Machine models

Komatsu PC300-6 through PC350LC-6 equipment choices

MIGHTY, HD and EXCEL describe different equipment choices

Komatsu's application handbook separates the MIGHTY construction package from the HD undercarriage package. For the PC350 MIGHTY, it identifies a strengthened boom, larger arm sections and full roller guarding. Those changes address loads on the front and chassis during demanding work.

The suffix is more informative than comparing engine horsepower alone.

The PC300HD-6 uses undercarriage components from the larger PC400-6. The handbook contrasts that arrangement with the simpler EXCEL and Custom machines, aimed at straightforward operation and maintenance. Its variable-gauge transport discussion specifically identifies the PC400HD; it should not be used to promise retractable tracks on every PC300HD.

Check which package the serial plate and fitted frame actually establish.

Source: Original Komatsu application handbook, MIGHTY, HD and EXCEL selection sections.

Swing priority changes the combined boom-and-swing response

The early PC300/350-6 shop manual describes a swing-priority switch that changes the matching of boom raise and upper-structure rotation. Its load-sensing selector changes the flow division. A different boom-and-swing response can therefore reflect a selected control function, not simply weak pump output.

The same manual distinguishes two variable-displacement main pumps from the separate gear control pump. It also separates an operator-selected swing lock from the automatic holding brake. Record the work mode, warning display and affected movement when describing a fault.

Those details distinguish a control problem from a complaint about the excavator's maximum digging envelope.

Source: Original Komatsu SEBM006603 shop manual, hydraulic and electronic-control sections.

The lever button has a timed boost and a separate slow-down role

The later operating manual describes the left-lever button as either power-max or swift slow-down, according to the selected function. Power-max ends automatically after its timed interval, even if the button remains pressed. Slow-down instead lasts while the operator holds the button.

A machine that stops boosting is not necessarily losing hydraulic power.

The manual also distinguishes the selected travel-speed lamp from the travel speed under load. Automatic downshifting can leave the higher-speed lamp illuminated. Its Active mode is another separate selection: the base work-mode display does not change when Active mode is enabled.

Photograph the complete panel state, including those independent indicators.

Source: Original Komatsu operating manual, cover SEAM009001, control explanations.
Original entries retained beside manufacturer corrections
Model and fieldEarlier entryVerified scope
PC300-6 Gross Power171.7 hp231.7 hp flywheel (172.8 kW), SEBM006603; not a verified gross rating
PC300LC-6 Power Measured @1,750 rpm2,050 rpm, SAA6D108-2 flywheel rating in SEBM006603
PC300-6 Displacement358.9 cu in7,148 cm3, SAA6D108-2 in SEBM006603; original early-serial schedule
PC300-6 Fuel Capacity89.9 gal540 L (143 US gal), SEAM009001 covering PC300/300LC serial 33001 and up
PC300LC-6 Hydraulic Pump Flow Capacity36.5 gpm2 x 251 L/min main piston pumps; separate 42 L/min gear control pump, SEBM006603
Manufacturer figures for the separately named arrangement
Model and fieldQuantity and scopeSource
PC300-6 Flywheel Power, SEBM006603231.7 hp (172.8 kW) at 2,050 rpm; not a manufacturer gross-power claimOriginal publication
Entries in this reference
Listing-entry count
8
Short answer

Komatsu PC300-6 through PC350LC-6 equipment choices: full-size excavators.

