FieldSpec
Equipment menu

Machine models

Cat 924Hz and 928Hz specifications

Entries in this reference
Listing-entry count
2
Short answer

Cat 924Hz and 928Hz: wheel loaders.

Selected configuration figures
ConfigurationDocumented field and quantity
924Hz
Rated Net Power
128 hp
Operating Weight
24,180 lb
928Hz
Rated Net Power
149 hp
Operating Weight
27,699 lb
924Hz and 928Hz specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
Cat924Hz and 928Hz2924Hz and 928Hz
Dimensions and weight
Specification924Hz928Hz
Ground Clearance1.43 ft1.34 ft
Bucket Pin Height - Maximum Lift12.33 ft12.7 ft
Carry Height1.43 ft1.47 ft
Centerline Of Front Axle To Hitch4.59 ft4.76 ft
Digging Depth1.65 in3.39 in
Dump Clearance At Maximum Lift - 45 Degrees9.28 ft9.45 ft
Height - Center Of Axle2.27 ft2.25 ft
Height - Top Of Exhaust Stack10.53 ft10.46 ft
Height - Top Of Hood87.36 in86.52 in
Height - Top Of ROPS/FOPS10.59 ft10.73 ft
Length - Rear Axle To Bumper6.44 ft6.3 ft
Overall Height - Bucket Raised15.78 ft16.31 ft
Overall Length22.63 ft23.79 ft
Reach At Maximum Lift And 45 Degrees Dump2.6 ft3.04 ft
Bucket Clearance-Maximum Lift/Carry11.26 ft12.31 ft
Wheel Base9.19 ft9.51 ft
Specification928Hz
Dump Angle At Maximum Lift45 degrees
Rack Back Angle - Carry47.8 degrees
Rack Back Angle - Ground44 degrees
Rack Back Angle - Maximum Lift60 degrees
Width - Over Tires8.43 ft
Engine
Specification924Hz928Hz
Displacement403 cu in403 cu in
Net Torque482 lb-ft536 lb-ft
Peak Torque496 lb-ft547 lb-ft
Bore4.2 in4.2 in
Stroke5 in5 in
Rated Net Power128 hp149 hp
SAE J1349 (2)138 hp160 hp
ISO 9249 (1997) (2)139 hp161 hp
Eec 80/1269 (2)139 hp161 hp
SAE J1349 (1)128 hp149 hp
ISO 9249 (1997) (1)130 hp150 hp
Eec 80/1269 (1)130 hp150 hp
Specification924Hz
Maximum Net Power - 1800 Rpm138 hp
Specification928Hz
Maximum Net Power - 2000 Rpm160 hp
Operational
Specification924Hz928Hz
Operating Weight24,180 lb27,699 lb
Steering
Specification924Hz928Hz
Steering Angle - Each Direction40 degrees40 degrees
Minimum Turning Radius - Over Tires200 in206 in
Steering Cylinder, Two, Bore2.8 in2.8 in
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gpm27 gpm
Maximum Working Pressure3,000 psi3,000 psi
Steering Articulation40 degrees40 degrees
Transmission and speeds
Specification924Hz
Forward - 1 (1)4.2 mph
Reverse - 1 (1)4.2 mph
Forward - 1 (2)2.3 mph
2 (2)4.7 mph
3 (2)12.2 mph
4 (2)24.2 mph
Reverse - 1 (2)2.5 mph
2 (3)5 mph
3 (3)13.2 mph
2 (1)7.6 mph
3 (1)13.5 mph
4 (1)23.9 mph
Optional Low Speed Transmission Maximum Travel Speeds24.2 mph
Specification924Hz928Hz
Standard Transmission Maximum Travel Speeds23.9 mph23.4 mph
Specification928Hz
Forward - 14.9 mph
Reverse - 14.9 mph
Tires
Specification924Hz928Hz
Tread Width6.2 ft8.5 ft
Size20.5 R25 Radial (L-3)20.5 R25 L3 XHA
Buckets
Specification924Hz928Hz
Bucket Capacities1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd32.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd3
Operating Specifications
Specification924Hz928Hz
Static Tipping Load - Full Turn16,844 lb19,089 lb
Articulation Angle40 degrees40 degrees
Reach - Full Lift And 45 Degrees Dump2.6 ft3 ft
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.3 ft9.5 ft
Service Refill Capacities
Specification924Hz928Hz
Cooling System8.5 gal11.1 gal
Fuel Tank59.4 gal59.4 gal
Crankcase4.4 gal4 gal
Hydraulic Tank18.5 gal18.5 gal
Hydraulic System - Including Tank33 gal33 gal
Transmission6.1 gal9.1 gal
Front5.5 gal6.9 gal
Rear5.5 gal6.6 gal
Cab
Specification924Hz928Hz
ROPSSAE J1040 MAY94, ISO 3471-1994SAE J1040 MAY94, ISO 3471-1994
FOPSSAE J231 JAN81, ISO 3449-1992 Level IISAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II
Loader Hydraulic System
Specification924Hz928Hz
Pump Flow - Implement Pump40.15 gpm40.2 gpm
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf)39.5 gpm40.3 gpm
Maximum Working Pressure3,755 psi3,755 psi
Raise5.2 s6.1 s
Dump1.1 s1.2 s
Lower, Empty, Float Down2.7 s2.8 s
Total9 s10.1 s
Bore (1)4.3 in4.8 in
Stroke (1)29.7 in27 in
Bore (2)4.8 in5 in
Stroke (2)20.5 in21.7 in
Hydraulic Cycle Time9 Seconds10.1 Seconds
Relief Pressure - Implement Pump3,755 psi3,755 psi
Variants — Source comparison annotation
Source guideDiffering-field count reported
924Hz and 928Hz73

