Machine models
Cat 924Gz, 928G, and 928Gz specifications
| Listing-entry count |
|---|
| 3 |
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| Cat | 924Gz, 928G, and 928Gz | 3 | 924Gz, 928G, and 928Gz |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Dump Clearance At Max Raise | 9.06 ft | 9.45 ft | 9.45 ft |
| Bucket Capacity - Heaped | 1.97 yd3 | 2.23 yd3 | 2.62 yd3 |
| Breakout Force | 21,727 lb | 25,849 lb | _ - |
| Bucket Width | 8.37 ft | 8.37 ft | 8.37 ft |
| Specification | 928Gz |
|---|---|
| Bucket Capacity - Struck | 2.23 yd3 |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Ground Clearance | 1.2 ft | 1.4 ft | 1.4 ft |
| Length With Bucket On Ground | 23.07 ft | 23.81 ft | 23.8 ft |
| Width Over Tires | 7.73 ft | 8.01 ft | 8.22 ft |
| Height To Top Of Cab | 10.6 ft | 10.73 ft | 10.73 ft |
| Reach At Max Lift And Dump | 2.84 ft | 3.05 ft | 9.45 ft |
| Carry Height | 1.2 ft | 3 ft | 3 ft |
| Height - Center Of Axle | 2.1 ft | 2.3 ft | 2.3 ft |
| Height - Top Of Exhaust Stack | 10.4 ft | 10.6 ft | 10.6 ft |
| Height - Top Of Hood | 85.2 in | 87.6 in | 87.6 in |
| Height - Top Of ROPS/FOPS | 10.5 ft | 10.8 ft | 10.8 ft |
| Length - Rear Axle To Bumper | 6.4 ft | 6.4 ft | 6.4 ft |
| Bucket Pin Height - Maximum Lift | 12.1 ft | 12.4 ft | 12.4 ft |
| Overall Height | 15.7 ft | 16.4 ft | 16.4 ft |
| Overall Height - Bucket Raised | 15.7 ft | 16.4 ft | 16.4 ft |
| Overall Length | 23.1 ft | 23.1 ft | 23.1 ft |
| Rack Back Angle - Carry | 48 degrees | 47.8 degrees | 47.8 degrees |
| Rack Back Angle - Ground | 44 degrees | 44 degrees | 44 degrees |
| Rack Back Angle - Maximum Lift | 58 degrees | 58 degrees | 58 degrees |
| Reach At Maximum Lift And 45 Degrees Dump | 2.1 ft | 3 ft | 3 ft |
| Wheel Base | 9.19 ft | 9.6 ft | 9.6 ft |
| Wheel Base Length | 9.2 ft | 9.6 ft | 9.6 ft |
| Width - Over Tires | 7.9 ft | 77 ft | 6.4 ft |
| Digging Depth | 4 in | 3.4 in | 3.4 in |
| Bucket Clearance-Maximum Lift/Carry | 11.1 ft | 12.4 ft | 12.4 ft |
| Dump Angle At Maximum Lift | 45 degrees | 45 degrees | 45 degrees |
| Centerline Of Front Axle To Hitch | 4.7 ft | 4.91 ft | 4.91 ft |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.1 ft | 9.5 ft | 9.5 ft |
| Specification | 924Gz | 928Gz |
|---|---|---|
| Wheelbase | 9.19 ft | 9.52 ft |
| Hinge Pin - Max Height | 12.34 ft | 12.71 ft |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Engine Model | 3056T | 3116T | 3056E DIT ATAAC |
| Net Power | 130 hp | 125 hp | 144.9 hp |
| Displacement | 366 cu in | 366 cu in | 366 cu in |
| Bore | 4 in | 4 in | 4 in |
| Stroke | 5 in | 5 in | 5 in |
| Rated Net Power | 129 hp | 143 hp | 143 hp |
| SAE J1349 (2) | 137 hp | 155 hp | 155 hp |
| ISO 9249 (1997) (2) | 138 hp | 156 hp | 156 hp |
| Eec 80/1269 (2) | 138 hp | 156 hp | 156 hp |
| SAE J1349 (1) | 129 hp | 143 hp | 143 hp |
| ISO 9249 (1997) (1) | 130 hp | 145 hp | 145 hp |
| Eec 80/1269 (1) | 130 hp | 145 hp | 145 hp |
| Specification | 924Gz | 928Gz |
|---|---|---|
