Machine models

Cat 926, 930, and 938 specifications

Hydrostatic modes change how these loaders respond

The suffix-free 926, 930 and 938 comparison concerns the newer hydrostatic loaders. Cat's launch description separates the selectable driving responses. Single-pedal mode is intended for hydraulic-tool and pick-and-place work, combining engine-speed lock with fine ground-speed control.

Hystat mode supplies stronger deceleration and engine braking. Torque-converter mode allows a smoother rollout, while Ice mode softens directional changes and extends coast-out. A mode named after a torque converter does not turn the hydrostatic transmission into an older powershift unit.

Front-axle locking also differs within the trio. The 926 and 930 allow an operator command through the joystick. Cat identifies automatic differential locking as a standard 938 feature, alongside manual control.

Auto wheel-torque control and differential locking are different functions; a reference to one does not establish that every model automatically operates the other.

Source: Cat next-generation loader launch release, operating modes and front-axle controls.

Choose a hydraulic function, then read its rating conditions

The family brochure separates the pumps serving drive, implements and steering. An auxiliary function's listed maximum is not the sum of those independent system ratings. Its hydraulic tables specify Performance mode for the published flow.

Cycle-time columns separately show Performance and Standard operation, so timing a loader in the lower-speed mode cannot directly verify the faster figure. Confirm the auxiliary-flow setting as well as the selected power mode when matching a hydraulic attachment.

Bucket dimensions need another configuration check. The brochure distinguishes pin-on, Fusion and ISO coupler columns and supplies high-lift adjustments. Those choices affect clearance and reach, so select the relevant bucket column before comparing it with the receiving vehicle.

The dimensional drawings also identify tire-dependent measurements. Mixing a high-lift clearance with the standard arrangement's load data produces a combination the drawing does not describe.

Source: Cat AEHQ8472-01, April 2026, hydraulics and bucket-configuration schedules.

Check the installed generation and weighing entitlement

The launch release described Payload weighing with a trial period. The April 2026 brochure instead describes included, subscription-free Payload. Verify the actual machine's equipment and entitlement before pricing a used loader on either assumption.

The older 926E, 930H and 938K owner accounts retained in the reference material concern different generations; their faults do not establish a recurring problem on these suffix-free models.

Sources: the Cat launch release and April 2026 family brochure linked above.

Earlier entries retained as rejected figures, with original manufacturer corrections
Model and field	Earlier entry	Corrected manufacturer value
926 Lift Cylinder: Standard Lift Linkage - Bore Diameter	1.3 in	4.3 in (110 mm); original Cat AEHQ8472-01
938 Cooling System	7.9 gal (US)	8.5 gal (US) (32 L); original Cat AEHQ8472-01
938 Transmission - Gear Box	2.2 gal (US)	2.9 gal (US) (11 L); original Cat AEHQ8472-01

938 complete hydraulic system versus tank alone
Compartment	Volume	Source
Complete system including tank	44.9 gal (US),170 L	Cat AEHQ8472-01, April2026
Tank alone	23.8 gal (US),90 L	Same manufacturer refill schedule

Entries in this reference
Listing-entry count
3

Short answer

The suffix-free Cat 926, 930 and 938 are hydrostatic wheel loaders with selectable driving responses. Their hydraulic ratings, front differential controls and bucket configurations differ. Compare the installed linkage, coupler and operating mode before selecting an attachment or applying a cycle-time figure; older E, H and K models are separate generations.

926, 930, and 938 specification matrix — Listing labels reported by the source
Publisher name	Source guide	Listing-entry count	Labels named by the source
Cat	926, 930, and 938	3	926, 930, and 938

