Machine models

Deere 650J LGP and 750C WT: blade, tracks and hydrostatic drive

650J LGP: separate the blade system from the hydrostatic drivetrain

Deere's March 2010 J-Series brochure describes two independently powered tracks, each using a variable-displacement pump and two-speed motor. The blade circuit is a separate open-centre gear-pump system. Its listed implement flow therefore does not describe all oil moving through the hydrostatic drivetrain.

A slow blade and weak travel require different observations, even if they occur on the same dozer.

The decelerator can be configured to slow both travel and engine speed, or travel alone. Total Machine Control also changes the machine's operating response. During an inspection, establish the selected control settings before interpreting a different pedal response as a fault.

The LGP undercarriage combines a wider gauge and shoes with a longer ground-contact length than the LT. Deere also lists Standard and Maximum Life undercarriages separately. Their ground-pressure entries differ, so do not transfer a standard-undercarriage figure to every LGP offered for sale.

The optional cab, winch, ripper and guards add further weight; the published base machine is not an inventory of everything installed on an auction unit.

Source: John Deere 450J/550J/650J brochure, March24,2010, controls and LGP equipment.

750C WT: a wide-track machine still needs its blade identified

The 750C sheet gives the WT different weights for a straight blade and a high-production Semi-U blade. Its LGP row instead describes an all-hydraulic PAT arrangement. A WT designation alone does not mean the blade angles hydraulically.

Check the fitted blade and its controls before comparing capacities with the six-way blade on a 650J.

WT and LT share the listed track gauge and ground-contact length, but the WT uses wider shoes. The LGP has a wider gauge and longer ground contact. These distinctions explain why swapping an LT width, a WT shoe size and an LGP pressure into one description creates a machine that the brochure never specified.

Service compartments differ too. Deere separates the hydraulic reservoir from the hydrostatic-transmission reservoir and gives two reduction-stage refill quantities for each final drive. Treating one of those stage quantities as the entire drivetrain fill would omit other compartments.

Use the compartment drawing and the matching manual when planning a drain-and-refill job.

Source: John Deere DKA750CII, October2000, 750C WT blade, track and compartment schedules.
Earlier reference entries and original manufacturer corrections
Model and fieldEarlier entryManufacturer figure and scopeSource
750C WT Final Drives Fluid Capacity6.3 galEACH drive: first reduction 6.25 US gal (23.6 L); second reduction 3.25 US gal (12.3 L),DKA750CII;earlier 6.3 gal covers only first stageOriginal document
750C WT Engine Oil Capacity5.1 gal20 USqt (19 L),including spin-on filter, DKA750CII;earlier 5.1 gal reference separately retainedOriginal document
750C WT Width Over Tracks8 ft108 in nominal calculated span:74 in gauge + 34 in shoe,DKA750CII;not a surveyed transport width. Earlier 8 ft belongs to LT width rowOriginal document
Entries in this reference
Listing-entry count
2
Short answer

Deere 650J LGP and 750C WT: blade, tracks and hydrostatic drive: crawler dozers.

Selected configuration figures
ConfigurationDocumented field and quantity
650J LGP
Net Power
99 hp
Operating Weight
19,791 lb
750C WT
Gross Power
148 hp
Operating Weight
33,324 lb
650J LGP and 750C WT specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
John Deere650J LGP and 750C WT2650J LGP and 750C WT
Dimensions and weight
Specification650J LGP750C WT
Length W/ Blade13.96 ft16.26 ft
Width Over Tracks8.08 ft108 in nominal calculated span:74 in gauge + 34 in shoe,DKA750CII;not a surveyed transport width. Earlier 8 ft belongs to LT width row
Height To Top Of Cab9.09 ft10.06 ft
Length Of Track On Ground7.67 ft8.51 ft
Ground Clearance1.2 ft1.22 ft
Undercarriage
Specification650J LGP750C WT
Track Gauge5.75 ft6.17 ft
Standard Shoe Size28 in34 in
Number Of Track Rollers Per Side77
Ground Pressure3.8 psi4.91 psi
Number Of Shoes Per Side4040
Ground Contact Area5,152 in26,936 in2
Track Pitch6.73 in7.5 in
Engine
Specification650J LGP750C WT
Number Of Cylinders46
Engine Model4045T6068T
Net Power99 hp140 hp
Power Measured @2,200 rpm2,100 rpm
Max Torque329 lb-ft420 lb-ft
Displacement276 cu in414 cu in
Torque Measured @1,200 rpm1,300 rpm
AspirationAltitude-compensating turbochargerAltitude-compensating turbocharger
Specification750C WT
Gross Power148 hp
Operational
Specification650J LGP750C WT
Operating Weight19,791 lb33,324 lb
Fuel Capacity47 gal74 gal
Cooling System Fluid Capacity4.3 gal7 gal
Engine Oil Capacity3.7 gal20 USqt (19 L),including spin-on filter, DKA750CII;earlier 5.1 gal reference separately retained
Hydraulic Fluid Capacity8.5 gal18 gal
Final Drives Fluid Capacity1.8 galEACH drive: first reduction 6.25 US gal (23.6 L); second reduction 3.25 US gal (12.3 L),DKA750CII;earlier 6.3 gal covers only first stage
Operating Voltage12 V24 V
Alternator Supplied Amperage65 amps45 amps
Specification650J LGP
Powertrain Fluid Capacity11.3 gal
Transmission and speeds
Specification650J LGP750C WT
Transmission TypeHydrostaticHydrostatic
Max Speed - Forward5 mph6.8 mph
Max Speed - Reverse5 mph6.8 mph
Hydraulic System
Specification650J LGP750C WT
Pump TypeGearGear
Relief Valve Pressure3,000 psi2,000 psi
Pump Flow Capacity15 gpm38 gpm
Standard Blade
Specification650J LGP750C WT
Blade width9.6 ft11.1 ft
Blade height32.6 in38.4 in
Capacity2.3 yd33.3 yd3
Cutting Depth19.7 in20.2 in
Specification650J LGP
Blade Angle (Both Directions)22.2 degrees
Variants — Source comparison annotation
Source guideDiffering-field count reported
650J LGP and 750C WT36
Ratios
Figure650J LGP750C WT
Engine horsepower per 1,000 lb of weight5.04.2
Pump flow per engine horsepower0.15 gpm0.27 gpm
Fuel tank per engine horsepower0.47 gal0.53 gal