| Gross Power | 138 hp | 156.9 hp |
| Power Measured @ | 2,300 rpm | 2,300 rpm |
| Specification | 928G | 928Gz |
|---|---|---|
| Maximum Net Power - 2000 Rpm | 155 hp | 155 hp |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Operating Weight | 23,920 lb | 25,699 lb | 27,135 lb |
| Fuel Capacity | 59.5 gal | 60.8 gal | 59.5 gal |
| Hydraulic System Fluid Capacity | 33.1 gal | 33.1 gal | 33.1 gal |
| Specification | 924Gz | 928Gz |
|---|---|---|
| Engine Oil Fluid Capacity | 5.3 gal | 4.3 gal |
| Cooling System Fluid Capacity | 10.6 gal | 11.1 gal |
| Transmission Fluid Capacity | 6.1 gal | 9.2 gal |
| Front Axle/Diff Fluid Capacity | 5.6 gal | 6.9 gal |
| Rear Axle/Diff Fluid Capacity | 5.6 gal | 6.7 gal |
| Turning Radius | 16.7 ft | 17.2 ft |
| Specification | 928G | 928Gz |
|---|---|---|
| Static Tipping Weight | 20,351 lb | 21,735 lb |
| Specification | 928Gz |
|---|---|
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
| Rear Axle Oscillation | 11 degrees |
| Tire Size | 20.5-25 R25 |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Number Of Forward Gears | 4 | 4 | 4 |
| Number Of Reverse Gears | 3 | 3 | 3 |
| Max Speed - Forward | 24.3 mph | 22.9 mph | 23.7 mph |
| Max Speed - Reverse | 13.5 mph | 15.3 mph | 16.2 mph |
| Specification | 924Gz |
|---|---|
| Forward - 1 (1) | 4.2 mph |
| Reverse - 1 (1) | 4.2 mph |
| Forward - 1 (2) | 2.3 mph |
| 2 (2) | 4.7 mph |
| 3 (2) | 12.2 mph |
| 4 (2) | 24.2 mph |
| Reverse - 1 (2) | 2.5 mph |
| 2 (3) | 5 mph |
| 3 (3) | 13.2 mph |
| 2 (1) | 7.6 mph |
| 3 (1) | 13.5 mph |
| 4 (1) | 23.9 mph |
| Specification | 928G | 928Gz |
|---|---|---|
| Forward - 1 | 4.9 mph | 4.9 mph |
| Reverse - 1 | 4.9 mph | 4.9 mph |
| Specification | 928Gz |
|---|---|
| Transmission Type | countershaft |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Steering Angle - Each Direction | 40 degrees | 40 degrees | 40 degrees |
| Minimum Turning Radius - Over Tires | 200 in | 206 in | 206 in |
| Steering Cylinder, Two, Bore | 2.8 in | 2.8 in | 2.8 in |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27.7 gpm | 27 gpm | 27 gpm |
| Maximum Working Pressure | 3,000 psi | 3,000 psi | 3,000 psi |
| Specification | 928Gz |
|---|---|
| Steering Articulation | 40 degrees |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Operating Weight | 23,920 lb | 27,140 lb | 27,140 lb |
| Specification | 928Gz |
|---|---|
| Optional Counterweight | 654.8 lb |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Tread Width | 6.2 ft | 96 ft | 96 ft |
| Size | 17.5-25PR (L-2) | 17.5-25PR (L-2) | 17.5-25PR (L-2) |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Bucket Capacities | 1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3 | 1.9 m3 - 2.3 m3 2.5 yd3 - 3.0 yd3 | 2.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd3 |
| Specification | 928Gz |
|---|---|
| Bucket Width | 8.4 ft |
| Capacity - Reference Bucket | 2.7 yd3 |
| Type - Reference Bucket | GP |