Engine
Specification	926	930	938
Rated Gross Power - SAE J1995	170 hp	170 hp	191 hp
Engine Model	Cat C7.1*	Cat C7.1*	Cat C7.1*
Performance Mode	Automatic	Automatic	Automatic
Rated Gross Power - Rated Engine Speed	1800 r/min	1800 r/min	1800 r/min
Rated Gross Power - SAE J1995 (DIN)	172 mhp	172 mhp	194 mhp
Rated Engine Power - ISO 14396	168 hp	168 hp	188 hp
Rated Engine Power - ISO 14396 (DIN)	170 mhp	170 mhp	191 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed	165 hp	165 hp	185 hp
Rated Net Power - ISO 9249 at Minimum Fan Speed	165 hp	165 hp	185 hp
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed	167 mhp	167 mhp	188 mhp
Maximum Gross Torque - Engine Speed	1400 r/min	1400 r/min	1400 r/min
Displacement	427 in³	427 in³	427 in³
Bore	4 in	4 in	4 in
Stroke	5 in	5 in	5 in

Weights
Specification	926	930	938
Operating Weight	27,972 lb	31,124 lb	35,528 lb
Operating Weight - High Lift	28,767 lb	31,633 lb	36,210 lb

Buckets
Specification	926	930	938
Bucket Capacities	1.9-5 m3 (2.5-6.5 yd3)	1.9-5 m3 (2.5-6.5 yd3)	1.9-5 m3 (2.5-6.5 yd3)

Steering
Specification	926	930	938
Steering Cylinder - Bore Diameter	2.8 in	2.8 in	3.1 in
Steering Cylinder - Rod Diameter	1.6 in	1.6 in	2 in
Steering Cylinder - Stroke	17.2 in	17.2 in	15.7 in
Maximum Flow - Steering Pump	34 gpm	34 gpm	34 gpm
Maximum Working Pressure - Steering Pump	3,500 psi	3,500 psi	3,500 psi
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited	2.8 s	2.8 s	3.1 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed	2.4 s	2.4 s	2.3 s

Loader Hydraulic System
Specification	926	930	938
Maximum Flow - Implement Pump	40 gpm	50 gpm	50 gpm
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	40 gpm	50 gpm	50 gpm
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	40 gpm	42 gpm	42 gpm
Maximum Working Pressure - Implement Pump	3,771 psi	3,771 psi	4,061 psi
Relief Pressure - Tilt Cylinder	4,061 psi	4,061 psi	4,351 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3,771 psi	3,771 psi	4,061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4,061 psi	4,061 psi	4,351 psi
Lift Cylinder: Standard Lift Linkage - Bore Diameter	4.3 in (110 mm); original Cat AEHQ8472-01	4.7 in	4.7 in
Lift Cylinder: Standard Lift Linkage - Rod Diameter	2.4 in	2.6 in	2.6 in
Lift Cylinder: Standard Lift Linkage - Stroke	28.7 in	28.7 in	31.1 in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	5.5 in	5.9 in	5.9 in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	3 in	3.5 in	3.5 in
Tilt Cylinder: Standard Lift Linkage - Stroke	20.3 in	21.9 in	21.9 in
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.5 s	5.1 s	5.5 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)	1.5 s	1.5 s	1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	2.6 s	2.7 s	2.7 s
Hydraulic Cycle Time - Total Cycle Time	9.6 s	9.3 s	9.7 s

Service Refill Capacities
Specification	926	930	938
Fuel Tank	51.5 gal (US)	51.5 gal (US)	51.5 gal (US)
Cooling System	7.9 gal (US)	7.9 gal (US)	8.5 gal (US) (32 L); original Cat AEHQ8472-01
Engine Crankcase	5.3 gal (US)	5.3 gal (US)	5.3 gal (US)
Transmission - Gear Box	2.2 gal (US)	2.2 gal (US)	2.9 gal (US) (11 L); original Cat AEHQ8472-01
Front Axles	6.9 gal (US)	6.9 gal (US)	9.2 gal (US)
Rear Axles	6.6 gal (US)	6.6 gal (US)	9.2 gal (US)
Hydraulic Tank	23.8 gal (US)	23.8 gal (US)	23.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)	5 gal (US)	5 gal (US)

Specification	926	930
Hydraulic System - Including Tank	42.3 gal (US)	43.6 gal (US)

Transmission and speeds
Specification	926	930	938
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)	1-13 km/h (0.6-8 mph)	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2	8 mph	8 mph	8 mph
Forward and Reverse - Range 3	17 mph	17 mph	17 mph
Forward and Reverse - Range 4	25 mph	25 mph	25 mph

