Machine models
CASE 580M, 580 Super M and 590 Super M+ configurations
580M dimensions: bucket reach, carrying height and transport
The 580M Series 3 sheet measures dump reach in inches with the loader fully raised and the bucket tipped. It is not a reach of twenty-eight feet. The same drawing separates the bucket hinge-pin height from the top of the raised bucket.
A truck's loading edge needs to be compared with dump clearance, with reach checked separately; overall operating height does not establish that the bucket clears the side.
General-purpose and four-in-one buckets also have different weights and lifting ratings. The Series 3 schedule lists an extra cutting-edge weight for the standard bucket and separate capacities for the multipurpose bucket. Its base-machine weight uses two-wheel drive, a canopy and a standard dipper.
Cab, Extendahoe and four-wheel-drive equipment appear in the heavier configuration. Compare complete arrangements before using the lightest published weight to choose a trailer. Source: CASE 580M Series 3 technical sheet CCE1300801.
Super M equipment is not identified by the last letter alone
The M Series 3 brochure distinguishes the Super M+ piston-pump system from the other configurations. Ride Control is standard on the Plus models and optional on the others. Pilot controls add a pattern choice and one-touch idle function; they are equipment to identify on the particular backhoe, not assumptions to make from a similar paint scheme.
Its anti-rebound swing feature cushions quick stops, while the loader's self-leveling action serves a different purpose during lifting. Source: original CASE M Series 3 brochure CCE12040701R, within equipment collection.
For service fills, the 2010 operator manual separates a plain 580M from the Super M fuel tank and distinguishes the hydraulic reservoir from the complete system. Extendahoe increases the system quantity. Those headings matter as much as the numbers: a reservoir-and-filter service does not drain every cylinder and line.
The manual also gives separate cooling quantities with and without a heater. Source: CASE operator manual 84287120NA, capacities.
| Model and field | Earlier entry | Original-document condition |
|---|---|---|
| 580M Reach At Max Dump Height | 28.17 ft | Earlier28.17ft attribution rejected; Series3 GP-bucket drawing28.2in (717mm),separate edition |
| 580N Dig Depth | 175.6 in | 6.1 in (155 mm),loader bucket-flat below grade;2023USbrochure |
| 580 Super M Series III Displacement | 272 cu in | 274 cu in (4.5 L),2010 operator schedule |
| 580M Series III Displacement | 272 cu in | 274 cu in (4.5 L),CCE1300801 technical sheet |
| 580 Super M Series III Fuel Capacity | 31.4 gal | 42 US gal (159 L),2010 operator schedule |
| 580 Super M Series III Hydraulic System Fluid Capacity | 29.5 gal | 29.45 US gal (111.5 L) total;30.95 US gal (117.2 L) with Extendahoe |
| 580M Series III Hydraulic System Fluid Capacity | 27.5 gal | 25.95 US gal (98.2 L) total;27.45 US gal (103.9 L) with Extendahoe |
| 580N Bucket Digging Force (ISO) | 113 lb | Earlier113lb ISO attribution unverified; 2023CaseUSbrochure backhoe bucket force11517lbf (51.2kN) |
| 580N Bucket Breakout Force, SAE | 11,516,512 lb | 11517 lbf (51.2 kN),backhoe bucket force in2023CaseUSbrochure;earlier SAE attribution unverified |
| Listing-entry count |
|---|
| 7 |
Short answer
CASE 580M, 580 Super M and 590 Super M+ configurations: backhoe loaders.
| Configuration | Documented field and quantity |
|---|---|
| 580 Super M |
|
| 580 Super M Series III |
|
| 580M |
|
| 580M Series III |
|
| 580M TURBO |
|
| 580N |
|
| 590 Super M+ Series III |
|
| Publisher name | Source guide | Listing-entry count | Labels named by the source |
|---|---|---|---|
| CASE | 580 Super M to 590 Super M+ Series III Backhoe | 7 | 580 Super M, 580 Super M Series III, 580M, 580M Series III, 580M TURBO, 580N, and 1 more |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Load Height - Std | 11.17 ft | 11.17 ft | 11.17 ft | 11.17 ft | 11.17 ft | 11.78 ft | 11.42 ft |
| Reach From Swivel - Std | 18.08 ft | 18.08 ft | 17.83 ft | 17.83 ft | 17.83 ft | 18.28 ft | 19.66 ft |
| Dig Depth - Std | 14.42 ft | 14.42 ft | 14.25 ft | 14.25 ft | 14.25 ft | 14.77 ft | 15.92 ft |
| Reach At Load Height - Std | 8.75 ft | 8.75 ft | 8.75 ft | 8.75 ft | 8.75 ft | 6.7 ft | 9.52 ft |
| Load Height - Ext | 13.25 ft | 13.25 ft | 13.25 ft | 13.25 ft | 13.25 ft | 14.11 ft | 13.75 ft |
| Dig Depth - Ext | 18.25 ft | 18.25 ft | 18.25 ft | 18.25 ft | 18.25 ft | 18.21 ft | 19.92 ft |
| Reach At Load Height - Ext | 11.5 ft | 11.5 ft | 11.5 ft | 11.5 ft | 11.5 ft | 9.32 ft | 12.77 ft |