| Breakout Force - Reference Bucket | 25,844 lb |
| Specification | 924Gz | 928Gz |
|---|---|---|
| Relief Valve Setting | 3,757 psi | 3,597 psi |
| Pump Flow Capacity | 40.2 gpm | 40.2 gpm |
| Pump Type | load sensing hydraulic | fixed displacement vane-type implement pump |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Raise Time | 5.5 sec | 6.1 sec | 6.1 sec |
| Dump Time | 1.2 sec | 1.2 sec | 1.2 sec |
| Lower Time | 2.7 sec | 2.8 sec | 2.8 sec |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Axle Oscillation | 12 degrees | 11 degrees | 11 degrees |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Static Tipping Load - Full Turn | 15,163 lb | 18,018 lb | 18,931 lb |
| Breakout Force | 21,727 lb | 25,849 lb | 25,844 lb |
| Articulation Angle | 40 degrees | 40 degrees | 40 degrees |
| Reach - Full Lift And 45 Degrees Dump | 2.1 ft | 3 ft | 3 ft |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.1 ft | 9.5 ft | 9.5 ft |
| Specification | 924Gz |
|---|---|
| Bucket Capacity - With Bolt-On Cutting Edge | 2 yd3 |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Cooling System | 10.9 gal | 11.1 gal | 11.1 gal |
| Fuel Tank | 59.4 gal | 59.4 gal | 59.4 gal |
| Crankcase | 4.2 gal | 4.2 gal | 3.7 gal |
| Hydraulic Tank | 18.5 gal | 18.5 gal | 18.5 gal |
| Hydraulic System - Including Tank | 33 gal | 33 gal | 33 gal |
| Transmission | 6.1 gal | 9.1 gal | 9.1 gal |
| Front | 5.5 gal | 6.9 gal | 6.9 gal |
| Rear | 5.5 gal | 6.6 gal | 6.6 gal |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| ROPS | SAE J1040 MAY94, ISO 3471-1994 | SAE J1040 MAY94, ISO 3471-1994 | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II | SAE J231 JAN81, ISO 3449-1992 Level II | SAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II |
| Specification | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Pump Flow - Implement Pump | 40.15 gpm | 40.15 gpm | 40.15 gpm |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf) | 39.5 gpm | 40.3 gpm | 40.3 gpm |
| Raise | 5.2 s | 6.1 s | 6.1 s |
| Dump | 1.1 s | 1.2 s | 1.2 s |
| Lower, Empty, Float Down | 2.7 s | 2.8 s | 2.8 s |
| Total | 9 s | 10.1 s | 10.1 s |
| Bore (1) | 4.3 in | 4.8 in | 4.8 in |
| Stroke (1) | 29.7 in | 27 in | 27 in |
| Bore (2) | 4.8 in | 5 in | 5 in |
| Stroke (2) | 20.5 in | 21.7 in | 21.7 in |
| Specification | 924Gz |
|---|---|
| Maximum Working Pressure | 3,755 psi |
| Specification | 928G | 928Gz |
|---|---|---|
| Relief Valve Setting | 3,600 psi | 3,600 psi |
| Hydraulic Cycle Time | 10.1 s | 10.1 s |
| Source guide | Differing-field count reported |
|---|---|
| 924Gz, 928G, and 928Gz | 110 |
| Figure | 924Gz | 928G | 928Gz |
|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 5.4 | 4.9 | 5.3 |
| Fuel tank per engine horsepower | 0.46 gal | 0.49 gal | 0.41 gal |
| Figure | 924Gz | 928Gz |
|---|---|---|
| Pump flow per engine horsepower | 0.31 gpm | 0.28 gpm |
924Gz, 928G, and 928Gz: owner reports
Related account: “Transmission and parking brake”: 924F.