650J LGP and 750C WT: owner reports

Sources: 3 forum discussions about the John Deere 650 (650K dozer and 650 compact tractor); heavyequipmentforums.com and tractorbynet.com.Sources: 3 forum discussions about the John Deere 750 (750 compact tractor and 750J dozer); tractorbynet.com and heavyequipmentforums.com.
650J LGP and 750C WT: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumscrawler dozerJohn Deere and the 750C line that the 650J LGP, 750C WT belongs to (no title names the exact model)54
Topics named by those titles
Title topicTitles
transmission and drive5
starting and cranking2
electrical and sensors2
Topic in the titleThreadsShare of matching threads
transmission and drive59%
starting and cranking24%
electrical and sensors24%
hydraulics24%
Used market for the 650J LGP and 750C WT — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderJohn Deere crawler dozer12
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
650J LGP122005 to 2012$27,500$122,500$49,9006,169
650J LGP and 750C WT: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionJohn Deere together with the crawler dozer 650J LGP, 750C WTNo matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
Reference site
Forum threads
Forum threads
Forum threads
Used-market listings
Federal agency data

Deere 650J LGP and 750C WT: blade, tracks and hydrostatic drive: Configuration records

650J LGP
SpecificationSource figure
Dimensions and weight
Length W/ Blade13.96 ft
Width Over Tracks8.08 ft
Height To Top Of Cab9.09 ft
Ground Clearance1.2 ft
Undercarriage
Standard Shoe Size28 in
Track Pitch6.73 in
Number Of Shoes Per Side40
Ground Pressure3.8 psi
Ground Contact Area5,152 in2
Number Of Track Rollers Per Side7
Track Gauge5.75 ft
Engine
Number Of Cylinders4
Engine Model4045T
Net Power99 hp
Power Measured @2,200 rpm
Max Torque329 lb-ft
Displacement276 cu in
Torque Measured @1,200 rpm
AspirationAltitude-compensating turbocharger
Operational
Operating Weight19,791 lb
Fuel Capacity47 gal
Cooling System Fluid Capacity4.3 gal
Engine Oil Capacity3.7 gal
Hydraulic Fluid Capacity8.5 gal
Powertrain Fluid Capacity11.3 gal
Final Drives Fluid Capacity1.8 gal
Operating Voltage12 V
Alternator Supplied Amperage65 amps
Transmission and speeds
Transmission TypeHydrostatic
Max Speed - Forward5 mph
Max Speed - Reverse5 mph
Standard Blade
Blade width9.6 ft
Blade height32.6 in
Capacity2.3 yd3
Blade Angle (Both Directions)22.2 degrees
Cutting Depth19.7 in
Additional specifications
Length Of Track On Ground7.67 ft
Pump TypeGear
Relief Valve Pressure3,000 psi
Pump Flow Capacity15 gpm
2010 Engine And Weight Edition4045H / Tier 3 / Stage IIIA, March 2010 brochure; earlier 4045T record separate. 19,750 lb with 128 in blade / 28 in shoes; earlier 19,791 lb arrangement unidentified [source]
2010 Undercarriage Pressure ScopeStandard 3.8 psi; Maximum Life 4.0 psi; 28 in shoes / 40 shoes / seven rollers per side, March 2010 brochure [source]

