft

Specification	A300	A350	RC35	RC40	A400	RT35
Gross Power	107 kW maximum engine output,manufacturer standard unspecified	107 kW maximum engine output,manufacturer standard unspecified	119 kW maximum engine output,manufacturer standard unspecified	119 kW maximum engine output,2007manufacturer standard unspecified	113 kW maximum engine output,manufacturer standard unspecified	139.5 hp

Specification	A300	A350	RC35	RC40	RT440B	A400	RT35
Power Measured @	2,300 rpm	2,300 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,500 rpm	2,000 rpm
Torque Measured @	1,300 rpm	1,300 rpm	1,400 rpm	1,400 rpm	1,400 rpm	1,500 rpm	1,800 rpm

Specification	A300	A350	RC40	RC45	RT440B	A400
Displacement	415 cu in	415 cu in	408.9 cu in	408.9 cu in	408.9 cu in	5.88 cubic decimeters (litres),original Cummins B5.9 installation

Specification	A300	A350	RC35	RC40	RC45	RT440B
Aspiration	Turbo supercharged	Turbo supercharger	Turbo supercharged	Turbo supercharged	turbo supercharged	turbocharged + aircooled

Specification	RC45	RT440B
Net Power	159.6 hp	160 hp /119 kW rated engine output;net standard not identified

Specification	A400	RT35
Engine Make	CUMMINS	Cummins

Operational
Specification	A300	A350	RC35	RC40	RT440B	A400
Operating Weight	24.1 t,standard14.00R24 tires;no auxiliary winch or extensions	25.5 t,standard14.00R24 tires;no auxiliary winch or extensions	27.7 t,standard16.00R25 tires;no auxiliary winch or extensions	27.5 t,2007standard16.00R25 tires,no auxiliary winch or extensions;2010edition separately lists27700kg without hook block	61,290 lb	60,848 lb

Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Fuel Capacity	63.5 gal	63.5 gal	79.3 gal	79.3 gal	79.3 gal	79.3 gal	63.5 gal	63.5 gal
Tire Size	14R24	14R24	16R25	16R25	16R25	20.5x25 PR	16.00 R 25	14.00 R 24

Specification	A300	A350	RC35	RC40	RC45	RT440B	A400
Operating Voltage	24 V	24 V	24 V	24 V	24 V	24 V	24 V
Alternator Supplied Amperage	70 amps	70 amps	70 amps	70 amps	70 amps	70 amps	70 amps

Specification	RT440B	A400	RT35
Hydraulic System Fluid Capacity	420 L hydraulic RESERVOIR,printed92gal;not complete-system fill	64.8 gal	103.1 gal

Transmission and speeds
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400
Transmission Type	DANA series20000 powershift with torque converter	DANA series 20000	DANA series 20000: powershift with torque converter	DANA series 20000: powershift with torque converter	DANA series 20000	Range-shift powershift with integral torque converter,3+3forward/3+3reverse	DANA Series 20000
Number Of Forward Gears	6	6	6	6	6	6	6
Number Of Reverse Gears	6	6	6	6	6	6	6
Max Speed - Forward	22.4 mph	22.4 mph	21.2 mph	21.2 mph	21.2 mph	21.2 mph	21.2 mph

Specification	RT440B
Max Speed - Reverse	21.2 mph

Variants — Source comparison annotation
Source guide	Differing-field count reported
A300 to RT440B	34

Ratios — Earlier calculated ratios before the manufacturer corrections; historical entries,not current performance ratings
Figure	A300	A350	RC35	RC40	RT440B	A400
Engine horsepower per 1,000 lb of weight	0.3	0.3	0.3	0.3	2.6	2.5

Earlier calculated ratios before the manufacturer corrections; historical entries,not current performance ratings
Figure	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Fuel tank per engine horsepower	0.44 gal	0.44 gal	0.50 gal	0.50 gal	0.50 gal	0.50 gal	0.42 gal	0.46 gal

Terex A300 to RT440B: rough terrain crane

A300 to RT440B: forum references

Related discussion: “Swing Bearings Yes Plural Popping Bolts On Terex Rt555 1 Cranes”: 2857 and 15 related models.