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | wheel loader | Cat and the 928 line that the 924Gz, 928G, 928Gz belongs to (no title names the exact model). That is too few titles to say what owners mostly ask about, so the most recent are listed instead | 19 |
- CAT 928g Smokes Alot (Heavy Equipment Forums, 2026-01-18)
- CAT 924gz Transmission Issues (Heavy Equipment Forums, 2026-01-06)
- CAT 928g Steering Column Question (Heavy Equipment Forums, 2024-12-11)
- Caterpillar 928g Wheel Loader Loss Of Power (Heavy Equipment Forums, 2024-06-08)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | Cat wheel loader | 37 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| 924Gz | 4 | 2003 to 2008 | $22,183 | $34,000 | $25,000 | None shown |
| 928G | 27 | 1997 to 2006 | $10,000 | $64,900 | $38,500 | 15,729 |
| 928Gz | 6 | 2005 to 2007 | $33,000 | $59,900 | $42,597 | 6,333 |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | Cat together with the wheel loader 924Gz, 928G, 928Gz | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Used-market listings |
|
| Federal agency data |
|
| Observation field | Recorded value |
|---|---|
| Title count | 19 |
| Forum indexes | Heavy Equipment Forums |
| Search wording | the 924Gz, 928G, and 928Gz wheel loader |
| Latest title quoted by the reference | CAT 928g Smokes Alot |
Cat 924Gz, 928G, and 928Gz: Configuration records
924Gz
| Specification | Source figure |
|---|---|
| Bucket | |
| Dump Clearance At Max Raise | 9.06 ft |
| Bucket Capacity - Heaped | 1.97 yd3 |
| Dimensions and weight | |
| Ground Clearance | 1.2 ft |
| Length With Bucket On Ground | 23.07 ft |
| Width Over Tires | 7.73 ft |
| Height To Top Of Cab | 10.6 ft |
| Wheelbase | 9.19 ft |
| Hinge Pin - Max Height | 12.34 ft |
| Reach At Max Lift And Dump | 2.84 ft |
| Carry Height | 1.2 ft |
| Height - Center Of Axle | 2.1 ft |
| Height - Top Of Exhaust Stack | 10.4 ft |
| Height - Top Of Hood | 85.2 in |
| Height - Top Of ROPS/FOPS | 10.5 ft |
| Length - Rear Axle To Bumper | 6.4 ft |
| Bucket Pin Height - Maximum Lift | 12.1 ft |
| Overall Height | 15.7 ft |
| Overall Height - Bucket Raised | 15.7 ft |
| Overall Length | 23.1 ft |
| Rack Back Angle - Carry | 48 degrees |
| Rack Back Angle - Ground | 44 degrees |
| Rack Back Angle - Maximum Lift | 58 degrees |
| Reach At Maximum Lift And 45 Degrees Dump | 2.1 ft |
| Wheel Base | 9.19 ft |
| Wheel Base Length | 9.2 ft |
| Width - Over Tires | 7.9 ft |
| Digging Depth | 4 in |
| Bucket Clearance-Maximum Lift/Carry | 11.1 ft |
| Dump Angle At Maximum Lift | 45 degrees |
| Centerline Of Front Axle To Hitch | 4.7 ft |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.1 ft |
| Engine | |
| Engine Model | 3056T |
| Net Power | 130 hp |
| Gross Power | 138 hp |
| Power Measured @ | 2,300 rpm |
| Displacement | 366 cu in |
| Bore | 4 in |
| Stroke | 5 in |
| Rated Net Power | 129 hp |
| SAE J1349 (2) | 137 hp |
| ISO 9249 (1997) (2) | 138 hp |
| Eec 80/1269 (2) | 138 hp |
| SAE J1349 (1) | 129 hp |
| ISO 9249 (1997) (1) | 130 hp |
| Eec 80/1269 (1) | 130 hp |
| Operational | |
| Fuel Capacity | 59.5 gal |
| Hydraulic System Fluid Capacity | 33.1 gal |
| Engine Oil Fluid Capacity | 5.3 gal |
| Cooling System Fluid Capacity | 10.6 gal |
| Transmission Fluid Capacity | 6.1 gal |
| Front Axle/Diff Fluid Capacity | 5.6 gal |