| Reach From Swivel - Ext | 21.83 ft | 21.83 ft | 21.83 ft | 21.83 ft | 21.83 ft | 21.66 ft | 23.59 ft |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 590 Super M+ Series III |
|---|---|---|---|---|---|---|
| Bucket Dig Force - Ext | 12,821 lb | 12,821 lb | 11,212 lb | 11,212 lb | 11,212 lb | 14,718 lb |
| Bucket Dig Force - Std | 12,821 lb | 12,821 lb | 11,212 lb | 11,212 lb | 11,212 lb | 14,718 lb |
| Load At Max Lift - Ext | 1,350 lb | 1,350 lb | 810 lb | 810 lb | 810 lb | 1,940 lb |
| Load At Max Lift - Std | 2,750 lb | 2,750 lb | 1,950 lb | 1,950 lb | 1,950 lb | 3,309 lb |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Transport Length | 22.83 ft | 22.83 ft | 23.17 ft | 23.17 ft | 23.17 ft | 23.43 ft | 23.59 ft |
| Transport Width | 7.17 ft | 7.17 ft | 7.17 ft | 7.17 ft | 7.17 ft | 6.8 ft | 7.75 ft |
| Transport Height | 13.92 ft | 10.8 ft | 11.25 ft | 11.23 ft | 13.67 ft | 10.83 ft | 11.62 ft |
| Wheelbase | 7.04 ft | 7.04 ft | 7.04 ft | 7.04 ft | 7.04 ft | 6.99 ft | 7.06 ft |
| Ground Clearance | 1.22 ft | 1.22 ft | 1.24 ft | 1.24 ft | 1.24 ft | 1.25 ft | 1.24 ft |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 590 Super M+ Series III |
|---|---|---|---|---|---|---|
| Height To Top Of Suspended Cab | 8.83 ft | 8.83 ft | 8.92 ft | 8.92 ft | 8.92 ft | 8.83 ft |
| Specification | 580N |
|---|---|
| Height To Top Of Cab | 107.09 in |
| Tailswing Radius | 11.32 ft |
| Operating Weight | 17751 Ibs (8052) kg (4WD) |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Clearance At Max Dump Height | 8.83 ft | 8.83 ft | 8.67 ft | 8.67 ft | 8.67 ft | 8.83 ft | 9.03 ft |
| Reach At Max Dump Height | 2.5 ft | 2.5 ft | Earlier28.17ft attribution rejected; Series3 GP-bucket drawing28.2in (717mm),separate edition | 2.35 ft | 2.35 ft | 2.63 ft | 2.3 ft |
| Dig Depth | 5.9 in | 5.9 in | 7.8 in | 7.8 in | 7.8 in | 6.1 in (155 mm),loader bucket-flat below grade;2023USbrochure | 3.78 in |
| Bucket Breakout Force | 9,164 lb | 9,164 lb | 9,164 lb | 9,164 lb | 9,164 lb | 10,622 lb | 10,729 lb |
| Bucket Width | 82 in | 82 in | 82 in | 82 in | 82 in | 82 in | 93 in |
| Bucket Capacity | 0.87 yd3 | 1.03 yd3 | 0.87 yd3 | 1.03 yd3 | 0.87 yd3 | 0.88 yd3 | 1.3 yd3 |
| Lift Capacity At Full Height | 6,182 lb | 6,182 lb | 6,182 lb | 6,182 lb | 6,182 lb | 6,803 lb | 7,326 lb |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Number Of Cylinders | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Engine Model | Family III 445T/M2, Tier II certified | Family IV 445TA/E3, Tier III certified | Family III 445/M2, Tier II certified | Family III 445T/M3, Tier III certified | Family III 445T/M2, Tier II certified | FPT F5BFL413C | Family IV 445TA/E3 diesel, Tier III certified |
| Gross Power | 95 hp | 96.6 hp | 80 hp | 85 hp | 85 hp | 89.9 hp | 110 hp |
| Net Power | 90 hp | 91.2 hp | 76 hp | 79.2 hp | 80 hp | 83.2 hp | 108.7 hp |
| Power Measured @ | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm |
| Torque Measured @ | 1,500 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm |
| Net Max Torque | 289 lb-ft | 329 lb-ft | 231 lb-ft | 271 lb-ft | 246 lb-ft | 306.1 lb-ft | 372 lb-ft |
| Aspiration | turbocharged | turbocharged | Natural | turbocharged | turbocharged | Turbocharged | Turbocharged |
| Displacement | 272 cu in | 274 cu in (4.5 L),2010 operator schedule | 272 cu in | 274 cu in (4.5 L),CCE1300801 technical sheet | 272 cu in | 207.5 cu in | 274.7 cu in |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 590 Super M+ Series III |
|---|---|---|---|---|---|---|
| Net Torque Rise | 29 % | 45 % | 23 % | 36 % | 33 % | 45 % |
| Specification | 580N |
|---|---|
| Emissions Certification | Tier 4 Final |
| Fuel Tank | 34.9 gal |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N |
|---|---|---|---|---|---|---|
| Operating Weight 2wd | 14,285 lb | 14,285 lb | 13,359 lb | 13,360 lb | 13,359 lb | 14,564 lb |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Fuel Capacity | 31.4 gal | 42 US gal (159 L),2010 operator schedule | 31.4 gal | 31.4 gal | 31.4 gal | 42.1 gal | 42.1 gal |
| Max Weight | 17,545 lb | 17,545 lb | 16,510 lb | 16,510 lb | 16,510 lb | 17,454 lb | 19,579 lb |
| Hydraulic System Fluid Capacity | 31.5 gal | 29.45 US gal (111.5 L) total;30.95 US gal (117.2 L) with Extendahoe | 28 gal | 25.95 US gal (98.2 L) total;27.45 US gal (103.9 L) with Extendahoe | 28 gal | 28.1 gal | 33.8 gal |
| Oil System Fluid Capacity | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal |
| Cooling System Fluid Capacity | 4.8 gal | 4.8 gal | 4.5 gal | 4.5 gal | 4.5 gal | 4.5 gal | 4.8 gal |