Tires
Specification	926	930	938
Standard Size	20.5 R25, radial (L-3)	20.5 R25, radial (L-3)	20.5 R25, radial (L-3)
Other Choices Include	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture

Cab
Specification	926	930	938
ROPS	ISO 3471:2008	ISO 3471:2008	ISO 3471:2008
FOPS	ISO 3449:2005 LEVEL II	ISO 3449:2005 LEVEL II	ISO 3449:2005 LEVEL II

Axles
Specification	926	930	938
Front	Fixed; Locking differential (standard)	Fixed; Locking differential (standard)	Fixed; Locking differential (standard)
Rear	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)

Air Conditioning System
Specification	926	930	938
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)

Sound
Specification	926	930	938
Operator Sound Pressure (ISO 6396:2008)	68 dB(A)	68 dB(A)	68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)	101 dB(A)	101 dB(A)

Sustainability
Specification	926	930	938
Recyclability	95%	95%	96%

Dimensions with Bucket Standard Lift
Specification	926	930	938
Height - Ground to Cab**	10.92 ft	10.92 ft	10.92 ft
Height - Ground to Beacon**	12.17 ft	12.17 ft	12.17 ft
Height - Ground to Axle Center**	2.25 ft	2.25 ft	2.25 ft
Height - Ground Clearance**	1.33 ft	1.33 ft	1.25 ft
Length - Overall*	24.25 ft	24.67 ft	25.08 ft
Length - Rear Axle to Bumper	6.42 ft	6.5 ft	6.42 ft
Length - Hitch to Front Axle	4.92 ft	4.92 ft	5 ft
Length - Wheel Base	9.83 ft	9.83 ft	10 ft
Clearance - Bucket at 45°*	9.42 ft	9.25 ft	9.3 ft
Clearance - Load over Height**	11 ft	10.9 ft	11 ft
Clearance - Level Bucket**	11.75 ft	11.75 ft	11.9 ft
Height - Bucket Pin**	12.83 ft	12.83 ft	13 ft
Height - Overall**	16.67 ft	16.9 ft	17.33 ft
Reach - Bucket at 45°*	3.08 ft	3.5 ft	3.75 ft
Carry Height - Bucket Pin	1.25 ft	1.25 ft	1.33 ft
Dig Depth**	3.9 in	3.9 in	4 in
Width - Bucket	8.33 ft	8.33 ft	9 ft
Width - Tread Center	6.33 ft	6.33 ft	6.83 ft
Turning Radius - Over Bucket	19.33 ft	19.5 ft	20.08 ft
Width - Over Tires	8.33 ft	8.33 ft	8.83 ft
Turning Radius - Outside of Tires	17.75 ft	17.75 ft	18.16 ft
Turning Radius - Inside of Tires	9.33 ft	9.33 ft	9.33 ft
Rack Angle at Full Lift	53 °	54 °	54 °
Dump Angle at Full Lift	50 °	49 °	49 °
Rack Angle at Carry	41 °	43 °	43 °
Departure Angle	33 °	33 °	33 °
Articulation Angle	40 °	40 °	40 °

Dimensions with Bucket High Lift
Specification	926	930	938
Length - Overall*	26.5 ft	27.3 ft	27.58 ft
Clearance - Bucket at 45°*	11.08 ft	11.25 ft	11.16 ft
Clearance - Load over Height**	11.67 ft	11.58 ft	11.66 ft
Clearance - Level Bucket**	13.33 ft	13.67 ft	13.83 ft
Height - Bucket Pin**	14.42 ft	14.75 ft	14.92 ft
Height - Overall**	18.25 ft	18.83 ft	19.2 ft
Reach - Bucket at 45°*	4.17 ft	4.58 ft	4.66 ft
Carry Height - Bucket Pin	1.92 ft	2.08 ft	2 ft
Dig Depth**	5.3 in	5.3 in	5.25 in
Turning Radius - Over Bucket	20.42 ft	20.75 ft	21.25 ft
Rack Angle at Full Lift	51 °	53 °	53 °
Dump Angle at Full Lift	49 °	48 °	47 °
Rack Angle at Carry	47 °	49 °	48 °
Operating Weight	28,787 lb	31,633 lb	36,210 lb

Variants — Source comparison annotation
Source guide	Differing-field count reported
926, 930, and 938	70

Reference directory classification
Equipment group	wheel loader

Cat's listing for the 926, 930, and 938 matches a wheel loader; see the wheel loaders page.