| Rear Axle/Diff Fluid Capacity | 5.6 gal |
| Turning Radius | 16.7 ft |
| Transmission and speeds | |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.3 mph |
| Max Speed - Reverse | 13.5 mph |
| Forward - 1 (1) | 4.2 mph |
| Reverse - 1 (1) | 4.2 mph |
| Forward - 1 (2) | 2.3 mph |
| Steering | |
| Steering Angle - Each Direction | 40 degrees |
| Minimum Turning Radius - Over Tires | 200 in |
| Steering Cylinder, Two, Bore | 2.8 in |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27.7 gpm |
| Tires | |
| Tread Width | 6.2 ft |
| Size | 17.5-25PR (L-2) |
| Buckets | |
| Bucket Capacities | 1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3 |
| Hydraulic System | |
| Pump Flow Capacity | 40.2 gpm |
| Raise Time | 5.5 sec |
| Dump Time | 1.2 sec |
| Lower Time | 2.7 sec |
| Pump Type | load sensing hydraulic |
| Axles | |
| Axle Oscillation | 12 degrees |
| Operating Specifications | |
| Static Tipping Load - Full Turn | 15,163 lb |
| Articulation Angle | 40 degrees |
| Reach - Full Lift And 45 Degrees Dump | 2.1 ft |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.1 ft |
| Bucket Capacity - With Bolt-On Cutting Edge | 2 yd3 |
| Service Refill Capacities | |
| Cooling System | 10.9 gal |
| Fuel Tank | 59.4 gal |
| Crankcase | 4.2 gal |
| Hydraulic Tank | 18.5 gal |
| Hydraulic System - Including Tank | 33 gal |
| Transmission | 6.1 gal |
| Front | 5.5 gal |
| Rear | 5.5 gal |
| Cab | |
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II |
| Loader Hydraulic System | |
| Pump Flow - Implement Pump | 40.15 gpm |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf) | 39.5 gpm |
| Raise | 5.2 s |
| Dump | 1.1 s |
| Lower, Empty, Float Down | 2.7 s |
| Total | 9 s |
| Bore (1) | 4.3 in |
| Stroke (1) | 29.7 in |
| Bore (2) | 4.8 in |
| Stroke (2) | 20.5 in |
| Additional specifications | |
| Breakout Force | 21,727 lb |
| Bucket Width | 8.37 ft |
| Operating Weight | 23,920 lb |
| Reverse - 1 (2) | 2.5 mph |
| Maximum Working Pressure | 3,000 psi |
| Relief Valve Setting | 3,757 psi |
928G
| Specification | Source figure |
|---|---|
| Bucket | |
| Dump Clearance At Max Raise | 9.45 ft |
| Bucket Capacity - Heaped | 2.23 yd3 |
| Dimensions and weight | |
| Ground Clearance | 1.4 ft |
| Length With Bucket On Ground | 23.81 ft |
| Width Over Tires | 8.01 ft |
| Height To Top Of Cab | 10.73 ft |
| Reach At Max Lift And Dump | 3.05 ft |
| Carry Height | 3 ft |
| Height - Center Of Axle | 2.3 ft |
| Height - Top Of Exhaust Stack | 10.6 ft |
| Height - Top Of Hood | 87.6 in |
| Height - Top Of ROPS/FOPS | 10.8 ft |
| Length - Rear Axle To Bumper | 6.4 ft |
| Bucket Pin Height - Maximum Lift | 12.4 ft |
| Overall Height | 16.4 ft |
| Overall Height - Bucket Raised | 16.4 ft |
| Overall Length | 23.1 ft |
| Rack Back Angle - Carry | 47.8 degrees |
| Rack Back Angle - Ground | 44 degrees |
| Rack Back Angle - Maximum Lift | 58 degrees |
| Reach At Maximum Lift And 45 Degrees Dump | 3 ft |
| Wheel Base | 9.6 ft |
| Wheel Base Length | 9.6 ft |
| Width - Over Tires | 77 ft |
| Digging Depth | 3.4 in |
| Bucket Clearance-Maximum Lift/Carry | 12.4 ft |
| Dump Angle At Maximum Lift | 45 degrees |
| Centerline Of Front Axle To Hitch | 4.91 ft |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.5 ft |
| Engine | |
| Engine Model | 3116T |
| Net Power | 125 hp |
| Displacement | 366 cu in |