| Transmission Fluid Capacity | 5.5 gal | 5.2 gal | 5.5 gal | 5.2 gal | 5.5 gal | 5.1 gal | 5.2 gal |
| Front Axle Fluid Capacity | 1.5 gal | 1.5 gal | 1.5 gal | 1.5 gal | 1.5 gal | 2.1 gal | 1.8 gal |
| Rear Axle Fluid Capacity | 3.8 gal | 3.6 gal | 3.8 gal | 3.6 gal | 3.8 gal | 3.6 gal | 5 gal |
| Turning Radius | 11 ft | 11 ft | 11 ft | 11 ft | 21.3 ft | 11.4 ft | 12.4 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11L x 16 / 12x 16.5 | 14.5/75x16.1 10ply / 14x17.5 10 ply |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5x24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 19.5L x 24 | 21Lx24 10 ply / 21Lx24 10ply |
| Operating Voltage | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V |
| Alternator Supplied Amperage | 90 amps | 90 amps | 90 amps | 90 amps | 90 amps | 120 amps | 90 amps |
| Specification | 580N |
|---|---|
| Backhoe Flow- Gallons | 28.6 gpm |
| Arm Breakout Force | 9,487 lb |
| Specification | 580N | 590 Super M+ Series III |
|---|---|---|
| Operating Weight 4wd | 15,862 lb | 15,269 lb |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | Power shuttle | synchromesh |
| Number Of Forward Gears | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Number Of Reverse Gears | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Max Speed - Forward | 25.5 mph | 26.1 mph | 24.5 mph | 24.3 mph | 24.5 mph | 24.3 mph | 25.6 mph |
| Max Speed Reverse | 30.8 mph | 31.6 mph | 29.6 mph | 29.2 mph | 29.7 mph | 29.1 mph | 30.7 mph |
| Specification | 580N |
|---|---|
| Max Speed | 24.6 mph |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Pump Type | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | Parker P330 Single Selection Gear | Piston, variable displacement |
| Pump Flow Capacity | 28.5 gpm | 38.1 gpm | 28.5 gpm | 28.5 gpm | 28.5 gpm | 28.5 gpm | 42.6 gpm |
| Relief Valve Pressure | 3,050 psi | 3,050 psi | 3,050 psi | 3,050 psi | 3,050 psi | 3,350 psi | 3,000 psi |
| Specification | 580N |
|---|---|
| Loader Bucket Heaped Capacity | 1.1 yd3 |
| Dipper Stick Digging Force | 6,628 lb |
| Bucket Digging Force (ISO) | Earlier113lb ISO attribution unverified; 2023CaseUSbrochure backhoe bucket force11517lbf (51.2kN) |
| Bucket Breakout Force, SAE | 11517 lbf (51.2 kN),backhoe bucket force in2023CaseUSbrochure;earlier SAE attribution unverified |
| Specification | 580N |
|---|---|
| Front | 12L x 16.5 (4WD) |
| Specification | 580N |
|---|---|
| Service Brake | Wet Multi Disc |
| Source guide | Differing-field count reported |
|---|---|
| 580 Super M to 590 Super M+ Series III Backhoe | 66 |
| Figure | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Engine horsepower per 1,000 lb of weight | 6.3 | 6.4 | 5.7 | 5.9 | 6.0 | 5.7 | 7.1 |
| Pump flow per engine horsepower | 0.32 gpm | 0.42 gpm | 0.38 gpm | 0.36 gpm | 0.36 gpm | 0.34 gpm | 0.39 gpm |
| Fuel tank per engine horsepower | 0.35 gal | 0.34 gal | 0.41 gal | 0.40 gal | 0.39 gal | 0.42 gal | 0.39 gal |
580 Super M to 590 Super M+ Series III Backhoe: owner reports
Related account: “Hydraulic power, leaks and steering pump”; “Overheating gauge, diagnostic codes and transmission rebuild”: 480E to 590SL.
History and service record of 580 Super M to 590 Super M+ Series III Backhoe
- Engines and series. A parts dealer's specification page says the Case 580 Super M is the turbocharged version of the M-generation small-frame backhoe loader, using turbo versions of the 445T/M engine on Series I, the 445T/M2 on Series II and an F4HE turbo on Series III, while the 580M uses naturally aspirated versions of the same blocks. Case 580 Super M backhoe loader specs, Broken Tractor.
- Series II and III boundary. The same dealer notes that a boom cylinder labelled for the 580 Super M Series II and III marks the boundary between those series and Series I, which uses a different cylinder. Case 580 Super M backhoe loader specs, Broken Tractor.
- One service manual for Series 3. A manual seller describes a 1,467-page factory service manual covering the Case Series 3 loader backhoes, the 580M, 580 Super M, 580 Super M+, 590 Super M and 590 Super M+, including engine, fuel, electrical, steering and power train. Case 580M to 590 Super M Plus Series 3 loader backhoe service manual, YouFixThis.
- Series III spec sheet. Case's spec sheet for the 580 Super M Series 3 lists a Tier III certified engine, bi-directional backhoe flow variable from 0 to 38 gpm (144 L/min), a 12-volt system with a 90 amp alternator and outboard wet-disc service brakes, two per side. 580 Super M Series 3 loader/backhoe specification sheet, Case.