926, 930, and 938: owner reports

Sources: 3 forum discussions about the Caterpillar 926 wheel loaders (926E and earlier); heavyequipmentforums.com.

Cat: Weak travel, steering after reseal and a transmission swap.

Sources: 3 forum discussions about the Caterpillar 930 wheel loaders (930, 930H); heavyequipmentforums.com.

Cat: Cold starting, engine tick and brake calipers.

Sources: 3 forum discussions about the Caterpillar 938 wheel loaders (938G Series II, 938K); heavyequipmentforums.com.

Cat: Implement fault, no drive and a power loss.

926, 930, and 938: forum references — Forum-title search
Forum index	Equipment class queried	Names in the search	Matching titles
Heavy Equipment Forums	wheel loader	Cat and the 926, 930, 938	121

Topics named by those titles
Title topic	Titles
brakes and steering	14
hydraulics	13
electrical and sensors	5

Topic in the title	Threads	Share of matching threads
brakes and steering	14	12%
hydraulics	13	11%
electrical and sensors	5	4%
transmission and drive	5	4%
starting and cranking	5	4%

CAT 926m Endless Eats Issues (Heavy Equipment Forums, 2026-08-16)
CAT 938f No Power Steering (Heavy Equipment Forums, 2026-03-05)
CAT 938k Shows Error Code 351 03 02 (Heavy Equipment Forums, 2026-02-21)
CAT 938g Transmission Gauge Bouncing (Heavy Equipment Forums, 2026-01-24)

Used market for the 926, 930, and 938 — Dated first-page listing snapshot
Observation date	Listing source	Equipment search	Listings
2026-09-24	MachineryTrader	Cat wheel loader	1,061

Model	Listed	Model years	Lowest asking	Highest asking	Median asking	Median hours
926	277	2015 to 2026	$28,500	$215,000	$145,000	1,034
930	338	2005 to 2026	$39,000	$278,165	$132,625	8,876
938	446	1996 to 2025	$25,000	$295,000	$130,000	9,196

926, 930, and 938: recall reference — Dated CPSC search
Search date	Database	Names queried	Search result
2026-09-24	U.S. Consumer Product Safety Commission	Cat together with the wheel loader 926, 930, 938	No matching recall in this search

Sources for this page
Evidence class	Document, classification and recorded date
Manufacturer	Manufacturer: Cat 926 — Caterpillar Inc.. Observed 2026-09-24.
Manufacturer	Manufacturer: Cat 930 — Caterpillar Inc.. Observed 2026-09-24.
Manufacturer	Manufacturer: Cat 938 — Caterpillar Inc.. Observed 2026-09-24.
Forum threads	Forum threads: Heavy Equipment Forums thread index for Cat 926, 930, and 938 — Heavy Equipment Forums. Observed 2026-09-24.
Forum threads	Forum threads: Forum threads read for the Caterpillar 926 wheel loaders (926E and earlier) — Heavyequipmentforums. Observed 2026-09-24.
Used-market listings	Used-market listings: MachineryTrader listings for Cat 926 — MachineryTrader. Observed 2026-09-24.
Federal agency data	Federal agency data: Recall database search for Cat — U.S. Consumer Product Safety Commission. Observed 2026-09-24.