Used market for the A300 to RT440B — Dated first-page listing snapshot
Observation date	Listing source	Equipment search	Listings
2026-09-24	MachineryTrader	Terex rough terrain crane	5

Model	Listed	Model years	Lowest asking	Highest asking	Median asking	Median hours
A300	2	2006	$119,558	$119,558	$119,558	3,456
RC40	1	2007	$153,718	$153,718	$153,718	7,938
RT35	2	2016 to 2020	None shown	None shown	None shown	None shown

A300 to RT440B: recall reference — Dated CPSC search
Search date	Database	Names queried	Search result
2026-09-24	U.S. Consumer Product Safety Commission	Terex together with the rough terrain crane A300, A350, RC35, RC40	No matching recall in this search

Sources for this page
Evidence class	Document, classification and recorded date
Reference site	Reference site: Terex A300 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex A350 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex RC35 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex RC40 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex RC45 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex RT440B — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex A400 — RitchieSpecs. Observed 2026-09-24.
Reference site	Reference site: Terex RT35 — RitchieSpecs. Observed 2026-09-24.
Used-market listings	Used-market listings: MachineryTrader listings for Terex A300 — MachineryTrader. Observed 2026-09-24.
Federal agency data	Federal agency data: Recall database search for Terex — U.S. Consumer Product Safety Commission. Observed 2026-09-24.

Terex A300 to RT440B: Configuration records

A300

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	8.0 m retracted BOOM LENGTH,not minimum hook height [source]
Boom Head Height — A head/tip dimension,not the usable height beneath the hook.	26.0 m BOOM HEAD HEIGHT,not extended boom length [source]
Min Operating Radius	9.85 ft
Max Elevating Angle	78 degrees
Max Operating Radius	78.75 ft
Max Lift Capacity	66,139 lb
Number Of Sections	4 rectangular boom elements [source]
Dimensions and weight
Transport Length	31.62 ft
Transport Width	8.21 ft
Transport Height	11.16 ft
Ground Clearance	1.19 ft
Width W/ Outriggers Extended	18.05 ft
Carrier/Base Length	19.26 ft
Upper Structure Tail Swing Radius	10.24 ft
Wheelbase	3200 mm,calculated from1765+1435mm axle-centre dimensions [source]
Engine
Engine Model	IVECO F4GE9684D*J601 [source]
Maximum Engine Output (Manufacturer) — Manufacturer does not identify a gross rating standard.	107 kW maximum engine output,manufacturer standard unspecified [source]
Power Measured @	2,300 rpm
Max Torque	457.3 lb-ft
Torque Measured @	1,300 rpm
Displacement	415 cu in
Aspiration	Turbo supercharged
Operational
Fuel Capacity	63.5 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	14R24
Operating Weight	24.1 t,standard14.00R24 tires;no auxiliary winch or extensions [source]
Transmission and speeds
Transmission Type	DANA series20000 powershift with torque converter [source]
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	22.4 mph

Source

A350

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	8.8 m retracted BOOM LENGTH,not minimum hook height [source]
Boom Head Height — A head/tip dimension,not the usable height beneath the hook.	30.2 m BOOM HEAD HEIGHT,not extended boom length [source]
Min Operating Radius	9.85 ft
Max Elevating Angle	78 degrees
Max Operating Radius	82.03 ft
Max Lift Capacity	66,139 lb
Number Of Sections	4 rectangular boom elements [source]
Dimensions and weight
Transport Length	34.78 ft
Transport Width	8.37 ft
Transport Height	11.09 ft
Ground Clearance	1.05 ft
Width W/ Outriggers Extended	19.13 ft
Carrier/Base Length	20.81 ft
Upper Structure Tail Swing Radius	10.98 ft
Wheelbase	3200 mm,calculated from1435+1765mm axle-centre dimensions [source]
Engine
Engine Model	F4GE9684D*J601
Maximum Engine Output (Manufacturer) — Manufacturer does not identify a gross rating standard.	107 kW maximum engine output,manufacturer standard unspecified [source]
Power Measured @	2,300 rpm
Max Torque	620 N-m at1300rpm,original manufacturer schedule [source]
Torque Measured @	1,300 rpm
Displacement	415 cu in
Aspiration	Turbo supercharger
Operational
Fuel Capacity	63.5 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	14R24
Operating Weight	25.5 t,standard14.00R24 tires;no auxiliary winch or extensions [source]
Transmission and speeds
Transmission Type	DANA series 20000
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	22.4 mph