- Transport size. The spec sheet gives a transport length of 22 ft 10 in with the general purpose bucket, a width of 7 ft 2 in, a height of 8 ft 9 in to the top of the canopy, and 14.6 in of ground clearance at the backhoe frame. 580 Super M Series 3 loader/backhoe specification sheet, Case.
| Forum index | Equipment class queried | Names in the search | Matching titles |
|---|---|---|---|
| Heavy Equipment Forums | backhoe loader | CASE and the 580 SUPER M SERIES, 580M SERIES, 590 SUPER M SERIES line that the 580 Super M Backhoe, 580 Super M Series III Backhoe, 580M Backhoe, 580M Series III Backhoe belongs to (no title names the exact model) | 207 |
| Title topic | Titles |
|---|---|
| hydraulics | 27 |
| electrical and sensors | 18 |
| transmission and drive | 16 |
| Topic in the title | Threads | Share of matching threads |
|---|---|---|
| hydraulics | 27 | 13% |
| electrical and sensors | 18 | 9% |
| transmission and drive | 16 | 8% |
| fuel system | 10 | 5% |
| parts and manuals | 10 | 5% |
- Mounting Diverter Splitter Valve Case 580 Super M (Heavy Equipment Forums, 2026-08-29)
- Case 580m Series 1 Transmission Issues (Heavy Equipment Forums, 2026-07-30)
- Stabilizer Extendahoe Not Working On Case Backhoe 2005 580 Super M Series 2 (Heavy Equipment Forums, 2026-07-05)
- Need Images Of The 2003 Case 580 Super M And 2011 Super N Dashboard Indicator Lights Please (Heavy Equipment Forums, 2026-03-21)
| Observation date | Listing source | Equipment search | Listings |
|---|---|---|---|
| 2026-09-24 | MachineryTrader | CASE backhoe loader | 53 |
| Model | Listed | Model years | Lowest asking | Highest asking | Median asking | Median hours |
|---|---|---|---|---|---|---|
| 580M Backhoe | 5 | 2003 to 2006 | $28,500 | $34,500 | $32,500 | 4,200 |
| 580M TURBO Backhoe | 2 | 2000 to 2007 | $39,900 | $55,995 | $47,948 | None shown |
| 580N Backhoe | 46 | 2010 to 2025 | $37,750 | $82,000 | $57,500 | 72,500 |
| Search date | Database | Names queried | Search result |
|---|---|---|---|
| 2026-09-24 | U.S. Consumer Product Safety Commission | CASE together with the backhoe loader 580 Super M, 580 Super M Series III, 580M, 580M Series III | No matching recall in this search |
| Evidence class | Document, classification and recorded date |
|---|---|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Reference site |
|
| Forum threads |
|
| Published history |
|
| Published history |
|
| Published history |
|
| Used-market listings |
|
| Federal agency data |
|
| Guide | As-listed machine class |
|---|---|
| CASE 580M, 580 Super M and 590 Super M+ configurations | backhoe loader |
CASE 580M, 580 Super M and 590 Super M+ configurations: Configuration records
580 Super M
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.17 ft |
| Reach From Swivel - Std | 18.08 ft |
| Dig Depth - Std | 14.42 ft |
| Reach At Load Height - Std | 8.75 ft |
| Load Height - Ext | 13.25 ft |
| Bucket Dig Force - Ext | 12,821 lb |
| Bucket Dig Force - Std | 12,821 lb |
| Dig Depth - Ext | 18.25 ft |
| Reach At Load Height - Ext | 11.5 ft |
| Load At Max Lift - Ext | 1,350 lb |
| Load At Max Lift - Std | 2,750 lb |
| Reach From Swivel - Ext | 21.83 ft |
| Dimensions and weight | |
| Transport Length | 22.83 ft |
| Transport Width | 7.17 ft |
| Transport Height | 13.92 ft |
| Wheelbase | 7.04 ft |
| Ground Clearance | 1.22 ft |
| Height To Top Of Suspended Cab | 8.83 ft |
| Loader | |
| Clearance At Max Dump Height | 8.83 ft |
| Reach At Max Dump Height | 2.5 ft |
| Dig Depth | 5.9 in |
| Bucket Breakout Force | 9,164 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 0.87 yd3 |
| Lift Capacity At Full Height | 6,182 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445T/M2, Tier II certified |
| Gross Power | 95 hp |
| Net Power | 90 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,500 rpm |
| Net Torque Rise | 29 % |
| Net Max Torque | 289 lb-ft |
| Aspiration | turbocharged |
| Displacement | 272 cu in |
| Operational | |
| Operating Weight 2wd | 14,285 lb |
| Fuel Capacity | 31.4 gal |
| Max Weight | 17,545 lb |
| Hydraulic System Fluid Capacity | 31.5 gal |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.8 gal |
| Transmission Fluid Capacity | 5.5 gal |
| Front Axle Fluid Capacity | 1.5 gal |
| Rear Axle Fluid Capacity | 3.8 gal |
| Turning Radius | 11 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5x24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Transmission and speeds | |
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 25.5 mph |
| Max Speed Reverse | 30.8 mph |
| Hydraulic | |
| Pump Type | gear-type, transmission driven |
| Pump Flow Capacity | 28.5 gpm |
| Relief Valve Pressure | 3,050 psi |
580 Super M Series III
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.17 ft |
| Reach From Swivel - Std | 18.08 ft |
| Dig Depth - Std | 14.42 ft |