Cat 926, 930, and 938: Configuration records

926

Specification	Source figure
Engine
Rated Gross Power - SAE J1995	170 hp
Engine Model	Cat C7.1*
Performance Mode	Automatic
Rated Gross Power - Rated Engine Speed	1800 r/min
Rated Gross Power - SAE J1995 (DIN)	172 mhp
Rated Engine Power - ISO 14396	168 hp
Rated Engine Power - ISO 14396 (DIN)	170 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed	165 hp
Rated Net Power - ISO 9249 at Minimum Fan Speed	165 hp
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed	167 mhp
Maximum Gross Torque - Engine Speed	1400 r/min
Displacement	427 in³
Bore	4 in
Stroke	5 in
Weights
Operating Weight - High Lift	28,767 lb
Buckets
Bucket Capacities	1.9-5 m3 (2.5-6.5 yd3)
Steering
Steering Cylinder - Bore Diameter	2.8 in
Steering Cylinder - Rod Diameter	1.6 in
Steering Cylinder - Stroke	17.2 in
Maximum Flow - Steering Pump	34 gpm
Maximum Working Pressure - Steering Pump	3,500 psi
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited	2.8 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed	2.4 s
Loader Hydraulic System
Maximum Flow - Implement Pump	40 gpm
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	40 gpm
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	40 gpm
Maximum Working Pressure - Implement Pump	3,771 psi
Relief Pressure - Tilt Cylinder	4,061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3,771 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4,061 psi
Lift Cylinder: Standard Lift Linkage - Bore Diameter	4.3 in (110 mm); original Cat AEHQ8472-01 [source]
Lift Cylinder: Standard Lift Linkage - Rod Diameter	2.4 in
Lift Cylinder: Standard Lift Linkage - Stroke	28.7 in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	5.5 in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	3 in
Tilt Cylinder: Standard Lift Linkage - Stroke	20.3 in
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.5 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)	1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	2.6 s
Hydraulic Cycle Time - Total Cycle Time	9.6 s
Service Refill Capacities
Fuel Tank	51.5 gal (US)
Cooling System	7.9 gal (US)
Engine Crankcase	5.3 gal (US)
Transmission - Gear Box	2.2 gal (US)
Front Axles	6.9 gal (US)
Rear Axles	6.6 gal (US)
Hydraulic System - Including Tank	42.3 gal (US)
Hydraulic Tank	23.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Transmission and speeds
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2	8 mph
Forward and Reverse - Range 3	17 mph
Forward and Reverse - Range 4	25 mph
Tires
Standard Size	20.5 R25, radial (L-3)
Other Choices Include	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Cab
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 LEVEL II
Axles
Front	Fixed; Locking differential (standard)
Rear	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)
Sound
Operator Sound Pressure (ISO 6396:2008)	68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)
Sustainability
Recyclability	95%
Dimensions with Bucket Standard Lift
Height - Ground to Cab**	10.92 ft
Height - Ground to Beacon**	12.17 ft
Height - Ground to Axle Center**	2.25 ft
Height - Ground Clearance**	1.33 ft
Length - Rear Axle to Bumper	6.42 ft
Length - Hitch to Front Axle	4.92 ft
Length - Wheel Base	9.83 ft
Width - Bucket	8.33 ft
Width - Tread Center	6.33 ft
Width - Over Tires	8.33 ft
Turning Radius - Outside of Tires	17.75 ft
Turning Radius - Inside of Tires	9.33 ft
Departure Angle	33 °
Articulation Angle	40 °
Additional specifications
Operating Weight	27,972 lb
Length - Overall*	24.25 ft
Clearance - Bucket at 45°*	9.42 ft
Clearance - Load over Height**	11 ft
Clearance - Level Bucket**	11.75 ft
Height - Bucket Pin**	12.83 ft
Height - Overall**	16.67 ft
Reach - Bucket at 45°*	3.08 ft
Carry Height - Bucket Pin	1.25 ft
Dig Depth**	3.9 in
Turning Radius - Over Bucket	19.33 ft
Rack Angle at Full Lift	53 °
Dump Angle at Full Lift	50 °
Rack Angle at Carry	41 °