Source

RC35

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	9.9 m retracted BOOM LENGTH,not minimum hook height [source]
Boom Head Height — A head/tip dimension,not the usable height beneath the hook.	33 m BOOM HEAD HEIGHT,not extended boom length [source]
Min Operating Radius	9.85 ft
Max Elevating Angle	78 degrees
Max Operating Radius	68.9 ft
Max Lift Capacity	77,162 lb
Number Of Sections	4 rectangular boom elements [source]
Dimensions and weight
Transport Length	38.55 ft
Transport Width	8.37 ft
Transport Height	11.13 ft
Ground Clearance	1.19 ft
Width W/ Outriggers Extended	19.13 ft
Carrier/Base Length	21.92 ft
Upper Structure Tail Swing Radius	11.91 ft
Wheelbase	3620 mm,calculated from1810+1810mm axle-centre dimensions [source]
Engine
Engine Model	QSB6.7
Maximum Engine Output (Manufacturer) — Manufacturer does not identify a gross rating standard.	119 kW maximum engine output,manufacturer standard unspecified [source]
Power Measured @	2,200 rpm
Max Torque	539.9 lb-ft
Torque Measured @	1,400 rpm
Aspiration	Turbo supercharged
Operational
Fuel Capacity	79.3 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	16R25
Operating Weight	27.7 t,standard16.00R25 tires;no auxiliary winch or extensions [source]
Transmission and speeds
Transmission Type	DANA series 20000: powershift with torque converter
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	21.2 mph

Source

RC40

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	9.1 m retracted BOOM LENGTH,2007 brochure [source]
Boom Head Height — A head/tip dimension,not the usable height beneath the hook.	29.5 m BOOM HEAD HEIGHT,not extended boom length [source]
Min Operating Radius	9.85 ft
Max Elevating Angle	78 degrees
Max Operating Radius	82.03 ft
Max Lift Capacity	92,594 lb
Number Of Sections	4 octagonal boom elements,2007 brochure [source]
Dimensions and weight
Transport Length	35.88 ft
Transport Width	8.37 ft
Transport Height	11.13 ft
Ground Clearance	1.19 ft
Width W/ Outriggers Extended	19.13 ft
Carrier/Base Length	21.92 ft
Upper Structure Tail Swing Radius	11.91 ft
Wheelbase	3620 mm,calculated from1810+1810mm axle-centre dimensions,2010drawing [source] [source]
Engine
Engine Model	QSB6.7
Maximum Engine Output (Manufacturer) — Manufacturer does not identify a gross rating standard.	119 kW maximum engine output,2007manufacturer standard unspecified [source]
Power Measured @	2,200 rpm
Max Torque	539.9 lb-ft
Torque Measured @	1,400 rpm
Displacement	408.9 cu in
Aspiration	Turbo supercharged
Operational
Fuel Capacity	79.3 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	16R25
Operating Weight	27.5 t,2007standard16.00R25 tires,no auxiliary winch or extensions;2010edition separately lists27700kg without hook block [source]
Transmission and speeds
Transmission Type	DANA series 20000: powershift with torque converter
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	21.2 mph