| Reach At Load Height - Std | 8.75 ft |
| Load Height - Ext | 13.25 ft |
| Bucket Dig Force - Ext | 12,821 lb |
| Bucket Dig Force - Std | 12,821 lb |
| Dig Depth - Ext | 18.25 ft |
| Reach At Load Height - Ext | 11.5 ft |
| Load At Max Lift - Ext | 1,350 lb |
| Load At Max Lift - Std | 2,750 lb |
| Reach From Swivel - Ext | 21.83 ft |
| Dimensions and weight | |
| Transport Length | 22.83 ft |
| Transport Width | 7.17 ft |
| Transport Height | 10.8 ft |
| Wheelbase | 7.04 ft |
| Ground Clearance | 1.22 ft |
| Height To Top Of Suspended Cab | 8.83 ft |
| Loader | |
| Clearance At Max Dump Height | 8.83 ft |
| Reach At Max Dump Height | 2.5 ft |
| Dig Depth | 5.9 in |
| Bucket Breakout Force | 9,164 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 1.03 yd3 |
| Lift Capacity At Full Height | 6,182 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family IV 445TA/E3, Tier III certified |
| Gross Power | 96.6 hp |
| Net Power | 91.2 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Torque Rise | 45 % |
| Net Max Torque | 329 lb-ft |
| Aspiration | turbocharged |
| Displacement | 274 cu in (4.5 L),2010 operator schedule |
| Operational | |
| Operating Weight 2wd | 14,285 lb |
| Fuel Capacity | 42 US gal (159 L),2010 operator schedule |
| Max Weight | 17,545 lb |
| Hydraulic System Fluid Capacity | 29.45 US gal (111.5 L) total;30.95 US gal (117.2 L) with Extendahoe |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.8 gal |
| Transmission Fluid Capacity | 5.2 gal |
| Front Axle Fluid Capacity | 1.5 gal |
| Rear Axle Fluid Capacity | 3.6 gal |
| Turning Radius | 11 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Transmission and speeds | |
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 26.1 mph |
| Max Speed Reverse | 31.6 mph |
| Hydraulic | |
| Pump Type | gear-type, transmission driven |
| Pump Flow Capacity | 38.1 gpm |
| Relief Valve Pressure | 3,050 psi |
580M
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.17 ft |
| Reach From Swivel - Std | 17.83 ft |
| Dig Depth - Std | 14.25 ft |
| Reach At Load Height - Std | 8.75 ft |
| Load Height - Ext | 13.25 ft |
| Bucket Dig Force - Ext | 11,212 lb |
| Bucket Dig Force - Std | 11,212 lb |
| Dig Depth - Ext | 18.25 ft |
| Reach At Load Height - Ext | 11.5 ft |
| Load At Max Lift - Ext | 810 lb |
| Load At Max Lift - Std | 1,950 lb |
| Reach From Swivel - Ext | 21.83 ft |
| Dimensions and weight | |
| Transport Length | 23.17 ft |
| Transport Width | 7.17 ft |
| Transport Height | 11.25 ft |
| Wheelbase | 7.04 ft |
| Ground Clearance | 1.24 ft |
| Height To Top Of Suspended Cab | 8.92 ft |
| Loader | |
| Clearance At Max Dump Height | 8.67 ft |
| Dump-Reach Reference and Series3 Drawing — Earlier28.17ft rejected;laterSeries3dimension is explicitlyseparateedition. | Earlier28.17ft attribution rejected; Series3 GP-bucket drawing28.2in (717mm),separate edition |
| Dig Depth | 7.8 in |
| Bucket Breakout Force | 9,164 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 0.87 yd3 |
| Lift Capacity At Full Height | 6,182 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445/M2, Tier II certified |
| Gross Power | 80 hp |
| Net Power | 76 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Torque Rise | 23 % |
| Net Max Torque | 231 lb-ft |
| Aspiration | Natural |
| Displacement | 272 cu in |
| Operational | |
| Operating Weight 2wd | 13,359 lb |
| Fuel Capacity | 31.4 gal |
| Max Weight | 16,510 lb |
| Hydraulic System Fluid Capacity | 28 gal |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.5 gal |
| Transmission Fluid Capacity | 5.5 gal |
| Front Axle Fluid Capacity | 1.5 gal |
| Rear Axle Fluid Capacity | 3.8 gal |
| Turning Radius | 11 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Transmission and speeds | |
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.5 mph |
| Max Speed Reverse | 29.6 mph |
| Hydraulic | |
| Pump Type | gear-type, transmission driven |
| Pump Flow Capacity | 28.5 gpm |
| Relief Valve Pressure | 3,050 psi |
580M Series III
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.17 ft |
| Reach From Swivel - Std | 17.83 ft |
| Dig Depth - Std | 14.25 ft |
| Reach At Load Height - Std | 8.75 ft |
| Load Height - Ext | 13.25 ft |
| Bucket Dig Force - Ext | 11,212 lb |
| Bucket Dig Force - Std | 11,212 lb |
| Dig Depth - Ext | 18.25 ft |
| Reach At Load Height - Ext | 11.5 ft |
| Load At Max Lift - Ext | 810 lb |
| Load At Max Lift - Std | 1,950 lb |
| Reach From Swivel - Ext | 21.83 ft |
| Dimensions and weight | |
| Transport Length | 23.17 ft |
| Transport Width | 7.17 ft |
| Transport Height | 11.23 ft |
| Wheelbase | 7.04 ft |
| Ground Clearance | 1.24 ft |
| Height To Top Of Suspended Cab | 8.92 ft |
| Loader | |
| Clearance At Max Dump Height | 8.67 ft |
| Reach At Max Dump Height | 2.35 ft |
| Dig Depth | 7.8 in |