Selected configuration figures
ConfigurationDocumented field and quantity
PC300-6
Flywheel Power, SEBM006603
231.7 hp (172.8 kW) at 2,050 rpm; not a manufacturer gross-power claim [source]
Operating Weight
63,603 lb
PC300-6 EXCEL
Gross Power
232 hp
Operating Weight
67,902 lb
PC300HD-6
Gross Power
232 hp
Operating Weight
82,453 lb
PC300LC-6
Gross Power
232 hp
Operating Weight
70,328 lb
PC300LC-6 EXCEL
Gross Power
232 hp
Operating Weight
69,446 lb
PC340-6
Gross Power
232 hp
Operating Weight
71,606 lb
PC350-6 MIGHTY
Gross Power
232 hp
Operating Weight
71,209 lb
PC350LC-6 MIGHTY
Gross Power
232 hp
Operating Weight
73,634 lb
PC300-6 to PC350LC-6 MIGHTY specification matrix — Listing labels reported by the source
Publisher nameSource guideListing-entry countLabels named by the source
KomatsuPC300-6 to PC350LC-6 MIGHTY8PC300-6, PC300-6 EXCEL, PC300HD-6, PC300LC-6, PC300LC-6 EXCEL, PC340-6, and 2 more
Boom/Stick Option (Hex) 1
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Shipping Length Of Unit36.44 ft36.44 ft36.11 ft36.44 ft36.44 ft36.41 ft36.16 ft36.16 ft
Shipping Height Of Unit11.37 ft11.37 ft11.16 ft11.37 ft11.37 ft11.57 ft10.77 ft10.77 ft
Max Cutting Height31.44 ft31.44 ft31.8 ft31.44 ft31.44 ft31.47 ft33.5 ft33.5 ft
Max Loading Height21.64 ft21.64 ft22.02 ft21.64 ft21.64 ft21.71 ft23.33 ft23.33 ft
Max Reach Along Ground32.65 ft32.65 ft32.55 ft32.65 ft32.65 ft32.62 ft35.83 ft35.83 ft
Max Vertical Wall Digging Depth16.8 ft16.8 ft16.28 ft16.8 ft16.8 ft16.75 ft21.26 ft21.26 ft
Max Digging Depth20.85 ft20.85 ft20.54 ft20.85 ft20.85 ft20.87 ft24.22 ft24.22 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 10'5" (3185mm)Boom 21'3" (6470mm)/Stick 10'5" (3185mm)
Dimensions and weight
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Ground Clearance1.65 ft1.65 ft2.32 ft1.65 ft1.65 ft1.64 ft1.65 ft1.65 ft
Height To Top Of Cab10.27 ft10.27 ft11.04 ft10.27 ft10.27 ft10.27 ft10.27 ft10.27 ft
Width To Outside Of Tracks10.47 ft10.47 ft11.72 ft10.8 ft10.47 ft10.47 ft10.47 ft10.47 ft
Length Of Track On Ground12.14 ft12.14 ft13.19 ft13.23 ft13.23 ft12.14 ft12.14 ft13.23 ft
Tail Swing Radius10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft
Removal Counterweight Clearance3.89 ft3.89 ft4.66 ft3.89 ft3.89 ft3.9 ft3.89 ft3.89 ft
Undercarriage
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Track Gauge8.5 ft8.5 ft9.42 ft8.5 ft8.5 ft8.5 ft8.5 ft8.5 ft
Shoe Size23.63 in23.63 in27.56 in27.56 in23.63 in23.63 in23.63 in23.63 in
Ground Pressure9.1 psi9.1 psi8.81 psi7.4 psi8.5 psi9.5 psi9.5 psi9.1 psi
Max Travel Speed3.42 mph3.42 mph2.74 mph3.42 mph3.42 mph3.42 mph3.42 mph3.42 mph
Engine
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Number Of Cylinders66666666
Engine ModelSAA6D108ESAA6D108ESA6D114ESAA6D108ESAA6D108ESA6D114ESAA6D108ESAA6D108E
Gross Power231.7 hp flywheel (172.8 kW), SEBM006603; not a verified gross rating232 hp232 hp232 hp232 hp232 hp232 hp232 hp
Power Measured @2,050 rpm2,050 rpm1,750 rpm2,050 rpm, SAA6D108-2 flywheel rating in SEBM0066032,050 rpm1,750 rpm2,050 rpm2,050 rpm
Displacement7,148 cm3, SAA6D108-2 in SEBM006603; original early-serial schedule436.4 cu in504.7 cu in436.4 cu in436.4 cu in504.7 cu in436.4 cu in436.4 cu in
Operational
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Operating Weight63,603 lb67,902 lb82,453 lb70,328 lb69,446 lb71,606 lb71,209 lb73,634 lb
Fuel Capacity540 L (143 US gal), SEAM009001 covering PC300/300LC serial 33001 and up142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal
Hydraulic System Fluid Capacity50 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi
Hydraulic Pump Flow Capacity138.5 gpm132.7 gpm126.9 gpm2 x 251 L/min main piston pumps; separate 42 L/min gear control pump, SEBM006603132.7 gpm132.1 gpm138.5 gpm138.5 gpm
Swing Mechanism
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Swing Speed10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm
Buckets
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Reference Bucket Capacity1.8 yd31.8 yd31.3 yd31.8 yd31.8 yd31.8 yd31.8 yd31.8 yd3
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6
Minimum Bucket Capacity0.7 yd30.7 yd31.3 yd30.7 yd30.7 yd30.7 yd3
Maximum Bucket Capacity2.4 yd32.4 yd32.5 yd32.4 yd32.4 yd32.4 yd3
Variants — Source comparison annotation
Source guideDiffering-field count reported
PC300-6 to PC350LC-6 MIGHTY28
Ratios — Earlier arithmetic retained; manufacturer corrections and their equipment editions take precedence
FigurePC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Engine horsepower per 1,000 lb of weight2.73.42.83.33.33.23.33.2
Fuel tank per engine horsepower0.52 gal0.62 gal0.62 gal0.62 gal0.62 gal0.62 gal0.62 gal0.62 gal
Hydraulic power from the listed pump flow and relief pressure408.1 hp391.0 hp373.9 hp107.5 hp391.0 hp389.2 hp408.1 hp408.1 hp