Source

930

Specification	Source figure
Engine
Rated Gross Power - SAE J1995	170 hp
Engine Model	Cat C7.1*
Performance Mode	Automatic
Rated Gross Power - Rated Engine Speed	1800 r/min
Rated Gross Power - SAE J1995 (DIN)	172 mhp
Rated Engine Power - ISO 14396	168 hp
Rated Engine Power - ISO 14396 (DIN)	170 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed	165 hp
Rated Net Power - ISO 9249 at Minimum Fan Speed	165 hp
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed	167 mhp
Maximum Gross Torque - Engine Speed	1400 r/min
Displacement	427 in³
Bore	4 in
Stroke	5 in
Weights
Operating Weight - High Lift	31,633 lb
Buckets
Bucket Capacities	1.9-5 m3 (2.5-6.5 yd3)
Steering
Steering Cylinder - Bore Diameter	2.8 in
Steering Cylinder - Rod Diameter	1.6 in
Steering Cylinder - Stroke	17.2 in
Maximum Flow - Steering Pump	34 gpm
Maximum Working Pressure - Steering Pump	3,500 psi
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited	2.8 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed	2.4 s
Loader Hydraulic System
Maximum Flow - Implement Pump	50 gpm
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gpm
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gpm
Maximum Working Pressure - Implement Pump	3,771 psi
Relief Pressure - Tilt Cylinder	4,061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3,771 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4,061 psi
Lift Cylinder: Standard Lift Linkage - Bore Diameter	4.7 in
Lift Cylinder: Standard Lift Linkage - Rod Diameter	2.6 in
Lift Cylinder: Standard Lift Linkage - Stroke	28.7 in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	5.9 in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	3.5 in
Tilt Cylinder: Standard Lift Linkage - Stroke	21.9 in
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.1 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)	1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Total Cycle Time	9.3 s
Service Refill Capacities
Fuel Tank	51.5 gal (US)
Cooling System	7.9 gal (US)
Engine Crankcase	5.3 gal (US)
Transmission - Gear Box	2.2 gal (US)
Front Axles	6.9 gal (US)
Rear Axles	6.6 gal (US)
Hydraulic System - Including Tank	43.6 gal (US)
Hydraulic Tank	23.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Transmission and speeds
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2	8 mph
Forward and Reverse - Range 3	17 mph
Forward and Reverse - Range 4	25 mph
Tires
Standard Size	20.5 R25, radial (L-3)
Other Choices Include	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Cab
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 LEVEL II
Axles
Front	Fixed; Locking differential (standard)
Rear	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)
Sound
Operator Sound Pressure (ISO 6396:2008)	68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)
Sustainability
Recyclability	95%
Dimensions with Bucket Standard Lift
Height - Ground to Cab**	10.92 ft
Height - Ground to Beacon**	12.17 ft
Height - Ground to Axle Center**	2.25 ft
Height - Ground Clearance**	1.33 ft
Length - Rear Axle to Bumper	6.5 ft
Length - Hitch to Front Axle	4.92 ft
Length - Wheel Base	9.83 ft
Width - Bucket	8.33 ft
Width - Tread Center	6.33 ft
Width - Over Tires	8.33 ft
Turning Radius - Outside of Tires	17.75 ft
Turning Radius - Inside of Tires	9.33 ft
Departure Angle	33 °
Articulation Angle	40 °
Additional specifications
Operating Weight	31,124 lb
Length - Overall*	24.67 ft
Clearance - Bucket at 45°*	9.25 ft
Clearance - Load over Height**	10.9 ft
Clearance - Level Bucket**	11.75 ft
Height - Bucket Pin**	12.83 ft
Height - Overall**	16.9 ft
Reach - Bucket at 45°*	3.5 ft
Carry Height - Bucket Pin	1.25 ft
Dig Depth**	3.9 in
Turning Radius - Over Bucket	19.5 ft
Rack Angle at Full Lift	54 °
Dump Angle at Full Lift	49 °
Rack Angle at Carry	43 °