| Bucket Breakout Force | 9,164 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 1.03 yd3 |
| Lift Capacity At Full Height | 6,182 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445T/M3, Tier III certified |
| Gross Power | 85 hp |
| Net Power | 79.2 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Torque Rise | 36 % |
| Net Max Torque | 271 lb-ft |
| Aspiration | turbocharged |
| Displacement | 274 cu in (4.5 L),CCE1300801 technical sheet |
| Operational | |
| Operating Weight 2wd | 13,360 lb |
| Fuel Capacity | 31.4 gal |
| Max Weight | 16,510 lb |
| Hydraulic System Fluid Capacity | 25.95 US gal (98.2 L) total;27.45 US gal (103.9 L) with Extendahoe |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.5 gal |
| Transmission Fluid Capacity | 5.2 gal |
| Front Axle Fluid Capacity | 1.5 gal |
| Rear Axle Fluid Capacity | 3.6 gal |
| Turning Radius | 11 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Transmission and speeds | |
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.3 mph |
| Max Speed Reverse | 29.2 mph |
| Hydraulic | |
| Pump Type | gear-type, transmission driven |
| Pump Flow Capacity | 28.5 gpm |
| Relief Valve Pressure | 3,050 psi |
580M TURBO
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.17 ft |
| Reach From Swivel - Std | 17.83 ft |
| Dig Depth - Std | 14.25 ft |
| Reach At Load Height - Std | 8.75 ft |
| Load Height - Ext | 13.25 ft |
| Bucket Dig Force - Ext | 11,212 lb |
| Bucket Dig Force - Std | 11,212 lb |
| Dig Depth - Ext | 18.25 ft |
| Reach At Load Height - Ext | 11.5 ft |
| Load At Max Lift - Ext | 810 lb |
| Load At Max Lift - Std | 1,950 lb |
| Reach From Swivel - Ext | 21.83 ft |
| Dimensions and weight | |
| Transport Length | 23.17 ft |
| Transport Width | 7.17 ft |
| Transport Height | 13.67 ft |
| Wheelbase | 7.04 ft |
| Ground Clearance | 1.24 ft |
| Height To Top Of Suspended Cab | 8.92 ft |
| Loader | |
| Clearance At Max Dump Height | 8.67 ft |
| Reach At Max Dump Height | 2.35 ft |
| Dig Depth | 7.8 in |
| Bucket Breakout Force | 9,164 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 0.87 yd3 |
| Lift Capacity At Full Height | 6,182 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family III 445T/M2, Tier II certified |
| Gross Power | 85 hp |
| Net Power | 80 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Torque Rise | 33 % |
| Net Max Torque | 246 lb-ft |
| Aspiration | turbocharged |
| Displacement | 272 cu in |
| Operational | |
| Operating Weight 2wd | 13,359 lb |
| Fuel Capacity | 31.4 gal |
| Max Weight | 16,510 lb |
| Hydraulic System Fluid Capacity | 28 gal |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.5 gal |
| Transmission Fluid Capacity | 5.5 gal |
| Front Axle Fluid Capacity | 1.5 gal |
| Rear Axle Fluid Capacity | 3.8 gal |
| Turning Radius | 21.3 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5Lx24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Transmission and speeds | |
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.5 mph |
| Max Speed Reverse | 29.7 mph |
| Hydraulic | |
| Pump Type | gear-type, transmission driven |
| Pump Flow Capacity | 28.5 gpm |
| Relief Valve Pressure | 3,050 psi |
580N
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.78 ft |
| Reach From Swivel - Std | 18.28 ft |
| Dig Depth - Std | 14.77 ft |
| Reach At Load Height - Std | 6.7 ft |
| Load Height - Ext | 14.11 ft |
| Dig Depth - Ext | 18.21 ft |
| Reach At Load Height - Ext | 9.32 ft |
| Reach From Swivel - Ext | 21.66 ft |
| Dimensions and weight | |
| Transport Length | 23.43 ft |
| Transport Width | 6.8 ft |
| Transport Height | 10.83 ft |
| Wheelbase | 6.99 ft |
| Ground Clearance | 1.25 ft |
| Height To Top Of Cab | 107.09 in |
| Tailswing Radius | 11.32 ft |
| Operating Weight | 17751 Ibs (8052) kg (4WD) |
| Loader | |
| Clearance At Max Dump Height | 8.83 ft |
| Reach At Max Dump Height | 2.63 ft |
| Dig Depth | 6.1 in (155 mm),loader bucket-flat below grade;2023USbrochure |
| Bucket Breakout Force | 10,622 lb |
| Bucket Width | 82 in |
| Bucket Capacity | 0.88 yd3 |
| Lift Capacity At Full Height | 6,803 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | FPT F5BFL413C |
| Gross Power | 89.9 hp |
| Net Power | 83.2 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Max Torque | 306.1 lb-ft |
| Aspiration | Turbocharged |
| Displacement | 207.5 cu in |
| Emissions Certification | Tier 4 Final |
| Fuel Tank | 34.9 gal |
| Operational | |
| Operating Weight 2wd | 14,564 lb |
| Fuel Capacity | 42.1 gal |
| Max Weight | 17,454 lb |
| Hydraulic System Fluid Capacity | 28.1 gal |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.5 gal |
| Transmission Fluid Capacity | 5.1 gal |
| Front Axle Fluid Capacity | 2.1 gal |
| Rear Axle Fluid Capacity | 3.6 gal |
| Turning Radius | 11.4 ft |
| Tire Size Front - 2wd / 4wd | 11L x 16 / 12x 16.5 |