PC300-6 to PC350LC-6 MIGHTY: owner reports

Related account: “Engine stall, dead hydraulics and a blown fuse”: HB335LC-1 to PC350LC-8M0.

PC300-6 to PC350LC-6 MIGHTY: forum references — Forum-title search
Forum indexEquipment class queriedNames in the searchMatching titles
Heavy Equipment Forumsfull-size excavatorKomatsu and the PC300 6, PC300HD, PC300LC 6, PC340, PC350, PC350LC line that the PC300-6, PC300-6 EXCEL, PC300HD-6, PC300LC-6 belongs to (no title names the exact model)26
Topics named by those titles
Title topicTitles
fuel system6
hydraulics3
starting and cranking2
Topic in the titleThreadsShare of matching threads
fuel system623%
hydraulics312%
starting and cranking28%
electrical and sensors28%
Used market for the PC300-6 to PC350LC-6 MIGHTY — Dated first-page listing snapshot
Observation dateListing sourceEquipment searchListings
2026-09-24MachineryTraderKomatsu full-size excavator4
ModelListedModel yearsLowest askingHighest askingMedian askingMedian hours
PC300-61Not statedNone shownNone shownNone shownNone shown
PC300-6 EXCEL1Not statedNone shownNone shownNone shownNone shown
PC340-61Not statedNone shownNone shownNone shownNone shown
PC350-6 MIGHTY12022$41,000$41,000$41,000None shown
PC300-6 to PC350LC-6 MIGHTY: recall reference — Dated CPSC search
Search dateDatabaseNames queriedSearch result
2026-09-24U.S. Consumer Product Safety CommissionKomatsu together with the full-size excavator PC300-6, PC300-6 EXCEL, PC300HD-6, PC300LC-6No matching recall in this search

Sources for this page

Evidence classDocument, classification and recorded date
Reference site
Reference site
Reference site
Reference site
Reference site
Reference site
Reference site
Reference site
Forum threads
Used-market listings
Federal agency data

Komatsu PC300-6 through PC350LC-6 equipment choices: Configuration records

PC300-6
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.14 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure9.1 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement7,148 cm3, SAA6D108-2 in SEBM006603; original early-serial schedule [source]
Power Measured @2,050 rpm
Operational
Fuel Capacity540 L (143 US gal), SEAM009001 covering PC300/300LC serial 33001 and up [source]
Hydraulic System Fluid Capacity50 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity138.5 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.44 ft
Shipping Height Of Unit11.37 ft
Max Cutting Height31.44 ft
Max Loading Height21.64 ft
Max Reach Along Ground32.65 ft
Max Vertical Wall Digging Depth16.8 ft
Max Digging Depth20.85 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.8 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.4 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight63,603 lb
Flywheel Power, SEBM006603231.7 hp (172.8 kW) at 2,050 rpm; not a manufacturer gross-power claim [source]

Source

PC300-6 EXCEL
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.14 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure9.1 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement436.4 cu in
Power Measured @2,050 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity132.7 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.44 ft
Shipping Height Of Unit11.37 ft
Max Cutting Height31.44 ft
Max Loading Height21.64 ft
Max Reach Along Ground32.65 ft
Max Vertical Wall Digging Depth16.8 ft
Max Digging Depth20.85 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.8 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.4 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight67,902 lb

Source

PC300HD-6
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance2.32 ft
Height To Top Of Cab11.04 ft
Width To Outside Of Tracks11.72 ft
Length Of Track On Ground13.19 ft
Removal Counterweight Clearance4.66 ft
Undercarriage
Shoe Size27.56 in
Ground Pressure8.81 psi
Max Travel Speed2.74 mph
Engine
Number Of Cylinders6
Engine ModelSA6D114E
Displacement504.7 cu in
Power Measured @1,750 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity126.9 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.11 ft
Shipping Height Of Unit11.16 ft
Max Cutting Height31.8 ft
Max Loading Height22.02 ft
Max Reach Along Ground32.55 ft
Max Vertical Wall Digging Depth16.28 ft
Max Digging Depth20.54 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.3 yd3
Minimum Bucket Capacity1.3 yd3
Maximum Bucket Capacity2.5 yd3
Additional specifications
Track Gauge9.42 ft
Operating Weight82,453 lb