Source

RC45

Specification	Source figure
Boom
Min Height @ Max Raise Angle	31.17 ft
Max Height @ Max Raise Angle - No Jib	122.71 ft
Min Operating Radius	8.21 ft
Max Elevating Angle	78 degrees
Max Operating Radius	104.99 ft
Max Lift Capacity	97,003 lb
Number Of Sections	6
Dimensions and weight
Transport Length	36.9 ft
Transport Width	8.37 ft
Transport Height	11.13 ft
Ground Clearance	1.19 ft
Width W/ Outriggers Extended	19.13 ft
Carrier/Base Length	21.92 ft
Upper Structure Tail Swing Radius	12.57 ft
Engine
Engine Model	QSB6.7
Max Torque	539.9 lb-ft
Displacement	408.9 cu in
Aspiration	turbo supercharged
Net Power	159.6 hp
Operational
Fuel Capacity	79.3 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	16R25
Transmission and speeds
Transmission Type	DANA series 20000
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	21.2 mph

Source

RT440B

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	31 ft /9.5 m retracted BOOM LENGTH,not minimum hook height [source]
Maximum Tip Height — A head/tip dimension,not the usable height beneath the hook.	128 ft /39 m maximum TIP HEIGHT,not working hook clearance [source]
Min Operating Radius	10 ft
Max Elevating Angle	78 degrees
Max Operating Radius	70 ft
Max Lift Capacity	80,000 lb
Number Of Sections	5
Dimensions and weight
Transport Length	36.9 ft
Width W/ Outriggers Extended	19.13 ft
Carrier/Base Length	22.62 ft
Upper Structure Tail Swing Radius	11.91 ft
Wheelbase	143 in /3.62 m,as printed in original technical sheet [source]
Engine
Engine Model	QSB6.7
Power Measured @	2,200 rpm
Max Torque	540 lb-ft
Torque Measured @	1,400 rpm
Displacement	408.9 cu in
Aspiration	turbocharged + aircooled
Rated Engine Output (Manufacturer) — No net standard identified in the original technical sheet.	160 hp /119 kW rated engine output;net standard not identified [source]
Operational
Operating Weight	61,290 lb
Fuel Capacity	79.3 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	20.5x25 PR
Hydraulic Reservoir Capacity — 420L tank quantity;not a complete hydraulic-system service fill.	420 L hydraulic RESERVOIR,printed92gal;not complete-system fill [source]
Transmission and speeds
Transmission Type	Range-shift powershift with integral torque converter,3+3forward/3+3reverse [source]
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	21.2 mph
Max Speed - Reverse	21.2 mph

Source

A400

Specification	Source figure
Boom
Retracted Boom Length — Original comparison heading incorrectly described a minimum height.	9.6 m retracted BOOM LENGTH,not minimum hook height [source]
Boom Head Height — A head/tip dimension,not the usable height beneath the hook.	31.6 m BOOM HEAD HEIGHT,not extended boom length [source]
Max Elevating Angle	78 degrees
Max Lift Capacity	77,162 lb
Number Of Sections	4
Dimensions and weight
Transport Length	37.24 ft
Transport Width	8.37 ft
Transport Height	11.32 ft
Wheelbase	137.8 in
Ground Clearance	1.19 ft
Width W/ Outriggers Extended	19.13 ft
Upper Structure Tail Swing Radius	11.26 ft
Engine
Engine Model	B5.9
Maximum Engine Output (Manufacturer) — Manufacturer does not identify a gross rating standard.	113 kW maximum engine output,manufacturer standard unspecified [source]
Power Measured @	2,500 rpm
Max Torque	452.9 lb-ft
Torque Measured @	1,500 rpm
Displacement	5.88 cubic decimeters (litres),original Cummins B5.9 installation [source]
Engine Make	CUMMINS
Operational
Operating Weight	60,848 lb
Fuel Capacity	63.5 gal
Operating Voltage	24 V
Alternator Supplied Amperage	70 amps
Tire Size	16.00 R 25
Hydraulic System Fluid Capacity	64.8 gal
Transmission and speeds
Transmission Type	DANA Series 20000
Number Of Forward Gears	6
Number Of Reverse Gears	6
Max Speed - Forward	21.2 mph