| Rear Tires Size 2wd/4wd | 19.5L x 24 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 120 amps |
| Backhoe Flow- Gallons | 28.6 gpm |
| Arm Breakout Force | 9,487 lb |
| Operating Weight 4wd | 15,862 lb |
| Transmission and speeds | |
| Transmission Type | Power shuttle |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 24.3 mph |
| Max Speed Reverse | 29.1 mph |
| Max Speed | 24.6 mph |
| Hydraulic | |
| Pump Type | Parker P330 Single Selection Gear |
| Pump Flow Capacity | 28.5 gpm |
| Relief Valve Pressure | 3,350 psi |
| Performance | |
| Loader Bucket Heaped Capacity | 1.1 yd3 |
| Dipper Stick Digging Force | 6,628 lb |
| Documented Backhoe Bucket Force; Earlier ISO Label Unverified — Quick-coupler/USbrochure force,not an independently verified ISO figure. | Earlier113lb ISO attribution unverified; 2023CaseUSbrochure backhoe bucket force11517lbf (51.2kN) |
| Backhoe Bucket Force (US Brochure) — EarlierSAEattribution unverified;not the separate frontloaderbucket breakout. | 11517 lbf (51.2 kN),backhoe bucket force in2023CaseUSbrochure;earlier SAE attribution unverified |
| Tires | |
| Front | 12L x 16.5 (4WD) |
| Brakes | |
| Service Brake | Wet Multi Disc |
590 Super M+ Series III
| Specification | Source figure |
|---|---|
| Backhoe | |
| Load Height - Std | 11.42 ft |
| Reach From Swivel - Std | 19.66 ft |
| Dig Depth - Std | 15.92 ft |
| Reach At Load Height - Std | 9.52 ft |
| Load Height - Ext | 13.75 ft |
| Bucket Dig Force - Ext | 14,718 lb |
| Bucket Dig Force - Std | 14,718 lb |
| Dig Depth - Ext | 19.92 ft |
| Reach At Load Height - Ext | 12.77 ft |
| Load At Max Lift - Ext | 1,940 lb |
| Load At Max Lift - Std | 3,309 lb |
| Reach From Swivel - Ext | 23.59 ft |
| Dimensions and weight | |
| Transport Length | 23.59 ft |
| Transport Width | 7.75 ft |
| Transport Height | 11.62 ft |
| Wheelbase | 7.06 ft |
| Ground Clearance | 1.24 ft |
| Height To Top Of Suspended Cab | 8.83 ft |
| Loader | |
| Clearance At Max Dump Height | 9.03 ft |
| Reach At Max Dump Height | 2.3 ft |
| Dig Depth | 3.78 in |
| Bucket Breakout Force | 10,729 lb |
| Bucket Width | 93 in |
| Bucket Capacity | 1.3 yd3 |
| Lift Capacity At Full Height | 7,326 lb |
| Engine | |
| Number Of Cylinders | 4 |
| Engine Model | Family IV 445TA/E3 diesel, Tier III certified |
| Gross Power | 110 hp |
| Net Power | 108.7 hp |
| Power Measured @ | 2,200 rpm |
| Torque Measured @ | 1,400 rpm |
| Net Torque Rise | 45 % |
| Net Max Torque | 372 lb-ft |
| Aspiration | Turbocharged |
| Displacement | 274.7 cu in |
| Operational | |
| Fuel Capacity | 42.1 gal |
| Max Weight | 19,579 lb |
| Hydraulic System Fluid Capacity | 33.8 gal |
| Oil System Fluid Capacity | 3.6 gal |
| Cooling System Fluid Capacity | 4.8 gal |
| Transmission Fluid Capacity | 5.2 gal |
| Front Axle Fluid Capacity | 1.8 gal |
| Rear Axle Fluid Capacity | 5 gal |
| Turning Radius | 12.4 ft |
| Tire Size Front - 2wd / 4wd | 14.5/75x16.1 10ply / 14x17.5 10 ply |
| Rear Tires Size 2wd/4wd | 21Lx24 10 ply / 21Lx24 10ply |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Operating Weight 4wd | 15,269 lb |
| Transmission and speeds | |
| Transmission Type | synchromesh |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 25.6 mph |
| Max Speed Reverse | 30.7 mph |
| Hydraulic | |
| Pump Type | Piston, variable displacement |
| Pump Flow Capacity | 42.6 gpm |
| Relief Valve Pressure | 3,000 psi |
Compare CASE 580 Super M, 580 Super M Series III, 580M, 580M Series III, 580M TURBO, 580N, 590 Super M+ Series III
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Load Height - Std | 11.17 ft | 11.17 ft | 11.17 ft | 11.17 ft | 11.17 ft | 11.78 ft | 11.42 ft |
| Reach From Swivel - Std | 18.08 ft | 18.08 ft | 17.83 ft | 17.83 ft | 17.83 ft | 18.28 ft | 19.66 ft |
| Dig Depth - Std | 14.42 ft | 14.42 ft | 14.25 ft | 14.25 ft | 14.25 ft | 14.77 ft | 15.92 ft |
| Reach At Load Height - Std | 8.75 ft | 8.75 ft | 8.75 ft | 8.75 ft | 8.75 ft | 6.7 ft | 9.52 ft |
| Load Height - Ext | 13.25 ft | 13.25 ft | 13.25 ft | 13.25 ft | 13.25 ft | 14.11 ft | 13.75 ft |
| Dig Depth - Ext | 18.25 ft | 18.25 ft | 18.25 ft | 18.25 ft | 18.25 ft | 18.21 ft | 19.92 ft |
| Reach At Load Height - Ext | 11.5 ft | 11.5 ft | 11.5 ft | 11.5 ft | 11.5 ft | 9.32 ft | 12.77 ft |
| Reach From Swivel - Ext | 21.83 ft | 21.83 ft | 21.83 ft | 21.83 ft | 21.83 ft | 21.66 ft | 23.59 ft |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Transport Length | 22.83 ft | 22.83 ft | 23.17 ft | 23.17 ft | 23.17 ft | 23.43 ft | 23.59 ft |
| Transport Width | 7.17 ft | 7.17 ft | 7.17 ft | 7.17 ft | 7.17 ft | 6.8 ft | 7.75 ft |
| Transport Height | 13.92 ft | 10.8 ft | 11.25 ft | 11.23 ft | 13.67 ft | 10.83 ft | 11.62 ft |
| Wheelbase | 7.04 ft | 7.04 ft | 7.04 ft | 7.04 ft | 7.04 ft | 6.99 ft | 7.06 ft |