Source

PC300LC-6
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.8 ft
Length Of Track On Ground13.23 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size27.56 in
Ground Pressure7.4 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement436.4 cu in
Power Measured @2,050 rpm, SAA6D108-2 flywheel rating in SEBM006603 [source]
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity2 x 251 L/min main piston pumps; separate 42 L/min gear control pump, SEBM006603 [source]
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.44 ft
Shipping Height Of Unit11.37 ft
Max Cutting Height31.44 ft
Max Loading Height21.64 ft
Max Reach Along Ground32.65 ft
Max Vertical Wall Digging Depth16.8 ft
Max Digging Depth20.85 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.8 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.4 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight70,328 lb

Source

PC300LC-6 EXCEL
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground13.23 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure8.5 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement436.4 cu in
Power Measured @2,050 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity132.7 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.44 ft
Shipping Height Of Unit11.37 ft
Max Cutting Height31.44 ft
Max Loading Height21.64 ft
Max Reach Along Ground32.65 ft
Max Vertical Wall Digging Depth16.8 ft
Max Digging Depth20.85 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.8 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.4 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight69,446 lb

Source

PC340-6
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.64 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.14 ft
Removal Counterweight Clearance3.9 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure9.5 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSA6D114E
Displacement504.7 cu in
Power Measured @1,750 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity132.1 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.41 ft
Shipping Height Of Unit11.57 ft
Max Cutting Height31.47 ft
Max Loading Height21.71 ft
Max Reach Along Ground32.62 ft
Max Vertical Wall Digging Depth16.75 ft
Max Digging Depth20.87 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)
Buckets
Reference Bucket Capacity1.8 yd3
Minimum Bucket Capacity0.7 yd3
Maximum Bucket Capacity2.4 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight71,606 lb

Source

PC350-6 MIGHTY
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground12.14 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure9.5 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement436.4 cu in
Power Measured @2,050 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity138.5 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.16 ft
Shipping Height Of Unit10.77 ft
Max Cutting Height33.5 ft
Max Loading Height23.33 ft
Max Reach Along Ground35.83 ft
Max Vertical Wall Digging Depth21.26 ft
Max Digging Depth24.22 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 10'5" (3185mm)
Buckets
Reference Bucket Capacity1.8 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight71,209 lb

Source

PC350LC-6 MIGHTY
SpecificationSource figure
Dimensions and weight
Tail Swing Radius10.83 ft
Ground Clearance1.65 ft
Height To Top Of Cab10.27 ft
Width To Outside Of Tracks10.47 ft
Length Of Track On Ground13.23 ft
Removal Counterweight Clearance3.89 ft
Undercarriage
Shoe Size23.63 in
Ground Pressure9.1 psi
Max Travel Speed3.42 mph
Engine
Number Of Cylinders6
Engine ModelSAA6D108E
Displacement436.4 cu in
Power Measured @2,050 rpm
Gross Power232 hp
Operational
Fuel Capacity142.7 gal
Hydraulic System Fluid Capacity54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi
Hydraulic Pump Flow Capacity138.5 gpm
Swing Mechanism
Swing Speed10 rpm
Boom/Stick Option (Hex) 1
Shipping Length Of Unit36.16 ft
Shipping Height Of Unit10.77 ft
Max Cutting Height33.5 ft
Max Loading Height23.33 ft
Max Reach Along Ground35.83 ft
Max Vertical Wall Digging Depth21.26 ft
Max Digging Depth24.22 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 10'5" (3185mm)
Buckets
Reference Bucket Capacity1.8 yd3
Additional specifications
Track Gauge8.5 ft
Operating Weight73,634 lb