Source

750C WT
SpecificationSource figure
Dimensions and weight
Length W/ Blade16.26 ft
Width Over Tracks108 in nominal calculated span:74 in gauge + 34 in shoe,DKA750CII;not a surveyed transport width. Earlier 8 ft belongs to LT width row [source]
Height To Top Of Cab10.06 ft
Ground Clearance1.22 ft
Undercarriage
Standard Shoe Size34 in
Track Pitch7.5 in
Number Of Shoes Per Side40
Ground Pressure4.91 psi
Ground Contact Area6,936 in2
Number Of Track Rollers Per Side7
Track Gauge6.17 ft
Engine
Number Of Cylinders6
Engine Model6068T
Gross Power148 hp
Net Power140 hp
Power Measured @2,100 rpm
Max Torque420 lb-ft
Displacement414 cu in
Torque Measured @1,300 rpm
AspirationAltitude-compensating turbocharger
Operational
Operating Weight33,324 lb
Fuel Capacity74 gal
Cooling System Fluid Capacity7 gal
Engine Oil Capacity20 USqt (19 L),including spin-on filter, DKA750CII;earlier 5.1 gal reference separately retained [source]
Hydraulic Fluid Capacity18 gal
Operating Voltage24 V
Alternator Supplied Amperage45 amps
Transmission and speeds
Transmission TypeHydrostatic
Max Speed - Forward6.8 mph
Max Speed - Reverse6.8 mph
Standard Blade
Blade width11.1 ft
Blade height38.4 in
Capacity3.3 yd3
Cutting Depth20.2 in
Additional specifications
Length Of Track On Ground8.51 ft
Each Final Drive Reduction Stage RefillsEACH drive: first reduction 6.25 US gal (23.6 L); second reduction 3.25 US gal (12.3 L),DKA750CII;earlier 6.3 gal covers only first stage [source]
Pump TypeGear
Relief Valve Pressure2,000 psi
Pump Flow Capacity38 gpm
Blade Specific Weight ScopeStraight blade 33,324 lb; high-production Semi-U 33,843 lb, DKA750CII; WT differs from LGP PAT blade configuration [source]
Separate Hydrostatic Reservoir22 US gal (83.3 L) hydrostatic reservoir; 18 US gal (68 L) implement hydraulic reservoir, DKA750CII [source]

Source

Compare John Deere 650J LGP, 750C WT
Dimensions and weight
Specification650J LGP750C WT
Length W/ Blade13.96 ft16.26 ft
Width Over Tracks8.08 ft108 in nominal calculated span:74 in gauge + 34 in shoe,DKA750CII;not a surveyed transport width. Earlier 8 ft belongs to LT width row [source]
Height To Top Of Cab9.09 ft10.06 ft
Length Of Track On Ground7.67 ft8.51 ft
Ground Clearance1.2 ft1.22 ft
Undercarriage
Specification650J LGP750C WT
Track Gauge5.75 ft6.17 ft
Standard Shoe Size28 in34 in
Number Of Track Rollers Per Side77
Ground Pressure3.8 psi4.91 psi
Number Of Shoes Per Side4040
Ground Contact Area5,152 in26,936 in2
Track Pitch6.73 in7.5 in
Engine
Specification650J LGP750C WT
Number Of Cylinders46
Engine Model4045T6068T
Net Power99 hp140 hp
Power Measured @2,200 rpm2,100 rpm
Max Torque329 lb-ft420 lb-ft
Displacement276 cu in414 cu in
Torque Measured @1,200 rpm1,300 rpm
AspirationAltitude-compensating turbochargerAltitude-compensating turbocharger
Operational
Specification650J LGP750C WT
Operating Weight19,791 lb33,324 lb
Fuel Capacity47 gal74 gal
Cooling System Fluid Capacity4.3 gal7 gal
Engine Oil Capacity3.7 gal20 USqt (19 L),including spin-on filter, DKA750CII;earlier 5.1 gal reference separately retained [source]
Hydraulic Fluid Capacity8.5 gal18 gal
Measurement and equipment basis (specified in each cell)1.8 galEACH drive: first reduction 6.25 US gal (23.6 L); second reduction 3.25 US gal (12.3 L),DKA750CII;earlier 6.3 gal covers only first stage [source]
Operating Voltage12 V24 V
Alternator Supplied Amperage65 amps45 amps
Transmission and speeds
Specification650J LGP750C WT
Transmission TypeHydrostaticHydrostatic
Max Speed - Forward5 mph6.8 mph
Max Speed - Reverse5 mph6.8 mph
Hydraulic System
Specification650J LGP750C WT
Pump TypeGearGear
Relief Valve Pressure3,000 psi2,000 psi
Pump Flow Capacity15 gpm38 gpm
Standard Blade
Specification650J LGP750C WT
Blade width9.6 ft11.1 ft
Blade height32.6 in38.4 in
Capacity2.3 yd33.3 yd3
Cutting Depth19.7 in20.2 in

More in John Deere: 655B–755B, 450G–550J LT.