Source

RT35

Specification	Source figure
Boom
Min Height @ Max Raise Angle	29.86 ft
Max Height @ Max Raise Angle - No Jib	98.76 ft
Max Elevating Angle	78 degrees
Max Lift Capacity	77,162 lb
Number Of Sections	4
Dimensions and weight
Transport Length	35.66 ft
Transport Width	8.31 ft
Transport Height	10.96 ft
Wheelbase	125.99 in
Ground Clearance	1.84 ft
Width W/ Outriggers Extended	19.13 ft
Upper Structure Tail Swing Radius	11.02 ft
Engine
Engine Model	QSB4.5
Gross Power	139.5 hp
Power Measured @	2,000 rpm
Max Torque	371.8 lb-ft
Torque Measured @	1,800 rpm
Engine Make	Cummins
Operational
Fuel Capacity	63.5 gal
Tire Size	14.00 R 24
Hydraulic System Fluid Capacity	103.1 gal

Source

Compare Terex A300, A350, RC35, RC40, RC45, RT440B, A400, RT35

Boom
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Min Height @ Max Raise Angle	8.0 m retracted BOOM LENGTH,not minimum hook height [source]	8.8 m retracted BOOM LENGTH,not minimum hook height [source]	9.9 m retracted BOOM LENGTH,not minimum hook height [source]	9.1 m retracted BOOM LENGTH,2007 brochure [source]	31.17 ft	31 ft /9.5 m retracted BOOM LENGTH,not minimum hook height [source]	9.6 m retracted BOOM LENGTH,not minimum hook height [source]	29.86 ft
Max Height @ Max Raise Angle - No Jib	26.0 m BOOM HEAD HEIGHT,not extended boom length [source]	30.2 m BOOM HEAD HEIGHT,not extended boom length [source]	33 m BOOM HEAD HEIGHT,not extended boom length [source]	29.5 m BOOM HEAD HEIGHT,not extended boom length [source]	122.71 ft	128 ft /39 m maximum TIP HEIGHT,not working hook clearance [source]	31.6 m BOOM HEAD HEIGHT,not extended boom length [source]	98.76 ft
Max Elevating Angle	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees	78 degrees
Max Lift Capacity	66,139 lb	66,139 lb	77,162 lb	92,594 lb	97,003 lb	80,000 lb	77,162 lb	77,162 lb
Number Of Sections	4 rectangular boom elements [source]	4 rectangular boom elements [source]	4 rectangular boom elements [source]	4 octagonal boom elements,2007 brochure [source]	6	5	4	4

Dimensions and weight
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Transport Length	31.62 ft	34.78 ft	38.55 ft	35.88 ft	36.9 ft	36.9 ft	37.24 ft	35.66 ft
Width W/ Outriggers Extended	18.05 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft	19.13 ft
Upper Structure Tail Swing Radius	10.24 ft	10.98 ft	11.91 ft	11.91 ft	12.57 ft	11.91 ft	11.26 ft	11.02 ft

Engine
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Engine Model	IVECO F4GE9684D*J601 [source]	F4GE9684D*J601	QSB6.7	QSB6.7	QSB6.7	QSB6.7	B5.9	QSB4.5
Max Torque	457.3 lb-ft	620 N-m at1300rpm,original manufacturer schedule [source]	539.9 lb-ft	539.9 lb-ft	539.9 lb-ft	540 lb-ft	452.9 lb-ft	371.8 lb-ft

Operational
Specification	A300	A350	RC35	RC40	RC45	RT440B	A400	RT35
Fuel Capacity	63.5 gal	63.5 gal	79.3 gal	79.3 gal	79.3 gal	79.3 gal	63.5 gal	63.5 gal
Tire Size	14R24	14R24	16R25	16R25	16R25	20.5x25 PR	16.00 R 25	14.00 R 24

More in Terex: A600, RT45–RT670-1, AT-15/9 related models.

Terex A300 to RT440B specifications

The A300's last boom element has a different setting procedure

A350 hydraulic extension differs from the A300 arrangement

RC35 and RC40: maximum load and reach favor different questions

The A400 uses a different engine family

The RT440B's section sequence and support position

Terex A300 to RT440B: rough terrain crane

A300 to RT440B: forum references

Sources for this page

Terex A300 to RT440B: Configuration records