| Bore | 4 in |
| Stroke | 5 in |
| Rated Net Power | 143 hp |
| SAE J1349 (2) | 155 hp |
| ISO 9249 (1997) (2) | 156 hp |
| Eec 80/1269 (2) | 156 hp |
| SAE J1349 (1) | 143 hp |
| ISO 9249 (1997) (1) | 145 hp |
| Eec 80/1269 (1) | 145 hp |
| Maximum Net Power - 2000 Rpm | 155 hp |
| Operational | |
| Fuel Capacity | 60.8 gal |
| Hydraulic System Fluid Capacity | 33.1 gal |
| Static Tipping Weight | 20,351 lb |
| Transmission and speeds | |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 22.9 mph |
| Max Speed - Reverse | 15.3 mph |
| Steering | |
| Steering Angle - Each Direction | 40 degrees |
| Minimum Turning Radius - Over Tires | 206 in |
| Steering Cylinder, Two, Bore | 2.8 in |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27 gpm |
| Tires | |
| Tread Width | 96 ft |
| Size | 17.5-25PR (L-2) |
| Buckets | |
| Bucket Capacities | 1.9 m3 - 2.3 m3 2.5 yd3 - 3.0 yd3 |
| Hydraulic System | |
| Raise Time | 6.1 sec |
| Dump Time | 1.2 sec |
| Lower Time | 2.8 sec |
| Axles | |
| Axle Oscillation | 11 degrees |
| Operating Specifications | |
| Static Tipping Load - Full Turn | 18,018 lb |
| Articulation Angle | 40 degrees |
| Reach - Full Lift And 45 Degrees Dump | 3 ft |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.5 ft |
| Service Refill Capacities | |
| Cooling System | 11.1 gal |
| Fuel Tank | 59.4 gal |
| Crankcase | 4.2 gal |
| Hydraulic Tank | 18.5 gal |
| Hydraulic System - Including Tank | 33 gal |
| Transmission | 9.1 gal |
| Front | 6.9 gal |
| Rear | 6.6 gal |
| Cab | |
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II |
| Loader Hydraulic System | |
| Pump Flow - Implement Pump | 40.15 gpm |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf) | 40.3 gpm |
| Raise | 6.1 s |
| Dump | 1.2 s |
| Lower, Empty, Float Down | 2.8 s |
| Total | 10.1 s |
| Bore (1) | 4.8 in |
| Stroke (1) | 27 in |
| Bore (2) | 5 in |
| Stroke (2) | 21.7 in |
| Hydraulic Cycle Time | 10.1 s |
| Additional specifications | |
| Breakout Force | 25,849 lb |
| Bucket Width | 8.37 ft |
| Operating Weight | 25,699 lb |
| Forward - 1 | 4.9 mph |
| Reverse - 1 | 4.9 mph |
| Maximum Working Pressure | 3,000 psi |
| Relief Valve Setting | 3,600 psi |
928Gz
| Specification | Source figure |
|---|---|
| Bucket | |
| Dump Clearance At Max Raise | 9.45 ft |
| Bucket Capacity - Heaped | 2.62 yd3 |
| Bucket Capacity - Struck | 2.23 yd3 |
| Dimensions and weight | |
| Ground Clearance | 1.4 ft |
| Length With Bucket On Ground | 23.8 ft |
| Width Over Tires | 8.22 ft |
| Height To Top Of Cab | 10.73 ft |
| Wheelbase | 9.52 ft |
| Hinge Pin - Max Height | 12.71 ft |
| Reach At Max Lift And Dump | 9.45 ft |
| Carry Height | 3 ft |
| Height - Center Of Axle | 2.3 ft |
| Height - Top Of Exhaust Stack | 10.6 ft |
| Height - Top Of Hood | 87.6 in |
| Height - Top Of ROPS/FOPS | 10.8 ft |
| Length - Rear Axle To Bumper | 6.4 ft |
| Bucket Pin Height - Maximum Lift | 12.4 ft |
| Overall Height | 16.4 ft |
| Overall Height - Bucket Raised | 16.4 ft |
| Overall Length | 23.1 ft |
| Rack Back Angle - Carry | 47.8 degrees |
| Rack Back Angle - Ground | 44 degrees |
| Rack Back Angle - Maximum Lift | 58 degrees |
| Reach At Maximum Lift And 45 Degrees Dump | 3 ft |
| Wheel Base | 9.6 ft |
| Wheel Base Length | 9.6 ft |
| Width - Over Tires | 6.4 ft |
| Digging Depth | 3.4 in |