Source

Compare Komatsu PC300-6, PC300-6 EXCEL, PC300HD-6, PC300LC-6, PC300LC-6 EXCEL, PC340-6, PC350-6 MIGHTY, PC350LC-6 MIGHTY
Boom/Stick Option (Hex) 1
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Shipping Length Of Unit36.44 ft36.44 ft36.11 ft36.44 ft36.44 ft36.41 ft36.16 ft36.16 ft
Shipping Height Of Unit11.37 ft11.37 ft11.16 ft11.37 ft11.37 ft11.57 ft10.77 ft10.77 ft
Max Cutting Height31.44 ft31.44 ft31.8 ft31.44 ft31.44 ft31.47 ft33.5 ft33.5 ft
Max Loading Height21.64 ft21.64 ft22.02 ft21.64 ft21.64 ft21.71 ft23.33 ft23.33 ft
Max Reach Along Ground32.65 ft32.65 ft32.55 ft32.65 ft32.65 ft32.62 ft35.83 ft35.83 ft
Max Vertical Wall Digging Depth16.8 ft16.8 ft16.28 ft16.8 ft16.8 ft16.75 ft21.26 ft21.26 ft
Max Digging Depth20.85 ft20.85 ft20.54 ft20.85 ft20.85 ft20.87 ft24.22 ft24.22 ft
Boom/Stick Option (Hex) 1Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 7'3" (2200mm)Boom 21'3" (6470mm)/Stick 10'5" (3185mm)Boom 21'3" (6470mm)/Stick 10'5" (3185mm)
Dimensions and weight
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Ground Clearance1.65 ft1.65 ft2.32 ft1.65 ft1.65 ft1.64 ft1.65 ft1.65 ft
Height To Top Of Cab10.27 ft10.27 ft11.04 ft10.27 ft10.27 ft10.27 ft10.27 ft10.27 ft
Width To Outside Of Tracks10.47 ft10.47 ft11.72 ft10.8 ft10.47 ft10.47 ft10.47 ft10.47 ft
Length Of Track On Ground12.14 ft12.14 ft13.19 ft13.23 ft13.23 ft12.14 ft12.14 ft13.23 ft
Tail Swing Radius10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft10.83 ft
Removal Counterweight Clearance3.89 ft3.89 ft4.66 ft3.89 ft3.89 ft3.9 ft3.89 ft3.89 ft
Undercarriage
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Track Gauge8.5 ft8.5 ft9.42 ft8.5 ft8.5 ft8.5 ft8.5 ft8.5 ft
Shoe Size23.63 in23.63 in27.56 in27.56 in23.63 in23.63 in23.63 in23.63 in
Ground Pressure9.1 psi9.1 psi8.81 psi7.4 psi8.5 psi9.5 psi9.5 psi9.1 psi
Max Travel Speed3.42 mph3.42 mph2.74 mph3.42 mph3.42 mph3.42 mph3.42 mph3.42 mph
Engine
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Number Of Cylinders66666666
Engine ModelSAA6D108ESAA6D108ESA6D114ESAA6D108ESAA6D108ESA6D114ESAA6D108ESAA6D108E
Power Measured @2,050 rpm2,050 rpm1,750 rpm2,050 rpm, SAA6D108-2 flywheel rating in SEBM006603 [source]2,050 rpm1,750 rpm2,050 rpm2,050 rpm
Displacement7,148 cm3, SAA6D108-2 in SEBM006603; original early-serial schedule [source]436.4 cu in504.7 cu in436.4 cu in436.4 cu in504.7 cu in436.4 cu in436.4 cu in
Operational
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Operating Weight63,603 lb67,902 lb82,453 lb70,328 lb69,446 lb71,606 lb71,209 lb73,634 lb
Fuel Capacity540 L (143 US gal), SEAM009001 covering PC300/300LC serial 33001 and up [source]142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal142.7 gal
Hydraulic System Fluid Capacity50 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal54.2 gal
Hydraulic System Relief Valve Pressure5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi5,050 psi
Hydraulic Pump Flow Capacity138.5 gpm132.7 gpm126.9 gpm2 x 251 L/min main piston pumps; separate 42 L/min gear control pump, SEBM006603 [source]132.7 gpm132.1 gpm138.5 gpm138.5 gpm
Swing Mechanism
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Swing Speed10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm10 rpm
Buckets
SpecificationPC300-6PC300-6 EXCELPC300HD-6PC300LC-6PC300LC-6 EXCELPC340-6PC350-6 MIGHTYPC350LC-6 MIGHTY
Reference Bucket Capacity1.8 yd31.8 yd31.3 yd31.8 yd31.8 yd31.8 yd31.8 yd31.8 yd3

More in Komatsu: PC300-1: N-855-C engine installation/three stick options, PC210LCi-10/PC270-8: controls/tracks, PC290LC-11/PC360LC-11/PC390LC-10 specs.