| Ground Clearance | 1.22 ft | 1.22 ft | 1.24 ft | 1.24 ft | 1.24 ft | 1.25 ft | 1.24 ft |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Clearance At Max Dump Height | 8.83 ft | 8.83 ft | 8.67 ft | 8.67 ft | 8.67 ft | 8.83 ft | 9.03 ft |
| Reach At Max Dump Height | 2.5 ft | 2.5 ft | Earlier28.17ft attribution rejected; Series3 GP-bucket drawing28.2in (717mm),separate edition | 2.35 ft | 2.35 ft | 2.63 ft | 2.3 ft |
| Dig Depth | 5.9 in | 5.9 in | 7.8 in | 7.8 in | 7.8 in | 6.1 in (155 mm),loader bucket-flat below grade;2023USbrochure | 3.78 in |
| Bucket Breakout Force | 9,164 lb | 9,164 lb | 9,164 lb | 9,164 lb | 9,164 lb | 10,622 lb | 10,729 lb |
| Bucket Width | 82 in | 82 in | 82 in | 82 in | 82 in | 82 in | 93 in |
| Bucket Capacity | 0.87 yd3 | 1.03 yd3 | 0.87 yd3 | 1.03 yd3 | 0.87 yd3 | 0.88 yd3 | 1.3 yd3 |
| Lift Capacity At Full Height | 6,182 lb | 6,182 lb | 6,182 lb | 6,182 lb | 6,182 lb | 6,803 lb | 7,326 lb |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Number Of Cylinders | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Engine Model | Family III 445T/M2, Tier II certified | Family IV 445TA/E3, Tier III certified | Family III 445/M2, Tier II certified | Family III 445T/M3, Tier III certified | Family III 445T/M2, Tier II certified | FPT F5BFL413C | Family IV 445TA/E3 diesel, Tier III certified |
| Gross Power | 95 hp | 96.6 hp | 80 hp | 85 hp | 85 hp | 89.9 hp | 110 hp |
| Net Power | 90 hp | 91.2 hp | 76 hp | 79.2 hp | 80 hp | 83.2 hp | 108.7 hp |
| Power Measured @ | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm |
| Torque Measured @ | 1,500 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm | 1,400 rpm |
| Net Max Torque | 289 lb-ft | 329 lb-ft | 231 lb-ft | 271 lb-ft | 246 lb-ft | 306.1 lb-ft | 372 lb-ft |
| Aspiration | turbocharged | turbocharged | Natural | turbocharged | turbocharged | Turbocharged | Turbocharged |
| Displacement | 272 cu in | 274 cu in (4.5 L),2010 operator schedule | 272 cu in | 274 cu in (4.5 L),CCE1300801 technical sheet | 272 cu in | 207.5 cu in | 274.7 cu in |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Fuel Capacity | 31.4 gal | 42 US gal (159 L),2010 operator schedule | 31.4 gal | 31.4 gal | 31.4 gal | 42.1 gal | 42.1 gal |
| Max Weight | 17,545 lb | 17,545 lb | 16,510 lb | 16,510 lb | 16,510 lb | 17,454 lb | 19,579 lb |
| Hydraulic System Fluid Capacity | 31.5 gal | 29.45 US gal (111.5 L) total;30.95 US gal (117.2 L) with Extendahoe | 28 gal | 25.95 US gal (98.2 L) total;27.45 US gal (103.9 L) with Extendahoe | 28 gal | 28.1 gal | 33.8 gal |
| Oil System Fluid Capacity | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal | 3.6 gal |
| Cooling System Fluid Capacity | 4.8 gal | 4.8 gal | 4.5 gal | 4.5 gal | 4.5 gal | 4.5 gal | 4.8 gal |
| Transmission Fluid Capacity | 5.5 gal | 5.2 gal | 5.5 gal | 5.2 gal | 5.5 gal | 5.1 gal | 5.2 gal |
| Front Axle Fluid Capacity | 1.5 gal | 1.5 gal | 1.5 gal | 1.5 gal | 1.5 gal | 2.1 gal | 1.8 gal |
| Rear Axle Fluid Capacity | 3.8 gal | 3.6 gal | 3.8 gal | 3.6 gal | 3.8 gal | 3.6 gal | 5 gal |
| Turning Radius | 11 ft | 11 ft | 11 ft | 11 ft | 21.3 ft | 11.4 ft | 12.4 ft |
| Tire Size Front - 2wd / 4wd | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11Lx16.1/12x16.5 | 11L x 16 / 12x 16.5 | 14.5/75x16.1 10ply / 14x17.5 10 ply |
| Rear Tires Size 2wd/4wd | 17.5Lx24/19.5x24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 17.5Lx24/19.5Lx24 | 19.5L x 24 | 21Lx24 10 ply / 21Lx24 10ply |
| Operating Voltage | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V |
| Alternator Supplied Amperage | 90 amps | 90 amps | 90 amps | 90 amps | 90 amps | 120 amps | 90 amps |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Transmission Type | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | 4-speed synchromesh with hydraulically actuated clutches | Power shuttle | synchromesh |
| Number Of Forward Gears | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Number Of Reverse Gears | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Max Speed - Forward | 25.5 mph | 26.1 mph | 24.5 mph | 24.3 mph | 24.5 mph | 24.3 mph | 25.6 mph |
| Max Speed Reverse | 30.8 mph | 31.6 mph | 29.6 mph | 29.2 mph | 29.7 mph | 29.1 mph | 30.7 mph |
| Specification | 580 Super M | 580 Super M Series III | 580M | 580M Series III | 580M TURBO | 580N | 590 Super M+ Series III |
|---|---|---|---|---|---|---|---|
| Pump Type | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | gear-type, transmission driven | Parker P330 Single Selection Gear | Piston, variable displacement |
| Pump Flow Capacity | 28.5 gpm | 38.1 gpm | 28.5 gpm | 28.5 gpm | 28.5 gpm | 28.5 gpm | 42.6 gpm |
| Relief Valve Pressure | 3,050 psi | 3,050 psi | 3,050 psi | 3,050 psi | 3,050 psi | 3,350 psi | 3,000 psi |
More in CASE: 680K/680L/780D: refill boundaries/lift charts/component identity, 580 Super M+/590 Super M loader configurations, 580T: mechanical injection/twin pumps/loader capacities.