924Hz and 928Hz: owner reports

Related account: “Transmission and parking brake”: 924F.

924Hz and 928Hz: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumswheel loaderCat and the 924 line that the 924Hz, 928Hz belongs to (no title names the exact model)12
Topics named by those titles
Title topicTitles
transmission and drive3
electrical and sensors2
Topic in the titleThreadsShare of matching threads
transmission and drive325%
electrical and sensors217%
Used market for the 924Hz and 928Hz — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderCat wheel loader4
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
928Hz42008 to 2011$39,900$74,900$64,750None shown
924Hz and 928Hz: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionCat together with the wheel loader 924Hz, 928HzNo matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
  • Reference site: Cat 924Hz — RitchieSpecs. Observed 2026-09-24.
Reference site
  • Reference site: Cat 928Hz — RitchieSpecs. Observed 2026-09-24.
Forum threads
Used-market listings
Federal agency data

Cat 924Hz and 928Hz: Configuration records

924Hz
SpecificationSource figure
Dimensions and weight
Ground Clearance1.43 ft
Bucket Pin Height - Maximum Lift12.33 ft
Carry Height1.43 ft
Centerline Of Front Axle To Hitch4.59 ft
Digging Depth1.65 in
Dump Clearance At Maximum Lift - 45 Degrees9.28 ft
Height - Center Of Axle2.27 ft
Height - Top Of Exhaust Stack10.53 ft
Height - Top Of Hood87.36 in
Height - Top Of ROPS/FOPS10.59 ft
Length - Rear Axle To Bumper6.44 ft
Overall Height - Bucket Raised15.78 ft
Overall Length22.63 ft
Reach At Maximum Lift And 45 Degrees Dump2.6 ft
Bucket Clearance-Maximum Lift/Carry11.26 ft
Wheel Base9.19 ft
Engine
Displacement403 cu in
Net Torque482 lb-ft
Peak Torque496 lb-ft
Bore4.2 in
Stroke5 in
Rated Net Power128 hp
SAE J1349 (2)138 hp
ISO 9249 (1997) (2)139 hp
Eec 80/1269 (2)139 hp
SAE J1349 (1)128 hp
ISO 9249 (1997) (1)130 hp
Eec 80/1269 (1)130 hp
Maximum Net Power - 1800 Rpm138 hp
Operational
Operating Weight24,180 lb
Steering
Steering Angle - Each Direction40 degrees
Minimum Turning Radius - Over Tires200 in
Steering Cylinder, Two, Bore2.8 in
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gpm
Steering Articulation40 degrees
Transmission and speeds
Forward - 1 (1)4.2 mph
Reverse - 1 (1)4.2 mph
Forward - 1 (2)2.3 mph
Tires
Tread Width6.2 ft
Size20.5 R25 Radial (L-3)
Buckets
Bucket Capacities1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3
Operating Specifications
Static Tipping Load - Full Turn16,844 lb
Articulation Angle40 degrees
Reach - Full Lift And 45 Degrees Dump2.6 ft
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.3 ft
Service Refill Capacities
Cooling System8.5 gal
Fuel Tank59.4 gal
Crankcase4.4 gal
Hydraulic Tank18.5 gal
Hydraulic System - Including Tank33 gal
Transmission6.1 gal
Front5.5 gal
Rear5.5 gal
Cab
ROPSSAE J1040 MAY94, ISO 3471-1994
FOPSSAE J231 JAN81, ISO 3449-1992 Level II
Loader Hydraulic System
Pump Flow - Implement Pump40.15 gpm
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf)39.5 gpm
Raise5.2 s
Dump1.1 s
Lower, Empty, Float Down2.7 s
Total9 s
Bore (1)4.3 in
Stroke (1)29.7 in
Bore (2)4.8 in
Stroke (2)20.5 in
Hydraulic Cycle Time9 Seconds
Relief Pressure - Implement Pump3,755 psi
Additional specifications
Maximum Working Pressure3,000 psi
Reverse - 1 (2)2.5 mph
Standard Transmission Maximum Travel Speeds23.9 mph
Optional Low Speed Transmission Maximum Travel Speeds24.2 mph