| Bucket Clearance-Maximum Lift/Carry | 12.4 ft |
| Dump Angle At Maximum Lift | 45 degrees |
| Centerline Of Front Axle To Hitch | 4.91 ft |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.5 ft |
| Engine | |
| Engine Model | 3056E DIT ATAAC |
| Net Power | 144.9 hp |
| Gross Power | 156.9 hp |
| Power Measured @ | 2,300 rpm |
| Displacement | 366 cu in |
| Bore | 4 in |
| Stroke | 5 in |
| Rated Net Power | 143 hp |
| SAE J1349 (2) | 155 hp |
| ISO 9249 (1997) (2) | 156 hp |
| Eec 80/1269 (2) | 156 hp |
| SAE J1349 (1) | 143 hp |
| ISO 9249 (1997) (1) | 145 hp |
| Eec 80/1269 (1) | 145 hp |
| Maximum Net Power - 2000 Rpm | 155 hp |
| Operational | |
| Fuel Capacity | 59.5 gal |
| Hydraulic System Fluid Capacity | 33.1 gal |
| Engine Oil Fluid Capacity | 4.3 gal |
| Cooling System Fluid Capacity | 11.1 gal |
| Transmission Fluid Capacity | 9.2 gal |
| Front Axle/Diff Fluid Capacity | 6.9 gal |
| Rear Axle/Diff Fluid Capacity | 6.7 gal |
| Turning Radius | 17.2 ft |
| Static Tipping Weight | 21,735 lb |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
| Rear Axle Oscillation | 11 degrees |
| Tire Size | 20.5-25 R25 |
| Transmission and speeds | |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 23.7 mph |
| Max Speed - Reverse | 16.2 mph |
| Steering | |
| Steering Angle - Each Direction | 40 degrees |
| Minimum Turning Radius - Over Tires | 206 in |
| Steering Cylinder, Two, Bore | 2.8 in |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27 gpm |
| Steering Articulation | 40 degrees |
| Weights | |
| Optional Counterweight | 654.8 lb |
| Tires | |
| Tread Width | 96 ft |
| Size | 17.5-25PR (L-2) |
| Buckets | |
| Bucket Capacities | 2.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd3 |
| Capacity - Reference Bucket | 2.7 yd3 |
| Type - Reference Bucket | GP |
| Breakout Force - Reference Bucket | 25,844 lb |
| Hydraulic System | |
| Pump Flow Capacity | 40.2 gpm |
| Raise Time | 6.1 sec |
| Dump Time | 1.2 sec |
| Lower Time | 2.8 sec |
| Pump Type | fixed displacement vane-type implement pump |
| Axles | |
| Axle Oscillation | 11 degrees |
| Operating Specifications | |
| Static Tipping Load - Full Turn | 18,931 lb |
| Articulation Angle | 40 degrees |
| Reach - Full Lift And 45 Degrees Dump | 3 ft |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.5 ft |
| Service Refill Capacities | |
| Cooling System | 11.1 gal |
| Fuel Tank | 59.4 gal |
| Crankcase | 3.7 gal |
| Hydraulic Tank | 18.5 gal |
| Hydraulic System - Including Tank | 33 gal |
| Transmission | 9.1 gal |
| Front | 6.9 gal |
| Rear | 6.6 gal |
| Cab | |
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II |
| Loader Hydraulic System | |
| Pump Flow - Implement Pump | 40.15 gpm |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf) | 40.3 gpm |
| Raise | 6.1 s |
| Dump | 1.2 s |
| Lower, Empty, Float Down | 2.8 s |
| Total | 10.1 s |
| Bore (1) | 4.8 in |
| Stroke (1) | 27 in |
| Bore (2) | 5 in |
| Stroke (2) | 21.7 in |
| Hydraulic Cycle Time | 10.1 s |
| Additional specifications | |
| Bucket Width | 8.37 ft |
| Operating Weight | 27,135 lb |
| Forward - 1 | 4.9 mph |
| Reverse - 1 | 4.9 mph |
| Transmission Type | countershaft |
| Maximum Working Pressure | 3,000 psi |
| Relief Valve Setting | 3,597 psi |
More in Cat: 924Hz/928Hz, 924K / 930K / 938K: engine editions/hydraulics, 926/930/938.