Source

938

Specification	Source figure
Engine
Rated Gross Power - SAE J1995	191 hp
Engine Model	Cat C7.1*
Performance Mode	Automatic
Rated Gross Power - Rated Engine Speed	1800 r/min
Rated Gross Power - SAE J1995 (DIN)	194 mhp
Rated Engine Power - ISO 14396	188 hp
Rated Engine Power - ISO 14396 (DIN)	191 mhp
Rated Net Power - SAE J1349 at Minimum Fan Speed	185 hp
Rated Net Power - ISO 9249 at Minimum Fan Speed	185 hp
Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed	188 mhp
Maximum Gross Torque - Engine Speed	1400 r/min
Displacement	427 in³
Bore	4 in
Stroke	5 in
Weights
Operating Weight - High Lift	36,210 lb
Buckets
Bucket Capacities	1.9-5 m3 (2.5-6.5 yd3)
Steering
Steering Cylinder - Bore Diameter	3.1 in
Steering Cylinder - Rod Diameter	2 in
Steering Cylinder - Stroke	15.7 in
Maximum Flow - Steering Pump	34 gpm
Maximum Working Pressure - Steering Pump	3,500 psi
Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited	3.1 s
Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed	2.3 s
Loader Hydraulic System
Maximum Flow - Implement Pump	50 gpm
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gpm
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gpm
Maximum Working Pressure - Implement Pump	4,061 psi
Relief Pressure - Tilt Cylinder	4,351 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	4,061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4,351 psi
Lift Cylinder: Standard Lift Linkage - Bore Diameter	4.7 in
Lift Cylinder: Standard Lift Linkage - Rod Diameter	2.6 in
Lift Cylinder: Standard Lift Linkage - Stroke	31.1 in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	5.9 in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	3.5 in
Tilt Cylinder: Standard Lift Linkage - Stroke	21.9 in
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.5 s
Hydraulic Cycle Time - Dump (at Maximum Lift Height)	1.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	2.7 s
Hydraulic Cycle Time - Total Cycle Time	9.7 s
Service Refill Capacities
Fuel Tank	51.5 gal (US)
Cooling System	8.5 gal (US) (32 L); original Cat AEHQ8472-01 [source]
Engine Crankcase	5.3 gal (US)
Transmission - Gear Box	2.9 gal (US) (11 L); original Cat AEHQ8472-01 [source]
Front Axles	9.2 gal (US)
Rear Axles	9.2 gal (US)
Hydraulic Tank	23.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Hydraulic System - Including Tank	44.9 gal (US) (170 L); separate from tank-only90L [source]
Transmission and speeds
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2	8 mph
Forward and Reverse - Range 3	17 mph
Forward and Reverse - Range 4	25 mph
Tires
Standard Size	20.5 R25, radial (L-3)
Other Choices Include	20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
Cab
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 LEVEL II
Axles
Front	Fixed; Locking differential (standard)
Rear	Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons)
Sound
Operator Sound Pressure (ISO 6396:2008)	68 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)	101 dB(A)
Sustainability
Recyclability	96%
Dimensions with Bucket Standard Lift
Height - Ground to Cab**	10.92 ft
Height - Ground to Beacon**	12.17 ft
Height - Ground to Axle Center**	2.25 ft
Height - Ground Clearance**	1.25 ft
Length - Rear Axle to Bumper	6.42 ft
Length - Hitch to Front Axle	5 ft
Length - Wheel Base	10 ft
Width - Bucket	9 ft
Width - Tread Center	6.83 ft
Width - Over Tires	8.83 ft
Turning Radius - Outside of Tires	18.16 ft
Turning Radius - Inside of Tires	9.33 ft
Departure Angle	33 °
Articulation Angle	40 °
Additional specifications
Operating Weight	35,528 lb
Length - Overall*	25.08 ft
Clearance - Bucket at 45°*	9.3 ft
Clearance - Load over Height**	11 ft
Clearance - Level Bucket**	11.9 ft
Height - Bucket Pin**	13 ft
Height - Overall**	17.33 ft
Reach - Bucket at 45°*	3.75 ft
Carry Height - Bucket Pin	1.33 ft
Dig Depth**	4 in
Turning Radius - Over Bucket	20.08 ft
Rack Angle at Full Lift	54 °
Dump Angle at Full Lift	49 °
Rack Angle at Carry	43 °

Source

More in Cat: 926E/930R, 924Hz/928Hz, 938H: engine ratings/hydraulic circuits/brake-pedal behavior.

Cat 926, 930, and 938 specifications

Hydrostatic modes change how these loaders respond

Choose a hydraulic function, then read its rating conditions

Check the installed generation and weighing entitlement

926, 930, and 938: owner reports

Sources for this page

Cat 926, 930, and 938: Configuration records