Source

928Hz
SpecificationSource figure
Dimensions and weight
Ground Clearance1.34 ft
Bucket Pin Height - Maximum Lift12.7 ft
Carry Height1.47 ft
Centerline Of Front Axle To Hitch4.76 ft
Digging Depth3.39 in
Dump Clearance At Maximum Lift - 45 Degrees9.45 ft
Height - Center Of Axle2.25 ft
Height - Top Of Exhaust Stack10.46 ft
Height - Top Of Hood86.52 in
Height - Top Of ROPS/FOPS10.73 ft
Length - Rear Axle To Bumper6.3 ft
Overall Height - Bucket Raised16.31 ft
Overall Length23.79 ft
Reach At Maximum Lift And 45 Degrees Dump3.04 ft
Bucket Clearance-Maximum Lift/Carry12.31 ft
Wheel Base9.51 ft
Dump Angle At Maximum Lift45 degrees
Rack Back Angle - Carry47.8 degrees
Rack Back Angle - Ground44 degrees
Rack Back Angle - Maximum Lift60 degrees
Width - Over Tires8.43 ft
Engine
Displacement403 cu in
Net Torque536 lb-ft
Peak Torque547 lb-ft
Bore4.2 in
Stroke5 in
Rated Net Power149 hp
SAE J1349 (2)160 hp
ISO 9249 (1997) (2)161 hp
Eec 80/1269 (2)161 hp
SAE J1349 (1)149 hp
ISO 9249 (1997) (1)150 hp
Eec 80/1269 (1)150 hp
Maximum Net Power - 2000 Rpm160 hp
Operational
Operating Weight27,699 lb
Steering
Steering Angle - Each Direction40 degrees
Minimum Turning Radius - Over Tires206 in
Steering Cylinder, Two, Bore2.8 in
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)27 gpm
Steering Articulation40 degrees
Tires
Tread Width8.5 ft
Size20.5 R25 L3 XHA
Buckets
Bucket Capacities2.0 m3 - 2.3 m3 2.6 yd3 - 3.0 yd3
Operating Specifications
Static Tipping Load - Full Turn19,089 lb
Articulation Angle40 degrees
Reach - Full Lift And 45 Degrees Dump3 ft
Dump Clearance At Full Lift And 45 Degrees Dump Angle9.5 ft
Service Refill Capacities
Cooling System11.1 gal
Fuel Tank59.4 gal
Crankcase4 gal
Hydraulic Tank18.5 gal
Hydraulic System - Including Tank33 gal
Transmission9.1 gal
Front6.9 gal
Rear6.6 gal
Cab
ROPSSAE J1040 MAY94, ISO 3471-1994
FOPSSAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II
Loader Hydraulic System
Pump Flow - Implement Pump40.2 gpm
Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With SAE 10w Oil At 65 Degreesc (150 Degreesf)40.3 gpm
Raise6.1 s
Dump1.2 s
Lower, Empty, Float Down2.8 s
Total10.1 s
Bore (1)4.8 in
Stroke (1)27 in
Bore (2)5 in
Stroke (2)21.7 in
Hydraulic Cycle Time10.1 Seconds
Relief Pressure - Implement Pump3,755 psi
Additional specifications
Maximum Working Pressure3,000 psi
Standard Transmission Maximum Travel Speeds23.4 mph
Forward - 14.9 mph
Reverse - 14.9 mph

Source

More in Cat: 926/930/938, 924Gz/928G/928Gz, 926E/930R.